Effects of supplementary urea-minerals lick block on the kinetics of fibre digestion, nutrient digestibility and nitrogen utilization of low quality roughages

Three yearling lambs with a rumen cannula were used to investigate the effects of supplementation with an urea-minerals lick block (ULB) on the kinetics of ruminal fibre digestion, nutrient digestibility and nitrogen (N) utilization of rice straw (RS), ammonia bicarbonate (AB)-treated RS (ABRS) and hay prepared from natural pasture. The digestibility of dry matter and organic matter of RS increased by 13.1% and 12.7% (P<0.05) when the diet was supplemented with ULB, and approached to that of ABRS, indicating that the effect of ULB on digestibility of RS is similar to that of AB treatment. The digestibility of ABRS was slightly improved by the ULB feeding. Nitrogen retention was highest in lambs fed on ABRS alone, followed by hay with ULB, and was lowest in animals fed on RS with ULB. However, both the amount and proportion of N retention to N intake were enhanced by ULB supplementation to lambs fed on hay. The proportion of N retained to N digested decreased due to ULB sup-plementation to lambs fed on RS or ABRS. Supplementing ULB did not greatly influence the rumen degradation of either dry matter or crude protein in each of the three diets. RS and hay had similar values in the potential extent of digestion (PED) and digestion rate of PED (kd) of fibrous materials, but the discrete lag time for RS was lower than that for hay. The AB treatment significantly increased the PED (P<0.05) and kd (P<0.05) of RS. Neither the PED nor kd for RS and ABRS was influenced by ULB supplementation, but the kd for hay significantly increased due to ULB. The lag time for hay was also shortened by the ULB feeding. The ULB improved the digestion of fibre in the rumen of lambs fed on low quality roughage. It is inferred that while ULB is effective in increasing nutrient digestibility of low quality roughages by improving ruminal fibre digestion. A synchronized supply of N and energy to rumen microbes should be considered to improve the efficiency of N utilization when the basal diet is ammoniated straw.

Application of GIS in Mineral Resource Prediction of Synthetic Information

This paper introduces the formation mechanism and synthetic information prediction of large and superlarge deposits in Shandong Province by analyzing and studying on the GIS platform. The authors established a prospecting model of synthetic information from large and superlarge gold deposit concentration region, and the multi-source spatial database from concentration region of deposits and anomalies. On the basis of the spatial database, a target map layer, a model map layer and a predictive map layer were set up. Based on these map layers, geological variables of the model unit and predictive unit were extracted, then launched location and quantitative prediction of the gold deposit concentration region. The achievement of predicting large and superlarge deposits by the GIS platform has enabled the authors to design automation (or semi-automatic) interpretation subsystems, namely geophysics, geochemistry, geologic prospecting and comprehensive prognosis, and a set of the applicable GIS software for mineral resources prognosis of synthetic information.

Prospects of utilization of waste dumped low-grade limestone for iron making: A case study

Low grade dumped limestone sample having high silica of 8.1%, 36.8% CaO, and 3% Al2O3 has been studied with the aim to reduce the silica level to below 3% for its utilization in iron making. Beneficiation study of the sample was initiated with desliming of the feed sample of -100 μm to remove the siliceous ultrafine particles and to improve the feed quality. Flotation study was carried out by column flotation technique varying the collector dosage, superficial air flow velocity and froth depth to assess their effect on silica reduction and CaO recovery. It was observed that increased collector dosage and superficial air velocity increases the recovery of CaO, and increase in the froth depth reduces the mass flow and silica content in the concentrate. The best result was found at 1.25 cm/sec superficial air velocity, 25 cm froth depth, 1.25 kgpt collector dosage and concentrate assayed 47.3% CaO, 2.8% silica with 72% CaO recovery.

Development and Utilization of the World＇s and China＇s Bulk Mineral Resources and their Supply and Demand Situation in the Next Twenty Years

Bulk mineral resources of iron ores, copper ores, bauxite, lead ores, zinc ores and potassium salt play a pivotal role on the world＇s and China＇s economic development. This study analyzed and predicted their resources base and potential, development and utilization and their world＇s and China＇s supply and demand situation in the future 20 years. The supply and demand of these six bulk mineral products are generally balanced, with a slight surplus, which will guarantee the stability of the international mineral commodity market supply. The six mineral resources （especially iron ores and copper ores） are abundant and have a great potential, and their development and utilization scale will gradually increase. Till the end of 2014, the reserve- production ratio of iron, copper, bauxite, lead, zinc ores and potassium salt was 95 years, 42 years, 100 years, 17 years, 37 years and 170 years, respectively. Except lead ores, the other five types all have reserve-production ratio exceeding 20 years, indicative of a high resources guarantee degree. If the utilization of recycled metals is counted in, the supply of the world＇s six mineral products will exceed the demand in the future twenty years. In 2015-2035, the supply of iron ores, refined copper, primary aluminum, refined lead, zinc and potassium salt will exceed their demand by 0.4-0.7 billion tons （Gt）, 5.0-6.0 million tons （Mt）, 1.1-8.9 Mt, 1.0-2.0 Mt, 1.2-2.0 Mt and 4.8-5.6 Mt, respectively. It is predicted that there is no problem with the supply side of bulk mineral products such as iron ores, but local or structural shortage may occur because of geopolitics, monopoly control, resources nationalism and trade friction. Affected by China＇s compressed industrialized development model, the demand of iron ores （crude steel）, potassium salt, refined lead, refined copper, bauxite （primary aluminum） and zinc will gradually reach their peak in advance. The demand peak of iron ores （crude steel） will reach around 2015, 2016 for potassium salt, 2020 for refined lead, 2021 for bauxite （primary aluminum）, 2022 for refined copper and 2023 for zinc. China＇s demand for iron ores （crude steel）, bauxite （primary aluminum） and zinc in the future 20 years will decline among the world＇s demand, while that for refined copper, refined lead and potassium salt will slightly increase. The demand for bulk mineral products still remains high. In 2015-2035, China＇s accumulative demand for iron ores （crude steel） will be 20.313 Gt （13.429 Gt）, 0.304 Gt for refined copper, 2.466 Gt （0.616 Gt） of bauxite （primary aluminum）, 0.102 Gt of refined lead, 0.138 Gt of zinc and 0.157 Gt of potassium salt, and they account for the world＇s YOY （YOY） accumulative demand of 35.17%, 51.09%, 48.47%, 46.62%, 43.95% and 21.84%, respectively. This proportion is 49.40%, 102.52%, 87.44%, 105.65%, 93.62% and 106.49% of that in 2014, respectively. From the supply side of China＇s bulk mineral resources, it is forecasted that the accumulative supply of primary （mine） mineral products in 2015-2035 is 4.046 Gt of iron ores, 0.591 Gt of copper, 1.129 Gt of bauxite, 63.661 Mt of （mine） lead, 0.109 Gt of （mine） zinc and 0.128 Gt of potassium salt, which accounts for 8.82%, 13.92%, 26.67%, 47.09%, 33.04% and 15.56% of the world＇s predicted YOY production, respectively. With the rapid increase in the smelting capacity of iron and steel and alumina, the rate of capacity utilization for crude steel, refined copper, alumina, primary aluminum and refined lead in 2014 was 72.13%, 83.63%, 74.45%, 70.76% and 72.22%, respectively. During 2000-2014, the rate of capacity utilization for China＇s crude steel and refined copper showed a generally fluctuating decrease, which leads to an insufficient supply of primary mineral products. It is forecasted that the supply insufficiency of iron ores in 2015-2035 is 17.44 Gt, 0.245 Gt of copper in copper concentrates, 1.337 Gt of bauxite, 38.44 Mt of lead in lead concentrates and 29.19 Mt of zinc in zinc concentrates. China has gradually raised the utilization of recycled metals, which has mitigated the insufficient supply of primary metal products to some extent. It is forecasted that in 2015-2035 the accumulative utilization amount of steel scrap （iron ores） is 3.27 Gt （5.08 Gt）, 70.312 Mt of recycled copper, 0.2 Gt of recycled aluminum, 48 Mt of recycled lead and 7.7 Mt of recycled zinc. The analysis on the supply and demand situation of China＇s bulk mineral resources in 2015-2035 suggests that the supply-demand contradiction for these six types of mineral products will decrease, indicative of a generally declining external dependency. If the use of recycled metal amount is counted in, the external dependency of China＇s iron, copper, bauxite, lead, zinc and potassium salt will be 79%, 65%, 26%, 8%, 16% and 18% in 2014, respectively. It is predicted that this external dependency will decrease to 62%, 64%, 20%, -0.93%, 16% and 14% in 2020, respectively, showing an overall decreasing trend. We propose the following suggestions correspondingly. （1） The demand peak of China＇s crude steel and potassium salt will reach during 2015-2023 in succession. Mining transformation should be planned and deployed in advance to deal with the arrival of this demand peak. （2） The supply-demand contradiction of China＇s bulk mineral resources will mitigate in the future 20 years, and the external dependency will decrease accordingly. It is suggested to adjust the mineral resources management policies according to different minerals and regions, and regulate the exploration and development activities. （3） China should further establish and improve the forced mechanism of resolving the smelting overcapacity of steel, refined copper, primary aluminum, lead and zinc to really achieve the goal of ＂reducing excess production capacity＂. （4） In accordance with the national strategic deployment of ＂One Belt One Road＂, China should encourage the excess capacity of steel, copper, alumina and primary aluminum enterprises to transfer to those countries or areas with abundant resources, high energy matching degree and relatively excellent infrastructure. Based on the national conditions, mining condition and geopolitics of the resources countries, we will gradually build steel, copper, aluminum and lead-zinc smelting bases, and potash processing and production bases, which will promote the excess capacity to transfer to the overseas orderly. （5） It is proposed to strengthen the planning and management of renewable resources recycling and to construct industrial base of renewable metal recycling. （6） China should promote the comprehensive development and utilization of paragenetic and associated mineral species to further improve the comprehensive utilization of bulk mineral resources.

THE ENVIRONMENTAL PROBLEMS AND COUNTERMEASURES OF MINERAL RESOURCES UTILIZATION IN CHINA

ＴＨＥ ＥＮＶＩＲＯＮＭＥＮＴＡＬ ＰＲＯＢＬＥＭＳ ＡＮＤ ＣＯＵＮＴＥＲＭＥＡＳＵＲＥＳ ＯＦ ＭＩＮＥＲＡＬ ＲＥＳＯＵＲＣＥＳ ＵＴＩＬＩＺＡＴＩＯＮ ＩＮ ＣＨＩＮＡＸｕＱｉａｎｇ（徐强）（ＨｅｂｅｉＣｏｌｌｅｇｅｏｆＧｅｏｌｏｇｙ，Ｓｈｉ...

Theory and Method of Mineral Resource Prediction Based on Synthetic Information

Metallogenic prognosis of synthetic information uses the geological body and the mineral resource body as a statistical unit to interpret synthetically the information of geology, geophysics, geochemistry and remote sensing from the evolution of geology and puts all the information into one entire system by drawing up digitalized interpretation maps of the synthetic information. On such basis, different grades and types of mineral resource prospecting models and predictive models of synthetic information can be established. Hence, a new integrated prediction system will be formed of metallogenic prognosis (qualitative prediction), mineral resources statistic prediction (determining targets) and mineral resources prediction (determining resources amount).

Microwave response characteristics and influencing factors of ores based on dielectric properties of synthetic samples

In order to understand the influence of different factors on the microwave response characteristics of ores,the effects of electrical conductivity,metal mineral content,compactness,metal mineral distribution,microwave frequency and temperature on the dielectric properties of synthetic ores(metal mineral and quartz)were studied.Microwave heating tests were carried out on three types of natural ores(Hongtoushan copper ore,Sishanling iron ore and Dandong gold ore)with significant differences in metal mineral contents.The test results showed that under microwave irradiation,the stronger the electrical conductivity of the metal minerals,the smaller the penetration depth in synthetic ore.For those metal minerals with lower electrical conductivity,the microwave absorption coefficient of the synthetic samples increases with increasing metal mineral content.For those metal minerals with higher electrical conductivity,the microwave absorption coefficient of the samples first increases and then decreases as the metal mineral content increases.When the metal minerals are distributed in layers,the penetration depth is much less than that given a uniform distribution.The penetration depth in the sample at microwave frequency of 915 MHz is greater than that at 2.45 GHz.The higher the electrical conductivity of metal minerals used in synthetic ores,the higher the high-temperature sensitivity of electromagnetic shielding coefficient(0.C-500.C).The Hongtoushan copper ore with high metal mineral content exhibits obvious size effect.The effects of ore structure and crystal particle size on the distribution characteristics of microcracks were discussed.Based on the test results,a quantitative prediction model of microwave sensitivity of ore was proposed,which provides guidance for the prediction of ore heating effect and the selection of microwave heating sequence of ore.

Enhancement of Simultaneous Xylose and Glucose Utilization by Regulating ZWF1 and PGI1 in Saccharomyces Cerevisiae

Xylose utilization is one of the key issues in lignocellulose bioconversion.Because of glucose repression,in most engineered yeast with heterogeneous xylose metabolic pathway,xylose is not consumed until glucose is completely utilized.Although simultaneous glucose and xylose utilization have been achieved in yeast by RPE1 deletion,we regulated ZWF1 and PGI1 transcription to improve simultaneous xylose and glucose utilization by controlling the metabolic flux from glucose into the PP pathway.Xylose and glucose consumption increased by approximately 80 and 72%,respectively,whereas ZWF1 was overexpressed by multi-copy plasmids with a strong transcriptional promoter.PGI1 expression was knocked down by promoter replacement; the glucose and xylose metabolism increased when PGI1p was replaced by weak promoters,SSA1p and PDA1p.ZWF1 overexpression decreased while PGI1 down-regulation increased the ethanol yield to some extent in the recombinant strains.

Priority-sequence of mineral resources' development and utilization based on grey relational analysis method

Generally, the sequence decision of the development and utilization of Chinese mineral resources is based on national and provincial overall plan of the mineral resources. Such plan usually cannot reflect the relative size of the suitability of the development and utilization of mineral resources. To solve the problem, the paper has selected the gift condition, the market condition, the technological condition,socio-economic condition and environmental condition as the starting-points to analyze the influential factors of the priority-sequence of mineral resources' development and utilization. The above 5 conditions are further specified into 9 evaluative indicators to establish an evaluation indicator system. At last,we propose a decision model of the priority sequence based on grey relational analysis method, and figure out the observation objects by the suitability index of development. Finally, the mineral resources of a certain province in China were analyzed as an example. The calculation results indicate that silver(2.0057), coal(1.9955), zinc(1.9442), cement limestone(1.9077), solvent limestone(1.5624) and other minerals in the province are suitable for development and utilization.

中国铁矿石选矿技术发展与展望

铁矿石作为钢铁工业最为重要的原材料,是我国重要的战略性矿产资源之一。我国铁矿资源储量丰富,但97%以上属于贫矿,需要经过选矿富集后才能供给高炉炼铁。多年来,在我国选矿工作者的共同努力下,我国铁矿选矿技术得到长足进步和发展。通过回顾我国铁矿选矿技术的发展历程,综述单一弱磁选、单一浮选、重选—磁选—反浮选、磁化焙烧—磁选等主要选矿技术在我国铁矿选矿厂的应用,总结我国典型多金属共生型铁矿石如伴生稀土/萤石型铁矿石、伴生钛铁矿型铁矿石、伴生多金属硫化物型铁矿石和伴生硼铁矿型铁矿石的选矿现状,介绍影响我国铁矿选矿技术进步的关键设备如圆锥破碎机、高压辊磨机、半自磨机、立环脉动高梯度磁选机、高频振动细筛、搅拌磨机等,指出我国铁矿选矿未来要以“高效节能、低碳减排”为原则,以“优质优用、劣质能用”为战略,开发选冶联合工艺,研发大型高效设备,研制低温环保药剂,提高智能控制水平,加强资源综合利用。

月球资源开发利用的进展与展望

中国探月工程“绕、落、回”三步走圆满收官,后续将建立国际月球科研站,并进一步规划建立月球基地。月球探测任务由探测勘察进入到开发利用新阶段,月面资源的勘查、开发和利用是未来月球探测的重点任务。总结了月球资源开发利用方面的国内外重要进展,涉及月球资源勘探、水冰等挥发分分析、月球矿物冶炼与材料制备、月面建造与月壤3D打印等四个方面。同时,月球资源开发利用面临极端月面环境、独特月壤理化特性、全流程无人自主控制等重大挑战,为解决这些问题,提出了未来月球资源开发利用的重点任务和研究思路,可为后续科学研究和工程任务实施提供参考。

湖北宜昌磷矿伴生稀土元素分布规律、赋存状态及其开发利用前景分析

【研究目的】湖北省宜昌磷矿中伴生有稀土元素,研究其分布规律及赋存状态,对稀土元素的回收利用具有重要意义,其作为伴生矿产的综合利用将成为未来稀土矿的重要来源。【研究方法】本文以含稀土磷块岩为主要研究对象,在系统取样的基础上,开展岩矿鉴定、全岩地球化学分析、XRD衍射分析、SEM观察、LA-ICP-MS测试等工作。【研究结果】磷块岩中稀土元素总量ΣREE+Y为63.5×10^(-6)~271.8×10^(-6),不同层位或不同岩性的磷块岩中稀土元素含量有所差异。【结论】稀土元素含量受岩性控制明显,由白云岩→白云质磷块岩→致密块状磷矿石→泥质条带磷块岩→泥岩,含量逐渐升高。微量元素反映出宜昌磷矿的古气候以干热为主,西北部略表现出温暖湿润特点;Ce异常、V/Ni和Y/Ho比值反映海水中EH条件从底部到顶部,即从Ph22成磷期到Ph13成磷期,形成水体环境逐渐氧化。宜昌磷矿中稀土元素总量整体较低,且泥岩较磷块岩中含量高,表明吸附态稀土较类质同象稀土含量高。宜昌伴生稀土磷矿资源丰富,利用合理的技术对稀土元素进行综合回收,对宜昌磷矿资源的合理利用和经济发展有重要意义。

镍资源找矿突破与综合开发利用

镍资源是国民经济发展的重要战略资源,也是重要的关键矿产;我国是全球最大的镍金属消费国,也是镍金属原料稀缺国,镍矿产原料对外依存度居高不下,亟需实现镍资源找矿突破、推动镍资源综合开发利用、拓宽镍资源进口渠道,保障镍资源安全稳定供给。本文在综合分析镍产业最新数据的基础上,梳理了全球和我国镍资源禀赋、供需现状,总结了国内外镍矿床成因类型、时空分布规律和找矿前景,分析了我国镍资源产业发展和供应保障面临的问题,提出了镍矿勘查开发的关键技术及综合利用途径。为保障稳定供应和安全发展,从国际和国内两方面提出了我国镍资源保障路径及对策。在国际方面,稳定以印度尼西亚、菲律宾为代表的重要镍资源进口市场,加大投资镍资源海外矿业项目,增强中资企业的国际竞争能力;加强国际合作,实现镍资源进口渠道的多元化。在国内方面,加大镍资源勘查力度;加强镍资源综合利用,提高再生镍资源利用率;优化传统技术工艺,调整产业结构;强化镍资源储备基地建设,保障有效增储;重视海底铁锰结核等潜在镍矿资源的开采技术研究。

冀东地区尾矿资源调查及综合利用建议

河北省是我国矿产资源大省,尤其是冀东地区的矿产资源开发导致大量尾矿堆存,亟需开展尾矿资源调查和综合利用,实现尾矿的资源化、减量化和无害化。本文调查了冀东地区尾矿和废石的堆存情况,分析了冀东地区典型铁尾矿和金尾矿物理化学性质,提出了综合利用建议。研究结果表明,冀东地区尾矿和废石堆存量分别为33831万m3和108637万m3;尾矿以铁尾矿、金尾矿为主,堆存量分别为33079万m3和752万m3。冀东地区典型铁尾矿中,除水厂铁矿尾泥、司家营铁矿(2#尾矿库)尾矿和清河沿铁矿尾矿外,其他铁尾矿粒径较大,砂粒(2.00~0.05 mm)占比>89%。冀东地区铁尾矿属于高硅低铝型尾矿,除了清河沿铁矿尾矿和黄槐玉铁矿尾矿外,其他铁尾矿SiO2占比>70%。铁尾矿中矿物以石英为主(>43%),其次为黑云母、微斜长石、斜长石、角闪石、白云石和透辉石等。对于冀东地区金尾矿,三家金矿和金厂峪金矿以砂粒为主,均超过90%,其他金尾矿粒径相对较细。冀东地区金尾矿为长英岩型尾矿,SiO2含量明显较铁尾矿低(57.69%~68.65%),而Al2O3含量明显较铁尾矿高(9.32%~16.09%)。金尾矿中主要矿物为石英、斜长石、黑云母、绢云母等,其中,斜长石占比明显较铁尾矿高。根据冀东地区铁尾矿性质,建议将大粒径铁尾矿作为建筑砂,细粒尾矿作为建材原料实现综合利用,剩余尾矿可进行土地复垦。对于金尾矿,建议首先进行井下填充,其次作为建材原料实现综合利用。该研究对冀东地区尾矿资源综合利用具有一定的指导意义。

中国铼资源特征及其勘查开发利用现状

铼(Re)是重要的战略性新兴产业矿产,在现代国防和工业及新兴领域具有广泛的用途。本文在《中国矿产地质志·稀散金属矿卷》研编的基础上,对中国铼矿资源特征和勘查开发利用情况进行进一步总结,认为我国铼矿资源分布比较集中,具有较大的成矿潜力和找矿空间。近年来,铼的矿产勘查取得了重要成果,据不完全统计,截至2021年底,共获得铼查明资源储量787.41 t。从世界上看,铼的规模生产开始于1930年。与世界相比,中国铼工业发展并未形成规模,仍处于初级阶段,且其开发利用严重依赖寄主矿床的开发利用。借鉴国外铼资源的开发利用史,铼的应用从添加剂到催化剂到航空发动机再到量子计算,每一次技术革新都带来对铼资源需求的增长。预测未来10~20 a国内铼的应用将更加多元化,需求也将达到高峰期,铼资源保障程度有待于进一步提高。建议开展全国铼矿资源潜力评价,查明铼的可用资源量和潜力,加强铼资源综合利用和回收产业化,建立铼的战略储备机制。

蒙古国矿业开发现状研究

蒙古国位于“中蒙俄经济走廊”的中间地带,大地构造位置处于中亚造山带的中心部位,成矿条件好,铜、煤、金、铀、萤石等矿产资源丰富。截至2016年,蒙古国1∶5万地质填图仅覆盖全境33.7%,地质工作进展缓慢,矿产开发程度较低。中蒙关系稳定,经贸合作基础扎实,开展矿业开发合作潜力巨大。受资源储量及开发技术条件限制,蒙古国矿业开发主要集中于煤、铜、金、铁、石油、铅锌、萤石等矿种,且矿业开发中受到基础设施薄弱、生产技术条件落后、政策法规缺乏稳定性等制约。建议中资企业应认真研究该国政策法律法规,发挥资金、技术等优势参与开发和利用矿产资源,并关注矿产品深加工领域和锂矿资源开发领域的合作等。

中国碲资源特征及勘查开发利用现状

碲(Te)是重要的战略性新兴产业矿产资源,在现代国防和工业及新兴领域具有广泛的用途。本文在《中国矿产地质志·稀散金属矿卷》研编的基础上,对中国碲矿资源特征和勘查开发利用现状进行了系统梳理和总结,提出中国碲矿以伴生矿为主,独立碲矿床仅1个(四川大水沟);已查明碲矿资源储量集中分布在广东、江西和甘肃,3省碲资源量占全国资源总量的93.08%;伴生大型、超大型碲矿(大宝山、城门山、金川和白家咀子)具有较大的成矿潜力和找矿空间;目前,中国碲工业发展仍处于初级阶段,开发利用严重依赖于寄主矿床。随着太阳能电池、航空航天等技术的快速发展,碲矿资源需求将逐步加大,碲资源供应缺口即将来临。为了确保中国乃至全球碲资源的可持续供应,中国应加大碲资源的勘查力度,提高碲矿的提取技术,从而提高自身的碲产量和供应能力,推动碲产业的发展,减少对外依赖。这不仅有助于保障国家经济发展的需要,也有利于加速中国在碲相关产业领域的技术进步和国际竞争力的提升。

光电催化矿物材料的制备及应用研究进展

光电催化技术是解决环境污染和能源短缺问题最具应用前景的方法之一。基于半导体矿物的光电化学性质或非半导体矿物的天然物理特性,将矿物与光电催化功能体复合构建的光电催化矿物材料具有成本低、环境相容性好、性能优异等特点,其在矿物利用的新兴领域受到了广泛关注。本文在限定了光电催化矿物材料研究是否属于矿物应用范畴的基础上,介绍了光电催化矿物材料包含的矿物组分及特征,提出了光电催化矿物材料的分类,并对光电催化矿物材料的制备方法及矿物增强光电催化活性的机制进行了讨论。最后,概述了光电催化矿物材料用于水中污染物治理、光电催化水分解产氢、CO_(2)能源化等领域的研究现状;指出应重点关注矿物本征光电属性、有效建立材料复合结构与效能的联系、明确材料矿物学属性影响光电催化的机制等问题,拓展光电催化矿物材料在新能源、化学品合成和矿物/微生物作用等领域的应用研究。

辽宁翁泉沟硼铁矿的选矿工艺矿物学研究

采用X射线衍射、镜下鉴定、扫描电镜、矿物参数自动分析系统、化学成分分析等研究了辽宁翁泉沟硼铁矿的化学成分、矿物组成及含量、主要矿物产出形式等,查明了各目的矿物之间的嵌布关系等特性,以及影响选矿效果的主要矿物学因素,并提出了相应的选矿方法。

粉煤灰矿化电厂烟气CO_(2)技术及关键科学问题

燃煤发电是我国能源安全的重要保障,但烟气中会排放大量CO_(2),同时,也会产生大量粉煤灰。利用粉煤灰矿化封存电厂烟气CO_(2),并将矿化产物进行综合利用,可达到大宗固废处置与CO_(2)长效封存的双重目的。目前,粉煤灰矿化电厂烟气CO_(2)技术仍存在矿化效率低、反应时间长、CO_(2)处理量小等不足,其对应的关键科学问题和技术瓶颈亟待解决。简要介绍了粉煤灰矿化烟气CO_(2)的基本原理,分析了不同反应条件对粉煤灰碱土金属离子浸出和CO_(2)矿化反应效率的影响机制,对比了CO_(2)直接矿化反应工艺、碱土金属预浸出工艺、CO_(2)预吸收工艺等3种流程的优缺点,提出了包含粉煤灰碱土金属离子高效浸出、CO_(2)矿化反应过程强化、粉煤灰矿化CO_(2)智能装备、矿化效果综合评价等方面的粉煤灰高效矿化烟气CO_(2)技术体系,总结了粉煤灰矿化CO_(2)产物的物理化学性质,提出了粉煤灰矿化CO_(2)产物高值化综合利用的构想。最后,凝练出了粉煤灰碱土金属离子快速浸出与CO_(2)高效矿化特性、粉煤灰矿化CO_(2)大型反应器中多相混合与反应规律、粉煤灰浆液矿化CO_(2)产物性质的调控机制等3个关键科学问题,指明了基础研究-关键技术与装备研发-工程应用全链条的攻关方向,为粉煤灰高效矿化烟气CO_(2)及产物综合利用提供了参考,对于双碳目标实现和固废综合利用具有重要意义。