Different from the traditional hydraulic oil cooling method,a new type of constant temperature oil tank cooling system based on semiconductor refrigeration technology is designed. This paper studies the principle of s...Different from the traditional hydraulic oil cooling method,a new type of constant temperature oil tank cooling system based on semiconductor refrigeration technology is designed. This paper studies the principle of semiconductor refrigeration and establishes a heat transfer model. Semiconductor cooler on piping refrigeration is simulated,and influence of the parameters on the outlet temperature,such as pipe pressure difference of inlet and outlet,pipe length,pipe radius,are gotten,and then hydraulic tank semiconductor refrigeration system is proposed. The semiconductor refrigeration system can control temperature at 37 ± 1°C.展开更多
The dynamic evolution of microstructure and the characteristics of deformation , as well as the relationshipbetween them have ben studied for TCll alloy with different original conditions, including as-cast, as-rolled...The dynamic evolution of microstructure and the characteristics of deformation , as well as the relationshipbetween them have ben studied for TCll alloy with different original conditions, including as-cast, as-rolled ,as-forged and as-predeformed on casting, during comparison at constant temperature (CCT). The resultsshow that (1) Micrcotructural process during CCT of cast TCll comprises two stages: (i) Founding ofu dynamic equilibrium ”. Original coarse structure breaks up and becomes equiaxed, while the stras decreasesaccordingly. The microstructure gradually trends towards some kind of “dynamic ellullibrium” morphology;(ii) Keeping of “dynamic equilibrium”. Both stress and micrcostructural morphology preserve stable althoughdeformation continues. (2) The final pouilibrium morphology das not depend on its initial microstructure, buton the parameter Z(T, e) .展开更多
We report an improved method for the preparation of highly dense nickelate ceramics at relatively low temperature. It is found that the introduction of appropriate additives during the ball-milling process facilitates...We report an improved method for the preparation of highly dense nickelate ceramics at relatively low temperature. It is found that the introduction of appropriate additives during the ball-milling process facilitates the formation of nickelate phase through solid state reaction. Moreover, although high-purity nickelate powders can only be obtained by calcining the mixture of starting materials at temperature higher than 1100 ℃. The adoption of powders calcined at 1000 ℃, rather than those calcined at higher temperature, is conductive to the low-temperature densification of nickelate ceramics, which is attributed to the small and dispersive particles, and the solid state reaction of the residual starting materials during sintering. Compared with the conventional process, the improved method can reduce the sintering temperature of nickelate ceramics by about 100 ℃ and decrease the grain size of the obtained ceramics, and therefore makes nickelate meet the fabrication requirements of multi-layer ceramic capacitors(MLCC).展开更多
We discuss in this paper a novel interpretation of Born rule as an approximated thermodynamic law which emerges from the interaction of a quantum system with a non-stationary thermal bath associated to vacuum fluctuat...We discuss in this paper a novel interpretation of Born rule as an approximated thermodynamic law which emerges from the interaction of a quantum system with a non-stationary thermal bath associated to vacuum fluctuations induced by external environment radiation. In particular we assume that vacuum polarization is a real non relativistic phenomena caused by hidden vacuum charge oscillations which diffuses heat energy in a dispersive and dissipative dielectric medium with a temperature dependent speed of propagation. We propose a model which couples vacuum wavefunctions to vacuum charge fluctuations and we deduce a temperature dependent running fine structure constant function proportional, at first approximation, to the squared of the effective electron charge and compatible with known experimental data. We interpret the vacuum symmetry breaking energy fluctuations induced in scattering experiments of particle physics and in laser assisted nuclear reactions as thermal quasi-monochromatic beams produced by the decay of hidden non equilibrium massive photons propagating with a variable light speed. We suggest, exploiting an old analogy between plasmons and pseudo Goldstone bosons, to interpret heat diffusion of this non relativistic polarized vacuum as a real De Broglie electromagnetic scalar wave associated to the radiation emitted by the hidden massive photons with acceleration proportional to vacuum Unruh like temperature. We predict a temperature dependent deviation from Coulomb law and a generalized dispersive law of these hidden unstable photons that could be revealed as not stationary coloured noise in experiments on anomalous heat diffusions associated to the decay of unstable accelerated pairs produced in nuclear physics experiments. We discuss then how our proposal of a temperature dependent non relativistic vacuum polarization might be applied to deduce a dynamic generalization of Born rule based on a realistic interpretation of quantum wavefunctions as averaged electromagnetic waves of hidden massive photons. Finally we suggest to test our time asymmetric model looking for very fast oscillating polarization thermal waves emitted during the not instantaneous wavefunction collapse and revealed as not stationary bulk heating effects in experiments on accelerated conductors and nanoconductors.展开更多
The work covers a novel approach to the description of the phenomenon of thermal expansion of solids. The reason for undertaking the scientific quest is presented to follow with the analysis of existing knowledge on t...The work covers a novel approach to the description of the phenomenon of thermal expansion of solids. The reason for undertaking the scientific quest is presented to follow with the analysis of existing knowledge on the characteristics of phenomenon of thermal expansion of bodies being in the state of aggregation. A critical approach to the existing law of the linear thermal expansion is given. The paper presents an adequate approach to this considered phenomenon. The description provides parametric and functional characteristics of this phenomenon. The relationships of the coefficients of linear expansion on temperature for particular interstate zones, as well as the initial coefficients related to these zones, are presented. In the summary a synthesis of all actions and considerations with the directions to the adequate knowledge with advantage on the subjected phenomenon has been performed. It regards also to the latest thermal characteristics of solids, referred to the phase transformations. All they are realized by dilatometric studies together with determination of curves of thermal expansions of solids.展开更多
The effect of curing regime on degree ofAl3+ substituting for Si^4+ (Al/Si ratio) in C-S-H gels of hardened Portland cement pastes was investigated by 29Si magic angel spinning (MAS) nuclear magnetic resonance ...The effect of curing regime on degree ofAl3+ substituting for Si^4+ (Al/Si ratio) in C-S-H gels of hardened Portland cement pastes was investigated by 29Si magic angel spinning (MAS) nuclear magnetic resonance (NMR) with deconvolution technique. The curing regimes included the constant temperature (20, 40, 60 and 80 ℃) and variable temperature (simulated internal temperature of mass concrete with 60 ℃ peak). The results indicate that constant temperature of 20 ℃ is beneficial to substitution ofAl3+ for Si4+, and AI/Si ratio changes to be steady after 180 d. The increase of Al/Si ratio at 40 ℃is less than that at 20℃ for 28 d. The other three regimes of high temperature increase Al/Si ratio only before 3 d, on the contrary to that from 3 to 28 d. However, the 20 ℃ curing stage from 28 to 180 d at variable temperature regime, is beneficial to the increase of AI/Si ratio which is still lower than that at constant temperature regime of 20 ℃ for the same age. A nonlinear relation exists between the Al/Si ratio and temperature variation or mean chain length (MCL) of C-S-H gels, furthermore, the amount ofAl3+ which can occupy the bridging tetrahedra sites in C-S-H structure is insufficient in hardened Portland cement pastes.展开更多
基金Supported by the National Natural Science Foundation of China(No.51175448,51405424)
文摘Different from the traditional hydraulic oil cooling method,a new type of constant temperature oil tank cooling system based on semiconductor refrigeration technology is designed. This paper studies the principle of semiconductor refrigeration and establishes a heat transfer model. Semiconductor cooler on piping refrigeration is simulated,and influence of the parameters on the outlet temperature,such as pipe pressure difference of inlet and outlet,pipe length,pipe radius,are gotten,and then hydraulic tank semiconductor refrigeration system is proposed. The semiconductor refrigeration system can control temperature at 37 ± 1°C.
文摘The dynamic evolution of microstructure and the characteristics of deformation , as well as the relationshipbetween them have ben studied for TCll alloy with different original conditions, including as-cast, as-rolled ,as-forged and as-predeformed on casting, during comparison at constant temperature (CCT). The resultsshow that (1) Micrcotructural process during CCT of cast TCll comprises two stages: (i) Founding ofu dynamic equilibrium ”. Original coarse structure breaks up and becomes equiaxed, while the stras decreasesaccordingly. The microstructure gradually trends towards some kind of “dynamic ellullibrium” morphology;(ii) Keeping of “dynamic equilibrium”. Both stress and micrcostructural morphology preserve stable althoughdeformation continues. (2) The final pouilibrium morphology das not depend on its initial microstructure, buton the parameter Z(T, e) .
基金supported by the Natural Science Foundation of Fujian Province(2015j01231)the Chunmiao Project of Haixi Institute of Chinese Academy of Sciences(CMZX-2014-005)the National Key Research and Development Program of China(2016YFB0701003)
文摘We report an improved method for the preparation of highly dense nickelate ceramics at relatively low temperature. It is found that the introduction of appropriate additives during the ball-milling process facilitates the formation of nickelate phase through solid state reaction. Moreover, although high-purity nickelate powders can only be obtained by calcining the mixture of starting materials at temperature higher than 1100 ℃. The adoption of powders calcined at 1000 ℃, rather than those calcined at higher temperature, is conductive to the low-temperature densification of nickelate ceramics, which is attributed to the small and dispersive particles, and the solid state reaction of the residual starting materials during sintering. Compared with the conventional process, the improved method can reduce the sintering temperature of nickelate ceramics by about 100 ℃ and decrease the grain size of the obtained ceramics, and therefore makes nickelate meet the fabrication requirements of multi-layer ceramic capacitors(MLCC).
文摘We discuss in this paper a novel interpretation of Born rule as an approximated thermodynamic law which emerges from the interaction of a quantum system with a non-stationary thermal bath associated to vacuum fluctuations induced by external environment radiation. In particular we assume that vacuum polarization is a real non relativistic phenomena caused by hidden vacuum charge oscillations which diffuses heat energy in a dispersive and dissipative dielectric medium with a temperature dependent speed of propagation. We propose a model which couples vacuum wavefunctions to vacuum charge fluctuations and we deduce a temperature dependent running fine structure constant function proportional, at first approximation, to the squared of the effective electron charge and compatible with known experimental data. We interpret the vacuum symmetry breaking energy fluctuations induced in scattering experiments of particle physics and in laser assisted nuclear reactions as thermal quasi-monochromatic beams produced by the decay of hidden non equilibrium massive photons propagating with a variable light speed. We suggest, exploiting an old analogy between plasmons and pseudo Goldstone bosons, to interpret heat diffusion of this non relativistic polarized vacuum as a real De Broglie electromagnetic scalar wave associated to the radiation emitted by the hidden massive photons with acceleration proportional to vacuum Unruh like temperature. We predict a temperature dependent deviation from Coulomb law and a generalized dispersive law of these hidden unstable photons that could be revealed as not stationary coloured noise in experiments on anomalous heat diffusions associated to the decay of unstable accelerated pairs produced in nuclear physics experiments. We discuss then how our proposal of a temperature dependent non relativistic vacuum polarization might be applied to deduce a dynamic generalization of Born rule based on a realistic interpretation of quantum wavefunctions as averaged electromagnetic waves of hidden massive photons. Finally we suggest to test our time asymmetric model looking for very fast oscillating polarization thermal waves emitted during the not instantaneous wavefunction collapse and revealed as not stationary bulk heating effects in experiments on accelerated conductors and nanoconductors.
文摘The work covers a novel approach to the description of the phenomenon of thermal expansion of solids. The reason for undertaking the scientific quest is presented to follow with the analysis of existing knowledge on the characteristics of phenomenon of thermal expansion of bodies being in the state of aggregation. A critical approach to the existing law of the linear thermal expansion is given. The paper presents an adequate approach to this considered phenomenon. The description provides parametric and functional characteristics of this phenomenon. The relationships of the coefficients of linear expansion on temperature for particular interstate zones, as well as the initial coefficients related to these zones, are presented. In the summary a synthesis of all actions and considerations with the directions to the adequate knowledge with advantage on the subjected phenomenon has been performed. It regards also to the latest thermal characteristics of solids, referred to the phase transformations. All they are realized by dilatometric studies together with determination of curves of thermal expansions of solids.
基金Funded by the Major State Basic Research Development Program of China(973 Program)(No.2009CB623201)National Natural Science Foundation of China(No.51302070)
文摘The effect of curing regime on degree ofAl3+ substituting for Si^4+ (Al/Si ratio) in C-S-H gels of hardened Portland cement pastes was investigated by 29Si magic angel spinning (MAS) nuclear magnetic resonance (NMR) with deconvolution technique. The curing regimes included the constant temperature (20, 40, 60 and 80 ℃) and variable temperature (simulated internal temperature of mass concrete with 60 ℃ peak). The results indicate that constant temperature of 20 ℃ is beneficial to substitution ofAl3+ for Si4+, and AI/Si ratio changes to be steady after 180 d. The increase of Al/Si ratio at 40 ℃is less than that at 20℃ for 28 d. The other three regimes of high temperature increase Al/Si ratio only before 3 d, on the contrary to that from 3 to 28 d. However, the 20 ℃ curing stage from 28 to 180 d at variable temperature regime, is beneficial to the increase of AI/Si ratio which is still lower than that at constant temperature regime of 20 ℃ for the same age. A nonlinear relation exists between the Al/Si ratio and temperature variation or mean chain length (MCL) of C-S-H gels, furthermore, the amount ofAl3+ which can occupy the bridging tetrahedra sites in C-S-H structure is insufficient in hardened Portland cement pastes.