The dynamic fracture behavior of a new near-beta Ti-5Al-5Mo-5V-3Cr-1Fe（Ti-5553）alloy under a high strain rate loading was investigated systemically using the Taylor impact test,over the impact velocity ranging from1...The dynamic fracture behavior of a new near-beta Ti-5Al-5Mo-5V-3Cr-1Fe（Ti-5553）alloy under a high strain rate loading was investigated systemically using the Taylor impact test,over the impact velocity ranging from156 ms-1 to 256 ms-1.An optical microscope（OM）and a scanning electron microscope（SEM）were used to characterize the microstructure evolution.The experimental results have demonstrated that the velocity from deformation to fracture is 256 ms-1 for the alloy with anα＋βduplex microstructure including more primaryαphase,while the velocity is 234 ms-1 for the alloy with a duplex microstructure including less primaryα phase.From the impact fracture morphologies,smooth and smeared surfaces and ductile dimple areas can be observed.The failure mode of the titanium alloy with both microstructures is adiabatic shear banding.According to the fracture analysis,the ductile fracture area with the dimple area in the alloy with much more primaryαphase were more than that with less primaryαphase.Compared to the duplex microstructure with less primaryα phase,Ti-5553 alloy with more primaryαphase exhibited a better capability to resist an adiabatic shear damage.展开更多
The thin aluminum liners with an aspect ratio R/?r 1 have been imploded on the primary test stand(PTS) facility,where R is the outer radius of the liner and ?r is the thickness. The x-ray self-emission images present ...The thin aluminum liners with an aspect ratio R/?r 1 have been imploded on the primary test stand(PTS) facility,where R is the outer radius of the liner and ?r is the thickness. The x-ray self-emission images present azimuthally correlated perturbations in the liner implosions. The experiments show that at-10 ns before the stagnation, the wavelengths of perturbation are about 0.93 mm and 1.67 mm for the small-radius and large-radius liners, respectively. We have utilized the resistive magnetohydrodynamic code PLUTO to study the development of magneto-Rayleigh–Taylor(MRT) instabilities under experimental conditions. The calculated perturbation amplitudes are consistent with the experimental observations very well. We have found that both mode coupling and long implosion distance are responsible for the more developed instabilities in the large-radius liner implosions.展开更多
文摘The dynamic fracture behavior of a new near-beta Ti-5Al-5Mo-5V-3Cr-1Fe（Ti-5553）alloy under a high strain rate loading was investigated systemically using the Taylor impact test,over the impact velocity ranging from156 ms-1 to 256 ms-1.An optical microscope（OM）and a scanning electron microscope（SEM）were used to characterize the microstructure evolution.The experimental results have demonstrated that the velocity from deformation to fracture is 256 ms-1 for the alloy with anα＋βduplex microstructure including more primaryαphase,while the velocity is 234 ms-1 for the alloy with a duplex microstructure including less primaryα phase.From the impact fracture morphologies,smooth and smeared surfaces and ductile dimple areas can be observed.The failure mode of the titanium alloy with both microstructures is adiabatic shear banding.According to the fracture analysis,the ductile fracture area with the dimple area in the alloy with much more primaryαphase were more than that with less primaryαphase.Compared to the duplex microstructure with less primaryα phase,Ti-5553 alloy with more primaryαphase exhibited a better capability to resist an adiabatic shear damage.
基金supported by the National Natural Science Foundation of China(Grant Nos.11605013,11775032,11805019,and 11705013)
文摘The thin aluminum liners with an aspect ratio R/?r 1 have been imploded on the primary test stand(PTS) facility,where R is the outer radius of the liner and ?r is the thickness. The x-ray self-emission images present azimuthally correlated perturbations in the liner implosions. The experiments show that at-10 ns before the stagnation, the wavelengths of perturbation are about 0.93 mm and 1.67 mm for the small-radius and large-radius liners, respectively. We have utilized the resistive magnetohydrodynamic code PLUTO to study the development of magneto-Rayleigh–Taylor(MRT) instabilities under experimental conditions. The calculated perturbation amplitudes are consistent with the experimental observations very well. We have found that both mode coupling and long implosion distance are responsible for the more developed instabilities in the large-radius liner implosions.
