Mineral Geochemistry of Apatite in the Jiama PorphyrySkarn Deposit,Tibet and its Geological Significance

The Jiama deposit,a significant porphyry-skarn-type copper polymetallic deposit located within the Gangdese metallogenic belt in Tibet,China,exemplifies a typical porphyry metallogenic system.However,the mineral chemistry of its accessory minerals remains under-examined,posing challenges for resource assessment and ore prospecting.Utilizing electron microprobe analysis and LA-ICP-MS analysis,this study investigated the geochemical characteristics of apatite in ore-bearing granite and monzogranite porphyries,as well as granodiorite,quartz diorite,and dark diorite porphyries in the deposit.It also delved into the diagenetic and metallogenic information from these geochemical signatures.Key findings include:(1)The SiO_(2) content,rare earth element(REE)contents,and REE partition coefficients of apatite indicate that the dark diorite porphyry possibly does not share a cogenetic magma source with the other four types of porphyries;(2)the volatile F and Cl contents in apatite,along with their ratio,indicate the Jiama deposit,formed in a collisional setting,demonstrates lower Cl/F ratios in apatite than the same type of deposits formed in a subduction environment;(3)compared to non-ore-bearing rock bodies in other deposits formed in a collisional setting,apatite in the Jiama deposit exhibits lower Ce and Ga contents.This might indicate that rock bodies in the Jiama deposit have higher oxygen fugacity.Nevertheless,the marginal variation in oxygen fugacity between ore-bearing and non-ore-bearing rock bodies within the deposit suggests oxygen fugacity may not serve as the decisive factor in the ore-hosting potential of rock bodies in the Jiama deposit.

Reduced magma generation and its implications for the Pulang giant porphyry Cu-polymetallic deposit in Northwest Yunnan,China

The Pulang giant porphyry Cu-Mo polymetallic deposit is located in the Zhongdian area in the center of the Sanjiang Tethys tectonic domain,which was formed by the westward subduction of the Garze-Litang oceanic slab beneath the Zhongza massif.Chalcopyrite-pyrrhotite-pyritemolybdenite occurs as disseminations,veins,veinlets,and stockworks distributed in the K-silicate alteration zone in the monzonite porphyry,which is superimposed by propylitization.The chemical compositions of biotite and amphibole analyzed by electron probe microanalysis(EPMA)indicate that the ore-forming magma and exsolved fluids experienced a continuous decrease in the oxygen fugacity(fO_(2)).Primary amphibolite and biotite(type I)crystallized at relatively high temperatures(744-827°C)and low fO_(2)(log fO_(2)=−12.26 to−11.91)during the magmatic stage.Hydrothermal fluids exsolved from the magma have a relatively lower temperature(621-711°C)and fO_(2)(log fO_(2)=−14.36 to−13.32)than the original magma.In addition,the presence of a high abundance of pyrrhotite and an insufficiency of primary magnetite and sulfate in the ore(i.e.,anhydrite and gypsum)indicate that the deposit may be a reduced porphyry deposit.Magma and fluid fO_(2)results,combined with previous research on magmatic fO_(2)at the Pulang deposit,indicate that the magma associated with the reduced Pulang ore assemblages was initially generated as a highly oxidized magma that was subsequently reduced by sedimentary rocks of the Tumugou Formation.

Geochronology,Geochemistry and Petrogenesis of the Bangbule Quartz Porphyry:Implications for Metallogenesis

The Bangbule skarn lead-zinc(Pb-Zn)deposit(>1 Mt Zn+Pb)is located in the western Nyainqentanglha polymetallic metallogenetic belt,central Tibet.Lenticular orebodies are all hosted in skarn and developed in the contact zone between the quartz porphyry and carbonate strata of the mid Paleozoic Middle to Upper Chaguoluoma Formation as well as in carbonate and sandstone beds of the Upper Paleozoic Laga Formation.As a newly discovered skarn deposit,the geological background and metallogenesis of this deposit remain poorly understood.Detailed petrological,geochemical and geochronological data of the ore-related quartz porphyry,helps constrain the mineralization age and contributes to discussion on the ore genesis of the Bangbule deposit.Both endoskarn and exoskarn are identified in the Bangbule deposit.From quartz porphyry to carbonate formation,the exoskarn is zoned from proximal garnet skarn to distal pyroxene skarn.Zircon U-Pb dating results show that the quartz porphyry formed at 73.9±0.8 Ma.Geochemical analysis results show that the quartz porphyry has high contents of SiO_(2)(71.40–74.94 wt%)and K_(2)O+Na_(2)O(3.76–8.46 wt%)with A/CNK values of 0.69 to 1.06.Besides,the quartz porphyry is enriched in large ion lithophile elements(LILEs)and light rare earth elements(LREEs)and have lowεNd(t)(from-8.25 to-8.19)and high initial(^(87)Sr/^(86)Sr)i values(0.713611–0.714478).Major,trace elements and whole-rock F concentration analysis results from the endoskarn samples show higher TFe_(2)O_(3),MgO,CaO,Pb+Zn,W,Sn,Mo and F etc.,and lower alkalis(K_(2)O,Na_(2)O,Sr and Ba)than those of fresh quartz porphyry,indicating that the early ore-forming fluids were an Ca-Fe-F-enriched fluid.Massive ore in the proximal skarn might be related to the high F content in the magma,which lowered the solidus temperature of the quartz porphyry magma and caused a lower temperature of the ore-forming fluids,as well as facilitating the precipitation of sphalerite and galena.Based on the geochemical characteristics presented in this study,we propose that the ore-related quartz porphyry was formed by partial melting of crust materials with some juvenile crustal component input.The partial melting of the middle-upper crust after the initial enrichment of lead and zinc elements are important for the formation of Pb-Zn deposits.The case study of the Bangbule deposit has proven that there is still a crust-derived magmatic source region in the western segment of the central Lhasa terrane.Therefore,there is still great potential for Pb-Zn mineralization and Pb-Zn exploration.

Correction:Gardaneh Salavat porphyry copper system:Is it about metal endowment or fertility of the porphyritic intrusion?

Correction to:Acta Geochim(2022)41(3):496-514 https://doi.org/10.1007/s11631-022-00535-0 In the original publication of the article,under the section“4.1 Proposed hypothesis for Gardaneh Salavat porphyry system”,on page 509,the following sentence“Du and Audétat(2020)believed that early sulfide saturation is not necessarily detrimental to deposit formation or fertility of porphyritic intrusions.Further proving this fact”was included incorrectly.

Gardaneh Salavat porphyry copper system: Is it about metal endowment or fertility of the porphyritic intrusion?

Gardaneh Salavat porphyry copper system is located in the northwest of Iran. It comprises a quartz diorite to diorite porphyritic intrusion that created extensive alteration haloes in the host rocks. Despite all technical considerations, the exploration activities did not yield to ore discovery. As the matter of fact, all of the geological,geophysical, and geochemical characteristics of a porphyry Cu-Au deposit exist but there is no economic mineralization. Detailed examinations suggest that the only reasonable explanation can be related to the infertility or low metal endowment of the porphyritic intrusion. The reasons include(1) anomalous ranges of Cu, Au, and Mo rather than economic ore grades,(2) weakly development of potassic alteration,(3) probably sulfur saturation of magma that occurred before intrusion emplacement in the host rocks, and(4) probably low metal endowment in the regional scale and the lack of known porphyry copper deposits in close neighborhoods. It is tried to test the proposed hypothesis with the introduced fertility indicators based on major and trace element geochemistry. However,current fertility indicators could not prove or reject the proposed hypothesis for Gardaneh Salavat porphyritic intrusion because of the high-K calc-alkaline to shoshonitic nature of the intrusive rocks together with the unavailability of relatively fresh/unaltered samples. This case study is notable to examine because(1) it shows that characterization of fertile from barren intrusions seems to be as important as vectoring towards concealed porphyry copper deposits, especially while dealing with deep exploration targets that are associated with high financial risks, and(2) it highlights the inefficiencies and uncertainties in introduced magma fertility indicators for porphyry copper intrusions. As a result, it is of high importance to conduct an overarching investigation on other possible fertility indicators as a fundamental need for the future of the exploration industry.

Geology, geochronology, and exploration of the Jiama giant porphyry copper deposit (11 Mt), Tibet, China: A review

Jiama,with more than 11 Mt of copper metal,is the largest porphyry-skarn copper system in the Gangdese metallogenic belt,Tibet,China,creating ideal conditions for deciphering the origin of porphyry ores in a collision setting.Despite massive studies of the geology,chronology,petrogenesis,and ore-related fluids and their sources in Jiama,there is a lack of systematic summaries and reviews of this system.In contrast to traditional porphyry copper systems in a subduction setting,recent studies and exploration suggest that the Jiama deposit includes porphyry-type Mo-Cu,skarn-type Cu polymetallic,vein-type Au and manto orebodies.This paper reviews the latest studies on the geology,chronology,petrogenesis,fluid inclusions,and isotopic geochemistry(hydrogen,oxygen,sulfur,and lead)of the Jiama deposit.Accordingly,a multi-center complex mineralization model was constructed,indicating that multi-phase intrusions from the same magma reservoir can form multiple hydrothermal centers.These centers are mutually independent and form various orebodies or are superimposed on each other and form thick,high-grade orebodies.Finally,a new comprehensive exploration model was established for the Jiama porphyry copper system.Both models established in this study help to refine the theories on continental-collision metallogeny and porphyry copper systems.

Application of tensor CSAMT with high-power orthogonal signal sources in Jiama porphyry copper deposit,South Tibet

The Jiama porphyry copper deposit in Tibet is one of the proven supergiant copper deposits in the Qinghai-Tibet Plateau at present,with the reserves of geological resources equivalent to nearly 20×10^(6) t.However,it features wavy and steep terrain,leading to extremely difficult field operation and heavy interference.This study attempts to determine the effects of the tensor controlled-source audiomagnetotellurics(CSAMT)with high-power orthogonal signal sources(also referred to as the high-power tensor CSAMT)when it is applied to the deep geophysical exploration in plateaus with complex terrain and mining areas with strong interference.The test results show that the high current provided by the highpower tensor CSAMT not only greatly improved the signal-to-noise ratio but also guaranteed that effective signals were received in the case of a long transmitter-receiver distance.Meanwhile,the tensor data better described the anisotropy of deep geologic bodies.In addition,the tests also show that when the transmitting current reaches 60 A,it is still guaranteed that strong enough signals can be received in the case of the transmitter-receiver distance of about 25 km,sounding curves show no near field effect,and effective exploration depth can reach 3 km.The 2D inversion results are roughly consistent with drilling results,indicating that the high-power tensor CSAMT can be used to achieve nearly actual characteristics of underground electrical structures.Therefore,this method has great potential for application in deep geophysical exploration in plateaus and mining areas with complex terrain and strong interference,respectively.This study not only serves as important guidance on the prospecting in the Qinghai-Tibet Plateau but also can be used as positive references for deep mineral exploration in other areas.

Textural and compositional variation of mica from the Dexing porphyry Cu deposit:constraints on the behavior of halogens in porphyry systems

The Dexing porphyry deposit is the largest porphyry Cu–Mo–Au deposit in South China.Biotite composition can record the physicochemical conditions and evolution history of magmatic-hydrothermal system.Biotite from the Dexing porphyry deposit could be divided to three types:primary magmatic biotite(Bi-M),hydrothermal altered magmatic biotite(Bi-A)and hydrothermal biotite(Bi-H).The temperature of Bi-M and Bi-H range from 719 to 767℃ and 690 to 727℃,respectively.Both magmatic and hydrothermal biotite have high Fe^(3+)/Fe^(2+)ratios(from 0.18 to 0.24)and XMgvalues(from 0.57 to 0.66),indicating a high oxygen fugacity.BiM has F lower than Bi-A and Bi-H(up to 0.26 wt%),but has Cl(Cl=0.18–0.30 wt%)similar to Bi-A and Bi-H(Cl=0.21–0.35 wt%),suggesting that high Cl/F ratios of early hydrothermal fluid may result from the exsolution from high Cl magma.From potassic alteration zone to phyllic and propylitic alteration zones,Cl decreases with increasing Cu,whereas F increases roughly.Therefore,Cl mostly originate from magma,but enrichment of F possibly results from reaction of fluids and Neoproterozoic strata.Negative correlation between Cl and Cu indicates that Cl might act as an important catalyst during Cu mineralization process.Biotite from Dexing has similar halogen compositions to other porphyry Cu-/Mo deposits in the world.Chlorine contents of hydrothermal fluid may be critical for Cu transportation and enrichment,while consumption of Cl would promote Cu deposition.

Petrogenesis and Physicochemical Conditions of Fertile Porphyry in Non-arc Porphyry Mineralization:A Case from Habo Porphyry Cu-Mo Deposits,SW China

The Habo deposit is a typical porphyry Cu-Mo deposit in the Ailaoshan–Red River metallogenic belt.Ore minerals in the Habo deposit typically occur as veins in the monzonite porphyry.Zircon U-Pb dating suggests that the monzonite porphyry formed at 35.07±0.38 Ma.The monzonite porphyry is characterized by high SiO_(2),Al_(2)O_(3),K_(2)O and Na_(2)O contents,with A/CNK ratios ranging from 0.97 to 1.02.All samples exhibit fractionated REE patterns,characterized by high(La/Yb)N ratios(9.4–13.6,average of 11.2).They show adakite-like geochemical features,high Sr concentrations(627–751 ppm,average of 700 ppm),low Y concentrations(15.13–16.86 ppm,average of 15.81 ppm)and high Sr/Y values(39.5–47.4,average of 44.3).These samples have high initial^(87)Sr/^(86)Sr ratios(0.7074–0.7076)and negativeεNd(t)values(-5.1 to-3.7),whereas the zirconεHf(t)values range from-2.2 to+0.4,suggesting that the monzonite porphyry was derived from the partial melting of a thickened juvenile lower crust.The oxygen fugacity,calculated on the basis of the chemical composition of the amphiboles,shows?NNO values ranging from+1.65 to+2.16(average of 1.94)and lg(fO_(2))ranging from-12.72 to-11.99(average of-12.25),indicating that the monzonite porphyry has high oxygen fugacity.Zircons have high Ce^(4+)/Ce^(3+)ratios(29.29–164.24,average of 84.92),with high?FMQ values ranging from+0.50 to+1.51(average of 0.87)and high lg(fO_(2))values ranging from-14.72 to-12.85(average of-14.07),which also indicates that the oxygen fugacity of the magma was high.The dissolved water content of the Habo monzonite porphyry is 9.5–11.5 wt%,according to the geochemical characteristics,zircon-saturation thermometry(692–794°C)and the mineral phases(amphibole,no plagioclase)in the deep magma chamber.Combined with previous studies,we propose that the high oxygen fugacity and high water content of magma played key roles in controlling the formation of the Habo and other Cu-Mo-Au deposits in the Ailaoshan–Red River metallogenic belt.

Geology and mineralization of the Daheishan supergiant porphyry molybdenum deposit(1.65 Bt),Jilin,China:A review

The Daheishan supergiant porphyry molybdenum deposit(also referred to as the Daheishan deposit)is the second largest molybdenum deposit in Asia and ranks fifth among the top seven molybdenum deposits globally with total molybdenum reserves of 1.65 billion tons,an average molybdenum ore grade of 0.081%,and molybdenum resources of 1.09 million tons.The main ore body is housed in the granodiorite porphyry plutons and their surrounding inequigranular granodiorite plutons,with high-grade ores largely located in the ore-bearing granodiorite porphyries in the middle-upper part of the porphyry plutons.Specifically,it appears as an ore pipe with a large upper part and a small lower part,measuring about 1700 m in length and width,extending for about 500 m vertically,and covering an area of 2.3 km^(2).Mineralogically,the main ore body consists of molybdenite,chalcopyrite,and sphalerite horizontally from its center outward and exhibits molybdenite,azurite,and pyrite vertically from top to bottom.The primary ore minerals include pyrite and molybdenite,and the secondary ore minerals include sphalerite,chalcopyrite,tetrahedrite,and scheelite,with average grades of molybdenum,copper,sulfur,gallium,and rhenium being 0.081%,0.033%,1.67%,0.001%,and 0.0012%,respectively.The ore-forming fluids of the Daheishan deposit originated as the CO_(2)-H_(2)O-NaCl multiphase magmatic fluid system,rich in CO_(2)and bearing minor amounts of CH4,N2,and H2S,and later mixed with meteoric precipitation.In various mineralization stages,the ore-forming fluids had homogenization temperatures of>420℃‒400℃,360℃‒350℃,340℃‒230℃,220℃‒210℃,and 180℃‒160℃and salinities of>41.05%‒9.8%NaCleqv,38.16%‒4.48%NaCleqv,35.78%‒4.49%NaCleqv,7.43%NaCleqv,and 7.8%‒9.5%NaCleqv,respectively.The mineralization of the Daheishan deposit occurred at 186‒167 Ma.The granites closely related to the mineralization include granodiorites(granodiorite porphyries)and monzogranites(monzogranite porphyries),which were mineralized after magmatic evolution(189‒167 Ma).Moreover,these mineralization-related granites exhibit low initial strontium content and high initial neodymium content,indicating that these granites underwent crust-mantle mixing.The Daheishan deposit formed during the Early-Middle Jurassic,during which basaltic magma underplating induced the lower-crust melting,leading to the formation of magma chambers.After the fractional crystallization of magmas,ore-bearing fluids formed.As the temperature and pressure decreased,the ore-bearing fluids boiled drops while ascending,leading to massive unloading of metal elements.Consequently,brecciated and veinlet-disseminated ore bodies formed.

Geology and mineralization of the Duobaoshan supergiant porphyry Cu-Au-Mo-Ag deposit(2.36 Mt)in Heilongjiang Province,China:A review

The reserves of the Duobaoshan porphyry Cu-Au-Mo-Ag deposit(also referred to as the Duobaoshan porphyry Cu deposit)ranks first among the copper deposits in China and 33rd among the porphyry copper deposits in the world.It has proven resources of copper(Cu),molybdenum(Mo),gold(Au),and silver(Ag)of 2.28×10^(6)t,80×10^(3)t,73 t,and 1046 t,respectively.The major characteristics of the Duobaoshan porphyry Cu deposit are as follows.It is located in a zone sandwiched by the Siberian,North China,and paleo-Pacific plates in an island arc tectonic setting and was formed by the Paleozoic mineralization and the Mesozoic mineralization induced by superposition and transformation.The metallogenic porphyries are the Middle Hercynian granodiorite porphyries.The alterations of surrounding rocks are distributed in a ring form.With silicified porphyries at the center,the alteration zones of K-feldspar,biotite,sericite,and propylite occur from inside to outside.This deposit is composed of 215 ore bodies(including 14 major ore bodies)in four mineralized zones.Ore body No.X in the No.3 mineralized zone has the largest resource reserves,accounting for more than 78%of the total reserves of the deposit.Major ore components include Cu,Mo,Au,Ag,Se,and Ga,which have an average content of 0.46%,0.015%,0.16 g/t,1.22 g/t,0.0003%,and 0.001%-0.003%,respectively.The ore minerals of this deposit primarily include pyrite,chalcopyrite,bornite,and molybdenite,followed by magnetite,hematite,rutile,gelenite,and sphalerite.The ore-forming fluids of this deposit were magmatic water in the early metallogenic stage and then the mixture of meteoric water and magmatic water at the late metallogenic stage.The ore-forming fluids experienced three stages.The ore-forming fluids of stageⅠhad a hydrochemical type of H_(2)O-CO_(2)-Na Cl,an ore-forming temperature of 375-650℃,and ore-forming pressure of 110-160 MPa.The ore-forming fluids of stageⅡhad a hydrochemical type of H_(2)O-CO_(2)-Na Cl,an ore-forming temperature of 310-350℃,and ore-forming pressure of 58-80 MPa.The ore-forming fluids of stageⅢhad a hydrochemical type of Na Cl-H_(2)O,an ore-forming temperature of 210-290℃,and ore-forming pressure of 5-12 MPa.The CuAu-Mo-Ag mineralization mainly occurred at stagesⅠandⅡ,with the ore-forming materials having a mixed crust-mantle source.The Duobaoshan porphyry Cu deposit was formed in the initial subduction environment of the Paleo-Asian Ocean Plate during the Early Ordovician.Then,due to the closure of the Mongol-Okhotsk Ocean and the subduction and compression of the Paleo-Pacific Ocean,a composite orogenic metallogenic model of the deposit was formed.In other words,it is a porphyry-epithermal copper-gold polymetallic mineralization system of composite orogeny consisting of Paleozoic island arcs and Mesozoic orogeny and extension.

巴基斯坦新特提斯构造–岩浆演化与重要金属成矿作用

巴基斯坦在大地构造位置上处于印度、欧亚和阿拉伯三大板块的汇聚带,正同时发生着大陆碰撞和大洋俯冲作用,是研究地球系统深部圈层相互作用与成矿效应的绝佳天然实验室。但是,目前对于巴基斯坦构造演化与成矿作用的研究还不系统,对于巴基斯坦的大型–超大型矿床形成的背景和机制仍不清楚。笔者针对巴基斯坦不同类型的优势矿种开展了深入解剖和对比研究,系统梳理最新研究进展,围绕巴基斯坦新特提斯构造–岩浆演化与成矿作用响应的关键科学问题,分析铜矿、铬铁矿、铅锌矿以及碳酸岩有关的稀土矿床等重要金属成矿类型形成的构造环境以及与区域重大地质事件的耦合关系,总结巴基斯坦区域成矿规律,为资源潜力分析和境内外找矿勘查提供依据。

秘鲁Morococha斑岩-矽卡岩-浅成低温热液型矿床成矿地质特征与区域找矿方向

秘鲁中部Morococha地区位于中安第斯秘鲁中新世成矿带,是全球最具代表性的世界级斑岩-矽卡岩型和浅成低温热液型成矿系统之一。系统总结了该区斑岩型、矽卡岩型、浅成低温热液型等多种铜钼铅锌银多金属矿化成矿作用特征和最新的研究进展,结合区域岩浆-热液成矿作用过程,提出了下一步找矿方向。Morococha矿区位于秘鲁中部Yali穹隆北段,由中心部位的Toromocho斑岩型铜钼矿床及外围铅锌银金多金属矿脉组成。区内主要构造为北西向Morococha背斜,地层主要为二叠纪—三叠纪Mitu群火山碎屑岩、侏罗纪Pucara群碳酸盐岩、早白垩世Goyllarisquizga群海相碎屑岩和碳酸盐岩。矿区中新世岩浆活动主要为中中新世不含矿的闪长质侵入岩(14.3~14.1 Ma)和晚中新世与成矿有关的花岗闪长岩和长石斑岩岩株(9.4~7.7 Ma)。Morococha岩浆-热液系统(8.5~7.2 Ma)是其形成超大型斑岩型铜矿成矿的原因之一,铅锌银多金属矿化主要发生在斑岩型矿化之后约0.5 Ma,受区域构造控制。矿床在空间上显示出明显的金属分带特征,中心斑岩区域为富铜矿石,而远离斑岩区出现更多的富铅锌银矿石。秘鲁中部中新世成矿带分布着众多具有重要经济价值的脉状热液型铅锌银多金属矿床,总结近年来综合地质调查和研究成果,表明这些多金属矿床都属于斑岩-矽卡岩成矿系统的一部分,因此斑岩-矽卡岩型铜矿床及浅成低温热液型贵金属矿床是秘鲁中部重要的找矿方向。

西藏多龙斑岩-浅成低温热液型铜(金)矿集区地质特征及找矿潜力分析

本文在总结多龙矿集区地质特征的基础上,开展了矿山深边部的潜力分析,以期为下一步的找矿预测提供勘查思路。多龙斑岩-浅成低温热液型铜(金)矿集区位于西藏班公湖-怒江成矿带的北西侧,主要由铁格隆南超大型斑岩-浅成低温热液型铜(金)矿床,拿若大型斑岩-隐爆角砾岩筒型铜(金)矿床,多不杂、波龙、多不杂西大型斑岩型铜(金)矿床,尕尔勤、地堡那木岗高硫化浅成低温热液型铜(金)矿点组成,共探获铜资源量超过1500万t,伴生金超250 t,伴生银3900 t。多龙矿集区形成于早白垩世(120 Ma)班公湖-怒江洋盆北向俯冲的陆缘弧环境,物质源区为壳幔混合源,成矿岩浆岩主要为中酸性的闪长玢岩-花岗闪长斑岩-花岗斑岩系列,具有弧岩浆特征。俯冲板片的折返是多龙矿集区深部岩浆形成和侵位的主要动力学机制,成矿后安山质火山岩(110 Ma)的覆盖对矿床起到重要的保存作用。多不杂矿区F2逆断层将矿体分割成上、下两部分,下部分矿体是找矿的重点方向。铁格隆南矿区深钻揭露了由南向北的逆冲断层,该逆冲断层将矿体错断并推覆到“红层”沉积之上,其下盘是寻找另一半隐伏矿体的方向。尕尔勤矿区大面积发育指示浅成低温热液成矿系统的“硅帽”,明显富集Au、Ag、As、Sb、Bi、Cu等元素,Au、As、Sb、Hg等呈现较好的元素组合异常,具有寻找浅成低温热液型矿床的潜力。地堡那木岗矿区发育高硫化浅成低温热液型蚀变(高岭石化、地开石化、明矾石化等)和矿物组合(铜蓝、蓝辉铜矿、斑铜矿等),且物探、化探、遥感异常套合良好,是未来矿产勘查的重点。区内逆冲断层对矿床的改造作用是未来研究的重点,对进一步的勘查评价具有重要的指导意义。

黑龙江多宝山铜矿区韧性剪切变形时代及其对铜矿化改造的约束

黑龙江多宝山斑岩铜矿主要赋存于奥陶纪花岗闪长岩中,少量发育于奥陶纪花岗闪长斑岩及奥陶系多宝山组安山岩中,铜矿化以浸染状、细脉-浸染状为主。成矿过程经历了斑岩期、剪切变形期。矿区发育韧性剪切变形带,多宝山组、花岗闪长岩、花岗闪长斑岩、安山质凝灰角砾岩及矿体均发生了剪切变形作用,沿剪切面发育绢云母新生矿物。绢云母的坪年龄和正反等时线年龄分别为280.1±1.2 Ma和281.4±1.3 Ma、281.3±1.3 Ma,在误差范围内基本一致,限定矿区韧性剪切变形的时间为早二叠世(约280 Ma)。多宝山斑岩铜矿床主要成矿作用形成于斑岩期,成矿时代为早奥陶世(约475 Ma),早二叠世的韧性剪切变形作用对原生斑岩铜矿化进行了改造,使矿石的铜进一步富集,品位相对增高。

赣南铁山垅钨矿田花岗斑岩地球化学特征、锆石U-Pb年龄及Hf同位素特征

赣南铁山垅钨矿田位于南岭钨锡多金属成矿带东段,已探获黑钨矿资源量超10万吨。铁山垅复式岩体包括主体似斑状黑云母花岗岩和补体细粒二云母花岗岩两部分,花岗斑岩呈脉状分布。矿田内花岗岩具有相似的地球化学特征,都属过铝质高钾钙碱性花岗岩类,表现出高硅、富铝、富碱、高钾、富成矿元素(W、Sn、Cu、Mo)和亏损Ba、Sr、Ti、P、REE、Eu,稀土配分曲线呈典型的“海鸥式”分布和M型四分组效应等特征。利用LA-ICP-MS锆石U-Pb定年方法获得花岗斑岩^(206)Pb/^(238)U年龄为146.7±0.5 Ma(MSDW=0.5),成岩时代属晚侏罗世。锆石的n(^(176)Lu)/n(^(177)Hf)=0.000973~0.001989,f_(Lu/Hf)=-0.97~-0.94,ε_(Hf)(t)=-17.9~-10.3,二阶段模式年龄(TDM2)为1.86~2.33 Ga,显示原岩为古元古代地壳。综合分析认为,铁山垅矿田岩浆活动可划分为170~155 Ma、155~150 Ma、150~145 Ma三个阶段,钨锡矿成矿主要集中在第二阶段,且第三阶段花岗斑岩与铜多金属矿成矿关系密切,推测铜岭矿区深部具有较大的找矿前景。

河北省涿鹿县杏园矿区矿床成因及找矿标志

本研究通过系统的地质、地球化学及地球物理分析,深入探讨了河北省涿鹿县杏园矿区的成矿背景、矿床特征及其找矿指标。利用先进的地质勘查技术,首次明确揭示了矿区内斑岩型与热液脉型矿床的共生关系及其空间分布规律,提出了新的成矿模型和勘查方向。研究结果不仅深化了对杏园矿区成矿规律的理解,而且对指导未来的地质勘查工作,推动矿产资源的合理开发与利用具有重要意义。

斑岩-矽卡岩型钼矿成矿控制因素

本文从成钼矿岩浆的化学组分和物理化学性质,以及成钼矿流体的出溶和金属堆积过程两个层次,探讨了斑岩-矽卡岩型钼矿的成矿控制因素。研究揭示,不同构造环境中的斑岩-矽卡岩型钼矿的成矿岩浆均不富集钼,氧化性富水岩浆是形成斑岩-矽卡岩型钼矿的基础,成矿流体沿岩浆房顶部衍生的小岩株高度聚集是成钼矿之关键环节。研究还揭示,大型-超大型斑岩-矽卡岩型钼矿均具有多期岩浆-热液活动叠加成矿的特点,成矿岩体与大岩浆房相连,并且成矿岩浆能多期侵位与成矿,是形成大型-超大型钼矿的关键因素。综合来看,斑岩-矽卡岩型钼矿是岩浆体量、岩浆氧逸度和水含量、流体聚集程度以及多期岩浆-热液活动叠加成矿多因素耦合的产物。岩浆体量、岩浆氧逸度和岩浆水含量是基础,流体聚集程度是关键,要形成大型-超大型斑岩-矽卡岩型钼矿,还需要多期岩浆-热液活动的叠加成矿。研究提出,寻找斑岩-矽卡岩型钼矿,在关注岩体地球化学属性的同时,还应关注岩体的空间结构属性以及多期岩浆-热液活动叠加成矿特征的识别。

桂东北苗儿山地区上小地加里东期花岗斑岩成因及其与铀成矿关系

华南印支期花岗岩中广泛发育热液铀矿床,然而加里东期花岗岩体中的铀矿化却鲜有报道。近年来,在桂东北苗儿山地区上小地加里东期花岗岩体中已识别出多个铀矿体,它们在空间上与花岗斑岩脉存在密切联系。为了探究该花岗斑岩脉成因及其与铀成矿关系,本文对其开展了详细的野外地质调查、岩相学、锆石U-Pb年代学及地球化学研究。花岗斑岩呈岩脉形式侵入苗儿山加里东期花岗岩基之中,两者关系截然。LA-ICP-MS锆石U-Pb定年获得花岗斑岩的年龄为422~426 Ma,与加里东期花岗岩体形成时限(~421 Ma)基本一致,属于加里东期岩浆活动晚期产物。该岩石高硅(SiO_(2)=70.85%~71.74%)、高钾(K_(2)O=4.71%~5.55%),属于过铝质‒强过铝质(A/CNK=1.00~1.15),微量元素相对富集U、Th、Rb等大离子亲石元素、亏损Nb、Ta、Zr、Hf等高场强元素,稀土元素总量(ΣREE=239×10^(−6)~288×10^(−6))低,具有明显的Eu负异常(δEu=0.22~0.28),与区域加里东期花岗岩的地化特征一致。综合分析,认为上小地花岗斑岩为一套S型花岗岩,形成于后碰撞构造背景下,由中、上地壳古元古代变质砂岩、泥质岩部分熔融产生的长英质岩浆经历一定程度的结晶分异形成。该花岗斑岩与区内的铀矿存在巨大的形成时差,仅为铀矿质的沉淀提供了有利构造条件。

安徽庐枞矿集区沙溪斑岩型铜金矿床中硒、碲的赋存状态及富集规律研究

硒和碲是重要的战略性关键金属,在现代工业和国防建设中有着广泛的应用。硒和碲通常很难形成独立矿床,目前全球大部分硒和碲来自斑岩型铜金矿床。长江中下游成矿带是我国东部重要的斑岩-矽卡岩型铜金矿床成矿带之一,前人虽然对成矿带内矽卡岩型矿床中伴生关键金属已开展了相关研究,但对成矿带内斑岩矿床中关键金属的赋存状态、分布和富集规律尚关注较少。本次工作以成矿带内沙溪斑岩型铜金矿床为研究对象,系统采集了矿床不同深度、不同类型的岩矿石样品,通过扫描电子显微镜、全岩化学分析、TIMA及矿物原位LA-ICP-MS微量成分测试等分析技术方法对矿床中硒和碲等关键金属开展了系统的研究。结果表明,沙溪矿床中硒和碲元素发生显著富集,与主成矿元素铜具有明显的正相关关系。估算矿床中伴生硒资源量约为1196t、碲资源量约为96.6t,其中硒达到大型规模,具有潜在利用价值。与成矿带内其他典型矽卡岩矿床(包括斑岩-矽卡岩矿床)相比,沙溪斑岩型矿床中硒和碲的含量明显偏低,这可能是深部成矿岩浆演化过程的差异导致的。矿床中有91.64%的硒、87.48%的碲是以独立矿物形式存在。沙溪矿床硒、碲与主成矿元素铜和金的富集规律一致,流体混合过程中氧逸度的变化可能是硒和碲的主要的沉淀机制。