Stress Measurement with an Improved Hollow Inclusion Technique In Jinchuan Nickel Mine

Borehole overcoring stress measurement with an improved hollow inclusion technique was carried out at 10 points on 3 levels in Jinchuan nickel mine which is situated in north-west of China. Through the measurement, 3-D in situ stress state at the measuring points and distribution characteristics of the stress field in the mine were obtained. The stress state in Jinchuan mine is dominated by the horizontal tectonic stress field. The maximum principal stress is horizontal which is about twice the weight of the overburden and its orientation is approximately vertical to the regional tectonic line. The difference between two horizontal principal stresses is quite large which is an important reason to cause failure of underground excavations.

Techniques for in-situ stress measurement at great depth

Reliable information of in--situ stress state is necessary for the design andconstruction of most important rock projects. As most rock projects are getting deeper and deeper,traditional techniques of in--situ stress measurement are not very suitable. The current techniquesof in--situ stress measurement and their insufficiency for use at great depth are analyzed. Somebasic ideas of the development of new techniques and the improvement of current techniques for useat great depth are provided.

Corrosion Measurements of Reinforcing Steel by Different Electrochemical Techniques

Electrochemical techniques of the corrosion measurements of reinforcing steeI in concrete have been evaluated. These techniques include half-cell potential measurements, impressed voltage method, impressed current method and potentiostatic polarization technique. The results of corrosion behaviour of the steel in both 5%NaCl and 5%MgSO4 show that each electrochemical technique provides some information about the condition of the steel bar or the corrosivity of the environment being evaluated, yet none provides a complete data regarding the corrosion resistance of reinforcing steel in aggressive media

Measurement of Concentration Distribution of Electrogenerated Etchant Using an Electrochemical Probe Technique

An electrochemical probe measurement system for detecting an electrogenerated etchant in solution is developed.Concentration distribution of electrogenerated etchant bromine as close as 8 micrometer to the surface of macrodisk is studied quantitatively.

Techniques trend analysis of propagating laser beam quality measurement

Different methods of measuring a propagating laser beam quality are summarized.The disadvantages in traditional way in measuring a laser beam quality is analyzed and the insufficiencies of the Shack-Hartmannin method which is commonly using wave front technique at present is pointed out.Finally,the transmission intensity equation based(TIE-based)measuring way in a laser beam quality evaluation and the corresponding advantages are discussed,which is believed to be a deve-l oping trend in laser beam evaluation.

Liquid Level Measurement in Oil Tanks Based on Double-differential Pressure Technique

The system principle and configuration of the double differential pressure method for measuring oil tank level are presented. The fundamental method and circuit of fiber optic transmission are analyzed .The accuracy and security of level measurement in the oil tanks have been greatly improved.

Atmospheric NO_2 Concentration Measurements Using Differential Absorption Lidar Technique

Using the Differential Absorption Lidar (DIAL) technique, two types of approaches, namely, reflection from retroreflector / topographic target and backscatter from atmosphere, are available for studying remotely the atmospheric NO, concentration. The Argon ion lidar system at the Indian Institute of Tropical Meteorology (IITM), Pune, India has been used for the measurements by following both the path-averaged and range-resolved approaches. For the former, a topographic target (hill) is used for determining path-averaged surface concentration. In the latter, spectral properties of atmospheric attenuation is used for making range-resolved measurements in the surface layer. The results of the observations collected by following both approaches are presented. The average surface NO2 concentration was found to vary between 0.01 and 0.105 ppm and the range-resolved measurements exhibited higher values suggesting treatment of the lidar data for scattering and extinction effects due to atmospheric aerosols and air molecules, and atmospheric turbulence. Certain modifications that are suggested to the experimental set-up, data acquisition and analysis to improve the measurements are briefly described.

Editorial: Advances in Optical Techniques for Mechanical Measurements

Recently, optical techniques have attracted great attention due to their excellent non-destructive, non-contact, high-resolution, and full-field characteristics. Applications can be found in diverse fields such as precision mechanics and manufacturing, aerospace and automotive testing and inspection, materials science, and biomedical engineering. Advances in Optical Techniques for Me- chanical Measurements presents the latest research progresses in several widely used optical techniques with applications in preci- sion mechanical engineering.

Experimental and Numerical Study of the Effect of Surround Protection Technique on the Strain Measurement for Offshore Jacket Platform

For strain measurement on offshore jacket platform in deep water, waterproof of strain foil is always an important issue, especially, due to the high pressure in deep water. The waterproof is difficult in two places, one is between the matrix structure and the protection structure, and another is between the lead wires and the protection structure. The surround protection technique discussed in this paper is conventional and ideal, and can be operative for a long time, up to five years. In this method, a metal case and tube is added on the local position, which increases the local rigidity, but the effect on the measurement of strain is not well studied. In this paper, the effect of the surround protection technique on the strain measurement is studied by using numerical and experimental methods, and the results show that the measurement error is well in the range permitted by engineering practice.

The Relationship between Interchangeability Standards and Precision Design in Teaching a Course on Interchangeability and Measurement Techniques

This article discusses some views on the relationship between carrying out and applying standards and precision design and the teaching of a course on interchangeability and measurement techniques. It points out that while emphasizing precision design, we should not underrate the significance of interchangeability and standardization. Although there are presently many teaching models available for such courses, each course should be designed separately to preserve its systematic character and integrality. As well, the development of students' abilities in precision design and the application of standards should be strengthened in experimental lessons within each course.

Analysis of TOPSIS techniques based on bipolar complex fuzzy N-soft setting and their applications in decision-making problems

A novel model termed a bipolar complex fuzzy N-soft set(BCFN-SS)is initiated for tackling information that involves positive and negative aspects,the second dimension,and parameterised grading simultaneously.The theory of BCFN-SS is the generalisation of two various theories,that is,bipolar complex fuzzy(BCF)and N-SS.The invented model of BCFN-SS helps decision-makers to cope with the genuine-life dilemmas containing BCF information along with parameterised grading at the same time.Further,various algebraic operations,including the usual type of union,intersection,complements,and a few others types,are invented.Certain primary operational laws for BCFNSS are also invented.Moreover,a technique for order preference by similarity to the ideal solution(TOPSIS)approach is devised in the setting of BCFN-SS for managing strategic decision-making(DM)dilemmas containing BCFN-SS information.Keeping in mind the usefulness and benefits of the TOPSIS approach,two various types of TOPSIS approaches in the environment of BCFN-SS are devised and then a numerical example for exposing the usefulness of the devised TOPSIS approach is interpreted.To disclose the prominence and benefits of the devised work,the devised approaches with numerous prevailing work are compared.

STUDY ON TESTING TECHNIQUE FOR MEASUREMENT OF FATIGUE－CREEP INTERACTION RESISTANCE

By using dropped stress creep method a new testing technique for measurement of the fa-tigue-creep interaction resistance is developed. At varied adjusted mean stresses the creep testingwas performed repeatedly When an unlimited extensive incubation period with zero creep rate oc-curred. the stress cavsing zero creep rate is defined as fatigue-creep resistance. The developped test-ing technique was used to measure the fatigue-creep resistance in F anc C regions. The dynamic ef-fective stress could yield a better descrption of fatigue and creep interaction. The fatigue-creep rateequations with varied exponents inF of C region are established. The different deformation mecha-nisms in F or C regions are indicated

PROGRESS OF ACOUSTIC WAVE TECHNIQUE ANDITS APPLICATION IN UNDERGROUND PRESSURE MEASUREMENT

This paper carries out tbe experirnent study on the correlation between am stress-strain process of rock samples and the acoustie parameter change of rock by using the measurement system of KS acoustic wave data processing device. On the spot, the stability of surrounding rock is studied by means of experiments on the relationship between the change process (from elastie to plastic failure zone) in surrounding rock of roadway and the change law of acoustic parameters of rock. These acoustie parameters inelude wave amplitude, spectral amplitude, spectrum area, spectral density,wave veloeity and attenuation coefficient etc.

Technique and experiment of active direct gas pressure measurement in coal roadway

An active measurement method and its principle was introduced consideringthe low success rate,special difficulty,and long measurement time of the direct gas pressuremeasurement currently used in coal roadways.The technology of drilling,boreholesealing depth,borehole sealing length,sealing control of the measuring process,compensatorycomputation of gas loss quantity and other key techniques were discussed.Finally,based on the latest instrument the authors developed,a series of experiments of directgas pressure measurement in the coal roadways of the Jincheng and Tongchuanmine district,were carried out.The experimental results show that active gas pressuremeasurement technique has advantages as follows:(1) the application scope of direct gaspressure measurement technique is wide and it does not have the restriction of coalhardness,coal seam fissure and other conditions;(2) the measured results are credible,which can be tested by the same gas pressure value acquired from a different borehole inthe same place;(3) the measurement process is convenient and quick,it takes about 2 to3 days to acquire the gas pressure value in a coal seam.

Ultrasonic Resonator Techniques for Broad-band Spectroscopy and for High-resolution Sound Velocity Measurement of Liquids

This review gives a short introduction into the principles of ultrasonic measurement techniques for liquids,using cavity resonators.Guidelines for the resonator design in broad-band ultrasonic spectroscopy as well as in high-resolution single-frequency or narrow-band applications are presented.Deviations of the field configuration in real cells from that in an ideal resonator are discussed and relations for the mode spectrum of cavity fields are given.Recent resonator measurement procedures and methods of data evaluation are mentioned briefly.Some examples of measurements show the extended usability of ultrasonic resonator techniques in basic science and in a wide range of applications for materials characterization,in manufacturing processes,as well as in control routines.

数值预报中气象卫星资料同化前处理技术进展

在数值天气预报变分同化中,利用同化前处理将卫星资料完成有效信息优选、资料拼接和稀疏化、初级通道选择、下边界参数耦合等处理,实现卫星资料同化对数值天气预报业务的正贡献,是决定海量卫星资料同化效率、质量和效果的重要环节。针对多种格式的卫星资料,中国气象局研发标准格式的高时效卫星资料拼接等技术,有效减小整轨卫星资料时间滞后对数值天气预报业务的负面影响。对于风云气象卫星资料,将云和降水检测、资料质量分析等处理置于同化前处理中,实现多光谱资料融合的同化预质量控制,保证了风云卫星微波温度探测资料和红外高光谱资料的同化正贡献。利用统一资料格式对预处理卫星资料进行再处理,拓展针对卫星成像和主动探测资料的处理,将卫星资料同化的部分质量控制功能置于卫星资料同化前处理中,是风云卫星资料同化前处理技术发展的重要趋势。

电磁脉冲电场测量技术研究综述

宽频带大动态范围的脉冲电场测量是电磁脉冲效应、防护以及电磁兼容等相关领域的一项共性基础技术,在过去50年以来受到研究人员的广泛关注,并发展出不同手段的测量技术。无源微分(D-dot)测量传感器带宽相对较高,但尺寸较大、集成度低;有源光纤测量系统最大测量带宽约为1 GHz,尺寸相对较小、集成度高、实用性强。集成光学传感器作为一种带宽宽、体积小的无源传感器,各国均有研究。本文主要回顾上述几种脉冲电场测量技术近期研究进展,并结合发展现状分析脉冲电场测量技术存在的挑战和未来可能的研究方向,为相关领域研究人员提供参考。

基于双斜坡法的光纤应变快速测量方法

为了提高基于布里渊散射的光纤应变测量的实时性,将仅根据两个工作点布里渊增益计算布里渊频移的双斜坡法用于光纤应变测量。介绍双斜坡法的基本原理,基于仿真布里渊谱研究左右两侧工作点选择对布里渊频移计算准确性的影响规律,确定最佳的工作点。基于确定的最佳工作点和不同信噪比的布里渊谱,研究信噪比(signal-to-noise ratio, SNR)对双斜坡法和最小二乘拟合法准确性的影响规律。结果表明:双斜坡法的两个工作点围绕光纤沿线布里渊频移的均值对称时误差最小;随两个工作点频率之差的增加布里渊频移误差先减小后增大。相似准确性下双斜坡法的布里渊谱测量时间仅为最小二乘拟合法的约1/30,布里渊频移的计算时间仅约为后者的1/480。

腔内ECG定位技术联合体外测量法在PICC中的应用

目的:探讨腔内心电图(ECG)定位技术联合体外测量法在经外周静脉穿刺的中心静脉导管(PICC)中的应用。方法:选取2021年1月—2023年1月阜宁县人民医院收治的100例行上肢PICC置管的患者作为研究对象。根据抛币法将其随机分为观察组和对照组,各50例。两组均进行PICC,对照组PICC应用体外测量法,观察组PICC应用腔内ECG定位技术联合体外测量法。比较两组一次性置管情况、导管相关并发症、置管满意度。结果:观察组置管准确率为98.00%,高于对照组的86.00%,置管过深率低于对照组,差异有统计学意义(P<0.05)。两组并发症发生率比较,差异无统计学意义(P>0.05)。观察组总满意度为100%,高于对照组的92.00%,差异有统计学意义(P<0.05)。结论:腔内ECG定位技术联合体外测量法可提高一次置管准确率,提高患者满意率。

电催化硝酸根还原制氨

在创新教育背景下,以硝酸根电催化还原制氨为反应案例,将科研成果融入到实验教学中。基于学生已掌握的实验技能和基础电化学知识,利用电化学测量技术、核磁共振波谱法、紫外分光光度法等探究催化剂电催化硝酸根还原制氨的性能。通过具体的实验操作,让学生进一步认识电催化的基本原理,掌握基础的电化学测量技术,激发学生对电化学合成的兴趣。本教学实验内容丰富,涉及多学科知识,满足多学科交叉融合发展需求,有利于学生创新发散思维的培养,符合新时代学科教育要求。