为避免产品族造型设计过程中目标特征定位模糊导致的用户群需求冲突问题,提出了一种产品族关键造型要素提取与差异化定位方法(Key Modelling Element Extraction and Differentiated Positioning Method,KMEE-DPM)。通过因子分析法提取...为避免产品族造型设计过程中目标特征定位模糊导致的用户群需求冲突问题,提出了一种产品族关键造型要素提取与差异化定位方法(Key Modelling Element Extraction and Differentiated Positioning Method,KMEE-DPM)。通过因子分析法提取了产品族感性意象因子;采用全局HIEs法获取了产品族造型设计要素及设计特征;基于数量化理论Ⅰ分析感性意象与设计特征间的映射关系,结合感性需求分析确定产品族造型设计的目标特征;用k-means算法解耦目标特征,基于解耦结果提取关键设计要素并得出其应用策略,实现目标特征的差异化定位。以城郊多用途汽车(Suburban Utility Vehicle,SUV)内饰造型设计为例进行验证,KMEE-DPM能有效提取SUV产品族内饰造型的关键设计要素并实现差异化设计定位,同时输出的设计方案能够满足目标用户群的个性化需求和多用户群的共性需求,有效避免了用户群需求冲突问题,证明了KMEE-DPM具有一定的实用性和有效性。展开更多
Objective This study was conducted to evaluate the concentration of potentially toxic elements(PTEs)such as arsenic(As),cadmium(Cd),mercury(Hg),and lead(Pb)in fruit samples collected from Markazi Province,Iran.A proba...Objective This study was conducted to evaluate the concentration of potentially toxic elements(PTEs)such as arsenic(As),cadmium(Cd),mercury(Hg),and lead(Pb)in fruit samples collected from Markazi Province,Iran.A probabilistic health risk assessment due to ingestion of PTEs through the consumption of these fruits was also conducted.Methods The concentration of PTEs in 90 samples of five types of fruits(n=3)collected from six geographic regions in Markazi Province was measured.The potential health risk was evaluated using a Monte Carlo simulation model.Results A significant difference was observed in the concentration of PTEs between fruits as well as soil and water samples collected from different regions in Markazi Province.The order of PTE concentration in the soil and water samples was as follows:Pb>As>Hg>Cd.Furthermore,the highest level of transfer factor for Cd and Hg correlated with the grape.The estimated daily intake for adults and children was lower than the recommended tolerable daily intake.Conclusion The population in Markazi Province,Iran,is not at considerable noncarcinogenic or carcinogenic risk due to the ingestion of PTEs through the consumption of the examined fruits.展开更多
By applying the 'theory of synchronization' from the science of complexity to studying the regional regularity of ore formation within the Nanling region of southern China, a characteristic targetpattern regional or...By applying the 'theory of synchronization' from the science of complexity to studying the regional regularity of ore formation within the Nanling region of southern China, a characteristic targetpattern regional ore zonality has been discovered. During the early and late Yanshanian epoch (corresponding respectively to the Jurassic and Cretaceous periods), two centers of ore formation emerged successively in the Nanling region; the former is mainly for rare metals (W, Sn, Mo, Bi, Nb) and one rare-earth element (La) and was generated in the Jurassic period; whereas the latter is mainly for base metals (Cu, Pb, Zn, Sb, Hg), noble metals (Au, Ag), and one radioactive element (U) and was generated in the Cretaceous period. Centers of ore formation were brought about by interface dynamics respectively at the Qitianling and Jiuyishan districts in southern Hunan Province. The characteristic giant nonlinear target-pattern regional ore zonality was generated by spatio-temporal synchronization process of the Nanling complex metallogenic system. It induced the collective dynamics and cooperative behavior of the system and displayed the configuration of the regional ore zonality. Then dynamical clustering transformed the configuration into rudimentary ordered coherent structures. Phase dynamics eventually defined the spatio-temporal structures of the target-pattern regional ore zonality and determined their localization and distribution. A new methodology for revealing regional ore zonality is developed, which will encourage further investigation of the formation of deep-seated ore resources and the onset of large-scale mineralization.展开更多
During the discharging of Tokamak devices, interactions between the core plasma and plasma-facing components (PFCs) may cause exorbitant heat deposition in the latter. This poses a grave threat to the lifetimes of PFC...During the discharging of Tokamak devices, interactions between the core plasma and plasma-facing components (PFCs) may cause exorbitant heat deposition in the latter. This poses a grave threat to the lifetimes of PFCs materials. An infrared (IR) diagnostic system consisting of an IR camera and an endoscope was installed on an Experimental Advanced Superconducting Tokamak (EAST) to monitor the surface temperature of the lower divertor target plate (LDTP) and to calculate the corresponding heat flux based on its surface temperature and physical structure, via the finite element method. First, the temperature obtained by the IR camera was calibrated against the temperature measured by the built-in thermocouple of EAST under baking conditions to determine the true temperature of the LDTP. Next, based on the finite element method, a target plate model was built and a discretization of the modeling domain was carried out. Then, a heat conduction equation and boundary conditions were determined. Finally, the heat flux was calculated. The new numerical tool provided results similar to those for DFLUX;this is important for future work on related physical processes and heat flux control.展开更多
Marinov et al. have detected spontaneous fission events in sources separated from tungsten targets irradiated with 24 GeV protons. These fission events could not be attributed to actinides or to any other known isotop...Marinov et al. have detected spontaneous fission events in sources separated from tungsten targets irradiated with 24 GeV protons. These fission events could not be attributed to actinides or to any other known isotope. Marinov et al. propose that fission events are due to production of element 112 (Eka-Hg) in the tungsten target. We have addressed Marinov’s claim with a new analysis of their data and modern theoretical model calculations of possible interactions. Using data available in the literature the spontaneous fission half-life of the Eka-Hg was estimated to be ~74 days. This is dramatically longer than the half-life obtained for 283112Cn, produced in the fusion of energetic 48Ca ions with 238U. Monte Carlo calculations show that enough Sr isotopes are produced in the tungsten target to make the production of element 112 via fusion of Sr and W feasible;however, if such fusion was possible it had to be deep sub-barrier fusion.展开更多
文摘为避免产品族造型设计过程中目标特征定位模糊导致的用户群需求冲突问题,提出了一种产品族关键造型要素提取与差异化定位方法(Key Modelling Element Extraction and Differentiated Positioning Method,KMEE-DPM)。通过因子分析法提取了产品族感性意象因子;采用全局HIEs法获取了产品族造型设计要素及设计特征;基于数量化理论Ⅰ分析感性意象与设计特征间的映射关系,结合感性需求分析确定产品族造型设计的目标特征;用k-means算法解耦目标特征,基于解耦结果提取关键设计要素并得出其应用策略,实现目标特征的差异化定位。以城郊多用途汽车(Suburban Utility Vehicle,SUV)内饰造型设计为例进行验证,KMEE-DPM能有效提取SUV产品族内饰造型的关键设计要素并实现差异化设计定位,同时输出的设计方案能够满足目标用户群的个性化需求和多用户群的共性需求,有效避免了用户群需求冲突问题,证明了KMEE-DPM具有一定的实用性和有效性。
基金supported by the Payame Noor University (PNU), Tehran, Iran
文摘Objective This study was conducted to evaluate the concentration of potentially toxic elements(PTEs)such as arsenic(As),cadmium(Cd),mercury(Hg),and lead(Pb)in fruit samples collected from Markazi Province,Iran.A probabilistic health risk assessment due to ingestion of PTEs through the consumption of these fruits was also conducted.Methods The concentration of PTEs in 90 samples of five types of fruits(n=3)collected from six geographic regions in Markazi Province was measured.The potential health risk was evaluated using a Monte Carlo simulation model.Results A significant difference was observed in the concentration of PTEs between fruits as well as soil and water samples collected from different regions in Markazi Province.The order of PTE concentration in the soil and water samples was as follows:Pb>As>Hg>Cd.Furthermore,the highest level of transfer factor for Cd and Hg correlated with the grape.The estimated daily intake for adults and children was lower than the recommended tolerable daily intake.Conclusion The population in Markazi Province,Iran,is not at considerable noncarcinogenic or carcinogenic risk due to the ingestion of PTEs through the consumption of the examined fruits.
基金supported by China Geological Survey Grants No. 1212010561603(2005)
文摘By applying the 'theory of synchronization' from the science of complexity to studying the regional regularity of ore formation within the Nanling region of southern China, a characteristic targetpattern regional ore zonality has been discovered. During the early and late Yanshanian epoch (corresponding respectively to the Jurassic and Cretaceous periods), two centers of ore formation emerged successively in the Nanling region; the former is mainly for rare metals (W, Sn, Mo, Bi, Nb) and one rare-earth element (La) and was generated in the Jurassic period; whereas the latter is mainly for base metals (Cu, Pb, Zn, Sb, Hg), noble metals (Au, Ag), and one radioactive element (U) and was generated in the Cretaceous period. Centers of ore formation were brought about by interface dynamics respectively at the Qitianling and Jiuyishan districts in southern Hunan Province. The characteristic giant nonlinear target-pattern regional ore zonality was generated by spatio-temporal synchronization process of the Nanling complex metallogenic system. It induced the collective dynamics and cooperative behavior of the system and displayed the configuration of the regional ore zonality. Then dynamical clustering transformed the configuration into rudimentary ordered coherent structures. Phase dynamics eventually defined the spatio-temporal structures of the target-pattern regional ore zonality and determined their localization and distribution. A new methodology for revealing regional ore zonality is developed, which will encourage further investigation of the formation of deep-seated ore resources and the onset of large-scale mineralization.
基金supported by the National Natural Science Foundation of China(Nos.51505120 and 11105028)the National Magnetic Confinement Fusion Science Program of China(No.2015GB102004)
文摘During the discharging of Tokamak devices, interactions between the core plasma and plasma-facing components (PFCs) may cause exorbitant heat deposition in the latter. This poses a grave threat to the lifetimes of PFCs materials. An infrared (IR) diagnostic system consisting of an IR camera and an endoscope was installed on an Experimental Advanced Superconducting Tokamak (EAST) to monitor the surface temperature of the lower divertor target plate (LDTP) and to calculate the corresponding heat flux based on its surface temperature and physical structure, via the finite element method. First, the temperature obtained by the IR camera was calibrated against the temperature measured by the built-in thermocouple of EAST under baking conditions to determine the true temperature of the LDTP. Next, based on the finite element method, a target plate model was built and a discretization of the modeling domain was carried out. Then, a heat conduction equation and boundary conditions were determined. Finally, the heat flux was calculated. The new numerical tool provided results similar to those for DFLUX;this is important for future work on related physical processes and heat flux control.
文摘Marinov et al. have detected spontaneous fission events in sources separated from tungsten targets irradiated with 24 GeV protons. These fission events could not be attributed to actinides or to any other known isotope. Marinov et al. propose that fission events are due to production of element 112 (Eka-Hg) in the tungsten target. We have addressed Marinov’s claim with a new analysis of their data and modern theoretical model calculations of possible interactions. Using data available in the literature the spontaneous fission half-life of the Eka-Hg was estimated to be ~74 days. This is dramatically longer than the half-life obtained for 283112Cn, produced in the fusion of energetic 48Ca ions with 238U. Monte Carlo calculations show that enough Sr isotopes are produced in the tungsten target to make the production of element 112 via fusion of Sr and W feasible;however, if such fusion was possible it had to be deep sub-barrier fusion.