Gigahertz frequency hopping in an optical phase-locked loop for Raman lasers

Raman lasers are essential in atomic physics,and the development of portable devices has posed requirements for time-division multiplexing of Raman lasers.We demonstrate an innovative gigahertz frequency hopping approach of a slave Raman laser within an optical phase-locked loop(OPLL),which finds practical application in an atomic gravimeter,where the OPLL frequently switches between near-resonance lasers and significantly detuned Raman lasers.The method merges the advantages of rapid and extensive frequency hopping with the OPLL’s inherent low phase noise,and exhibits a versatile range of applications in compact laser systems,promising advancements in portable instruments.

11.6-GHz 0.18-μm monolithic CMOS phase-locked loop

A design of a ll. 6-GHz phase-locked loop （PLL） fabricated in 49-GHz 0. 18-μm CMOS （complementary metal-oxide-semiconductor transistor） technology is described. An analog multiplier phase detector （PD）, a one-pole passive low pass filter and a three-stage ring oscillator with variable negativeresistance loads build up the monolithic phase-locked loop. The measured rms jitter of output signal via onwafer testing is 2. 2 ps under the stimulation of 2^31 - 1 bit-long pseudo random bit sequence （PRBS） at the bit rate of 11.6 GHz. And the tracking range is 250 MHz. The phase noise in the locked condition is measured to be - 107 dBc/Hz at 10 MHz offset, and that of the ring VCO at the central frequency is -99 dBc/Hz at 10 MHz offset. The circuit area of the proposed PLL is only 0. 47mm×0.72mm and the direct current （DC） power dissipation is 164 mW under a 1.8-V supply.

A frequency servo SoC with output power stabilization loop technology for miniaturized atomic clocks

A frequency servo system-on-chip(FS-SoC)featuring output power stabilization technology is introduced in this study for high-precision and miniaturized cesium(Cs)atomic clocks.The proposed power stabilization loop(PSL)technique,incorporating an off-chip power detector(PD),ensures that the output power of the FS-SoC remains stable,mitigating the impact of power fluctuations on the atomic clock's stability.Additionally,a one-pulse-per-second(1PPS)is employed to syn-chronize the clock with GPS.Fabricated using 65 nm CMOS technology,the measured phase noise of the FS-SoC stands at-69.5 dBc/Hz@100 Hz offset and-83.9 dBc/Hz@1 kHz offset,accompanied by a power dissipation of 19.7 mW.The Cs atomic clock employing the proposed FS-SoC and PSL obtains an Allan deviation of 1.7×10^(-11) with 1-s averaging time.

CMOS analog and mixed-signal phase-locked loops: An overview

CMOS analog and mixed-signal phase-locked loops(PLL)are widely used in varies of the system-on-chips(SoC)as the clock generator or frequency synthesizer.This paper presents an overview of the AMS-PLL,including:1)a brief introduction of the basics of the charge-pump based PLL,which is the most widely used AMS-PLL architecture due to its simplicity and robustness;2)a summary of the design issues of the basic CPPLL architecture;3)a systematic introduction of the techniques for the performance enhancement of the CPPLL;4)a brief overview of ultra-low-jitter AMS-PLL architectures which can achieve lower jitter(<100 fs)with lower power consumption compared with the CPPLL,including the injection-locked PLL(ILPLL),subsampling(SSPLL)and sampling PLL(SPLL);5)a discussion about the consideration of the AMS-PLL architecture selection,which could help designers meet their performance requirements.

An improved arctangent algorithm based on phase-locked loop for heterodyne detection system

We present an ameliorated arctangent algorithm based on phase-locked loop for digital Doppler signal processing,utilized within the heterodyne detection system. We define the error gain factor given by the approximation of Taylor expansion by means of a comparison of the measured values and true values. Exact expressions are derived for the amplitude error of two in-phase & quadrature signals and the frequency error of the acousto-optic modulator. Numerical simulation results and experimental results make it clear that the dynamic instability of the intermediate frequency signals leads to cumulative errors, which will spiral upward. An improved arctangent algorithm for the heterodyne detection is proposed to eliminate the cumulative errors and harmonic components. Depending on the narrow-band filter, our experiments were performed to realize the detectable displacement of 20 nm at a detection distance of 20 m. The aim of this paper is the demonstration of the optimized arctangent algorithm as a powerful approach to the demodulation algorithm, which will advance the signal-to-noise ratio and measurement accuracy of the heterodyne detection system.

Design of radiation hard phase-locked loop at 2.5 GHz using SOS-CMOS

A radiation hard phase-locked loop （PLL） is designed at 2.5 GHz using silicon on sapphire complementary metal-oxide-semiconductor process. Radiation hardness is achieved through improving circuit design without sacrificing real estate. Stability is guaranteed by a fully self-bias architecture. The lock time of PLL is minimized by maximizing the loop bandwidth. Frequency tuning range of voltage controlled oscillator is significantly enhanced by a novel load configuration. In addition, multiple bias stages, asynchronous frequency divider, and silicon on sapphire process jointly make the proposed PLL more radiation hard. Layout of this PLL is simulated by Cadence Spectre RF under both single event effect and total induced dose effect. Simulation results demonstrate excellent stability, lock time 〈 600 ns, frequency tuning range [1.57 GHz, 3.46 GHz], and jitter 〈 12 ps. Through comparison with PLLs in literatures, the PLL is especially superior in terms of lock time and frequency tuning range performances.

A 5.12-GHz LC-based phase-locked loop for silicon pixel readouts of high-energy physics

There is an urgent need for high-quality and high-frequency clock generators for high-energy physics experiments.The transmission data rate exceeds 10 Gbps for a single channel in future readout electronics of silicon pixel detectors.Others,such as time measurement detectors,require a high time resolution based on the time-to-digital readout architecture.A phase-locked loop(PLL)is an essential and broadly used circuit in these applications.This study presents an application-specific integrated circuit of a low-jitter,low-power LC-tank that is PLL fabricated using 55-nm CMOS technology.It includes a 3rd-order frequency synthesis loop with a programmable bandwidth,a divide-by-2 pre-scaler,standard low-voltage differential signaling interfaces,and a current mode logic(CML)driver for clock transmissions.All the d-flip-flop dividers and phase-frequency detectors are protected from single-event upsets using the triple modular redundancy technique.The proposed VCO uses low-pass filters to suppress the noise from bias circuits.The tested LC-PLL covers a frequency locking range between 4.74 GHz and 5.92 GHz with two sub-bands.The jitter measurements of the frequency-halved clock(2.56 GHz)are less than 460 fs and 0.8 ps for the random and deterministic jitters,respectively,and a total of 7.5 ps peak-to-peak with a bit error rate of 10^(-12).The random and total jitter values for frequencies of 426 MHz and 20 MHz are less than 1.8 ps and 65 ps,respectively.The LC-PLL consumed 27 mW for the core and 73.8 mW in total.The measured results nearly coincided with the simulations and validated the analyses and tests.

A LOW POWER TIME-TO-DIGITAL CONVERTER FOR ALL-DIGITAL PHASE-LOCKED LOOP

Time-to-Digital Converter (TDC) is a key block used as the phase/frequency detector in an All-Digital Phase-Locked Loop (ADPLL). Usually, it occupies a large proportion of ADPLL's total power consumption up to about 30% to 40%. In this paper, the detailed power consumption of different components in the TDC is analyzed. A Power Management Block (PMB) is presented for the TDC to reduce its power consumption. A 24-bits TDC core with the proposed PMB is implemented in HJTC 0.18 μm CMOS technology. Simulation results show that up to 84% power reduction is achieved using our proposed technique.

Phase-Locked Loop Based Cancellation of ECG Power Line Interference

Power line(PL)interference is one significant artifact in electrocardiography(ECG)that needs to be reduced to ensure accurate recording of cardiac signals.Because PL interference is non-stationary and has varying frequency,phase,and amplitude in ECG measurement,adaptive techniques are often necessary to track and cancel the interference.In this paper we present a phase-locked loop(PLL)-based adaptive filter to cancel PL interference.The PLL obtains the reference signal that is fed into the adaptive filter to remove the PL interference at the central frequency of 50 Hz.It is found that the technique can effectively cancel PL interference in real ECG signals and,when compared with some existing techniques such as least mean squares(LMS)adaptive filter,the new technique produces better results in terms of signal-to-interference ratio(SIR).

Hybrid phase-locked loop with fast locking time and low spur in a 0.18-μm CMOS process

We propose a novel hybrid phase-locked loop （PLL） architecture for overcoming the trade-off between fast locking time and low spur. To reduce the settling time and meanwhile suppress the reference spurs, we employ a wide-band single-path PLL and a narrow-band dual-path PLL in a transient state and a steady state, respectively, by changing the loop bandwidth according to the gain of voltage controlled oscillator （VCO） and the resister of the loop filter. The hybrid PLL is implemented in a 0.18-μm complementary metal oxide semiconductor （CMOS） process with a total die area of 1.4×0.46 mm2. The measured results exhibit a reference spur level of lower than -73 dB with a reference frequency of 10 MHz and a settling time of 20 μs with 40 MHz frequency jump at 2 GHz. The total power consumption of the hybrid PLL is less than 27 mW with a supply voltage of 1.8 V.

Multi-Order Intermittent Chaotic Synchronization of Closed Phase Locked Loop

For the model of a Closed Phase Locked Loop (CPLL) communication System consists of both the transmission and receiver ends. This model is considered to be in a multi-order intermittent chaotic state. The chaotic signals are then synchronized along side with our system. This chaotic synchronization will be demonstrated and furthermore, a modulation will be formed to examine the system if it will perfectly reconstruct or not. Finally we will demonstrate the synchronization conditions of the system.

Comparative Study of Low-Pass Filter and Phase-Locked Loop Type Speed Filters for Sensorless Control of AC Drives

High quality speed information is one of the key issues in machine sensorless drives,which often requires proper filtering of the estimated speed.This paper comparatively studies typical low-pass filters(LPF)and phase-locked loop(PLL)type filters with respect to ramp speed reference tracking and steady-state performances,as well as the achievement of adaptive cutoff frequency control.An improved LPF-based filter structure with no ramping and steady-state errors caused by filter parameter quantization effects is proposed,which is suitable for applying LPF for sensorless drives of AC machines,especially when fixed-point digital signal processor is selected e.g.in mass production.Furthermore,the potential of adopting PLL for speed filtering is explored.It is demonstrated that PLL type filters can well maintain the advantages offered by the improved LPF.Moreover,it is found that the PLL type filters exhibit almost linear relationship between the cutoff frequency of the PLL filter and its proportional-integral(PI)gains,which can ease the realization of speed filters with adaptive cutoff frequency for improving the speed transient performance.The proposed filters are verified experimentally.The PLL type filter with adaptive cutoff frequency can provide satisfactory performances under various operating conditions and is therefore recommended.

Dynamic Free-Spectral-Range Measurement for Fiber Resonator Based on Digital-Heterodyne Optical Phase-Locked Loop

We propose a novel scheme, based on digital-heterodyne optical phase-locked loop with whole-fiber circuit, to dynamically measure the free-spectral-range of a fiber resonator. The optical phase-locked loop is established with a differential frequency-modulation module consists of a pair of acousto-optic modulators. The resonance-tracking loop is derived with the Pound-Drever-Hall technique for locking the heterodyne frequency of the OPLL on the frequency difference between adjacent resonance modes. A stable locking accuracy of about 7 × 10?9 and a dynamic locking accuracy of about 5 × 10?8 are achieved with the FSR of 8.155 MHz, indicating a bias stability of the resonator fiber optic gyro of about 0.1?/h with 10 Hz bandwidth. In addition, the thermal drift coefficient of the FSR is measured as 0.1 Hz/?C. This shows remarkable potential for realizing advanced optical measurement systems, such as the resonant fiber optic gyro, and so on.

Research on Carrier Synchronization of QPSK Based on Simulink

As an important part of the communication system, synchronization technology is a communication system to run the correct protection, has been a hot topic in communication systems research. Four-phase phase shift keying (QPSK) circuit structure is relatively simple, and has a good band utilization, in the modern communication has a wide range of applications. Corresponding research on carrier synchronization for QPSK coherent demodulation is carried out. By comparing several carrier recovery loops, The quaternary loose tail loop is selected as carrier recovery loop. First of all, the core part of the digital phase-locked loop analysis and implementation, and finally through the tool Simulink to complete the realization of the system.

High dynamic synchronization algorithm based on cyclic spectral density

A new high dynamic synchronization algorithm using cyclic spectral density was presented according to the theories of cyclic spectral density and its anti-interface and anti-noise properties.The closed forms of frequency error and phase error were obtained,and their performances were analyzed.The in-phase signal throw costas loop was normalized to obtain a cosine signal.Cyclic spectral density of the cosine signal of was computed to obtain the frequency error and the phase error and then results were put into NCO to synchronize.Finally,the performance of the presented algorithms was compared with the conventional algorithms by virtue of simulations,and the simulation results proved the correctness and the superiority of the new algorithms.

A sapphire fibre thermal probe based on fast Fourier transform and phase-lock loop

A sapphire fibre thermal probe with Cr^3＋ ion-doped end is developed by using the laser heated pedestal growth method. The fluorescence thermal probe offers advantages of compact structure, high performance and ability to withstand high temperature in a detection range from room temperature to 450℃. Based on the fast Fourier transform （FFT）, the fluorescence lifetime is obtained from the tangent function of phase angle of the non-zeroth terms in the FFT result. This method has advantages such as quick calculation, high accuracy and immunity to the background noise. This FFT method is compared with other traditional fitting methods, indicating that the standard deviation of the FFT method is about half of that of the Prony method and about 1/6 of that of the log-fit method. And the FFT method is immune to the background noise involved in a signal. So, the FFT method is an excellent way of processing signals. In addition, a phase-lock amplifier can effectively suppress the noise.

Novel Joint Chip Sampling and Phase Synchronization Algorithm for Multistandard UMTS Systems

CDMA Timing and phase offsets tracking remain as one of considerable factors that influence the performances of communication systems. Many algorithms are proposed to solve this problem. In general, these solutions process separately the chip sampling offset and phase rotation. In addition, most of proposed solutions can not assure a compromise between robustness criteria and low complexity for implementation in real time applications. In this paper we present an efficient algorithm for chip sampling and phase synchronization. This algorithm allows estimating and correcting jointly in real time, sampling instant and phase errors. The robustness and the low complexity of this algorithm are evaluated, firstly by simulation and then tested by real experimentation for UMTS standard. Simulation results show that the proposed algorithm provides very efficient compensation for sampling clock offset and phase rotation. A real time implementation is achieved, based on TigerSharc DSP, while using a complete UMTS transmission-reception chain. Experimental results show robustness in real conditions.

CHAOS AND BIFURCATION OF PHASE-LOCKING LOOPS UNDER PERIODIC PERTURBATION

This paper discusses the chaos and bifurcation for equation x+cosxx+asinx =ebsint. By use of the Melnikov method the conditions to have the chaotic behavior and to have subharmonic oscillations are given.

跟网型变换器的小扰动同步稳定机理分析与致稳控制

弱电网下,跟网型变换器易出现因阻尼不足导致的小扰动同步失稳问题。为此,该文借鉴复转矩分析理论,计及复杂控制耦合,建立跟网型变换器的复转矩模型。量化多环控制耦合、线路阻抗、控制参数等因素对系统阻尼转矩的影响,从阻尼的角度揭示跟网型变换器的小扰动同步失稳机理。根据理论分析,提出一种基于相位补偿的锁相环阻尼重塑控制策略,通过补偿多环控制耦合引入的负阻尼,增强变换器的小扰动同步稳定性。最后,开展相应的仿真与实验,验证理论分析的正确性与改进控制策略的有效性。

基于改进正交锁相环的永磁同步电机无位置传感器控制

针对传统正交锁相环(QPLL)应用于永磁同步电机无位置传感器控制中存在的反转失效与加、减速工况下出现显著的转子位置直流偏移误差问题,该文提出一种改进的正交锁相环(IQPLL)。其通过重构鉴相器环节,使得鉴相器的输出与永磁同步电机的转向不再相关,从而解决传统QPLL在电机反转时估算转子位置出现180°偏差的问题。此外,在新型鉴相器结构下,设计前馈环路以补偿加、减速工况下的位置直流偏移误差。并建立了IQPLL的小信号模型,根据系统的频率响应特性给出了IQPLL的参数设计方法。实验结果表明,相对于传统的QPLL,所提出的IQPLL可实现永磁同步电机无位置传感器控制正、反转稳定运行,并有效抑制了加、减速工况下的转子位置直流偏移误差。