One sequence tagged site marker Subl-1 and twice submergence stress method were used in selection of submergence tolerant homozygous line from Sub-lBS, a submergence tolerant, bentazon sensitive and photoperiod-sensit...One sequence tagged site marker Subl-1 and twice submergence stress method were used in selection of submergence tolerant homozygous line from Sub-lBS, a submergence tolerant, bentazon sensitive and photoperiod-sensitive and/or thermo-sensitive genic male sterile line that developed by our laboratory. The results revealed that the original Sub-lBS was heterozygous in SublA-1 locus even though it was identical in almost all of agronomical traits and the segregation of SublA-1 was in accordance with Mendelian law based on chi-square test. And then the original Sub-IBS was divided into two groups： one was ofSublA-1 introgression and the other was not; and the two groups were tested by twice submergence stress method. After the first submergence stress that lasted for 12 d, the average plant heights were significant difference at the 1% level between the two groups. After recovery for 10 d, the second submergence stress sustained for 18 d was carried on; and the group with SublA-1 gene was found apparently tolerant than the other group in submergence tolerance.展开更多
This work presents the results of the exact computation of (180)<sup>3</sup> = 5,832,000 third-order mixed sensitivities of the leakage response of a polyethylene-reflected plutonium (PERP) experimental be...This work presents the results of the exact computation of (180)<sup>3</sup> = 5,832,000 third-order mixed sensitivities of the leakage response of a polyethylene-reflected plutonium (PERP) experimental benchmark with respect to the benchmark’s 180 microscopic total cross sections. This computation was made possible by applying the Third-Order Adjoint Sensitivity Analysis Methodology developed by Cacuci. The numerical results obtained in this work revealed that many of the 3<sup>rd</sup>-order sensitivities are significantly larger than their corresponding 1<sup>st</sup>- and 2<sup>nd</sup>-order ones, which is contrary to the widely held belief that higher-order sensitivities are all much smaller and hence less important than the first-order ones, for reactor physics systems. In particular, the largest 3<sup>rd</sup>-order relative sensitivity is the mixed sensitivity <img src="Edit_754b8437-dfdf-487d-af68-c78c637e6d4e.png" width="180" height="24" alt="" />of the PERP leakage response with respect to the lowest energy-group (30) total cross sections of <sup>1</sup>H (“isotope 6”) and <sup>239</sup>Pu (“isotope 1”). These two isotopes are shown in this work to be the two most important parameters affecting the PERP benchmark’s leakage response. By comparison, the largest 1<sup>st</sup>-order sensitivity is that of the PERP leakage response with respect to the lowest energy-group total cross section of isotope <sup>1</sup>H, having the value <img src="Edit_a5cfcc11-6a99-41ee-b844-a5ee84b454b3.png" width="100" height="24" alt="" />, while the largest 2<sup>nd</sup>-order sensitivity is <img src="Edit_05166a2b-97f7-43f1-98ff-b21368c00228.png" width="120" height="22" alt="" />. The 3<sup>rd</sup>-order sensitivity analysis presented in this work is the first ever such analysis in the field of reactor physics. The consequences of the results presented in this work on the uncertainty analysis of the PERP benchmark’s leakage response will be presented in a subsequent work.展开更多
This work extends to third-order previously published work on developing the adjoint sensitivity and uncertainty analysis of the numerical model of a <u>p</u>oly<u>e</u>thylene-<u>r</u...This work extends to third-order previously published work on developing the adjoint sensitivity and uncertainty analysis of the numerical model of a <u>p</u>oly<u>e</u>thylene-<u>r</u>eflected <u>p</u>lutonium (acronym: PERP) OECD/NEA reactor physics benchmark. The PERP benchmark comprises 21,976 imprecisely known (uncertain) model parameters. Previous works have used the adjoint sensitivity analysis methodology to compute exactly and efficiently all of the 21,976 first-order and (21,976)<sup>2</sup> second-order sensitivities of the PERP benchmark’s leakage response to all of the benchmark’s uncertain parameters, showing that the largest and most consequential 1<sup>st</sup>- and 2<sup>nd</sup>-order response sensitivities are with respect to the total microscopic cross sections. These results have motivated extending the previous adjoint-based derivations to third-order, leading to the derivation, in this work, of the exact mathematical expressions of the (180)<sup>3</sup> third-order sensitivities of the PERP leakage response with respect to these total microscopic cross sections. The formulas derived in this work are valid not only for the PERP benchmark but can also be used for computing the 3<sup>rd</sup>-order sensitivities of the leakage response of any nuclear system involving fissionable material and internal or external neutron sources. Subsequent works will use the adjoint-based mathematical expressions obtained in this work to compute exactly and efficiently the numerical values of these (180)<sup>3</sup> third-order sensitivities (which turned out to be very large and consequential) and use them for a third-order uncertainty analysis of the PERP benchmark’s leakage response.展开更多
This work illustrates the application of the 1<sup>st</sup>-CASAM to a paradigm heat transport model which admits exact closed-form solutions. The closed-form expressions obtained in this work for the sens...This work illustrates the application of the 1<sup>st</sup>-CASAM to a paradigm heat transport model which admits exact closed-form solutions. The closed-form expressions obtained in this work for the sensitivities of the temperature distributions within the model to the model’s parameters, internal interfaces and external boundaries can be used to benchmark commercial and production software packages for simulating heat transport. The 1<sup>st</sup>-CASAM highlights the novel finding that response sensitivities to the imprecisely known domain boundaries and interfaces can arise both from the definition of the system’s response as well as from the equations, interfaces and boundary conditions that characterize the model and its imprecisely known domain. By enabling, in premiere, the exact computations of sensitivities to interface and boundary parameters and conditions, the 1<sup>st</sup>-CASAM enables the quantification of the effects of manufacturing tolerances on the responses of physical and engineering systems.展开更多
为提高凝固型酸奶的品质及安全性,将1%、1.5%、2%、2.5%、3%、4%、5%乳清蛋白粉(Whey protein powder,WPP)加入全脂乳粉中生产酸奶,以不添加WPP的凝固型酸奶为对照组,测定酸奶酸度、持水力(WHC)、脱水收缩敏感性(STS)、质构特性、流变...为提高凝固型酸奶的品质及安全性,将1%、1.5%、2%、2.5%、3%、4%、5%乳清蛋白粉(Whey protein powder,WPP)加入全脂乳粉中生产酸奶,以不添加WPP的凝固型酸奶为对照组,测定酸奶酸度、持水力(WHC)、脱水收缩敏感性(STS)、质构特性、流变学特性和微观结构变化,并进行感官评定,研究不同添加量乳清蛋白粉对凝固型酸奶品质特性的影响,以确定WPP最适添加量。结果表明:随着乳清蛋白粉添加量的增加,酸奶的滴定酸度、持水力、乳酸菌总数、硬度、胶着性、粘弹性、凝胶性逐渐增加,脱水收缩敏感性(STS)逐渐减小;当WPP添加量为2%时,酸奶的持水力、粘弹性都明显提升,STS明显降低,且具有较好的口感、更连续的网络结构,与对照组相比综合品质得到明显提高。展开更多
基金supported by the Knowledge Innovation Program of the Chinese Academy of Sciences(KSCX2-EW-N-01)
文摘One sequence tagged site marker Subl-1 and twice submergence stress method were used in selection of submergence tolerant homozygous line from Sub-lBS, a submergence tolerant, bentazon sensitive and photoperiod-sensitive and/or thermo-sensitive genic male sterile line that developed by our laboratory. The results revealed that the original Sub-lBS was heterozygous in SublA-1 locus even though it was identical in almost all of agronomical traits and the segregation of SublA-1 was in accordance with Mendelian law based on chi-square test. And then the original Sub-IBS was divided into two groups： one was ofSublA-1 introgression and the other was not; and the two groups were tested by twice submergence stress method. After the first submergence stress that lasted for 12 d, the average plant heights were significant difference at the 1% level between the two groups. After recovery for 10 d, the second submergence stress sustained for 18 d was carried on; and the group with SublA-1 gene was found apparently tolerant than the other group in submergence tolerance.
文摘This work presents the results of the exact computation of (180)<sup>3</sup> = 5,832,000 third-order mixed sensitivities of the leakage response of a polyethylene-reflected plutonium (PERP) experimental benchmark with respect to the benchmark’s 180 microscopic total cross sections. This computation was made possible by applying the Third-Order Adjoint Sensitivity Analysis Methodology developed by Cacuci. The numerical results obtained in this work revealed that many of the 3<sup>rd</sup>-order sensitivities are significantly larger than their corresponding 1<sup>st</sup>- and 2<sup>nd</sup>-order ones, which is contrary to the widely held belief that higher-order sensitivities are all much smaller and hence less important than the first-order ones, for reactor physics systems. In particular, the largest 3<sup>rd</sup>-order relative sensitivity is the mixed sensitivity <img src="Edit_754b8437-dfdf-487d-af68-c78c637e6d4e.png" width="180" height="24" alt="" />of the PERP leakage response with respect to the lowest energy-group (30) total cross sections of <sup>1</sup>H (“isotope 6”) and <sup>239</sup>Pu (“isotope 1”). These two isotopes are shown in this work to be the two most important parameters affecting the PERP benchmark’s leakage response. By comparison, the largest 1<sup>st</sup>-order sensitivity is that of the PERP leakage response with respect to the lowest energy-group total cross section of isotope <sup>1</sup>H, having the value <img src="Edit_a5cfcc11-6a99-41ee-b844-a5ee84b454b3.png" width="100" height="24" alt="" />, while the largest 2<sup>nd</sup>-order sensitivity is <img src="Edit_05166a2b-97f7-43f1-98ff-b21368c00228.png" width="120" height="22" alt="" />. The 3<sup>rd</sup>-order sensitivity analysis presented in this work is the first ever such analysis in the field of reactor physics. The consequences of the results presented in this work on the uncertainty analysis of the PERP benchmark’s leakage response will be presented in a subsequent work.
文摘This work extends to third-order previously published work on developing the adjoint sensitivity and uncertainty analysis of the numerical model of a <u>p</u>oly<u>e</u>thylene-<u>r</u>eflected <u>p</u>lutonium (acronym: PERP) OECD/NEA reactor physics benchmark. The PERP benchmark comprises 21,976 imprecisely known (uncertain) model parameters. Previous works have used the adjoint sensitivity analysis methodology to compute exactly and efficiently all of the 21,976 first-order and (21,976)<sup>2</sup> second-order sensitivities of the PERP benchmark’s leakage response to all of the benchmark’s uncertain parameters, showing that the largest and most consequential 1<sup>st</sup>- and 2<sup>nd</sup>-order response sensitivities are with respect to the total microscopic cross sections. These results have motivated extending the previous adjoint-based derivations to third-order, leading to the derivation, in this work, of the exact mathematical expressions of the (180)<sup>3</sup> third-order sensitivities of the PERP leakage response with respect to these total microscopic cross sections. The formulas derived in this work are valid not only for the PERP benchmark but can also be used for computing the 3<sup>rd</sup>-order sensitivities of the leakage response of any nuclear system involving fissionable material and internal or external neutron sources. Subsequent works will use the adjoint-based mathematical expressions obtained in this work to compute exactly and efficiently the numerical values of these (180)<sup>3</sup> third-order sensitivities (which turned out to be very large and consequential) and use them for a third-order uncertainty analysis of the PERP benchmark’s leakage response.
文摘This work illustrates the application of the 1<sup>st</sup>-CASAM to a paradigm heat transport model which admits exact closed-form solutions. The closed-form expressions obtained in this work for the sensitivities of the temperature distributions within the model to the model’s parameters, internal interfaces and external boundaries can be used to benchmark commercial and production software packages for simulating heat transport. The 1<sup>st</sup>-CASAM highlights the novel finding that response sensitivities to the imprecisely known domain boundaries and interfaces can arise both from the definition of the system’s response as well as from the equations, interfaces and boundary conditions that characterize the model and its imprecisely known domain. By enabling, in premiere, the exact computations of sensitivities to interface and boundary parameters and conditions, the 1<sup>st</sup>-CASAM enables the quantification of the effects of manufacturing tolerances on the responses of physical and engineering systems.
文摘为提高凝固型酸奶的品质及安全性,将1%、1.5%、2%、2.5%、3%、4%、5%乳清蛋白粉(Whey protein powder,WPP)加入全脂乳粉中生产酸奶,以不添加WPP的凝固型酸奶为对照组,测定酸奶酸度、持水力(WHC)、脱水收缩敏感性(STS)、质构特性、流变学特性和微观结构变化,并进行感官评定,研究不同添加量乳清蛋白粉对凝固型酸奶品质特性的影响,以确定WPP最适添加量。结果表明:随着乳清蛋白粉添加量的增加,酸奶的滴定酸度、持水力、乳酸菌总数、硬度、胶着性、粘弹性、凝胶性逐渐增加,脱水收缩敏感性(STS)逐渐减小;当WPP添加量为2%时,酸奶的持水力、粘弹性都明显提升,STS明显降低,且具有较好的口感、更连续的网络结构,与对照组相比综合品质得到明显提高。
