目的为评价CEREC椅旁CAD/CAM系统制作的IPS e.max CAD玻璃陶瓷高嵌体应用于根管治疗后牙缺损病例的临床效果。方法选择42例根管治疗后牙,应用高嵌体的牙体预备方式,采用CEREC椅旁CAD/CAM修复系统和IPS e.max CAD玻璃陶瓷,即刻完成修复...目的为评价CEREC椅旁CAD/CAM系统制作的IPS e.max CAD玻璃陶瓷高嵌体应用于根管治疗后牙缺损病例的临床效果。方法选择42例根管治疗后牙,应用高嵌体的牙体预备方式,采用CEREC椅旁CAD/CAM修复系统和IPS e.max CAD玻璃陶瓷,即刻完成修复体并粘接;修复1年后复查,参照改良修正后的美国公众健康服务标准(US Public Health Service Criteria,USPHS),在修复体边缘染色、边缘继发龋、修复体边缘适合性、修复体崩瓷折裂或脱落、修复体颜色、牙龈健康状况、修复体邻接关系、患者满意度8个方面进行评价。结果修复体边缘染色C级病例1例,成功率97.6%;边缘继发龋C级病例1例,成功率97.6%;修复体邻接关系欠佳C级病例1例,成功率97.6%;在边缘适合性、修复体崩瓷折裂或脱落、修复体颜色、牙龈健康状况、患者满意方面表现优秀,成功率均为100%。结论椅旁CAD/CAM系统制作的IPS e.maxCAD高嵌体修复体在短期内可取得良好的修复效果。展开更多
随着片上系统(System on Chip,SoC)芯片规模与功能复杂度的膨胀,硬件加速器已成为大规模SoC的重要组成部分。为了缩短产品交付时间,有必要开发硬件加速器仿真模型,以在SoC设计初期支撑架构的探索与评估。在对硬件加速器的特点与建模需...随着片上系统(System on Chip,SoC)芯片规模与功能复杂度的膨胀,硬件加速器已成为大规模SoC的重要组成部分。为了缩短产品交付时间,有必要开发硬件加速器仿真模型,以在SoC设计初期支撑架构的探索与评估。在对硬件加速器的特点与建模需求进行分析的基础上,提出一种基于AXI验证IP(Verification IP,VIP)、SystemVerilog信箱和旗语的硬件加速器建模方法。该方法支持完备的总线协议特性,同时支持多个处理引擎的并行处理与乱序输出。以实际SoC项目中的通信基带加速器为例,对提出的建模方法进行介绍,并进行相应的系统级仿真与分析。所提出的建模方法可实现对硬件加速器总线行为的高效建模,能够有力支撑SoC验证以及系统架构评估,缩短项目的开发周期。展开更多
This paper presents a P2P VOD system based on RF-IPS algorithm, and this system consists of two parts, server-side and clients. We put emphasis on the piece selection module of server-side, and in this part we cite th...This paper presents a P2P VOD system based on RF-IPS algorithm, and this system consists of two parts, server-side and clients. We put emphasis on the piece selection module of server-side, and in this part we cite the RF-IPS algorithm proposed in the past. In the piece selection module, we also proposed a weighting function except the RF-IPS algorithm. Using this function we will find the best server peers effectively and quickly, it will enhance the performance of this system. We carry on experiments on RF-IPS algorithm, and the results show this algorithm is efficient. Overall, we believe that the RF-IPS algorithm is feasible to further improve system performance and provide a cost-effective P2P VOD service with acceptable user experience.展开更多
This paper presents a partition-based Design-for- Test （DFT） technique to reduce the power consumption during scan-based testing. This method is based on partitioning the chip into several independent scan domains. ...This paper presents a partition-based Design-for- Test （DFT） technique to reduce the power consumption during scan-based testing. This method is based on partitioning the chip into several independent scan domains. By enabling the scan domains alternatively, only a fraction of the entire chip will be active at the same time, leading to low power consumption during test. Therefore, it will significantly reduce the possibility of Electronic Migration and Overheating. In order to prevent the drop of fault coverage, wrappers on the boundaries between scan domains are employed. This paper also presents a detailed design flow based on Electronics Design Automation （EDA） tools from Synopsy~ to implement the proposed test structure. The proposed DFT method is experimented on a state-of-theart System-ou-chips （SOC）. The simulation results show a significant reduction in both average and peak power dissipation without sacrificing the fault coverage and test time. This SOC has been taped out in TSMC and finished the final test m ADVANTEST.展开更多
The large larch beetle,Ips cembrae,is a significant pest causing the death of larch.In 2020,the attack density of I.cembrae on larch trap trees and standing trees was evaluated using sample sections placed along the t...The large larch beetle,Ips cembrae,is a significant pest causing the death of larch.In 2020,the attack density of I.cembrae on larch trap trees and standing trees was evaluated using sample sections placed along the trunk.As a defensive measure against I.cembrae,trap trees were highly effective in both spring and summer.The attack density increased with increasing trap tree surface area/volume.Galleries were established evenly throughout the entire trunk including the thin upper portion.When the number of trap trees was low and their capacity full,a continual aggregation of adults occurred due to pheromone communication,leading to attacks on healthy standing trees in the immediate vicinity.It was found that I.cembrae attacked standing trees from the trunk base,with a continual colonization of the stem up to 70%of the tree height in a time-differentiated progression of development stages.The attack density of I.cembrae on standing trees was up to 40%lower than on the trap trees.展开更多
文摘目的为评价CEREC椅旁CAD/CAM系统制作的IPS e.max CAD玻璃陶瓷高嵌体应用于根管治疗后牙缺损病例的临床效果。方法选择42例根管治疗后牙,应用高嵌体的牙体预备方式,采用CEREC椅旁CAD/CAM修复系统和IPS e.max CAD玻璃陶瓷,即刻完成修复体并粘接;修复1年后复查,参照改良修正后的美国公众健康服务标准(US Public Health Service Criteria,USPHS),在修复体边缘染色、边缘继发龋、修复体边缘适合性、修复体崩瓷折裂或脱落、修复体颜色、牙龈健康状况、修复体邻接关系、患者满意度8个方面进行评价。结果修复体边缘染色C级病例1例,成功率97.6%;边缘继发龋C级病例1例,成功率97.6%;修复体邻接关系欠佳C级病例1例,成功率97.6%;在边缘适合性、修复体崩瓷折裂或脱落、修复体颜色、牙龈健康状况、患者满意方面表现优秀,成功率均为100%。结论椅旁CAD/CAM系统制作的IPS e.maxCAD高嵌体修复体在短期内可取得良好的修复效果。
文摘随着片上系统(System on Chip,SoC)芯片规模与功能复杂度的膨胀,硬件加速器已成为大规模SoC的重要组成部分。为了缩短产品交付时间,有必要开发硬件加速器仿真模型,以在SoC设计初期支撑架构的探索与评估。在对硬件加速器的特点与建模需求进行分析的基础上,提出一种基于AXI验证IP(Verification IP,VIP)、SystemVerilog信箱和旗语的硬件加速器建模方法。该方法支持完备的总线协议特性,同时支持多个处理引擎的并行处理与乱序输出。以实际SoC项目中的通信基带加速器为例,对提出的建模方法进行介绍,并进行相应的系统级仿真与分析。所提出的建模方法可实现对硬件加速器总线行为的高效建模,能够有力支撑SoC验证以及系统架构评估,缩短项目的开发周期。
文摘This paper presents a P2P VOD system based on RF-IPS algorithm, and this system consists of two parts, server-side and clients. We put emphasis on the piece selection module of server-side, and in this part we cite the RF-IPS algorithm proposed in the past. In the piece selection module, we also proposed a weighting function except the RF-IPS algorithm. Using this function we will find the best server peers effectively and quickly, it will enhance the performance of this system. We carry on experiments on RF-IPS algorithm, and the results show this algorithm is efficient. Overall, we believe that the RF-IPS algorithm is feasible to further improve system performance and provide a cost-effective P2P VOD service with acceptable user experience.
文摘This paper presents a partition-based Design-for- Test （DFT） technique to reduce the power consumption during scan-based testing. This method is based on partitioning the chip into several independent scan domains. By enabling the scan domains alternatively, only a fraction of the entire chip will be active at the same time, leading to low power consumption during test. Therefore, it will significantly reduce the possibility of Electronic Migration and Overheating. In order to prevent the drop of fault coverage, wrappers on the boundaries between scan domains are employed. This paper also presents a detailed design flow based on Electronics Design Automation （EDA） tools from Synopsy~ to implement the proposed test structure. The proposed DFT method is experimented on a state-of-theart System-ou-chips （SOC）. The simulation results show a significant reduction in both average and peak power dissipation without sacrificing the fault coverage and test time. This SOC has been taped out in TSMC and finished the final test m ADVANTEST.
基金supported by Ministry of Agriculture of the Czech Republic in grant[QK1920433].“Influence of protective measuresagainst the populations of bark beetles according to population density”。
文摘The large larch beetle,Ips cembrae,is a significant pest causing the death of larch.In 2020,the attack density of I.cembrae on larch trap trees and standing trees was evaluated using sample sections placed along the trunk.As a defensive measure against I.cembrae,trap trees were highly effective in both spring and summer.The attack density increased with increasing trap tree surface area/volume.Galleries were established evenly throughout the entire trunk including the thin upper portion.When the number of trap trees was low and their capacity full,a continual aggregation of adults occurred due to pheromone communication,leading to attacks on healthy standing trees in the immediate vicinity.It was found that I.cembrae attacked standing trees from the trunk base,with a continual colonization of the stem up to 70%of the tree height in a time-differentiated progression of development stages.The attack density of I.cembrae on standing trees was up to 40%lower than on the trap trees.
