Synergetic optimization operation method for distribution network based on SOP and PV

The integration of distributed generation brings in new challenges for the operation of distribution networks,including out-of-limit voltage and power flow control.Soft open points(SOP)are new power electronic devices that can flexibly control active and reactive power flows.With the exception of active power output,photovoltaic(PV)devices can provide reactive power compensation through an inverter.Thus,a synergetic optimization operation method for SOP and PV in a distribution network is proposed.A synergetic optimization model was developed.The voltage deviation,network loss,and ratio of photovoltaic abandonment were selected as the objective functions.The PV model was improved by considering the three reactive power output modes of the PV inverter.Both the load fluctuation and loss of the SOP were considered.Three multi-objective optimization algorithms were used,and a compromise optimal solution was calculated.Case studies were conducted using an IEEE 33-node system.The simulation results indicated that the SOP and PVs complemented each other in terms of active power transmission and reactive power compensation.Synergetic optimization improves power control capability and flexibility,providing better power quality and PV consumption rate.

Multi-rate sensor fusion-based adaptive discrete finite-time synergetic control for flexible-joint mechanical systems

This paper proposes an adaptive discrete finite-time synergetic control （ADFTSC） scheme based on a multi-rate sensor fusion estimator for flexible-joint mechanical systems in the presence of unmeasured states and dynamic uncertainties. Multi-rate sensors are employed to observe the system states which cannot be directly obtained by encoders due to the existence of joint flexibilities. By using an extended Kalman filter （EKF）, the finite-time synergetic controller is designed based on a sensor fusion estimator which estimates states and parameters of the mechanical system with multi-rate measurements. The proposed controller can guarantee the finite-time convergence of tracking errors by the theoretical derivation. Simulation and experimental studies are included to validate the effectiveness of the proposed approach.

Synergetic Dispatch of Power System with Integration of Large-Scale Renewable Energy

This paper comes up with a concept of synergetic advanced dispatch in order to deal with the ever-increasing uncertainty in power grid: Decision is made with respecting to AGC units and active load on the basis of synergetic unit combination such that active load’s advantages in regulation speed is put to full use in achieving efficient cooperation with renewable energy power. Meanwhile, factoring in allowable frequency variation range during decision-making may help to reduce AGC units’ regulation load and improve power grid's capacity of accommodating renewable energy power. Calculation example analysis suggested that the model and technique presented in this paper is capable of efficient coordination between active loads and renewable energy power, delivering friendly transition with day-ahead dispatch and AVC control.

Improving plasma sterilization by constructing a plasma photocatalytic system with a needle array corona discharge and Au plasmonic nanocatalyst

Efficient sterilization by a plasma photocatalytic system(PPS)requires strong synergy between plasma and photocatalyst to inactivate microorganisms while suppressing the formation of secondary pollutants.Here,we report that a PPS constructed from a needle array corona discharge and Au/TiO2plasmonic nanocatalyst could remarkably improve the sterilization of Escherichia coli(E.coli)and alleviate formation of the discharge pollutant O3.At 6 kV,the combination of corona discharge and Au/TiO2achieves sterilization efficiency of 100%within an exposure time of 5 min.At 5 kV and an exposure time of 8 min,the presence of Au/TiO2improves sterilization efficiency of the corona discharge from 73%to 91%and reduces the O3concentration from 0.38 to 0.04 ppm,whereas the presence of TiO2reduces the sterilization efficiency and O3concentration to 66%and 0.17 ppm,respectively.The Au/TiO2in the PPS enables a uniform corona discharge,enhances the interaction between plasma,E.coli and nanocatalysts,and suppresses the formation of O3.Further,the Au/TiO2can be excited by ultraviolet-visible light emitted from the plasma to generate electron-hole pairs,and thus contributes to the formation of reactive radicals and the oxidative inactivation of E.coli.The PPS constructed from a needle array corona discharge and Au-based plasmonic nanocatalyst provides a promising approach for developing high-efficiency sterilization techniques.

Homo Faber Scapegoated, or Apocalyptic Artificial Intelligence: Rethinking the Technological Singularity Concept From the Synergetic Historicism Position

The article is focused on discussing a new methodological approach to the study on specifics of transferring human beings to the posthuman cyber society.The approach in question assists in rethinking interconnected problems both of human origins in the universe and mankind’s digital future.And,besides,such an approach allows to deal with self-organising interconversions between the poles of the cardinal dual opposition of the Global Noosphere Brain and the Artificial General Intelligence.Herewith such phenomena of digital social life as Global Digitalisation,Digital Immortality,Mindcloning,and Technological Zombification being the constituents of Technological Singularity Concept,are rethought as paving the way for oncoming Posthuman Digital Era.This concept is evidently exemplified by a bifurcation resulting in two alternatives to be chosen by human beings,to wit,either to be undergone Mindcloning and become digitally immortal or being destroyed by powerful intelligent machines.The investigation in question is based on such a progressive methodology as the Law of Self-Organizing Ideals,as well as on the Method of Dual Oppositions.Rethinking interrelationships between the problem of a sense of social history and the meaning-of-life of local societies members which any intelligent machine is devoid of permits to substantiate specific regularities of Self-Transforming Homo Faber into Homo Digitalis and Technological Zombies ready to be transferred to posthuman cyberspace.

Current Status and Perspectives of Dual-Atom Catalysts Towards Sustainable Energy Utilization

The exploration of sustainable energy utilization requires the imple-mentation of advanced electrochemical devices for efficient energy conversion and storage,which are enabled by the usage of cost-effective,high-performance electro-catalysts.Currently,heterogeneous atomically dispersed catalysts are considered as potential candidates for a wide range of applications.Compared to conventional cata-lysts,atomically dispersed metal atoms in carbon-based catalysts have more unsatu-rated coordination sites,quantum size effect,and strong metal-support interactions,resulting in exceptional catalytic activity.Of these,dual-atomic catalysts(DACs)have attracted extensive attention due to the additional synergistic effect between two adja-cent metal atoms.DACs have the advantages of full active site exposure,high selectiv-ity,theoretical 100%atom utilization,and the ability to break the scaling relationship of adsorption free energy on active sites.In this review,we summarize recent research advancement of DACs,which includes(1)the comprehensive understanding of the synergy between atomic pairs;(2)the synthesis of DACs;(3)characterization meth-ods,especially aberration-corrected scanning transmission electron microscopy and synchrotron spectroscopy;and(4)electrochemical energy-related applications.The last part focuses on great potential for the electrochemical catalysis of energy-related small molecules,such as oxygen reduction reaction,CO_(2) reduction reaction,hydrogen evolution reaction,and N_(2) reduction reaction.The future research challenges and opportunities are also raised in prospective section.

Synergistically constructed lamination-like network of redox-active polyimide and MXene via π-π interactions for aqueous NH_(4)^(+) storage

As a nonmetallic charge carrier,ammonium ion(NH_(4)^(+))has garnered significant attention in the construction of aqueous batteries due to its advantages of low molar mass,small hydration size and rapid diffusion in aqueous solutions.Polymers are a kind of potential electro-active materials for aqueous NH_(4)^(+)storage.However,traditional polymer electrodes are typically created by covering the bulky collectors with excessive additives,which could lead to low volume capacity and unsatisfactory stability.Herein,a nanoparticle-like polyimide(PI)was synthesized and then combined with MXene nanosheets to synergistically construct an additive-free and self-standing PI@MXene composite electrode.Significantly,the redox-active PI nanoparticles are enclosed between conductive MXene flakes to create a 3D lamination-like network that promotes electron transmission,while theπ-πinteractions existing between PI and MXene contribute to the enhanced structural integrity and stability within the composite electrode.As such,it delivers superior aqueous NH_(4)^(+)storage behaviors in terms of a notable specific capacity of 110.7 mA·h·cm^(–3) and a long lifespan with only 0.0064%drop each cycle.Furthermore,in-situ Raman and UV–Vis examinations provide evidence of reversible and stable redox mechanism of the PI@MXene composite electrode during NH_(4)^(+)uptake/removal,highlighting its significance in the area of electrochemical energy storage.

Integrated adsorption and photocatalytic removal of methylene blue dye from aqueous solution by hierarchical Nb_(2)O_(5)@PAN/PVDF/ANO composite nanofibers

This work presents the development of hierarchical niobium pentoxide(Nb_(2)O_(5))-based composite nanofiber membranes for integrated adsorption and photocatalytic degradation of methylene blue(MB)pollutants from aqueous solutions.The Nb_(2)O_(5) nanorods were vertically grown using a hydrothermal process on a base electrospun nanofibrous membrane made of polyacrylonitrile/polyvinylidene fluoride/ammonium niobate(V)oxalate hydrate(Nb_(2)O_(5)@PAN/PVDF/ANO).They were characterized using field-emission scanning electron microscopy(FE-SEM),X-ray diffraction(XRD)analysis,and Fourier transform infrared(FTIR)spectroscopy.These composite nanofibers possessed a narrow optical bandgap energy of 3.31 eV and demonstrated an MB degradation efficiency of 96%after 480 min contact time.The pseudo-first-order kinetic study was also conducted,in which Nb_(2)O_(5)@PAN/PVDF/ANO nanofibers have kinetic constant values of 1.29×10^(-2) min^(-1) and 0.30×10^(-2) min^(-1) for adsorption and photocatalytic degradation of MB aqueous solutions,respectively.These values are 17.7 and 7.8 times greater than those of PAN/PVDF/ANO nanofibers without Nb_(2)O_(5) nanostructures.Besides their outstanding photocatalytic performance,the developed membrane materials exhibit advantageous characteristics in recycling,which subsequently widen their practical use in environmental remediation applications.

Visible Light-Induced Photocatalysis:Self-Fenton Degradation of p-CIPhOH Over Graphitic Carbon Nitride by a Polyethylenimine Bifunctional Catalyst

Deep degradation of organic pollutants by sunlight-induced coupled photocatalytic and Fenton (photo-Fenton) reactions is of immense importance for water purification. In this work, we report a novel bifunctional catalyst (Fe-PEI-CN) by codoping graphitic carbon nitride (CN) with polyethyleneimine ethoxylated (PEI) and Fe species, which demonstrated high activity during p-chlorophenol (p-ClPhOH) degradation via H_(2)O_(2) from the photocatalytic process. The relationship between the catalytic efficiency and the structure was explored using diff erent characterization methods. The Fe modification of CN was achieved through Fe-N coordination, which ensured high dispersion of Fe species and strong stability against leaching during liquid- phase reactions. The Fe modification initiated the Fenton reaction by activating H_(2)O_(2) into ·OH radicals for deep degradation of p-ClPhOH. In addition, it eff ectively promoted light absorption and photoelectron-hole (e-h ^(+) ) separation, corresponding to improved photocatalytic activity. On the other hand, PEI could significantly improve the ability of CN to generate H_(2)O_(2) through visible light photocatalysis. The maximum H_(2)O_(2) yield reached up to 102.6 μmol/L, which was 22 times higher than that of primitive CN. The cooperation of photocatalysis and the self-Fenton reaction has led to high-activity mineralizing organic pollutants with strong durability, indicating good potential for practical application in wastewater treatment.

Electrochemical hydrogen storage characteristics of Ti_(0.10)Zr_(0.15)V_(0.35)Cr_(0.10)Ni_(0.30)-10% LaNi_3 composite and its synergetic effect

Hydrogen storage composite alloy Ti0.10Zr0.15V0.35Cr0.10Ni0.30–10% LaNi3 was prepared by two-step arc-melting to improve the electro-catalytic activity and the kinetic performance of Ti-V-based solid solution alloy. The electrochemical properties and synergetic effect of the composite alloy electrode were systematically investigated by using X-ray diffractometry, field emission scanning electron microscopy, energy-dispersive spectrometry, electrochemical impedance spectroscopy and galvanostatic charge/discharge test. It is found that the main phase of the composite alloy is composed of V-based solid solution phase with a BCC structure and C14 Laves phase with hexagonal structure, while the secondary phase is formed in the composite alloy. The comprehensive electrochemical properties of the composite alloy electrode are significantly improved. The activation cycle number, the maximum discharge capacity and the low temperature dischargeability of the composite alloy are 5 cycles, 362.5 mA-h/g and 65.84% at 233 K, respectively. It is suggested that distinct synergetic effect occurs in the activation process, composite process, cyclic process and discharge process at a low or high temperature under different current densities, in the charge–transfer resistance and exchange current density.

Synergetic strengthening mechanism of ultrasound combined with calcium fluoride towards vanadium extraction from low-grade vanadium-bearing shale

The effect and mechanism of ultrasound and CaF_(2) on vanadium leaching from vanadium-bearing shale were investigated systematically.In consideration of the enhancement for vanadium recovery,the combination of ultrasound and CaF_(2)(66.28%) exerts more evident effects than ultrasound(26.97%) and CaF_(2)(60.35%) alone,demonstrating the synergetic effect of ultrasound and CaF_(2).Kinetic analysis manifests that the product layer diffusion controls vanadium leaching in ultrasound system without CaF_(2),however product layer diffusion and interfacial reaction is the rate-controlling step for vanadium leaching in other three leaching systems.The combination of ultrasound and CaF_(2) notably decreases the activation energy(E_(a)) from 62.03 to 27.61 kJ/mol,nevertheless individual CaF_(2) only reduces the E_(a) to 50.70 kj/mol.X-ray diffraction and fourier transform infrared spectrometer analyses show that the decomposition degree of the vanadium-bearing mica structure is the most significant in ultrasound and CaF_(2) system,proving the highest release degree of vanadium.Specific surface area and pore distribution combined with scanning electron microscope analyses reveal that the action of ultrasound and CaF_(2) would provide higher specific surface area,more abundant pores structure and cracks for the particles,which further prompts the rapid diffusion of H^(+),F^(-)and HF,and achieves the conspicuous improvement of vanadium leaching recovery.

Experimental investigation on synergetic prediction of granite rockburst using rock failure time and acoustic emission energy

The frequent occurrence of rockburst and the difficulty in predicting were considered in deep engineering and underground engineering.In this work,laboratory experiments on rockburst under true triaxial conditions were carried out with granite samples.Combined with the deformation characteristics of granite,acoustic emission(AE)technology was well applied in revealing the evolution law of micro-cracks in the process of rockburst.Based on the comprehensive analysis of acoustic emission parameters such as impact,ringing and energy,the phased characteristics of crack propagation and damage evolution in granite were obtained,which were consistent with the stages of rock deformation and failure.Subsequently,based on the critical point theory,the accelerated release characteristics of acoustic emission energy during rockburst were analyzed.Based on the damage theory,the damage evolution model of rock under different loading conditions was proposed,and the prediction interval of rock failure time was ascertained concurrently.Finally,regarding damage as an intermediate variable,the synergetic prediction model of rock failure time was constructed.The feasibility and validity of model were verified.

Synergetic effect between non-thermal plasma and photocatalytic oxidation on the degradation of gas-phase toluene: Role of ozone

In this study, a hybrid process using non‐thermal plasma (NTP) and photocatalytic oxidation (PCO) was adopted for the degradation of gas‐phase toluene using TiO2 as the photocatalyst. To discover the synergetic effect between NTP and PCO, the performances of both sole (O3, UV, NTP, and PCO) and combined (O3 + TiO2, O3 + UV, NTP + UV, O3 + PCO, and NTP + PCO) processes were investigated from different perspectives, such as the toluene removal efficiency, selectivity of COx, mineralization rate, ozone utilization, and the generation of by‐products. The toluene removal efficiency of the combined NTP + PCO process was 80.2%, which was much higher than that of a sole degradation process such as NTP (18.8%) and PCO (13.4%). The selectivity of CO2 and the ozone utilization efficiency also significantly improved. The amount of by‐products in the gas phase and the carbon‐ based intermediates adsorbed on the catalyst surface dramatically reduced. The improvement in the overall performances of the combined NTP + PCO process was mainly ascribed to the efficient utilization of ozone in the photocatalytic oxidation, and the ozone further acting as an electron acceptor and scavenger, generating more hydroxyl radicals and reducing the recombination of electron‐ hole pairs.

Degradation of 4-Chlorophenol Solution by Synergetic Effect of Dual-frequency Ultrasound with Fenton Reagent

4-Chlorophenol (4-CP) solution was treated by dual-frequency ultrasound inconjunction with Fenton reagent, and obvious improvement in the 4-CP degradation rate was observedin this advanced oxidation process. Experimental results showed that ultrasonic intensity,saturating gas and pH value affected greatly the 4-CP removal rate. Among four different saturatinggases (Ar, O_2, air and N_2), 4-CP degradation with Ar-saturated solution was the best. However, inthe view of practical wastewater treatment, using oxygen as the saturating gas would be moreeconomical. The addition of Fenton reagent followed the first-order kinetics and increased the 4-CPdegradation rate. The 4-CP removal rate increased by around 126% within 15 min treatment. Thesynergetic effect of dual-frequency ultrasound with Fenton reagent on 4-CP degradation was obviouslyobserved.

Enhancing toluene removal in a plasma photocatalytic system through a black TiO2 photocatalyst

An efficient toluene removal in air using a plasma photocatalytic system（PPS） not only needs favorable surface reactions over photocatalysts under the action of plasma,but also requires the photocatalysts to efficiently absorb light emitted from the discharge for driving the photocatalytic reactions. We report here that the PPS constructed by integrating a black titania（B-TiO2）photocatalyst with a dielectric barrier discharge（DBD） can effectively remove toluene with above 70% CO2 selectivity and remarkably reduced the concentration of secondary pollutants of ozone and nitrogen oxides at a specific energy input of 1500 J·l-1,while exhibiting good stability. Photocatalyst characterizations suggest that the B-TiO2 provides a high concentration of oxygen vacancies for the surface oxidation of toluene in DBD,and efficiently absorbs ultraviolet–visible light emitted from the discharge to induce plasma photocatalytic oxidation of toluene. The presence of B-TiO2 in the plasma region also results in a high discharge efficiency,facilitating the generation of large numbers of reactive species and thus the oxidation of toluene towards CO2. The greatly enhanced performance of the PPS integrated with B-TiO2 in toluene removal offers a promising approach to efficiently remove refractory volatile organic compounds from air at low temperatures.

Synergetic photo-epoxidation of propylene with molecular oxygen over bimetallic Au–Ag/TS-1 photocatalysts

Au-Ag bimetallic nanoparticle‐supported microporous titanium silicalite‐1catalysts were prepared via a hydrothermal‐immersion method,and their structures were examined.These materials serve as efficient catalysts for the photosynthesis of propylene oxide via the epoxidation of propene.The Au/Ag mass ratio and reaction temperature were demonstrated to have significant effects on the catalytic activity and selectivity of propylene oxide.The optimal formation rate(68.3μmol/g·h)and selectivity(52.3%)toward propylene oxide were achieved with an Au:Ag mass ratio of4:1.Notably,the strong synergistic effect between Au and Ag resulted in superior photocatalysis of the bimetallic systems compared with those of the individual systems.A probable reaction mechanism was proposed based on the theoretical and experimental results.

MULTIPLE ATTRIBUTE NETWORK SELECTION ALGORITHM BASED ON AHP AND SYNERGETIC THEORY FOR HETEROGENEOUS WIRELESS NETWORKS

It is a hot issue in communication research field to select the best network for Heterogeneous Wireless Networks(HWNs),and it is also a difficult problem to reduce the handoff number of vertical handoff.In order to solve this problem,the paper proposes a multiple attribute network selection algorithm based on Analytic Hierarchy Process(AHP)and synergetic theory.The algorithm applies synergetics to network selection,considering the candidate network as a compound system composed of multiple attribute subsystems,and combines the subsystem order degree with AHP weight to obtain entropy of the compound system,which is opposite the synergy degree of a network system.The greater the synergy degree,the better the network performance.The algorithm takes not only the coordination of objective attributes but also Quality of Service(QoS)requirements into consideration,ensuring that users select the network with overall good performance.The simulation results show that the proposed algorithm can effectively reduce the handoff number and provide uses with satisfactory QoS according to different services.

Synergetic effect between sulfurized Mo/γ-Al_2O_3 and Ni/γ-Al_2O_3 catalysts in hydrodenitrogenation of quinoline

An evidence for the synergetic effect between the stacked bed of Mo/γ-Al2O3 and Ni/γ-Al2O3 in the hydrodenitrogenation （HDN） reaction of quinoline has been provided in this paper. The synergism factor decreases when the reaction temperature increases （280？340 ？C）. The synergetic effect leads to improve the hydrogenation activity for the stacked bed compared with the single Mo/γ-Al2O3 bed, which may be attributed to the generation of hydrogen spillover on the Ni/γ-Al2O3 catalyst.

Synergetic Effects of UV/Fe^(3+) Combined with Electrocatalysis for p-Nitrophenol Degradation

Synergetic effects for p-nitrophenol degradation were observed in the combination of two-advanced oxidation processes, UV/Fe3+ and electrocatalysis. The enhancement of removal rate for p-nitrophenol and COD was around 123% and 278%, respectively. The possible contributions for the synergetic effects were the electrochemically regeneration of ferric ion and the role of the oxygen that formed on the anode.

Synergistic instability of coal pillar and roof system and filling method based on plate model

The security challenges from room and pillar gobs include land subsidence, spontaneous combustion of coal pillars and mine flood caused by gob water. To explore the instability mechanism of room and pillar gob, we established a mechanical model of elastic plate on elastic foundation in which pillars and hard roofs were considered as continuous Winkler foundations and elastic plates, respectively. The synergetic instability of pillar and roof system was analyzed based on plate bending theory and catastrophe theory. In addition, mechanical conditions and math criterion of roof failure and overall instability of coal pillar and roof system were given. Through analyzing both advantages and disadvantages of some technologies such as induced caving, filling, gob sealing and isolation, we presented a new filling method named box-filling, in view of box foundation theory, to control the disasters of ground collapse, water inrush and mine fire. In a gob's treatment project in Ordos, safety assessment and filling design of a room and pillar gob have been done by the mechanical model. The results show that the gob will collapse when the pillars' average yield band is wider than 0.93 m, and box-filling can control land collapse, mine flood and mine fire economically and efficiently. So it is worth to study further and popularize.