Considering its structural features, geometric shapes, service mode, environmental media, mechanical behavior, etc, the special nature and complexity of tailings dam were summarized. The technical approach to safety m...Considering its structural features, geometric shapes, service mode, environmental media, mechanical behavior, etc, the special nature and complexity of tailings dam were summarized. The technical approach to safety management for tailings dam was proposed, which is the on-line automated monitoring and early warning information. The results show that a strong theoretical basis can be provided for security monitoring and security management of tailings dam. Online automated monitoring system for tailings dam has full implementation of the information. It is applied widely in Lingnan gold mine, Xiadian gold mine and Hedong gold mine in Zhaoyuan, Shandong Province, and achieves good effect.展开更多
An automatic monitoring technique of the seepage line, including the monitoring design, the automatic monitoring system and the backfill technique of the measuring probe of pore-water pressure, was used in a tailings ...An automatic monitoring technique of the seepage line, including the monitoring design, the automatic monitoring system and the backfill technique of the measuring probe of pore-water pressure, was used in a tailings dam, and a shallow refractive seismic method was investigated for obtaining the seepage line of those areas outside the monitoring zone. The results show that the automatic monitoring has the error within ±3% relative to piezometric tube method and improves monitoring efficiency greatly, and the shallow refractive seismic method has the error within ±10% but expands the area of monitoring. Both of them can be used for a daily measurement in monitoring the seepage line. The result of the automatic monitoring also shows that not only the design of the survey line and the backfill technique of the measuring probe of pore-water pressure are reasonable and economic but also the reliability and safety of the automatic monitoring system are better. Testing result by the shallow refractive seismic method in tailings reveals that the energy excited by hammering iron sheet-pole is strong enough and safe, and that the character of anti-jamming by the detectors with long tailcone is better.展开更多
In order to optimize monitoring points and monitoring factor, the relationshipbetween pollutants and soil sample were established by correspondence analysis.Thestudy results show that the reflecting monitoring points ...In order to optimize monitoring points and monitoring factor, the relationshipbetween pollutants and soil sample were established by correspondence analysis.Thestudy results show that the reflecting monitoring points and monitoring factors in thegraphic on the same factor axis can clearly express the intrinsic link between pollutantsand monitoring points and distribution characteristics.To determine the main monitoringpoint and the main monitoring indicators can reduce and optimize the number of monitoringpoints under the premise of ensuring the typical and representative of monitoring data.Using the correlation of pollutants can reduce the number of monitoring indicators and improvethe effectiveness of data collection.展开更多
基金Projects(50874064,50804026,50904039)supported by the National Natural Science Foundation of ChinaProject(200804290002)supported by Research Fund for the Doctoral Program of Higher Education of ChinaProject(G2010F10)supported by S&T Plan Project from Shandong Provincial Education Department
文摘Considering its structural features, geometric shapes, service mode, environmental media, mechanical behavior, etc, the special nature and complexity of tailings dam were summarized. The technical approach to safety management for tailings dam was proposed, which is the on-line automated monitoring and early warning information. The results show that a strong theoretical basis can be provided for security monitoring and security management of tailings dam. Online automated monitoring system for tailings dam has full implementation of the information. It is applied widely in Lingnan gold mine, Xiadian gold mine and Hedong gold mine in Zhaoyuan, Shandong Province, and achieves good effect.
文摘An automatic monitoring technique of the seepage line, including the monitoring design, the automatic monitoring system and the backfill technique of the measuring probe of pore-water pressure, was used in a tailings dam, and a shallow refractive seismic method was investigated for obtaining the seepage line of those areas outside the monitoring zone. The results show that the automatic monitoring has the error within ±3% relative to piezometric tube method and improves monitoring efficiency greatly, and the shallow refractive seismic method has the error within ±10% but expands the area of monitoring. Both of them can be used for a daily measurement in monitoring the seepage line. The result of the automatic monitoring also shows that not only the design of the survey line and the backfill technique of the measuring probe of pore-water pressure are reasonable and economic but also the reliability and safety of the automatic monitoring system are better. Testing result by the shallow refractive seismic method in tailings reveals that the energy excited by hammering iron sheet-pole is strong enough and safe, and that the character of anti-jamming by the detectors with long tailcone is better.
基金Supported by the Public Welfare Research Program of State Environmental Protection Administration(200909065)
文摘In order to optimize monitoring points and monitoring factor, the relationshipbetween pollutants and soil sample were established by correspondence analysis.Thestudy results show that the reflecting monitoring points and monitoring factors in thegraphic on the same factor axis can clearly express the intrinsic link between pollutantsand monitoring points and distribution characteristics.To determine the main monitoringpoint and the main monitoring indicators can reduce and optimize the number of monitoringpoints under the premise of ensuring the typical and representative of monitoring data.Using the correlation of pollutants can reduce the number of monitoring indicators and improvethe effectiveness of data collection.
