Methane partial oxidation to methanol (MPOM) using dielectric barrier discharge over a Fe2O3-CuO/γ-Al2O3 catalyst was performed.The multicomponent catalyst was combined with plasma in two different configurations,i...Methane partial oxidation to methanol (MPOM) using dielectric barrier discharge over a Fe2O3-CuO/γ-Al2O3 catalyst was performed.The multicomponent catalyst was combined with plasma in two different configurations,i.e.,in-plasma catalysis (IPC) and post-plasma catalysis (PPC).It was found that the catalytic performance of the catalysts for MPOM was strongly dependent on the hybrid configuration.A better synergistic performance of plasma and catalysis was achieved in the IPC configuration,but the catalysts packed in the discharge zone showed lower stability than those connected to the discharge zone in sequence.Active species,such as ozone,atomic oxygen and methyl radicals,were produced from the plasma-catalysis process,and made a major contribution to methanol synthesis.These active species were identified by the means of in situ optical emission spectra,ozone measurement and FT-IR spectra.It was confirmed that the amount of active species in the IPC system was greater than that in the PPC system.The results of TG,XRD,and N2 adsorption-desorption revealed that carbon deposition on the spent catalyst surface was responsible for the catalyst deactivation in the IPC configuration.展开更多
基金supported by the National Natural Science Foundation of China(No. 20836008 and U0633003)the Zhejiang Provincial Natural Science Foundation of China(No. Y5080192)+3 种基金the Project of Science and Technology Department of Zhejiang Province of China(2007C13061)MOST Project of China(No. 2007AA06Z339,No. 2008BAC32B06 and No. 2007AA06A409)the Open Project Program of Key Laboratory of Non-point Sources Pollution Controlthe Ministry of Agriculture of the People’s Republic of China and Science Foundation of Chinese University
文摘Methane partial oxidation to methanol (MPOM) using dielectric barrier discharge over a Fe2O3-CuO/γ-Al2O3 catalyst was performed.The multicomponent catalyst was combined with plasma in two different configurations,i.e.,in-plasma catalysis (IPC) and post-plasma catalysis (PPC).It was found that the catalytic performance of the catalysts for MPOM was strongly dependent on the hybrid configuration.A better synergistic performance of plasma and catalysis was achieved in the IPC configuration,but the catalysts packed in the discharge zone showed lower stability than those connected to the discharge zone in sequence.Active species,such as ozone,atomic oxygen and methyl radicals,were produced from the plasma-catalysis process,and made a major contribution to methanol synthesis.These active species were identified by the means of in situ optical emission spectra,ozone measurement and FT-IR spectra.It was confirmed that the amount of active species in the IPC system was greater than that in the PPC system.The results of TG,XRD,and N2 adsorption-desorption revealed that carbon deposition on the spent catalyst surface was responsible for the catalyst deactivation in the IPC configuration.