The Study of Full-Size Objects’ Bistatic Rader Cross Section Measurement Based on Photoelectric Conversion

In the past years, bistatic Radar Cross Section (RCS) characteristic has been caught increasing attention. The paper presents a bistatic RCS measurement system of full-size goals, which uses photoelectric conversion technology to solve the problem that excessive electrical signal attenuation exits because of the large distance between sending and receiving antenna. The paper analyzes the basic principle of photoelectric conversion and RCS measurement system, applies photoelectric conversion technology to RCS measurement system, and tests whether RCS measurement system works well while using photoelectric conversion technology. The test results show that the system can efficiently obtain the bistatic RCS characteristic of full-size targets.

Prospects of Bioenergy Production for Sustainable Rural Development in Ghana

Biomass supplies about 80% of the energy needs for cooking and heating in rural Ghana. It is predominantly used in traditional and inefficient forms (firewood and charcoal), which presents environmental and health concerns. In order to better the living standard in rural Ghana, efforts must be made to provide modern energy services. Most rural communities in Ghana are so remote that an extension of the national grid is uneconomical, hence biomass electricity provides a viable alternative. Biomass is pivotal to the socio-economic development of rural Ghana due to its easy accessibility and enormous potential in the production of varied energy forms. In this paper, a comprehensive review of biomass resources, biomass energy conversion technologies and bioenergy production potential for rural development in Ghana is provided. The most important feedstock from an energy perspective was found to be crop residues. Based on 2017 statistics, Ghana has a theoretical potential of 623.84 PJ of energy from agricultural crop residues and 64.27 PJ of energy from livestock production. Evidence from literature suggests that biomass gasification is the best conversion technology to expand electricity access rate for rural households in Ghana. The paper concludes that although ample biomass resources exist, cocoa pod husks (CPH) which is very common in rural Ghana can be pelletized and used as feedstock for rural power generation systems.

CNFET-based voltage rectifier circuit for biomedical implantable applications

Carbon nanotube field effect transistor（CNFET） shows lower threshold voltage and smaller leakage current in comparison to its CMOS counterpart. In this paper, two kinds of CNFET-based rectifiers, full-wave rectifiers and voltage doubler rectifiers are presented for biomedical implantable applications. Based on the standard 32 nm CNFET model, the electrical performance of CNFET rectifiers is analyzed and compared. Simulation results show the voltage conversion efficiency（VCE） and power conversion efficiency（PCE） achieve 70.82% and 72.49% for CNFET full-wave rectifiers and 56.60% and 61.17% for CNFET voltage double rectifiers at typical 1.0 V input voltage excitation, which are higher than that of CMOS design. Moreover, considering the controllable property of CNFET threshold voltage, the effect of various design parameters on the electrical performance is investigated.It is observed that the VCE and PCE of CNFET rectifier increase with increasing CNT diameter and number of tubes. The proposed results would provide some guidelines for design and optimization of CNFET-based rectifier circuits.