In this work, we performed in situ nanoindentation in TEM to capture the real-time dislocation and twinning activities in pure Mg during loading and unloading. We demonstrated that the screw component of dislocations ...In this work, we performed in situ nanoindentation in TEM to capture the real-time dislocation and twinning activities in pure Mg during loading and unloading. We demonstrated that the screw component of dislocations glides continuously, while the edge components rapidly become sessile during loading. The twin tip propagation is intermittent, whereas the twin boundary migration is more continuous. During unloading, we observed the elastic strain relaxation causes both dislocation retraction and detwinning. Moreover,we note that the plastic zone comprised of dislocations in Mg is well-defined, which contrasts with the diffused plastic zones observed in face-centered cubic metals under the nanoindentation impressions. Additionally, molecular dynamics simulations were performed to study the formation and evolution of deformation-induced crystallographic defects at the early stages of indentation. We observed that,in addition to dislocations, the I1stacking fault bounded with a <1/2c+p> Frank loop can be generated from the plastic zone ahead of the indenter, and potentially serve as a nucleation source for abundant dislocations observed experimentally. These new findings are anticipated to provide new knowledge on the deformation mechanisms of Mg, which are difficult to obtain through conventional ex situ approaches. These observations may serve as a baseline for simulation work that investigate the dynamics of dislocation slip and twinning in Mg and alloys.展开更多
The negative thermal expansion(NTE) phenomenon is of great significance in fabricating zero thermal expansion(ZTE) materials to avoid thermal shock during heating and cooling. NTE is observed in limited groups of mate...The negative thermal expansion(NTE) phenomenon is of great significance in fabricating zero thermal expansion(ZTE) materials to avoid thermal shock during heating and cooling. NTE is observed in limited groups of materials, e.g., metal cyanides, oxometallates, and metalorganic frameworks, but has not been reported in the family of metal hydrides. Herein, a colossal and continuous negative thermal expansion is firstly developed in the low-temperature phases of LT1-and LT2-Mg_(2)NiH_(4) between 488 K and 733 K from in-situ transmission electron microscope(TEM) video, with the volume contraction reaching 18.7% and 11.3%, respectively. The mechanisms for volume contraction of LT1 and LT2 phases are elucidated from the viewpoints of phase transformation, magnetic transition, and dehydrogenation, which is different from common NTE materials containing flexible polyhedra units in the structure. The linear volume shrinkage of LT2 in the temperature of 488-553 K corresponds to the phase transition of LT2→HT with a thermal expansion coefficient of -799.7 × 10^(-6) K^(-1) revealed by in-situ synchrotron powder X-ray diffraction. The sudden volume contraction in LT1 between 488 and 493 K may be caused by the rapid dehydrogenation of LT1 to Mg_(2)Ni. The revealed phenomenon in single composite material with different structures would be significant for preparing zero thermal expansion materials by tuning the fraction of LT1 and LT2 phases.展开更多
基金supported by the National Science Foundation (Division of Materials Research,Program Manager: Dr.Jonathan Madison) under Grant No.2144973financially supported by the startup fund from Drexel University。
文摘In this work, we performed in situ nanoindentation in TEM to capture the real-time dislocation and twinning activities in pure Mg during loading and unloading. We demonstrated that the screw component of dislocations glides continuously, while the edge components rapidly become sessile during loading. The twin tip propagation is intermittent, whereas the twin boundary migration is more continuous. During unloading, we observed the elastic strain relaxation causes both dislocation retraction and detwinning. Moreover,we note that the plastic zone comprised of dislocations in Mg is well-defined, which contrasts with the diffused plastic zones observed in face-centered cubic metals under the nanoindentation impressions. Additionally, molecular dynamics simulations were performed to study the formation and evolution of deformation-induced crystallographic defects at the early stages of indentation. We observed that,in addition to dislocations, the I1stacking fault bounded with a <1/2c+p> Frank loop can be generated from the plastic zone ahead of the indenter, and potentially serve as a nucleation source for abundant dislocations observed experimentally. These new findings are anticipated to provide new knowledge on the deformation mechanisms of Mg, which are difficult to obtain through conventional ex situ approaches. These observations may serve as a baseline for simulation work that investigate the dynamics of dislocation slip and twinning in Mg and alloys.
基金supported by the National Key Research and Development Program of China (2021YFB3701001)the National Natural Science Foundation of China (51871143)+1 种基金Shanghai Engineering Research Center for Metal Parts Green Remanufacture (No.19DZ2252900) from Shanghai Engineering Research Center Construction ProjectShanghai Rising-Star Program (21QA1403200)。
文摘The negative thermal expansion(NTE) phenomenon is of great significance in fabricating zero thermal expansion(ZTE) materials to avoid thermal shock during heating and cooling. NTE is observed in limited groups of materials, e.g., metal cyanides, oxometallates, and metalorganic frameworks, but has not been reported in the family of metal hydrides. Herein, a colossal and continuous negative thermal expansion is firstly developed in the low-temperature phases of LT1-and LT2-Mg_(2)NiH_(4) between 488 K and 733 K from in-situ transmission electron microscope(TEM) video, with the volume contraction reaching 18.7% and 11.3%, respectively. The mechanisms for volume contraction of LT1 and LT2 phases are elucidated from the viewpoints of phase transformation, magnetic transition, and dehydrogenation, which is different from common NTE materials containing flexible polyhedra units in the structure. The linear volume shrinkage of LT2 in the temperature of 488-553 K corresponds to the phase transition of LT2→HT with a thermal expansion coefficient of -799.7 × 10^(-6) K^(-1) revealed by in-situ synchrotron powder X-ray diffraction. The sudden volume contraction in LT1 between 488 and 493 K may be caused by the rapid dehydrogenation of LT1 to Mg_(2)Ni. The revealed phenomenon in single composite material with different structures would be significant for preparing zero thermal expansion materials by tuning the fraction of LT1 and LT2 phases.