Alternating current heating techniques for lithium-ion batteries in electric vehicles:Recent advances and perspectives

The significant decrease in battery performance at low temperatures is one of the critical challenges that electric vehicles(EVs)face,thereby affecting the penetration rate in cold regions.Alternating current(AC)heating has attracted widespread attention due to its low energy consumption and uniform heating advantages.This paper introduces the recent advances in AC heating from the perspective of practical EV applications.First,the performance degradation of EVs in low-temperature environments is introduced briefly.The concept of AC heating and its research methods are provided.Then,the effects of various AC heating methods on battery heating performance are reviewed.Based on existing studies,the main factors that affect AC heating performance are analyzed.Moreover,various heating circuits based on EVs are categorized,and their cost,size,complexity,efficiency,reliability,and heating rate are elaborated and compared.The evolution of AC heaters is presented,and the heaters used in brand vehicles are sorted out.Finally,the perspectives and challenges of AC heating are discussed.This paper can guide the selection of heater implementation methods and the optimization of heating effects for future EV applications.

Finite-time Stability of Heating Furnace Temperature Control System

A finite-time stabilization controller for the heating furnace temperature control system is proposed.Based on the extended Lyapunov finite-time stability theory and power integral method,a finite-time stable condition of the heating furnace temperature control system is given.The temperature of the heating furnace is directed by the finite-time stabilization controller to make it stable in finite time.And the quality and quantity of slabs is improved.The simulation example is presented to illustrate the applicability of the developed results.

Ohmic Heating for Tofu Making—A Pilot Study

The aim of this study is to explore the relationship between temperature and electrical conductivity of soya milk under ohmic heating in tofu making. The soya milk of 10 Brix was heated to a steady temperature of 90?C. The applied voltage was increased and the temperature rising rate was investigated for adequate heating profiles in tofu making. Experimental results showed that the electrical conductivity of soya milk is proportional to the heating time. The temperature rising rate was increased from 1.46?C to 3.82?C/min as a result of increased voltage. Hence ohmic heating could be an efficient, convenient heating measure in tofu making.

Piezoelectric Power Harvesting Process via Phase Changes of Low-Boiling-Point Medium Together with Water for Recovering Low-Temperature Heats

Low-temperature thermal energy conversions down to exergy zero to electric power must contribute energy sustainability. That is to say, reinforcements of power harvesting technologies from extremely low temperatures less than 373 K might be at least one of minimum roles for the current generations. Then, piezoelectric power harvesting process for recovering low-temperature heats was invented by using a unique biphasic operating medium of an underlying water-insoluble/low-boiling-point medium (i.e. NOVEC manufactured by 3M Japan Ltd.) in small quantity and upper-layered water in large quantity. The higher piezoelectric power harvesting densities were naturally revealed with an increase in heating temperatures. Excessive cooling of the operating medium deteriorated the power harvesting efficiency. The denser operating medium was surpassingly helpful to the higher piezoelectric power harvesting density. Concretely, only about 5% density increase of main operating medium (i.e. water with dissolving alum at 0.10 mol/dm3) came to the champion piezoelectric power harvesting density of 92.6 pW/dm2 in this study, which was about 1.4 times compared to that with the original biphasic medium of pure water together with a small quantity of NOVEC.

Influences of Urban Temperature on the Electricity Consumption of Shanghai

By using data of daily electricity consumption and temperature for the period 2003–2007 in Shanghai, the variation of energy consumption and the correlations between energy consumption and temperature are analyzed. The results indicate that winter and summer are the two peak seasons of energy consumption due to the urban residential heating and cooling demand. The base temperature of electricity and daily temperature is 10℃ in winter and 22℃ in summer respectively. When the outdoor temperature is below 10℃, the heating demand becomes obvious, and with over 22℃ the cooling demand. The spatial distribution of cooling degree-days(CDD) and heating degree-days(HDD) clearly shows urbanization effects. By the influence of urbanization the central city experiences greater CDD in summer and lower HDD in winter. The projected temperature for 2011–2050 implies a significant increase in CDD and a decrease in HDD. This may have implications on the future energy demand if the current energy consumption pattern does not change.

A Compound Cycle for Power Generation by Utilizing Residual Heat of Flue Gas in Electric Steelmaking Process

Electric furnace short process steelmaking is one of the most important steelmaking methods in the world today, and the waste heat recovery potential of electric furnace flue gas is huge.?The research on the recovery of electric furnace flue gas waste heat is of great significance. In order to make better use of this part of the heat,?in this paper, a compound cycle of nitrogen Brayton cycle as a first-order cycle and toluene transcritical Rankine cycle as a second-order cycle is proposed to recover waste heat from furnace flue gas in steelmaking process for power generation. A mathematical model was established with the net output power as the objective function and the initial expansion pressure, the final expansion pressure, the initial expansion temperature and the initial pressure of the second cycle as the independent variables. The effect of multivariate on the net output power of the waste heat power generation cycle is studied, and then, the optimal parameters of the compound cycle are determined. The results show that under the general electric furnace steelmaking process, the power generation efficiency of this new cycle can be increased by 21.02% compared with the conventional cycle.

Feasibility Demonstrations of Liquid Turbine Power Generator Driven by Low Temperature Heats

Lower temperature waste heats less than 373 K have strong potentials to supply additional energies because of their enormous quantities and ubiquity. Accordingly, reinforcement of power generations harvesting low temperature heats is one of the urgent tasks for the current generation in order to accomplish energy sustainability in the coming decades. In this study, a liquid turbine power generator driven by lower temperature heats below 373 K was proposed in the aim of expanding selectable options for harvesting low temperature waste heats less than 373 K. The proposing system was so simply that it was mainly composed of a liquid turbine, a liquid container with a biphasic medium of water and an underlying water-insoluble low-boiling-point medium in a liquid phase, a heating section for vaporization of the liquid and a cooling section for entropy discharge outside the system. Assumed power generating steps via the proposing liquid turbine power generator were as follows: step 1: the underlying low-boiling-point medium in a liquid phase was vaporized, step 2: the surfacing vapor bubbles of low-boiling-point medium accompanied the biphasic medium in their wakes, step 3: such high momentum flux by step 2 rotated the liquid turbine (i.e. power generation), step 4: the surfacing low-boiling-point medium vapor was gradually condensed into droplets, step 5: the low-boiling-point medium droplets were submerged to the underlying medium in a liquid phase. Experiments with a prototype liquid turbine power generator proved power generations in accordance with the assumed steps at a little higher than ordinary temperature. Increasing output voltage could be obtained with an increase in the cooling temperature among tested ranging from 294 to 296 K in contrast to normal thermal engines. Further improvements of the direct current voltage from the proposing liquid turbine power generator can be expected by means of far more vigorous multiphase flow induced by adding solid powders and theoretical optimizations of heat and mass transfers.

Temperature measurement based on radialization power for micro-hotplate

A novel method to measure the temperature on the surface of micro-hotplate was presented. The tiny fiber probe and the optical power meter were employed to measure the sample radialization power. By means of comparing the relationship between the radialization power and the temperature, sample surface temperature can be discerned accurately. Such an approach has provided more accuracy than traditional temperature measurements. The experimental result based on this method is quite similar to that of simulation by the finite element analysis (FEA) software of Ansys in theory. This measurement is very useful for measuring temperature for these micro samples prone to be untouchable.

Preparation of Self-limiting Heating Cables with Excellent Processability, Mechanical Properties and PTC Effect via Thermal and Electrical Treatments

Polymer/conductive filler composites have been widely used for the preparation of self-limiting heating cables with the positive temperature coefficient (PTC) effect. The control of conductive filler distribution and network in polymer matrix is the most critical for performance of PTC materials. In order to compensate for the destruction of the filler network structure caused by strong shearing during processing, an excessive conductive filler content is usually added into the polymer matrix, which in turn sacrifices its processability and mechanical properties. In this work, a facile post-treatment of the as-extruded cable, including thermal and electrical treatment to produce high-density polyethylene (HDPE)/carbon black (CB) cable with excellent PTC effect, is developed. It is found for the as-extruded sample, the strong shearing makes the CB particles disperse uniformly in HDPE matrix, and 25 wt% CB is needed for the formation of conductive paths. For the thermal-treated sample, a gradually aggregated CB filler structure is observed, which leads to the improvement of PTC effect and the notable reduction of CB content to 20 wt%. It is very interesting to see that for the sample with combined thermal and electrical treatment, CB particles are agglomerated and oriented along the electric field direction to create substantial conductive paths, which leads to a further decrease of CB content down to 15 wt%. In this way, self-limiting heating cables with excellent processability, mechanical properties and PTC effect have simultaneously been achieved.

Coordinated control strategy for wind power accommodation based on electric heat storage and pumped storage

To solve the severe problem of wind power curtailment in the winter heating period caused by ＂power determined by heat＂ operation constraint of cogeneration units, this paper analyzes thermoelectric load, wind power output distribution and fluctuation characteristics at different time scales, and finally proposes a two level coordinated control strategy based on electric heat storage and pumped storage. The optimization target of the first level coordinated control is the lowest operation cost and the largest wind power utilization rate. Based on prediction of thermoelectric load and wind power, the operation economy of the system and wind power accommodation level are improved with the cooperation of electric heat storage and pumped storage in regulation capacity. The second level coordinated control stabilizes wind power real time fluctuations by cooperating electric heat storage and pumped storage in control speed. The example results of actual wind farms in Jiuquan, Gansu verifies the feasibility and effectiveness of the proposed coordinated control strategy.

Generation of Electric Power from Domestic Cooking System

This study work related with floating of an idea about conversion of reclaimed thermal energy from domestic cooking system into the electrical power. There were different techniques in use worldwide for harnessing the energy into the appropriate useful work and also to create efficient system for the energy conversion process. The ignorance in this regard might be due to the reason that this wastage did not cost too much for a single home on per day or per month basis, but it could be a ample amount of cost if integrated this loss for a whole city or on yearly bases for a single home. The idea in this work depended upon the recovery of waste heat from Pressure Cookers used in the houses for the domestic cooking purposes, and optimized the reclaimed thermal energy for the conversion into electric power. This research work related with losses of energy discussed and analyzed on the basis of thermo dynamically regarding (a) the wastage of thermal energy escaped through the system due to the spreading of exhaust vapors and taking away significant amount of thermal energy;(b) losses of enthalpy through the dissipate steam;(c) heat losses in the tubing from the Pressure Cooker to the turbine;(d) electric power produces from the system. In this work, new methods were advised, in order to reduce the losses of thermal energy from the system. It would open the venue for researchers to promote this new idea in near future.

Heat and power load dispatching considering energy storage of district heating system and electric boilers

As one of promising clean and low-emission energy, wind power is being rapidly developed in China.However, it faces serious problem of wind curtailment,particularly in northeast China, where combined heat and power(CHP) units cover a large proportion of the district heat supply. Due to the inherent strong coupling between the power and the heat load, the operational flexibility of CHP units is severely restricted in winter to meet the heat supply demand, which imparts considerable stress on the wind power connection to the grid. To promote the integration of wind power and enhance the flexibility of CHP units, this paper presented a method of heat and power load dispatching by exploring the energy storage ability of electric heating boilers and district heating systems. The optimization results indicate that the proposed method can integrate additional wind power into the grid and reduce the coal consumption of CHP units over the optimized period. Furthermore, the thermal inertia of a district heating system is found to contribute more to the reduction of coal consumption, whereas the electric heating boilers contribute to lower wind curtailment.

Constant temperature control of tundish induction heating power supply for metallurgical manufacturing

The tundish induction heating power supply(TIHPS)is one of the most important equipment in the continuous casting process for metallurgical manufacturing.Specially,the constant temperature control is greatly significant for metallurgical manufacturing.In terms of the relationship between TIH load temperature and output power of TIHPS,the constant temperature control can be realized by power control.In this paper,a TIHPS structure with three-phase PWM rectifiers and full-bridge cascaded inverter is proposed.Besides,an input harmonic current blocking strategy and a load voltage feedforward control are also proposed to realize constant temperature control.To meet the requirement of the system,controller parameters are designed properly.Experiments are con?ducted to validate the feasibility and effectiveness of the proposed TIHPS topology and the control methods.

A review of low-temperature heat recovery technologies for industry processes

The amount of low-temperature heat generated in industrial processes is high,but recycling is limited due to low grade and low recycling efficiency,which is one of the reasons for low energy efficiency.It implies that there is a great potential for low-temperature heat recovery and utilization.This article provided a detailed review of recent advances in the development of low-temperature thermal upgrades,power generation,refrigeration,and thermal energy storage.The detailed description will be given from the aspects of system structure improvement,work medium improvement,and thermodynamic and economic performance evaluation.It also pointed out the development bottlenecks and future development trends of various technologies.The low-temperature heat combined utilization technology can recover waste heat in an all-round and effective manner,and has great development prospects.

Influence of heat loss through probe electrical leads on thermal conductivity measurement with TPS method

The transient plane source(TPS)method is developed recently to measure the thermal conductivity of materials.In the measurement,the heating power is influenced by the heat which is transferred via the probe electrical leads.This fact further influences the measurement accuracy of thermal conductivity.To solve this problem,the influence of heat loss through the electrical leads on the heating power is studied theoretically.The mathematical formula of heat loss is deduced,and the corresponding correction model is presented.A series of measurement experiments on different materials have been conducted by using the hot disk thermal constant analyzer.The results show that the influence of the heat loss on the measurement is sensitive to different test materials and probes with different sizes.When the thermal conductivity of the material is greater than 0.2 W/(m·K),the influence of the heat loss is less than 0.16%,which can be ignored.As to the lower thermal conductivity materials,it is necessary to compensate the heat loss through the electrical leads,and the accuracy of thermal conductivity measurement can be effectively improved.

Spatiotemporal variation and mechanisms of temperature inversion in the Bay of Bengal and the eastern equatorial Indian Ocean

In the northern Bay of Bengal,the existence of intense temperature inversion during winter is a widely accepted phenomenon.However,occurrences of temperature inversion during other seasons and the spatial distribution within and adjacent to the Bay of Bengal are not well understood.In this study,a higher resolution spatiotemporal variation of temperature inversion and its mechanisms are examined with mixed layer heat and salt budget analysis utilizing long-term Argo(2004 to 2020)and RAMA(2007 to 2020)profiles data in the Bay of Bengal and eastern equatorial Indian Ocean(EEIO).Temperature inversion exists(17.5%of the total 39293 Argo and 51.6%of the 28894 RAMA profiles)throughout the year in the entire study area.It shows strong seasonal variation,with the highest occurrences in winter and the lowest in spring.Besides winter inversion in the northern Bay of Bengal,two other regions with frequent temperature inversion are identified in this study for the first time:the northeastern part of the Bay of Bengal and the eastern part of the EEIO during summer and autumn.Driving processes of temperature inversion for different subregions are revealed in the current study.Penetration of heat(mean~25 W/m;)below the haline-stratified shallow mixed layer leads to a relatively warmer subsurface layer along with the simultaneous cooling tendency in mixed layer,which controls more occurrence of temperature inversion in the northern Bay of Bengal throughout the year.Comparatively lower cooling tendency due to net surface heat loss and higher mixed layer salinity leaves the southern part of the bay less supportive to the formation of temperature inversion than the northern bay.In the EEIO,slightly cooling tendency in the mixed layer along with the subduction of warm-salty Arabian Sea water beneath the cold-fresher Bay of Bengal water,and downwelling of thermocline creates a favorable environment for forming temperature inversion mainly during summer and autumn.Deeper isothermal layer depth,and thicker barrier layer thickness intensify the temperature inversion both in the Bay of Bengal and EEIO.

Energetic, economic, and environmental analysis of solid oxide fuel cell-based combined cooling, heating, and power system for cancer care hospital

In this study,energetic,economic,and environmental analysis of solid oxide fuel cell-based combined cooling,heating,and power(SOFC-CCHP)system is proposed for a cancer care hospital building.The energy required for the hospital power,cooling,and heating demands was obtained based on real and detailed field data,which could serve as a reference for future works in the field.These data with a 3D model for the hospital building are constructed and created in eQUEST software to precisely calculate the energy demands of the existing system(baseline case).Then,energetic,economic,and environmental models were developed to compare and assess the performance of the proposed SOFC-CCHP system.The results show that the proposed system can cover about 49% to 77% of the power demand of the hospital with an overall efficiency of 78.3%.Also,the results show that the levelized cost of electricity of the system and its payback period at the designed capacity of the SOFC is 0.087S/kWh and 10 years,respectively.Furthermore,compared to the baseline system of the hospital,the SOFC-CCHP reduces the CO_(2) emission by 89% over the year.The sensitivity analysis showed that a maximum SOFC efficiency of 52%and overall efficiency of 80%are achieved at cell operating temperature of 1027℃ and fuel utilization factor of 0.85.

Thermal Design for 5 Watt Power LED

With the consideration of the thermal management and heat sink requirements,a cooling device is designed and the thermal resistance of this device is calculated with a single 5 W power LED.The thermal design of a single 5 W power LED is reasonable,effective and the result has been simulated.This design also instruct other power LEDs' thermal design.Provided is a reliable and effective method for the design of power LED illumination lamps and lanterns.

Heat Flux Analysis in Electrical Transformers through Integral Operators of Mechanics

Considering the continuous functioning of a power transformer under charge of high capacity of 50 MVA, predicted studies are proposed to be performed of their thermal behavior under perma nent and variable regimens of flow of charge, using noninvasive methods based in integral trans forms that measure and determine parameters of geometrical, analytical and physical type of the transformer. In before works, we have studied a basic geometry of a winding composed of high and low voltage sections with a uniform heat generation and heat convection boundary conditions. The heat conduction equation representing the phenomena of heat generation in a cylindrical structure was solved by using an integral transform. In this sense, this new study considers the basic geometry composed of a three cylindrical windings (high and low voltage turns) and a rec tangular core. Thus it is proposed to solve magnetic flow equations using integral transforms (Han kel transforms and Bessel integrals) in order to obtain the heat source distribution in the core due to the magnetization currents which are developed in function of the magnetic field flow equations. Based on this, it is proposed as a second step to use this heat source distribution to obtain the corresponding temperature distribution in the core by solving the cylindrical heat conduction equation for the core (cylindrical). Bearing this in mind, it is proposed finally to solve the 3D cylindrical heat conduction equation for the one winding using the calculated heat convection coefficients, the conductivity of the winding, behavior of the mineral oil and the non uniform winding heat generation predicted in recent researches. This equation will be solved by using integral methods (Radon, Hankel and Fourier transforms). This methodology will be useful to establish a new design of a power transformer based on the values of their integrals and the results that throw the inverse methods for this case. Finally if possible we will use the programs of Fluent and/or Phoenics for the validation of functional proposed models of prediction and prevention of heat flow and charge based on the obtained results.