The underwater tapping machine is composed of a center bit, a tapping cutter, a seal box, a main drive box, a boring bar assembly, a envelop, a gear case, a counter and so on. The drive system in underwater tapping ma...The underwater tapping machine is composed of a center bit, a tapping cutter, a seal box, a main drive box, a boring bar assembly, a envelop, a gear case, a counter and so on. The drive system in underwater tapping machine consists of a worm drive, a gear drive system and a screw drive. The worm drive is in the main drive box. The worm is connected with a hydraulic motor and driven by the hydraulic motor. The gear drive system is a combined gear train which is the combinations of the fixed axes and differential gear train in the gear case. On the one hand, by means of the fixed axes gear trains the turn and power of transmission shaft are transferred to the boring bar and the screw rod, causing differential turn between the boring bar and the screw rod. On the other hand, the turns of the boring bar and the screw rod are transferred to the differential gear train. The differential gear train is used to drive a special counter to count axial travel of the boring bar. The screw drive is composed of a feed screw and a nut on the boring bar. There is the differential turn between the boring bar and the feed screw. By means of the nut, the boring bar can feed automatically. With the movement of the sliding gear 7 in the gear case, the designed drive system can also be provided with the ability of fast forward and fast backward movement of the boring bar in its idle motion, resulting in the increase of the tapping efficiency.展开更多
At present, an automatic-mechanic contact tap-changer is widely used in power system, but it can not frequently operate. In addition, arc will occur when the switch changes. In order to solve these two problems, this ...At present, an automatic-mechanic contact tap-changer is widely used in power system, but it can not frequently operate. In addition, arc will occur when the switch changes. In order to solve these two problems, this paper presented an automatic on-load voltage-regulating distributing transformer which employed non-contact solid-state relay as tap-changer, and mainly introduced its structure, basic principal, design method of each key link and experimental results. Laboratory simulation experiments informed that the scheme was feasible. It was a smooth and effective experiment device, which was practical in application.展开更多
基金supported by the National High Technology Research and Development Program of China(863 Program, Grant No.2002AA602012-2)
文摘The underwater tapping machine is composed of a center bit, a tapping cutter, a seal box, a main drive box, a boring bar assembly, a envelop, a gear case, a counter and so on. The drive system in underwater tapping machine consists of a worm drive, a gear drive system and a screw drive. The worm drive is in the main drive box. The worm is connected with a hydraulic motor and driven by the hydraulic motor. The gear drive system is a combined gear train which is the combinations of the fixed axes and differential gear train in the gear case. On the one hand, by means of the fixed axes gear trains the turn and power of transmission shaft are transferred to the boring bar and the screw rod, causing differential turn between the boring bar and the screw rod. On the other hand, the turns of the boring bar and the screw rod are transferred to the differential gear train. The differential gear train is used to drive a special counter to count axial travel of the boring bar. The screw drive is composed of a feed screw and a nut on the boring bar. There is the differential turn between the boring bar and the feed screw. By means of the nut, the boring bar can feed automatically. With the movement of the sliding gear 7 in the gear case, the designed drive system can also be provided with the ability of fast forward and fast backward movement of the boring bar in its idle motion, resulting in the increase of the tapping efficiency.
文摘At present, an automatic-mechanic contact tap-changer is widely used in power system, but it can not frequently operate. In addition, arc will occur when the switch changes. In order to solve these two problems, this paper presented an automatic on-load voltage-regulating distributing transformer which employed non-contact solid-state relay as tap-changer, and mainly introduced its structure, basic principal, design method of each key link and experimental results. Laboratory simulation experiments informed that the scheme was feasible. It was a smooth and effective experiment device, which was practical in application.
