A dedicated weak current measurement system was designed to measure the weak currents generated by the neutron ionization chamber.This system incorporates a second-order low-pass filter circuit and the Kalman filterin...A dedicated weak current measurement system was designed to measure the weak currents generated by the neutron ionization chamber.This system incorporates a second-order low-pass filter circuit and the Kalman filtering algorithm to effectively filter out noise and minimize interference in the measurement results.Testing conducted under normal temperature conditions has demonstrated the system's high precision performance.However,it was observed that temperature variations can affect the measurement performance.Data were collected across temperatures ranging from -20 to 70℃,and a temperature correction model was established through linear regression fitting to address this issue.The feasibility of the temperature correction model was confirmed at temperatures of -5 and 40℃,where relative errors remained below 0.1% after applying the temperature correction.The research indicates that the designed measurement system exhibits excellent temperature adaptability and high precision,making it particularly suitable for measuring weak currents.展开更多
By using the falling weight deflectometer(FWD),the dynamic loading tests on different thickness of asphalt mixture pavement in different temperature were performed.The experimental results show that the effects of t...By using the falling weight deflectometer(FWD),the dynamic loading tests on different thickness of asphalt mixture pavement in different temperature were performed.The experimental results show that the effects of temperature on dynamic properties of asphalt mixture are significant,and the thickness of asphalt mixture is also another important influence factor.The comparisons indicate that effect of temperature on the behaviors of dynamic loading properties and static loading properties of asphalt mixture were quite different.展开更多
The heights of automatic weather station (AWS) sensors over the Antarctic ice sheet are nominal and change with snow accumulation or ablation. Therefore, the measured data may not be used directly. In this study, we...The heights of automatic weather station (AWS) sensors over the Antarctic ice sheet are nominal and change with snow accumulation or ablation. Therefore, the measured data may not be used directly. In this study, we analyzed the impact of snow accumulation on AWS observations using continuous measurements from three AWS that were deployed on the traverse route from the Zhongshan Station to Dome A over East Antarctica. We then corrected the measured air temperature to account for changes in the sensor height relative to the snow surface to improve the authenticity and representativeness of the observation data from the AWS. The results show that (i) the annual mean snow accumulations at Dome A, Eagle and LGB69 were approximately O. 11 m, 0.30 m and 0.49 m, respectively, and the corresponding annual mean air temperature differences between the corrected and measured values at 1 m in height were 0.34℃, 0.29℃ and 0.35℃ (ii) the impact on air temperature from accumulation decreases with height from the surface; (iii) the air temperature difference between the corrected and measured values was not directly proportional to the snow accumulation but was related to the seasonal air temperature variations and the intensity of the local surface inversion; and (iv) the averaged corrected air temperature was higher than the measured values except during the summer when there were days without temperature inversion. The magnitude of the temperature difference between the corrected and measured was mainly determined by snow accumulation and the intensity of the local surface inversion.展开更多
The temperature difference of fruit itself will affect its near infrared spectrum and the accuracy of its soluble solids content(SSC)prediction model.To eliminate the influence of apple temperature difference on the S...The temperature difference of fruit itself will affect its near infrared spectrum and the accuracy of its soluble solids content(SSC)prediction model.To eliminate the influence of apple temperature difference on the SSC model,a diffuse transmission dynamic online detection device was used to collect the spectral data of apples at different temperatures,and four methods were used to establish partial least squares correction models:global correction,orthogonal signal processing,generalized least squares weighting and external parameter orthogonal(EPO).The results show that the temperature has a strong influence on the diffuse transmission spectrum of apples.The 20ºC model can get a satisfactory prediction result when the temperature is constant,and there will be great errors when detecting samples at other temperatures.The effect of temperature must be corrected to establish a more general model.These methods all improve the accuracy of the model,with the EPO method giving the best results;the prediction set correlation coefficient is 0.947,the root mean square error of prediction is 0.489%,and the prediction bias is 0.009%.The research results are of great significance to the practical application of SSC prediction of fruits in sorting workshops or orchards.展开更多
Measuring the thickness of steel plates during the hot rolling process IS crucial tor getnng me necessary feedback to obtain the desired values at room temperature. The dilatation and the phase transformations of stee...Measuring the thickness of steel plates during the hot rolling process IS crucial tor getnng me necessary feedback to obtain the desired values at room temperature. The dilatation and the phase transformations of steel occur during heating and subsequent cooling and rolling strongly influences the results of thickness measurements. The radiometrie method provides the necessary means for making real-time and fully automatized measurements of steel thickness during rolling, if only the temperature correction is precisely known and taken into consideration. This article proves that the experimental results concerning the relative variation of steel thickness and corresponding massthickness variation can be correctly explained by means of the theory of metal dilatation correlated with the theory of nuclear radiation absorption when passing through a metal or metallic alloy, such as steel.展开更多
Owing to some excellent properties(such as large transmission ratio, high reliability, high precision,large stiffness, small volume and long service life), filtering reducers are suitable for occasions with high requi...Owing to some excellent properties(such as large transmission ratio, high reliability, high precision,large stiffness, small volume and long service life), filtering reducers are suitable for occasions with high requirements(e.g. space equipment). However, the tough working condition in space(including frequent changes of temperature, and large temperature difference combined with shock loads) may significantly affect the reliability.In this paper, the expressions of the minimal and maximal instantaneous transmission ratios(ITRs) considering temperature correction are developed. The minimal and maximal ITRs from simulation are used to verify the accuracy. Moreover, the reliability of a filtering reducer under different temperatures and the shock load are calculated, respectively. The research is beneficial to the design of spacecraft mechanism.展开更多
The Plastic Scintillator Detector(PSD) is one of the main sub-detectors in the DArk Matter Particle Explorer(DAMPE) project. It will be operated over a large temperature range from -10 to 30, so the temperature ef...The Plastic Scintillator Detector(PSD) is one of the main sub-detectors in the DArk Matter Particle Explorer(DAMPE) project. It will be operated over a large temperature range from -10 to 30, so the temperature effect of the whole detection system should be studied in detail. The temperature dependence of the PSD system is mainly contributed by the three parts: the plastic scintillator bar, the photomultiplier tube(PMT), and the Front End Electronics(FEE). These three parts have been studied in detail and the contribution of each part has been obtained and discussed. The temperature coefficient of the PMT is -0.320(±0.033)%/℃, and the coefficient of the plastic scintillator bar is -0.036(±0.038)%/℃. This result means that after subtracting the FEE pedestal, the variation of the signal amplitude of the PMT-scintillator system due to temperature mainly comes from the PMT,and the plastic scintillator bar is not sensitive to temperature over the operating range. Since the temperature effect cannot be ignored, the temperature dependence of the whole PSD has been also studied and a correction has been made to minimize this effect. The correction result shows that the effect of temperature on the signal amplitude of the PSD system can be suppressed.展开更多
In this paper,the transfer functions of ultrasonic transducers under different temperatures are imitated according to Mason equivalent circuit. The relevant experiments are carried out. The results show that the trans...In this paper,the transfer functions of ultrasonic transducers under different temperatures are imitated according to Mason equivalent circuit. The relevant experiments are carried out. The results show that the transfer characteristic of ultrasonic transducer varies with temperature and pressure. Therefore, we present an approach to correct the amplitude spectra of ultrasonic echoes got in different temperature and pressure environmeots. The theoretical simulation and experimental results prove that the approach is simple, effective and practical.展开更多
The compressive behaviors of medium carbon steel specimens were investigated over a wide range of tem- peratures and strain rates using a Gleeble-3500 thermo-simulation machine. The results show that the flow stress i...The compressive behaviors of medium carbon steel specimens were investigated over a wide range of tem- peratures and strain rates using a Gleeble-3500 thermo-simulation machine. The results show that the flow stress in- creased with strain at first, and then gradually decreased after reaching a peak value. The flow stress softening rate at a high strain rate was larger than that at a low strain rate. The effects of deformation heating and friction on flow stress were analyzed. A new friction correction method, wherein the effect of strain on frictional coefficient was con- sidered, was established here. The stresses revised by the new method deviated from the measured stresses with in- creasing strain. Meanwhile, the apparent frictional coefficient variation law with strain was obtained. The frictional coefficient increased as the strain increased and then slightly decreased after maintaining a constant value. The stress was corrected by considering deformation heating. The accuracy of the temperature correction method was verified using a special experiment. The results of the verification experiment show that the temperature correction method exhibited a good accuracy in calculating the variation of stress caused by deformation heating. A constitutive model considering strain was proposed here to describe the deformation behaviors. Compared with experimental data, the modified constitutive model exhibited a good accuracy as to constitutive correlation.展开更多
基金supported by the Youth Science Foundation of Sichuan Province(Nos.2022NSFSC1230 and 2022NSFSC1231)the Science and Technology Innovation Seedling Project of Sichuan Province(No.MZGC20230080)+1 种基金the General project of the National Natural Science Foundation of China(No.12075039)the Key project of the National Natural Science Foundation of China(No.U19A2086)。
文摘A dedicated weak current measurement system was designed to measure the weak currents generated by the neutron ionization chamber.This system incorporates a second-order low-pass filter circuit and the Kalman filtering algorithm to effectively filter out noise and minimize interference in the measurement results.Testing conducted under normal temperature conditions has demonstrated the system's high precision performance.However,it was observed that temperature variations can affect the measurement performance.Data were collected across temperatures ranging from -20 to 70℃,and a temperature correction model was established through linear regression fitting to address this issue.The feasibility of the temperature correction model was confirmed at temperatures of -5 and 40℃,where relative errors remained below 0.1% after applying the temperature correction.The research indicates that the designed measurement system exhibits excellent temperature adaptability and high precision,making it particularly suitable for measuring weak currents.
基金Funded by the Science and Technology Program of Communications Department of Henan Province (No.200612)
文摘By using the falling weight deflectometer(FWD),the dynamic loading tests on different thickness of asphalt mixture pavement in different temperature were performed.The experimental results show that the effects of temperature on dynamic properties of asphalt mixture are significant,and the thickness of asphalt mixture is also another important influence factor.The comparisons indicate that effect of temperature on the behaviors of dynamic loading properties and static loading properties of asphalt mixture were quite different.
基金supported by the National Natural Science Foundation of China (Grant nos.40575033, 40776002, 40620120112)the National Science and Technology Infrastructure Program of the Ministry of Science and Technology of China (Grant no. 2006BAC06B05)
文摘The heights of automatic weather station (AWS) sensors over the Antarctic ice sheet are nominal and change with snow accumulation or ablation. Therefore, the measured data may not be used directly. In this study, we analyzed the impact of snow accumulation on AWS observations using continuous measurements from three AWS that were deployed on the traverse route from the Zhongshan Station to Dome A over East Antarctica. We then corrected the measured air temperature to account for changes in the sensor height relative to the snow surface to improve the authenticity and representativeness of the observation data from the AWS. The results show that (i) the annual mean snow accumulations at Dome A, Eagle and LGB69 were approximately O. 11 m, 0.30 m and 0.49 m, respectively, and the corresponding annual mean air temperature differences between the corrected and measured values at 1 m in height were 0.34℃, 0.29℃ and 0.35℃ (ii) the impact on air temperature from accumulation decreases with height from the surface; (iii) the air temperature difference between the corrected and measured values was not directly proportional to the snow accumulation but was related to the seasonal air temperature variations and the intensity of the local surface inversion; and (iv) the averaged corrected air temperature was higher than the measured values except during the summer when there were days without temperature inversion. The magnitude of the temperature difference between the corrected and measured was mainly determined by snow accumulation and the intensity of the local surface inversion.
基金the National Natural Science Foundation of China(No.31760344)the Science and Technology Research Project of Education Department of Jiangxi Province(No.GJJ200615),China。
文摘The temperature difference of fruit itself will affect its near infrared spectrum and the accuracy of its soluble solids content(SSC)prediction model.To eliminate the influence of apple temperature difference on the SSC model,a diffuse transmission dynamic online detection device was used to collect the spectral data of apples at different temperatures,and four methods were used to establish partial least squares correction models:global correction,orthogonal signal processing,generalized least squares weighting and external parameter orthogonal(EPO).The results show that the temperature has a strong influence on the diffuse transmission spectrum of apples.The 20ºC model can get a satisfactory prediction result when the temperature is constant,and there will be great errors when detecting samples at other temperatures.The effect of temperature must be corrected to establish a more general model.These methods all improve the accuracy of the model,with the EPO method giving the best results;the prediction set correlation coefficient is 0.947,the root mean square error of prediction is 0.489%,and the prediction bias is 0.009%.The research results are of great significance to the practical application of SSC prediction of fruits in sorting workshops or orchards.
文摘Measuring the thickness of steel plates during the hot rolling process IS crucial tor getnng me necessary feedback to obtain the desired values at room temperature. The dilatation and the phase transformations of steel occur during heating and subsequent cooling and rolling strongly influences the results of thickness measurements. The radiometrie method provides the necessary means for making real-time and fully automatized measurements of steel thickness during rolling, if only the temperature correction is precisely known and taken into consideration. This article proves that the experimental results concerning the relative variation of steel thickness and corresponding massthickness variation can be correctly explained by means of the theory of metal dilatation correlated with the theory of nuclear radiation absorption when passing through a metal or metallic alloy, such as steel.
基金the Open Foundation of the State Key Laboratory of Mechanical Transmissions of Chongqing University(No.SKLMT-KFKT-201601)
文摘Owing to some excellent properties(such as large transmission ratio, high reliability, high precision,large stiffness, small volume and long service life), filtering reducers are suitable for occasions with high requirements(e.g. space equipment). However, the tough working condition in space(including frequent changes of temperature, and large temperature difference combined with shock loads) may significantly affect the reliability.In this paper, the expressions of the minimal and maximal instantaneous transmission ratios(ITRs) considering temperature correction are developed. The minimal and maximal ITRs from simulation are used to verify the accuracy. Moreover, the reliability of a filtering reducer under different temperatures and the shock load are calculated, respectively. The research is beneficial to the design of spacecraft mechanism.
基金Supported by Strategic Priority Research Program on Space Science of the Chinese Academy of Sciences(XDA04040202-3)Youth Innovation Promotion Association,CAS
文摘The Plastic Scintillator Detector(PSD) is one of the main sub-detectors in the DArk Matter Particle Explorer(DAMPE) project. It will be operated over a large temperature range from -10 to 30, so the temperature effect of the whole detection system should be studied in detail. The temperature dependence of the PSD system is mainly contributed by the three parts: the plastic scintillator bar, the photomultiplier tube(PMT), and the Front End Electronics(FEE). These three parts have been studied in detail and the contribution of each part has been obtained and discussed. The temperature coefficient of the PMT is -0.320(±0.033)%/℃, and the coefficient of the plastic scintillator bar is -0.036(±0.038)%/℃. This result means that after subtracting the FEE pedestal, the variation of the signal amplitude of the PMT-scintillator system due to temperature mainly comes from the PMT,and the plastic scintillator bar is not sensitive to temperature over the operating range. Since the temperature effect cannot be ignored, the temperature dependence of the whole PSD has been also studied and a correction has been made to minimize this effect. The correction result shows that the effect of temperature on the signal amplitude of the PSD system can be suppressed.
文摘In this paper,the transfer functions of ultrasonic transducers under different temperatures are imitated according to Mason equivalent circuit. The relevant experiments are carried out. The results show that the transfer characteristic of ultrasonic transducer varies with temperature and pressure. Therefore, we present an approach to correct the amplitude spectra of ultrasonic echoes got in different temperature and pressure environmeots. The theoretical simulation and experimental results prove that the approach is simple, effective and practical.
基金Sponsored by National Natural Science Foundation of China(51474092)Iron and Steel Joint Funds of Hebei Province of China(E2015209243)Innovation Team Leading Talent in Universities Cultivation Plan of Hebei Province of China(LJRC007)
文摘The compressive behaviors of medium carbon steel specimens were investigated over a wide range of tem- peratures and strain rates using a Gleeble-3500 thermo-simulation machine. The results show that the flow stress in- creased with strain at first, and then gradually decreased after reaching a peak value. The flow stress softening rate at a high strain rate was larger than that at a low strain rate. The effects of deformation heating and friction on flow stress were analyzed. A new friction correction method, wherein the effect of strain on frictional coefficient was con- sidered, was established here. The stresses revised by the new method deviated from the measured stresses with in- creasing strain. Meanwhile, the apparent frictional coefficient variation law with strain was obtained. The frictional coefficient increased as the strain increased and then slightly decreased after maintaining a constant value. The stress was corrected by considering deformation heating. The accuracy of the temperature correction method was verified using a special experiment. The results of the verification experiment show that the temperature correction method exhibited a good accuracy in calculating the variation of stress caused by deformation heating. A constitutive model considering strain was proposed here to describe the deformation behaviors. Compared with experimental data, the modified constitutive model exhibited a good accuracy as to constitutive correlation.