The power module of the Insulated Gate Bipolar Transistor(IGBT)is the core component of the traction transmission system of high-speed trains.The module's junction temperature is a critical factor in determining d...The power module of the Insulated Gate Bipolar Transistor(IGBT)is the core component of the traction transmission system of high-speed trains.The module's junction temperature is a critical factor in determining device reliability.Existing temperature monitoring methods based on the electro-thermal coupling model have limitations,such as ignoring device interactions and high computational complexity.To address these issues,an analysis of the parameters influencing IGBT failure is conducted,and a temperature monitoring method based on the Macro-Micro Attention Long Short-Term Memory(MMALSTM)recursive neural network is proposed,which takes the forward voltage drop and collector current as features.Compared with the traditional electricalthermal coupling model method,it requires fewer monitoring parameters and eliminates the complex loss calculation and equivalent thermal resistance network establishment process.The simulation model of a highspeed train traction system has been established to explore the accuracy and efficiency of MMALSTM-based prediction methods for IGBT power module junction temperature.The simulation outcomes,which deviate only 3.2% from the theoretical calculation results of the electric-thermal coupling model,confirm the reliability of this approach for predicting the temperature of IGBT power modules.展开更多
High purity SiC crystal was used as a passive monitor to measure neutron irradiation temperature in the 49-2 research reactor.The SiC monitors were irradiated with fast neutrons at elevated temperatures to 3.2×10...High purity SiC crystal was used as a passive monitor to measure neutron irradiation temperature in the 49-2 research reactor.The SiC monitors were irradiated with fast neutrons at elevated temperatures to 3.2×10^(20)n/cm^(2).The isochronal and isothermal annealing behaviors of the irradiated SiC were investigated by x-ray diffraction and four-point probe techniques.Invisible point defects and defect clusters are found to be the dominating defect types in the neutron-irradiated SiC.The amount of defect recovery in SiC reaches a maximum value after isothermal annealing for 30 min.Based on the annealing temperature dependences of both lattice swelling and material resistivity,the irradiation temperature of the SiC monitors is determined to be~410℃,which is much higher than the thermocouple temperature of 275℃ recorded during neutron irradiation.The possible reasons for the difference are carefully discussed.展开更多
High-temperature electromagnetic(EM) protection materials integrated of multiple EM protection mechanisms and functions are regarded as desirable candidates for solving EM interference over a wide temperature range.In...High-temperature electromagnetic(EM) protection materials integrated of multiple EM protection mechanisms and functions are regarded as desirable candidates for solving EM interference over a wide temperature range.In this work,a novel microwave modulator is fabricated by introducing carbonyl iron particles(CIP)/resin into channels of carbonized wood(C-wood).Innovatively,the spaced arrangement of two microwave absorbents not only achieves a synergistic enhancement of magnetic and dielectric losses,but also breaks the translational invariance of EM characteristics in the horizontal direction to obtain multiple phase discontinuities in the frequency range of 8.2-18.0 GHz achieving modulation of reflected wave radiation direction.Accordingly,CIP/C-wood microwave modulator demonstrates the maximum effective bandwidth of 5.2 GHz and the maximum EM protection efficiency over 97% with a thickness of only 1.5 mm in the temperature range 298-673 K.Besides,CIP/C-wood microwave modulator shows stable and low thermal conductivities,as well as monotonic electrical conductivity-temperature characteristics,therefore it can also achieve thermal infrared stealth and working temperature monitoring in wide temperature ranges.This work provides an inspiration for the design of high-temperature EM protection materials with multiple EM protection mechanisms and functions.展开更多
We report a fiber Bragg grating(FBG)-based sensor for the simultaneous measurement of a train bearing’s vibration and temperature. A pre-stretched optical fiber with an FBG and a mass is designed for axial vibratio...We report a fiber Bragg grating(FBG)-based sensor for the simultaneous measurement of a train bearing’s vibration and temperature. A pre-stretched optical fiber with an FBG and a mass is designed for axial vibration sensing. Another multiplexed FBG is embedded in a selected copper-based alloy with a high thermal expansion to detect temperature. Experiments show that the sensor possesses a high resonant frequency of 970 Hz, an acceleration sensitivity of 27.28 pm/g, and a high temperature sensitivity of 35.165 pm/℃. A resonant excitation test is also carried out that demonstrates the robustness and reliability of the sensor.展开更多
Electrical sensing systems, such as those involving eutectic salt, are mostly used in connection to leakage from existing airborne high-temperature air-conducting pipelines. Such complex structured systems are suscept...Electrical sensing systems, such as those involving eutectic salt, are mostly used in connection to leakage from existing airborne high-temperature air-conducting pipelines. Such complex structured systems are susceptible to external interferences and, thus, cannot meet the increasingly strict monitoring needs of a complex air-conducting pipeline system of an aircraft. In view of this point, this paper studies an alternative sensor system based on a dense array fiber grating. To obtain a compact and light-weight airborne signal processing system, a field programmable gate array is used as the main control core that controls the output of the light source. The functions of pulse modulation, analog-to-digital conversion,data buffering and transmission are integrated into a single system, while the linear sensing monitoring is obtained by detecting the time-division and wavelength-division wavelength drift signals of the fiber Bragg grating array. Our experiments show that the spatial resolution of the linear sensing system approaches 5 cm, the temperature measurement accuracy reaches 2 ℃, the temperature measurement range is between 0–250 ℃, and the response time is within 4 s. Compared with the existing electrical monitoring systems, various monitoring indicators have been greatly improved and have broad application prospects.展开更多
By combining cryogenic cryotherapy and high-temperature radiofrequency therapy,multimodal ablation generates a rapidly changing temperature field in tissue by heating after pre-freezing.This method completely breaks t...By combining cryogenic cryotherapy and high-temperature radiofrequency therapy,multimodal ablation generates a rapidly changing temperature field in tissue by heating after pre-freezing.This method completely breaks tumour cells and releases a large amount of active antigen.Compared with the traditional single modality,the thermal physical ablation method has been shown to have a greater therapeutic effect,but it presents challenges in terms of precise monitoring and rapid control of the temperature during the treatment process.To solve this problem,we propose a temperature control system design utilizing aspects of probe sensing,real-time software and hardware signal interfaces,and dynamic compensation control strategies to accurately monitor the temperature changes during multimodal ablation treatment.The results show that the design system has millisecond-level high-speed control capability,an accuracy of 0.5℃,and the dynamic response time is less than 0.1 s.Furthermore,the temperature fluctuation in in vivo experiments is less than 0.5℃.展开更多
Purpose–This study aims to improve the availability of regenerative braking for urban metro vehicles by introducing a sensorless operational temperature estimation method for the braking resistor(BR)onboard the vehic...Purpose–This study aims to improve the availability of regenerative braking for urban metro vehicles by introducing a sensorless operational temperature estimation method for the braking resistor(BR)onboard the vehicle,which overcomes the vulnerability of having conventional temperature sensor.Design/methodology/approach–In this study,the energy model based sensorless estimation method is developed.By analyzing the structure and the convection dissipation process of the BR onboard the vehicle,the energy-based operational temperature model of the BR and its cooling domain is established.By adopting Newton’s law of cooling and the law of conservation of energy,the energy and temperature dynamic of the BR can be stated.To minimize the use of all kinds of sensors(including both thermal and electrical),a novel regenerative braking power calculation method is proposed,which involves only the voltage of DC traction network and the duty cycle of the chopping circuit;both of them are available for the traction control unit(TCU)of the vehicle.By utilizing a real-time iterative calculation and updating the parameter of the energy model,the operational temperature of the BR can be obtained and monitored in a sensorless manner.Findings–In this study,a sensorless estimation/monitoring method of the operational temperature of BR is proposed.The results show that it is possible to utilize the existing electrical sensors that is mandatory for the traction unit’s operation to estimate the operational temperature of BR,instead of adding dedicated thermal sensors.The results also validate the effectiveness of the proposal is acceptable for the engineering practical.Originality/value–The proposal of this study provides novel concepts for the sensorless operational temperature monitoring of BR onboard rolling stocks.The proposed method only involves quasi-global electrical variable and the internal control signal within the TCU.展开更多
Objective:To make and study computed system for external cardiac massage,monitor of heart and body temperature and observe its clinical effect.Method:The system was made and applied.Result:The effect of system was obv...Objective:To make and study computed system for external cardiac massage,monitor of heart and body temperature and observe its clinical effect.Method:The system was made and applied.Result:The effect of system was obvious.Conclusion: The system was an effective clinical equipment in treatment of patient with cardiac arrest.展开更多
This study presents the long-term temperature monitoring in the Russian Altai Mountains. In contrast to the Mongolian and Chinese parts, the modern temperature regime of the Russian Altai remains unclear. The complexi...This study presents the long-term temperature monitoring in the Russian Altai Mountains. In contrast to the Mongolian and Chinese parts, the modern temperature regime of the Russian Altai remains unclear. The complexity of a comprehensive understanding of permafrost conditions in the Russian Altai is related to the high dissection of the terrain, the paucity of the latest observational data, and the sparse population of permafrost areas. The general objective of this study is to determine the temperature regime on the surface,in the active layer, and in the zero annual amplitude(ZAA) layer, based on the known patterns of permafrost distribution in the region. Using automatic measuring equipment(loggers), we obtained information on the temperature of frozen and thawed ground within the altitudes from 1484 to 2879 m a. s. l. during the period from 2014 to 2020.An array of 15 loggers determined the temperature regime of bare and vegetated areas within watersheds,slopes, and valleys. N-factor parameters and surface temperature are similar to those in the Mongolian Altai, but the mean annual ground temperature at the depth of 1 m has a wide range of fluctuations(more than 32℃) based on research results, and we allocated it into three groups based on altitudinal zonality. Snow cover has a strong influence on the temperature regime, but the determination of the fine-scale variability requires additional study.Ground temperature regime during the observation period remained stable, but continued monitoring allows a more detailed assessment of the response to climatic changes.展开更多
Long-term measurements of air, near-surface (soil) and ground temperatures that were collected between 1994 and 2013 at the drill site of the Geothermal Climate Change Observatory (Prague) were analyzed to understand ...Long-term measurements of air, near-surface (soil) and ground temperatures that were collected between 1994 and 2013 at the drill site of the Geothermal Climate Change Observatory (Prague) were analyzed to understand the relationship between these variables and to reveal the mechanisms of heat transport at the land-atmosphere boundary layer. The 2D Thermal Orbit (TO) method was applied to detect regularities that were hidden in noisy and highly variable temperature time series. The results showed that the temperatures at shallow depths were affected by surface air temperature (SAT) variations on seasonal and annual time scales and could be regarded as an accurate proxy for low frequency temperature variations at the Earth’s surface. Only low-frequency/ high-amplitude surface temperature variations penetrate into the subsurface because of strong damping and the filtering effect of the ground surface. The borehole temperatures have good potential to capture temperature variations (periodicities) over long time scales that cannot be detected in the SAT series themselves because of the interference of higher frequency noise. The TO technique is a useful and powerful tool to quickly obtain diagnostics of the presence of long periodicities in borehole temperature time series.展开更多
Environmental and geomorphological processes in the mountainous areas of Eastern Siberia is strongly conditioned by the thermal state of permafrost(permanently frozen ground).However,the scarce data about climate and ...Environmental and geomorphological processes in the mountainous areas of Eastern Siberia is strongly conditioned by the thermal state of permafrost(permanently frozen ground).However,the scarce data about climate and weak of permafrost study have led to the unclarity of mountain permafrost condition in this region.The increase in the mean annual air temperature over the past 50 years in the northeastern Siberia by various estimates is from 1.1℃to 3.3℃.So far,almost no information is available on the permafrost response to climatic changes in the region.The Kolyma Route(around 2000 km length),connecting Yakutsk and Magadan that crosses 5 climatic types and more than 10 permafrost landscapes,so it seems a suitable path for establishing basic(reference)monitoring sites.From 12 target boreholes,on the first stage 5 boreholes up to 30 m in depth were drilled and instrumented for measuring temperature at sites adjacent to weather stations in the Verkhoyansk Range from 283 to 1288 m a.s.l.Here we present conception,purpose,and methods for permafrost study project with first preliminary results from the highest weather station of the East Siberia Mountain.The following research about geophysical investigations,permafrost landscape description,mapping and spatial modelling,numerical computing,physical modelling of permafrost thickness might be initiated by the Eastern Siberia Permafrost Transect(ESPT)-project.展开更多
A junction temperature monitoring method has been presented based on the on-state voltage at high currents.With a simplified physical model,this method mapped the relationship between junction temperature and on-state...A junction temperature monitoring method has been presented based on the on-state voltage at high currents.With a simplified physical model,this method mapped the relationship between junction temperature and on-state voltage.The tough calibration and signal sensing issues are solved.Verified by body-diode voltage detecting method,the presented method shows a good performance and high accuracy,in the meantime,it would not change the modulation strategy and topology of the converter.展开更多
The authors would like to apologize for some mistakes in the letter on Chinese Optics Letters vol. 12, no. 11, page 111701 and wish to make the corrections described below:
The temperature monitoring of treated cancer cells is critical in photothermal therapy.Current methods of detecting intracellular temperatures have low accuracy and poor spatial resolution,which limits their applicati...The temperature monitoring of treated cancer cells is critical in photothermal therapy.Current methods of detecting intracellular temperatures have low accuracy and poor spatial resolution,which limits their application to photothermal therapy.Herein,a strategy for targeted recognition and selective capture of MCF-7 breast cancer cells based on fluorescent polymer poly(N-isopropylacrylamide-benzoxadiazole-2-vinyl-4,4-dimethyl azlactone,PNMV)and modified gold nanobipyramids(Au NBPs-PNMV)was developed for temperature sensing during photothermal therapy.A mucin-1 protein aptamer(Apt)was applied to selectively target mucin-1 protein overexpressed on the surfaces of the MCF-7 cells,which can reduce interference by affinity interaction between the Apt and proteins.During photothermal therapy,the significant Au NBPs photothermal effect increases the fluorescence intensity of PNMV with temperature.Irradiation of MCF-7 cells cultured with Au NBPs-PNMV@Apt by an 808 nm laser increases the temperature of the system,while the cells can be inactivated because of the remarkable Au NBPs-PNMV@Apt photothermal effect.The results indicate that variation in the fluorescence of Au NBPs-PNMV@Apt can be applied as thermometers to monitor the intracellular effect of photothermal therapy.展开更多
The ability to precisely monitor temperature at a high resolution is an important task,particularly in terms of safety.Inspired by natural thermosensitive transient receptor potential cation channels,we developed a te...The ability to precisely monitor temperature at a high resolution is an important task,particularly in terms of safety.Inspired by natural thermosensitive transient receptor potential cation channels,we developed a temperature sensor based on thermaldriven ionic charge separation.To mimic the function of nature,an ionic covalent organic frameworkbased nanofluidic membrane was fabricated.By engineering the membrane to separate two electrolyte solutions,the temperature difference across the membrane can synchronously induce a potential.The high charge density and narrow channel size render extraordinary permselectivity to the membrane,thus offering a thermosensation selectivity of up to 1.25 mV K^(−1),superior to that of any known natural system.Additionally,the generated potential is linearly related to the introduced temperature gradient,thus allowing for precise detection.With these attributes,an alarm device with high thermosensation sensitivity was constructed,demonstrating great promise for environmental temperature monitoring.展开更多
The aim of this study is to achieve online monitoring of the junction temperature of double-sided-cooling insulated gate bipolar transistor(IGBT)power modules by using the on-state voltage under a high current to maxi...The aim of this study is to achieve online monitoring of the junction temperature of double-sided-cooling insulated gate bipolar transistor(IGBT)power modules by using the on-state voltage under a high current to maximize the utilization of IGBT power chips.Online junction temperature measurement plays an important role in improving the reliability of the inverter with IGBT,increasing the power density of the motor controller of electric vehicles,and reducing the cost of electric vehicles.展开更多
The hybrid structure of a power-module package is summarized and classified.Basic and extended planar wire-bond designs are analyzed and compared with regular wire-bond modules and planar modules,respectively.The auto...The hybrid structure of a power-module package is summarized and classified.Basic and extended planar wire-bond designs are analyzed and compared with regular wire-bond modules and planar modules,respectively.The automatic layout method can improve the electrical and thermal performance of hybrid structures.A state-of-the-art hybrid structure is introduced,and suggestions for alleviating the current and temperature imbalances for future designs are provided.展开更多
In this paper,an offline evaluation method for the cooling capability of three-phase insulated-gate bipolar transistor(IGBT)inverters is presented,which can better emulate real working conditions.With a properly desig...In this paper,an offline evaluation method for the cooling capability of three-phase insulated-gate bipolar transistor(IGBT)inverters is presented,which can better emulate real working conditions.With a properly designed sudden-stop control sequence,the conventional junction temperature monitoring method at a low current is used to calculate the junction temperature before the sudden stop of an inverter.This can solve the challenging switching loss calculation issue in conventional methods.Finally,the feasibility,control sequence,and electrical behaviors of the proposed method are validated through experimental tests.展开更多
基金supported by the Science and Technology Project of the Headquarters of the State Grid Corporation of China(52199922001U).
文摘The power module of the Insulated Gate Bipolar Transistor(IGBT)is the core component of the traction transmission system of high-speed trains.The module's junction temperature is a critical factor in determining device reliability.Existing temperature monitoring methods based on the electro-thermal coupling model have limitations,such as ignoring device interactions and high computational complexity.To address these issues,an analysis of the parameters influencing IGBT failure is conducted,and a temperature monitoring method based on the Macro-Micro Attention Long Short-Term Memory(MMALSTM)recursive neural network is proposed,which takes the forward voltage drop and collector current as features.Compared with the traditional electricalthermal coupling model method,it requires fewer monitoring parameters and eliminates the complex loss calculation and equivalent thermal resistance network establishment process.The simulation model of a highspeed train traction system has been established to explore the accuracy and efficiency of MMALSTM-based prediction methods for IGBT power module junction temperature.The simulation outcomes,which deviate only 3.2% from the theoretical calculation results of the electric-thermal coupling model,confirm the reliability of this approach for predicting the temperature of IGBT power modules.
文摘High purity SiC crystal was used as a passive monitor to measure neutron irradiation temperature in the 49-2 research reactor.The SiC monitors were irradiated with fast neutrons at elevated temperatures to 3.2×10^(20)n/cm^(2).The isochronal and isothermal annealing behaviors of the irradiated SiC were investigated by x-ray diffraction and four-point probe techniques.Invisible point defects and defect clusters are found to be the dominating defect types in the neutron-irradiated SiC.The amount of defect recovery in SiC reaches a maximum value after isothermal annealing for 30 min.Based on the annealing temperature dependences of both lattice swelling and material resistivity,the irradiation temperature of the SiC monitors is determined to be~410℃,which is much higher than the thermocouple temperature of 275℃ recorded during neutron irradiation.The possible reasons for the difference are carefully discussed.
基金Supported by Program for the National Natural Science Foundation of China(No.52071053,U1704253)the Fundamental Research Funds for the Central Universities(DUT20GF111)the China Postdoctoral Science Foundation(2020M670748,2020M680946).
文摘High-temperature electromagnetic(EM) protection materials integrated of multiple EM protection mechanisms and functions are regarded as desirable candidates for solving EM interference over a wide temperature range.In this work,a novel microwave modulator is fabricated by introducing carbonyl iron particles(CIP)/resin into channels of carbonized wood(C-wood).Innovatively,the spaced arrangement of two microwave absorbents not only achieves a synergistic enhancement of magnetic and dielectric losses,but also breaks the translational invariance of EM characteristics in the horizontal direction to obtain multiple phase discontinuities in the frequency range of 8.2-18.0 GHz achieving modulation of reflected wave radiation direction.Accordingly,CIP/C-wood microwave modulator demonstrates the maximum effective bandwidth of 5.2 GHz and the maximum EM protection efficiency over 97% with a thickness of only 1.5 mm in the temperature range 298-673 K.Besides,CIP/C-wood microwave modulator shows stable and low thermal conductivities,as well as monotonic electrical conductivity-temperature characteristics,therefore it can also achieve thermal infrared stealth and working temperature monitoring in wide temperature ranges.This work provides an inspiration for the design of high-temperature EM protection materials with multiple EM protection mechanisms and functions.
基金supported in part by the National Natural Science Foundation of China(Nos.51605348 and 51605344)in part by the Natural Science Foundation of the Hubei Province(No.2016CFB116)in part by the Open Research Fund of the Hubei Digital Manufacturing Key Laboratory(No.SZ1801)
文摘We report a fiber Bragg grating(FBG)-based sensor for the simultaneous measurement of a train bearing’s vibration and temperature. A pre-stretched optical fiber with an FBG and a mass is designed for axial vibration sensing. Another multiplexed FBG is embedded in a selected copper-based alloy with a high thermal expansion to detect temperature. Experiments show that the sensor possesses a high resonant frequency of 970 Hz, an acceleration sensitivity of 27.28 pm/g, and a high temperature sensitivity of 35.165 pm/℃. A resonant excitation test is also carried out that demonstrates the robustness and reliability of the sensor.
文摘Electrical sensing systems, such as those involving eutectic salt, are mostly used in connection to leakage from existing airborne high-temperature air-conducting pipelines. Such complex structured systems are susceptible to external interferences and, thus, cannot meet the increasingly strict monitoring needs of a complex air-conducting pipeline system of an aircraft. In view of this point, this paper studies an alternative sensor system based on a dense array fiber grating. To obtain a compact and light-weight airborne signal processing system, a field programmable gate array is used as the main control core that controls the output of the light source. The functions of pulse modulation, analog-to-digital conversion,data buffering and transmission are integrated into a single system, while the linear sensing monitoring is obtained by detecting the time-division and wavelength-division wavelength drift signals of the fiber Bragg grating array. Our experiments show that the spatial resolution of the linear sensing system approaches 5 cm, the temperature measurement accuracy reaches 2 ℃, the temperature measurement range is between 0–250 ℃, and the response time is within 4 s. Compared with the existing electrical monitoring systems, various monitoring indicators have been greatly improved and have broad application prospects.
基金the National Natural Science Foundation of China(No.51890892)。
文摘By combining cryogenic cryotherapy and high-temperature radiofrequency therapy,multimodal ablation generates a rapidly changing temperature field in tissue by heating after pre-freezing.This method completely breaks tumour cells and releases a large amount of active antigen.Compared with the traditional single modality,the thermal physical ablation method has been shown to have a greater therapeutic effect,but it presents challenges in terms of precise monitoring and rapid control of the temperature during the treatment process.To solve this problem,we propose a temperature control system design utilizing aspects of probe sensing,real-time software and hardware signal interfaces,and dynamic compensation control strategies to accurately monitor the temperature changes during multimodal ablation treatment.The results show that the design system has millisecond-level high-speed control capability,an accuracy of 0.5℃,and the dynamic response time is less than 0.1 s.Furthermore,the temperature fluctuation in in vivo experiments is less than 0.5℃.
基金supported by the Fund of China Academy of Railway Sciences Corporation Limited(2022YJ230)the Scientific Research Projects of China Association of Metros(CAMET-KY-2022039).
文摘Purpose–This study aims to improve the availability of regenerative braking for urban metro vehicles by introducing a sensorless operational temperature estimation method for the braking resistor(BR)onboard the vehicle,which overcomes the vulnerability of having conventional temperature sensor.Design/methodology/approach–In this study,the energy model based sensorless estimation method is developed.By analyzing the structure and the convection dissipation process of the BR onboard the vehicle,the energy-based operational temperature model of the BR and its cooling domain is established.By adopting Newton’s law of cooling and the law of conservation of energy,the energy and temperature dynamic of the BR can be stated.To minimize the use of all kinds of sensors(including both thermal and electrical),a novel regenerative braking power calculation method is proposed,which involves only the voltage of DC traction network and the duty cycle of the chopping circuit;both of them are available for the traction control unit(TCU)of the vehicle.By utilizing a real-time iterative calculation and updating the parameter of the energy model,the operational temperature of the BR can be obtained and monitored in a sensorless manner.Findings–In this study,a sensorless estimation/monitoring method of the operational temperature of BR is proposed.The results show that it is possible to utilize the existing electrical sensors that is mandatory for the traction unit’s operation to estimate the operational temperature of BR,instead of adding dedicated thermal sensors.The results also validate the effectiveness of the proposal is acceptable for the engineering practical.Originality/value–The proposal of this study provides novel concepts for the sensorless operational temperature monitoring of BR onboard rolling stocks.The proposed method only involves quasi-global electrical variable and the internal control signal within the TCU.
文摘Objective:To make and study computed system for external cardiac massage,monitor of heart and body temperature and observe its clinical effect.Method:The system was made and applied.Result:The effect of system was obvious.Conclusion: The system was an effective clinical equipment in treatment of patient with cardiac arrest.
基金supported by the Russian Science Fund under basic project No.IX.135.2“Geotemperature field and transformation of the permafrost zone of North Asia and mountainous regions of Central Asia”。
文摘This study presents the long-term temperature monitoring in the Russian Altai Mountains. In contrast to the Mongolian and Chinese parts, the modern temperature regime of the Russian Altai remains unclear. The complexity of a comprehensive understanding of permafrost conditions in the Russian Altai is related to the high dissection of the terrain, the paucity of the latest observational data, and the sparse population of permafrost areas. The general objective of this study is to determine the temperature regime on the surface,in the active layer, and in the zero annual amplitude(ZAA) layer, based on the known patterns of permafrost distribution in the region. Using automatic measuring equipment(loggers), we obtained information on the temperature of frozen and thawed ground within the altitudes from 1484 to 2879 m a. s. l. during the period from 2014 to 2020.An array of 15 loggers determined the temperature regime of bare and vegetated areas within watersheds,slopes, and valleys. N-factor parameters and surface temperature are similar to those in the Mongolian Altai, but the mean annual ground temperature at the depth of 1 m has a wide range of fluctuations(more than 32℃) based on research results, and we allocated it into three groups based on altitudinal zonality. Snow cover has a strong influence on the temperature regime, but the determination of the fine-scale variability requires additional study.Ground temperature regime during the observation period remained stable, but continued monitoring allows a more detailed assessment of the response to climatic changes.
文摘Long-term measurements of air, near-surface (soil) and ground temperatures that were collected between 1994 and 2013 at the drill site of the Geothermal Climate Change Observatory (Prague) were analyzed to understand the relationship between these variables and to reveal the mechanisms of heat transport at the land-atmosphere boundary layer. The 2D Thermal Orbit (TO) method was applied to detect regularities that were hidden in noisy and highly variable temperature time series. The results showed that the temperatures at shallow depths were affected by surface air temperature (SAT) variations on seasonal and annual time scales and could be regarded as an accurate proxy for low frequency temperature variations at the Earth’s surface. Only low-frequency/ high-amplitude surface temperature variations penetrate into the subsurface because of strong damping and the filtering effect of the ground surface. The borehole temperatures have good potential to capture temperature variations (periodicities) over long time scales that cannot be detected in the SAT series themselves because of the interference of higher frequency noise. The TO technique is a useful and powerful tool to quickly obtain diagnostics of the presence of long periodicities in borehole temperature time series.
基金supported by the Russian Science Foundation and Government of the Republic of Sakha(Yakutia)(project No 22-27-20073)。
文摘Environmental and geomorphological processes in the mountainous areas of Eastern Siberia is strongly conditioned by the thermal state of permafrost(permanently frozen ground).However,the scarce data about climate and weak of permafrost study have led to the unclarity of mountain permafrost condition in this region.The increase in the mean annual air temperature over the past 50 years in the northeastern Siberia by various estimates is from 1.1℃to 3.3℃.So far,almost no information is available on the permafrost response to climatic changes in the region.The Kolyma Route(around 2000 km length),connecting Yakutsk and Magadan that crosses 5 climatic types and more than 10 permafrost landscapes,so it seems a suitable path for establishing basic(reference)monitoring sites.From 12 target boreholes,on the first stage 5 boreholes up to 30 m in depth were drilled and instrumented for measuring temperature at sites adjacent to weather stations in the Verkhoyansk Range from 283 to 1288 m a.s.l.Here we present conception,purpose,and methods for permafrost study project with first preliminary results from the highest weather station of the East Siberia Mountain.The following research about geophysical investigations,permafrost landscape description,mapping and spatial modelling,numerical computing,physical modelling of permafrost thickness might be initiated by the Eastern Siberia Permafrost Transect(ESPT)-project.
基金Supported by the National Key Research and Development Program of China(2016YFB0100600)the Key Program of Bureau of Frontier Sciences and Education,Chinese Academy of Sciences(QYZDBSSW-JSC044).
文摘A junction temperature monitoring method has been presented based on the on-state voltage at high currents.With a simplified physical model,this method mapped the relationship between junction temperature and on-state voltage.The tough calibration and signal sensing issues are solved.Verified by body-diode voltage detecting method,the presented method shows a good performance and high accuracy,in the meantime,it would not change the modulation strategy and topology of the converter.
文摘The authors would like to apologize for some mistakes in the letter on Chinese Optics Letters vol. 12, no. 11, page 111701 and wish to make the corrections described below:
基金the National Natural Science Foundation of China(Nos.22074148,21874138,21635008,21727809)。
文摘The temperature monitoring of treated cancer cells is critical in photothermal therapy.Current methods of detecting intracellular temperatures have low accuracy and poor spatial resolution,which limits their application to photothermal therapy.Herein,a strategy for targeted recognition and selective capture of MCF-7 breast cancer cells based on fluorescent polymer poly(N-isopropylacrylamide-benzoxadiazole-2-vinyl-4,4-dimethyl azlactone,PNMV)and modified gold nanobipyramids(Au NBPs-PNMV)was developed for temperature sensing during photothermal therapy.A mucin-1 protein aptamer(Apt)was applied to selectively target mucin-1 protein overexpressed on the surfaces of the MCF-7 cells,which can reduce interference by affinity interaction between the Apt and proteins.During photothermal therapy,the significant Au NBPs photothermal effect increases the fluorescence intensity of PNMV with temperature.Irradiation of MCF-7 cells cultured with Au NBPs-PNMV@Apt by an 808 nm laser increases the temperature of the system,while the cells can be inactivated because of the remarkable Au NBPs-PNMV@Apt photothermal effect.The results indicate that variation in the fluorescence of Au NBPs-PNMV@Apt can be applied as thermometers to monitor the intracellular effect of photothermal therapy.
基金The authors acknowledge the National Science Foundation of China(no.22072132)Partial support from the Robert A.Welch Foundation(no.B-0027)is also acknowledged(S.M.).
文摘The ability to precisely monitor temperature at a high resolution is an important task,particularly in terms of safety.Inspired by natural thermosensitive transient receptor potential cation channels,we developed a temperature sensor based on thermaldriven ionic charge separation.To mimic the function of nature,an ionic covalent organic frameworkbased nanofluidic membrane was fabricated.By engineering the membrane to separate two electrolyte solutions,the temperature difference across the membrane can synchronously induce a potential.The high charge density and narrow channel size render extraordinary permselectivity to the membrane,thus offering a thermosensation selectivity of up to 1.25 mV K^(−1),superior to that of any known natural system.Additionally,the generated potential is linearly related to the introduced temperature gradient,thus allowing for precise detection.With these attributes,an alarm device with high thermosensation sensitivity was constructed,demonstrating great promise for environmental temperature monitoring.
基金Supported by the National Key Research and Development Program of China(2016YFB0100600).
文摘The aim of this study is to achieve online monitoring of the junction temperature of double-sided-cooling insulated gate bipolar transistor(IGBT)power modules by using the on-state voltage under a high current to maximize the utilization of IGBT power chips.Online junction temperature measurement plays an important role in improving the reliability of the inverter with IGBT,increasing the power density of the motor controller of electric vehicles,and reducing the cost of electric vehicles.
基金Supported in part by the National Key R&D Program of China(2021YFB2500600)in part by a CAS Youth Multidisciplinary Project(JCTD-2021-09)in part by the Strategic Piority Research Program of Chinese Academy of Sciences(XDA28040100)。
文摘The hybrid structure of a power-module package is summarized and classified.Basic and extended planar wire-bond designs are analyzed and compared with regular wire-bond modules and planar modules,respectively.The automatic layout method can improve the electrical and thermal performance of hybrid structures.A state-of-the-art hybrid structure is introduced,and suggestions for alleviating the current and temperature imbalances for future designs are provided.
基金Supported by the National Key Research and Development Program of China(2016YFB0100600).
文摘In this paper,an offline evaluation method for the cooling capability of three-phase insulated-gate bipolar transistor(IGBT)inverters is presented,which can better emulate real working conditions.With a properly designed sudden-stop control sequence,the conventional junction temperature monitoring method at a low current is used to calculate the junction temperature before the sudden stop of an inverter.This can solve the challenging switching loss calculation issue in conventional methods.Finally,the feasibility,control sequence,and electrical behaviors of the proposed method are validated through experimental tests.