A Study on Synthesis Kinetics of YBa_2Cu_3O_x High Tc Superconductor Powder

The synthesis kinetics of YBa_2Cu_30_x supercon- ductor was studied through comparing the calcina- tion (sintering) processes of different kinds of powders. It was shown that the temperature of synthesis of YBa_2Cu_30_x phase can be lowered from 950℃ to 800℃ through direct calcination of multiphase powder with uniform chemical com- position. The stress which is caused by the volume change during synthetic reaction breaks the particles. It facilitates the formation of highly active superfines of superconductor.

Kinetics of synthesis of Li_4Ti_5O_(12) through solid-solid reaction

Sohd-solid reaction under low heat or low temperature is an approach to synthesize various kinds of materials that were widely used in electrochemistry field. In this paper a theoretical treatment has been presented for analyzing the mechanism of sohd-solid reaction and deriving a series of formulae to describe the variation and rate of reactions. This new model has been used in the manufacturing of spinel Li4Ti5O12. The results show that this new model works very well and will play a useful role for guiding the manufacturing of electrochemical materials.

Catalytic kinetics of dimethyl ether one-step synthesis over CeO_2–CaO–Pd/HZSM-5 catalyst in sulfur-containing syngas process

CeO_2–CaO–Pd/HZSM-5 catalyst was prepared for the dimethyl ether(DME) one-step synthesis in a continuous fixed-bed micro-reactor from the sulfur-containing syngas. The catalytic stability over hybrid catalyst of CeO_2–CaO–Pd/HZSM-5 was investigated to ensure that the kinetics experimental results were not significantly influenced by induction period and catalytic deactivation. A large number of kinetic data points(40 sets) were obtained over a range of temperature(240–300 °C), pressure(3–4 MPa), gas hourly space velocity(GHSV)(2000–3000 L·kg^(-1)·h^(-1)) and H_2/CO mole ratio(2–3). Kinetic model for the methanol synthesis reaction and the dehydration of methanol were obtained separately according to reaction mechanism and Langmuir–Hinshelwood mechanism. Regression parameters were investigated by the method combining the simplex method and Runge–Kutta method. The model calculations were in appropriate accordance with the experimental data.

Synthesis Characterization Non-isothermal Kinetics of the Thermal Decomposition and Redox Properties Derived from Copper(Ⅱ) Binuclear Coordination Compound of 1,4-Bis-(1'-Phenyl-3'-Methyl-5'-Pyrazolone-4')-1,4-Butanedione

The paper reports the synthetic procedure and character of Copper(II) binuclearcoordination compound of 1,4-bis-(1'-phenyl-3'-methyl-5'-pyrazolone Thenon-isothermal kinetics of thermal decomposition of the complex has been stUdied from the TG-DTGcurves by means of the Achar et al. and Coats-Redfern methods,the most probab1e kinetic equation canbe expressed as dofdtrAe -E / RT * l /(2Q).The corresponding kinetic compensation effect expressions arefound to be lnuA=0. 1794E+0. 1689.The non-isothermal thermal decomposition process of the complex isone-dimensional diffusion.But electrochemical studies of the complex(Cu2L'2)from cyclic voltamrnetriccurves by means of powder microelectrodes technique'',shows one two-electron irreversible process.

Role of size and pretreatment of Pd particles on their behaviour in the direct synthesis of H_2O_2

Two families of catalysts, based on Pd nanoparticles supported on ceramic asymmetric tubular alumina membranes, are studies in the direct synthesis of H2O2. They are prepared by depositing Pd in two ways：（i） reduction with N2H4 in an ultrasonic bath and（ii） by impregnation-deposition. The first preparation leads to larger particles, with average size of around 11 nm, while the second preparation leads to smaller particles, with average size around 4 nm. The catalytic membranes were tested as prepared, after thermal treatment in air and after further pre-reduction with H2 in mild（100 ℃） conditions. Samples were characterized by TEM, CO-chemisorption monitored by DRIFTS method and TPR, while catalytic tests have been performed in a semi-batch recirculation membrane reactor. Experimental catalytic results were analysed using two kinetics models to derive the reaction constants for the parallel and consecutive reactions of the kinetic network. Smaller particles of Pd show lower selectivity due to the higher rate of parallel combustion, even if the better dispersion of Pd and thus higher metal surface area in the sample lead to a productivity in H2O2 similar or even higher than the sample with the larger Pd particles. Independently on the presence of smaller or larger Pd nanoparticles, an oxidation treatment leads to a significant enhancement in the productivity, although the catalyst progressively reduces during the catalytic process. The inhibition of the parallel combustion reaction（to water） induced from the calcination treatment remains after the in-situ reduction of the oxidized Pd species formed during the pre-treatment.This is likely due to the elimination of defect sites which dissociatively activate oxygen, and tentatively attributed to Pd sites able to give three- and four-fold coordination of CO.

Sono-assisted preparation of magnetic ferroferric oxide/graphene oxide nanoparticles and application on dye removal

A simple ultrasound-assisted co-precipitation method was developed to prepare ferroferric oxide/graphene oxide magnetic nanoparticles(Fe_3O_4/CO MNPs).The hysteresis loop of Fe_3O_4/GO MNPs demonstrated that the sample was typical of superparamagnetic material.The samples were characterized by transmission electron microscope,and it is found that the particles are of small size.The Fe_3O_4/GO MNPs were further used as an adsorbent to remove Rhodamine B.The effects of initial pH of the solution,the dosage of adsorbent,temperature,contact time and the presence of interfering dyes on adsorption performance were investigated as well.The adsorption equilibrium and kinetics data were fitted well with the Freundlich isotherm and the pseudosecond-order kinetic model respectively.The adsorption process followed intra-particle diffusion model with more than one process affecting the adsorption of Rhodamine B.And the adsorption process was endothermic in nature.Furthermore,the magnetic composite with a high adsorption capacity of Rhodamine B could be effectively and simply separated using an external magnetic field.And the used particles could be regenerated and recycled easily.The magnetic composite could find potential applications for the removal of dye pollutants.

Kinetic studies of methanol synthesis from CO_2+H_2 over copper based catalysts

The catalytic activity for the synthesis of methanol from carbon dioxide and hydrogen was measured on various binary and ternary catalysts containing copper oxide under a pressure of 10 atm. Among these samples the catalysts, CuO/ZnO/γ-Al_2O_3, demonstrated the highest activity and selectivity to methanol; MnO, as third component, had no promotional effect on the activity of meth- anol formation. Based on a simple power rate law the apparent activation energy estimation and par- tial pressure dependence measurement were accomplished over eight catalysts. The activation energies varied from 40 to 120 kJ / mol depending on the composition of catalysts. The rates of methanol for- mation to be 0.3 -- 0.9 order in H_2 and about 0.1 -- 0.2 order in CO_2 were reported.

Preparation of Silver Nanowires via a Rapid,Scalable and Green Pathway

Rapid synthesis of silver nanowires(Ag NWs) with high quality and a broad processing window is challenging because of the low selectivity of the formation of multiply twinned particles at the nucleation stage for subsequent Ag NWs growth.Herein we report a systematic study of the water-involved heterogeneous nucleation of Ag NWs with high rate(less than 20 min) in a simple and scalable preparation method.Using glycerol as a reducing agent and a solvent with a high boiling point,the reaction is rapidly heated to 210 ℃ in air to synthesize Ag NWs with a very high yield in gram level.It is noted that the addition of a small dose of water plays a key role for obtaining highly pure Ag NWs in high yield,and the optimal water/glycerol ratio is0.25%.After investigating a series of forming factors including reaction temperature and dose of catalysts,the formation kinetics and mechanism of the Ag NWs are proposed.Compared to other preparation methods,our strategy is simple and reproducible.These Ag NWs show a strong Raman enhancement effect for organic molecules on their surface.