针对风火打捆(wind-thermal-bundled,WTB)系统在受到干扰时可能由于阻尼不足而出现的低频振荡现象以及较高的网损会导致运行成本的增加和阻碍“双碳”目标实现的问题,提出了一种电力系统稳定器(power system stabilizer,PSS)与统一潮流...针对风火打捆(wind-thermal-bundled,WTB)系统在受到干扰时可能由于阻尼不足而出现的低频振荡现象以及较高的网损会导致运行成本的增加和阻碍“双碳”目标实现的问题,提出了一种电力系统稳定器(power system stabilizer,PSS)与统一潮流控制器(unified power flow controller,UPFC)附加功率振荡阻尼控制器(power oscillation damping,POD)参数和UPFC安装位置协调优化策略方法。首先,基于Matlab构建了风火打捆外送系统和控制器模型。然后,利用多目标樽海鞘优化算法(multi-objective salp swarm algorithm,MSSA),将协调优化问题转化为多目标优化问题。目标函数设计中考虑了UPFC装置的调节特性。最后,采用IEEE 4机2区系统和16机5区系统进行多种工况下的仿真。仿真结果显示,协调优化后的控制器可以提高系统阻尼,维持发电机转速的稳定,抑制低频振荡引起的系统有功、电压等的波动,同时降低了系统的有功网损,提高了系统稳定性和运行经济性。MSSA在工程问题上的应用得到了补充。展开更多
随着国产机组出口到“一带一路”国家,励磁系统建模和电力系统稳定器(power system stabilizer, PSS)试验在海外项目开展起来,对不同仿真软件建模提出了相关要求。对海外某300 MW机组基于ETAP软件进行励磁系统建模试验,与空载试验对比,...随着国产机组出口到“一带一路”国家,励磁系统建模和电力系统稳定器(power system stabilizer, PSS)试验在海外项目开展起来,对不同仿真软件建模提出了相关要求。对海外某300 MW机组基于ETAP软件进行励磁系统建模试验,与空载试验对比,验证模型正确性。PSS参数整定主要利用Matlab完成,计算励磁系无补偿特性,进行PSS参数整定,利用根轨迹方法确认PSS的临界增益,最终完成ETAP励磁系统模型及PSS参数计算。展开更多
Because poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate)(PEDOT:PSS)is water processable,thermally stable,and highly conductive,PEDOT:PSS and its composites have been considered to be one of the most promising f...Because poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate)(PEDOT:PSS)is water processable,thermally stable,and highly conductive,PEDOT:PSS and its composites have been considered to be one of the most promising flexible thermoelectric materials.However,the PEDOT:PSS film prepared from its commercial aqueous dispersion usually has very low conductivity,thus cannot be directly utilized for TE applications.Here,a simple environmental friendly strategy via femtosecond laser irradiation without any chemical dopants and treatments was demonstrated.Under optimal conditions,the electrical conductivity of the treated film is increased to 803.1 S cm^(-1)from 1.2 S cm^(-1)around three order of magnitude higher,and the power factor is improved to 19.0μW m^(-1)K^(-2),which is enhanced more than 200 times.The mechanism for such remarkable enhancement was attributed to the transition of the PEDOT chains from a coil to a linear or expanded coil conformation,reduction of the interplanar stacking distance,and the removal of insulating PSS with increasing the oxidation level of PEDOT,facilitating the charge transportation.This work presents an effective route for fabricating high-performance flexible conductive polymer films and wearable thermoelectric devices.展开更多
文摘随着国产机组出口到“一带一路”国家,励磁系统建模和电力系统稳定器(power system stabilizer, PSS)试验在海外项目开展起来,对不同仿真软件建模提出了相关要求。对海外某300 MW机组基于ETAP软件进行励磁系统建模试验,与空载试验对比,验证模型正确性。PSS参数整定主要利用Matlab完成,计算励磁系无补偿特性,进行PSS参数整定,利用根轨迹方法确认PSS的临界增益,最终完成ETAP励磁系统模型及PSS参数计算。
基金supported by the National Key Research and Development Program of China(2020YFA0715000)the Guangdong Basic and Applied Basic Research Foundation(2020A1515110250,2021B1515120041)+1 种基金the Foshan Xianhu Laboratory of the Advanced Energy Science and Technology Guangdong Laboratory(XHT2020-005)the Fundamental Research Funds for the Central Universities(2020IVA068,2021lll007JC)
文摘Because poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate)(PEDOT:PSS)is water processable,thermally stable,and highly conductive,PEDOT:PSS and its composites have been considered to be one of the most promising flexible thermoelectric materials.However,the PEDOT:PSS film prepared from its commercial aqueous dispersion usually has very low conductivity,thus cannot be directly utilized for TE applications.Here,a simple environmental friendly strategy via femtosecond laser irradiation without any chemical dopants and treatments was demonstrated.Under optimal conditions,the electrical conductivity of the treated film is increased to 803.1 S cm^(-1)from 1.2 S cm^(-1)around three order of magnitude higher,and the power factor is improved to 19.0μW m^(-1)K^(-2),which is enhanced more than 200 times.The mechanism for such remarkable enhancement was attributed to the transition of the PEDOT chains from a coil to a linear or expanded coil conformation,reduction of the interplanar stacking distance,and the removal of insulating PSS with increasing the oxidation level of PEDOT,facilitating the charge transportation.This work presents an effective route for fabricating high-performance flexible conductive polymer films and wearable thermoelectric devices.
