Low temperature solid-phase sintering of sintered metal fibrous media with high specific surface area

A procedure of low temperature solid-phase sintering（LTSS） was carried out to fabricate sintered metal fibrous media（SMFM） with high specific surface area.Stainless steel fibers which were produced by cutting process were first plated with a coarse copper coating layer by electroless plating process.A low-temperature sintering process was then completed at about 800 °C for 1 h under the protection of hydrogen atmosphere.The results show that a novel SMFM with complex surface morphology and high specific surface area（0.2 m2/g） can be obtained in this way.The effect of sintering temperature on the surface morphology and specific surface area of SMFM was studied by means of scanning electron microscopy and Brunauer-Emmett-Teller.The damage of micro-structure during the sintering process mainly contributed to the loss of specific surface area of SMFM and the optimal sintering temperature was 800 °C.

A Decadal Shift of Summer Surface Air Temperature over Northeast Asia around the Mid-1990s

This study identifies a decadal shift of summer surface air temperature （SAT） over Northeast Asia,including southeastern parts of Russia,Mongolia and northern China,around the mid-1990s.The results suggest that the SAT over the Northeast Asia experienced a significant warming after 1994 relative to that before 1993.This decadal shift also extends to northern China,and leads to a warmer summer over Northeast China and North China after the mid-1990s.The decadal warming over Northeast Asia is found to concur with the enhancement of South China rainfall around the mid-1990s.On the one hand,both the Northeast Asian SAT and South China rainfall exhibit this mid-1990s decadal shift only in summer,but not in other seasons.On the other hand,both the Northeast Asian SAT and South China rainfall exhibit this mid-1990s decadal shift not only in the summer seasonal mean,but also in each month of summer （June,July and August）.Furthermore,the decadal warming is found to result from an anticyclonic anomaly over Northeast Asia,which can be interpreted as the response to the increased precipitation over South China,according to previous numerical results.Thus,we conclude that the warming shift of summer Northeast Asian SAT around the mid-1990s was a remote response to the increased precipitation over South China.

Examining the Relationship Between Spatial Configurations of Urban Impervious Surfaces and Land Surface Temperature

The urban heat island(UHI) effect has significant effects on the quality of life and public health. Numerous studies have addressed the relationship between UHI and the increase in urban impervious surface area(ISA), but few of them have considered the impact of the spatial configuration of ISA on UHI. Land surface temperature(LST) may be affected not only by urban land cover, but also by neighboring land cover. The aim of this research was to investigate the effects of the abundance and spatial association of ISAs on LST. Taking Harbin City, China as an example, the impact of ISA spatial association on LST measurements was examined. The abundance of ISAs and the LST measurements were derived from Landsat Thematic Mapper(TM) imagery of 2000 and 2010, and the spatial association patterns of ISAs were calculated using the local Moran’s I index. The impacts of ISA abundance and spatial association on LST were examined using correlation analysis. The results suggested that LST has significant positive associations with both ISA abundance and the Moran’s I index of ISAs, indicating that both the abundance and spatial clustering of ISAs contribute to elevated values of LST. It was also found that LST is positively associated with clustering of high-ISA-percentage areas(i.e.,>50%) and negatively associated with clustering of low-ISA-percentage areas(i.e.,<25%). The results suggest that, in addition to the abundance of ISAs,their spatial association has a significant effect on UHIs.

A Statistical Scheme for the Seasonal Forecasting of North China's Surface Air Temperature during Winter

This paper presents a statistical scheme for the seasonal forecasting of North China's surface air temperature (NCSAT) during winter. Firstly, a prediction model for an decrease or increase of winter NCSAT is established, whose predictors are available for no later than the previous September, as this is the most favorable month for seasonal forecasting up to two months ahead.The predicted NCSAT is then derived as the sum of the predicted increment of NCSAT and the previous NCSAT. The scheme successfully predicts the interannual and the decadal variability of NCSAT. Additionally, the advantages of the prediction scheme are discussed.

On the Solar Climate of the Moon and the Resulting Surface Temperature Distribution

The solar climate of our Moon is analyzed using the results of numerical simulations and the recently released data of the Diviner Lunar Radiometer Experiment (DLRE) to assess (a) the resulting distribution of the surface temperature, (b) the related global mean surface temperature Ts>, and (c) the effective radiation temperature Te often considered as a proxy for Ts> of rocky planets and/or their natural satellites, where Te is based on the global radiation budget of the well-known “thought model” of the Earth in the absence of its atmosphere. Because the Moon consists of similar rocky material like the Earth, it comes close to this thought model. However, the Moon’s astronomical features (e.g., obliquity, angular velocity of rotation, position relative to the disc of the solar system) differ from that of the Earth. Being tidally locked to the Earth, the Moon’s orbit around the Sun shows additional variation as compared to the Earth’s orbit. Since the astronomical parameters affect the solar climate, we predicted the Moon’s orbit coordinates both relative to the Sun and the Earth for a period of 20 lunations starting May 24, 2009, 00:00 UT1 with the planetary and lunar ephemeris DE430 of the Jet Propulsion Laboratory of the California Institute of Technology. The results revealed a mean heliocentric distance for the Moon and Earth of 1.00124279 AU and 1.00166376 AU, respectively. The mean geocentric distance of the Moon was 384792 km. The synodic and draconic months deviated from their respective means in a range of -5.7 h to 6.9 h and ±3.4 h, respectively. The deviations of the anomalistic months from their mean range between -2.83 d and 0.97 d with the largest negative deviations occurring around the points of inflection in the curve that represents the departure of the synodic month from its mean. Based on the two successive passages of the Sun through the ascending node of the lunar equator plane, the time interval between them corresponds to 347.29 days, i.e., it is slightly longer than the mean draconic year of 346.62 days. We computed the local solar insolation as input to the multilayer-force restore method of Kramm et al. (2017) that is based on the local energy budget equation. Due to the need to spin up the distribution of the regolith temperature to equilibrium, analysis of the model results covers only the last 12 lunations starting January 15, 2010, 07:11 UT1. The predicted slab temperatures, Tslab, considered as the realistic surface temperatures, follow the bolometric temperatures, Tbol, acceptably. According to all 24 DLRE datasets related to the subsolar longitude øss, the global averages of the bolometric temperature amounts to Tbol=201.1k± 0.6K. Based on the globally averaged emitted infrared radiation of FIR>=290.5W·m-2± 3.0W·m-2 derived from the 24 DLRE datasets, the effective radiative temperature of the Moon is Te, M>=Tbol>1/4=271.0k± 0.7K so that Tbol>≅0.742Te, M. The DLRE observations suggest that in the case of rocky planets and their natural satellites, the globally averaged surface temperature is notably lower than the effective radiation temperature. They differ by a factor that depends on the astronomical parameters especially on the angular velocity of rotation.

Calculation and experimental study on heating temperature field of super-high strength aluminum alloy thick plate

Stepped heating treatment has been applied to aluminum alloy thick plate to improve the mechanical performance and corrosion resistance.Accurate temperature control of the plate is the difficulty in engineering application.The heating process,the calculation of surface heat transfer coefficient and the accurate temperature control method were studied based on measured heating temperature for the large-size thick plate.The results show that,the temperature difference between the surface and center of the thick plate is small.Based on the temperature uniformity,the surface heat transfer coefficient was calculated,and it is constant below300°C,but grows greatly over300°C.Consequently,a lumped parameter method(LPM)was developed to predict the plate temperature.A stepped solution treatment was designed by using LPM,and verified by finite element method(FEM)and experiments.Temperature curves calculated by LPM and FEM agree well with the experimental data,and the LPM is more convenient in engineering application.

Immersing Treatment of Steel Plate Surface in Steel-Aluminum Solid to Liquid Bonding

The interfacial status of the steel-aluminum solid to liquid bonding plates (their steel plate surfaces were or were not immersed in flux aqueous solution) were measured by using SEM (Scanning Electron Microscope) and X-ray diffraction . The results showed that the layer of flux (the minimum thickness was 15 μm on the steel plate surface) could protect the steel plate surface from oxidizing effectively at high temperature in solid to liquid bonding. The melt temperatUre of the flux should be lower than 580 ℃ so that it could be melted and removed completely. No. 1 flux (patent product made by the author) made up of halogeindes could also force liquid aluminum to infiltrate into steel plate surface and thus the interfacial shear strength of the bonding plate was rather large.

High-temperature tribological properties of Ni-P alloy coatings deposited by electro-brush plating

High-temperature tribological properties of Ni-P alloy coatings processed by electro-brush plating on 20CrMo steel have been investigated. A baU-on-disc configuration was employed and 4 mm diameter Si3N4 balls were used as static counterpart. All the wear tests were carried out at 450℃ for 180 rain without lubricants. The electro-brush plating Ni-P coating is amorphous in as-deposited condition, and it becomes polycrystalline with the formation of Ni and Ni3P after heat treatment at 450℃for 1 h. The friction coefficient of the Ni-P coating is just 50% of that of the 20CrMo steel at the friction temperature of 450℃. A mild adhesive wear mechanism was found for the electro-brush plating Ni-P coating tested at 450℃, whereas for the 20CrMo steel at the same temperature a mixed adhesive and abrasive wear mechanism was observed.

Abrupt Summer Warming and Changes in Temperature Extremes over Northeast Asia Since the Mid-1990s: Drivers and Physical Processes

This study investigated the drivers and physical processes for the abrupt decadal summer surface warming and increases in hot temperature extremes that occurred over Northeast Asia in the mid-1990s. Observations indicate an abrupt increase in summer mean surface air temperature （SAT） over Northeast Asia since the mid-1990s. Accompanying this abrupt surface wanning, significant changes in some temperature extremes, characterized by increases in summer mean daily maximum temperature （Tmax）, daily minimum temperature （Train）, annual hottest day temperature （TXx）, and annual warmest night temperature （TNx） were observed. There were also increases in the frequency of summer days （SU） and tropical nights （TR）. Atmospheric general circulation model experiments forced by changes in sea surface temperature （SST）/sea ice extent （SIE）, anthropogenic greenhouse gas （GHG） concentrations, and anthropogenic aerosol （AA） forcing, relative to the period 1964- 93, reproduced the general patterns of observed summer mean SAT changes and associated changes in temperature extremes, although the abrupt decrease in precipitation since the mid-1990s was not simulated. Additional model experiments with different forcings indicated that changes in SST/SIE explained 76% of the area-averaged summer mean surface warming signal over Northeast Asia, while the direct impact of changes in GHG and AA explained the remaining 24% of the surface warming signal. Analysis of physical processes indicated that the direct impact of the changes in AA （through aerosol- radiation and aerosol-cloud interactions）, mainly related to the reduction of AA precursor emissions over Europe, played a dominant role in the increase in TXx and a similarly important role as SST/SIE changes in the increase in the frequency of SU over Northeast Asia via AA-induced coupled atmosphere-land surface and cloud feedbacks, rather than through a direct impact of AA changes on cloud condensation nuclei. The modelling results also imply that the abrupt summer surface warming and increases in hot temperature extremes over Northeast Asia since the mid-1990s will probably sustain in the next few decades as GHG concentrations continue to increase and AA precursor emissions over both North America and Europe continue to decrease.

Verification of an operational ocean circulation-surface wave coupled forecasting system for the China＇s seas

An operational ocean circulation-surface wave coupled forecasting system for the seas off China and adjacent areas（OCFS-C） is developed based on parallelized circulation and wave models. It has been in operation since November 1, 2007. In this paper we comprehensively present the simulation and verification of the system, whose distinguishing feature is that the wave-induced mixing is coupled in the circulation model. In particular, with nested technique the resolution in the China＇s seas has been updated to（1/24）° from the global model with（1/2）°resolution. Besides, daily remote sensing sea surface temperature（SST） data have been assimilated into the model to generate a hot restart field for OCFS-C. Moreover, inter-comparisons between forecasting and independent observational data are performed to evaluate the effectiveness of OCFS-C in upper-ocean quantities predictions, including SST, mixed layer depth（MLD） and subsurface temperature. Except in conventional statistical metrics, non-dimensional skill scores（SS） is also used to evaluate forecast skill. Observations from buoys and Argo profiles are used for lead time and real time validations, which give a large SS value（more than 0.90）. Besides, prediction skill for the seasonal variation of SST is confirmed. Comparisons of subsurface temperatures with Argo profiles data indicate that OCFS-C has low skill in predicting subsurface temperatures between 100 m and 150 m. Nevertheless, inter-comparisons of MLD reveal that the MLD from model is shallower than that from Argo profiles by about 12 m, i.e., OCFS-C is successful and steady in MLD predictions. Validation of 1-d, 2-d and 3-d forecasting SST shows that our operational ocean circulation-surface wave coupled forecasting model has reasonable accuracy in the upper ocean.

基于RST算法提取乌什M_(S)7.1地震地表温度异常

为探讨RST算法在新疆地区地震热红外异常提取中的适用性,以乌什M_(S)7.1地震为例,构建研究区MODIS地表温度数据集,并对数据集进行逐像元时间序列趋势去除后,利用RST算法提取乌什M_(S)7.1地震地表温度异常信息。结果表明:乌什M_(S)7.1地震地表温度异常的变化过程分为“出现—消失—再出现—扩大—达到最大—消失”6个阶段;乌什M_(S)7.1地震的地表温度异常区域大致沿构造带的走向分布;乌什M_(S)7.1地震发生在地表温度异常面积出现最大值后的第99天。利用MODIS数据结合RST算法提取地震热红外异常在新疆地区相关研究中具有一定的可行性。

Intraseasonal Variability of Summertime Surface Air Temperature over Mid-High-Latitude Eurasia and Its Prediction Skill in S2S Models

Features of the dominant modes of surface air temperature(SAT)on the intraseasonal timescale over the mid-highlatitude Eurasia(MHE)during boreal summer(June-September)are investigated based on the ERA5 reanalysis data from 1979 to 2016.The intraseasonal variability(ISV)of SAT over MHE is primarily characterized by an eastward propagation along 60°N,which is found to impact the regional weather in China,including summertime extreme hot and cool events.The forecast skill and potential predictability of the ISV of SAT over MHE are assessed for 5 dynamical models that have participated in the subseasonal-to-seasonal(S2 S)prediction project,by analyzing12 years’(1999-2010)model reforecast/hindcast data.By using the principal component(PC)index of the leading intraseasonal SAT modes as a predictand,we found that the forecast skill for ISV of SAT can reach out to 11-17 days,and the ECMWF model exhibits the best score.All the S2 S models tend to show 1)a relatively higher skill for strong intraseasonal oscillation(ISO)cases,2)a systematic underestimate of the amplitude of the SAT ISV signal,and 3)different skills during different phases of ISO cases.Analysis of potential predictability based on the perfectmodel assumption reveals a 4-6-day skill gap for most models,and the skill gap also varies among different phases of ISO events.The results imply the need for continued development of operational forecasting systems to improve the actual prediction skills for the ISV of SAT over MHE.

低温等离子体杀灭橙汁S.aureus的研究

非热杀菌能更好地提供产品质量,保留较好的营养成分,比传统杀菌技术更能节省能源,为开拓新的市场创造更大机遇。利用自行设计的介质阻挡放电反应器(DBDR),以鲜榨果汁为杀菌介质,研究DBDR所产生的低温等离子体(LTP)对鲜榨果汁的金黄色葡萄球菌(S.aureus)的杀菌规律。选取循环次数、pH、温度和电压4个因素进行中心组合设计,利用响应面对其杀菌规律进行研究,建立了低温等离子体(LTP)杀灭橙汁中S.aureus的二次多项数学模型,验证了模型的有效性,利用DesignExpert软件对其进行分析表明:循环7次,pH2.5,温度50℃,电压25kV时,杀菌率log(N0/N)最大,其预测值为5.19,与实测值相符。

ANSYS有限元模拟表面冷速对超厚板截面温度场的影响

为了研究表面冷速对超厚板心部冷却能力的影响,应用ANSYS有限元软件模拟分析了超厚板淬火水冷过程的截面温度场分布.结果表明:淬火过程中,心部与表面的截面温差随着表面冷速的增大而增大,但当冷速过大时,截面温差不再增大;随着表面冷速的增大,心部冷速在高温区和中温区表现出不同的变化规律,高温区(900～600℃),心部冷速随着表面冷速的增大而显著增大,但增幅逐渐减小,当表面冷速大于80℃/s后,心部冷速达到极值;中温区(600～300℃),心部冷速几乎不受表面冷速影响;此外,增大表面冷速对心部冷速的提升作用是有限的,厚度越大这一局限越为明显.

基于Savitzky-Golay滤波算法的FY-2F地表温度产品时间序列重建

卫星遥感技术可获取大面积、空间连续的地表温度(land surface temperature,LST),为全球变化、生态环境和农业生产等领域提供了宝贵的数据源,但受到云、气溶胶、观测角度和太阳光照角度等影响,遥感反演的LST在时间和空间上均存在不同程度的缺失,限制了LST遥感产品的应用。以长江三角洲地区为研究区,以风云2号F星(FY-2F) LST日均值产品为数据源,利用LST时间序列特征,基于Savitzky-Golay(S-G)滤波算法进行了LST长时间序列的重建研究。结果表明,研究区重建前FY-2F LST产品的平均时相缺失率为19.43%,经滤波后缺失率降低为1.69%,并能够保证LST空间一致性。通过模拟验证,S-G滤波重建LST的拟合精度为 0.95,平均绝对误差为1.35 K,具有较高的精度,可以用于进一步热环境时空分布规律的研究。

T91和Super304H钢材料高温腐蚀试验

锅炉受热面腐蚀、超温爆管严重影响机组的安全运行,尤其是在煤质复杂多变、机组频繁调峰的背景下,受热面管材失效,发生泄漏,威胁机组稳定运行。为探究高温下钢材腐蚀行为特性,选取2种典型的锅炉对流受热面常用钢材料T91和Super304H,在空气以及另外2种模拟含硫烟气(H_(2)S、SO_(2))气氛环境中,比较钢材料腐蚀行为特性。结果表明,Super304H钢的抗高温腐蚀性能明显优于T91钢,在3种气氛下,T91钢与Super304H钢的平均腐蚀速率之比最小为2,最大为18;2种钢材均在H_(2)S气氛下腐蚀速率最大;在SO_(2)气氛下腐蚀速率最小。从腐蚀产物形貌看,T91钢基体腐蚀后出现明显波纹化痕迹,表面粗糙,腐蚀产物之间分界明显,裂纹变大,出现较多孔状结构,较大的针状腐蚀产物呈脱落趋势;而Super304H钢基体仅在H_(2)S气氛下出现明显的腐蚀痕迹,在SO_(2)和O_(2)气氛下,基体表面总体仍然平整,腐蚀不明显。对腐蚀产物的线扫描分析发现,T91的腐蚀层主要为Cr_(2)O_(3)和Fe_(2)O_(3),而Super304H主要为Cr_(2)O_(3)、NiO和Fe_(2)O_(3)。但对腐蚀层厚度而言,Super304H仅为11.94μm,而T91为34.8μm,说明添加Cr、Ni元素对Super304H的抗氧化性能具有增强效应。虽然2种钢材腐蚀速率有差异,但按照GB/T 13303—1991《钢的抗氧化性能测定方法》划分的抗氧化性级别可知,2种钢材料均属于抗氧化性类型。

利用S-Z效应构建星系团电子气体数密度和温度分布

利用Sunyaev-Zeldovich(S-Z)效应观测数据,假定星系团内电子气体满足多方气体状态方程构建三个星系团(Abell 665,Abell2218,CL0016+16)的电子气体数密度和温度的径向分布,并对构建结果进行了误差估计.该三个星系团的X射线面亮度观测结果也被用于构建其气体密度和温度分布以作比较.

Seasonal Evolution of Dominant Modes in South Pacific SST and Relationship with ENSO

A season-reliant empirical orthogonal function （S-EOF） analysis was applied to the seasonal mean SST anomalies （SSTAs） based on the HadISST1 dataset with linear trend removed at every grid point in the South Pacific （60.5°-19.5°S, 139.5°E-60.5°W） during the period 1979-2009. The spatiotemporal characteristics of the dominant modes and their relationships with ENSO were analyzed. The results show that there are two seasonally evolving dominant modes of SSTAs in the South Pacific with interannual and interdeeadal variations; they account for nearly 40% of the total variance. Although the seasonal evolution of spatial patterns of the first S-EOF mode （S-EOF1） did not show remarkable propagation, it decays with season remarkably. The second S-EOF mode （S-EOF2） showed significant seasonal evolution and intensified with season, with distinct characteristics of eastward propagation of the negative SSTAs in southern New Zealand and positive SSTAs southeast of Australia. Both of these two modes have significant relationships with ENSO. These two modes correspond to the post-ENSO and ENSO turnabout years, respectively. The S- EOF1 mode associated with the decay of the eastern Pacific （EP） and the central Pacific （CP） types of ENSO exhibited a more significant relationship with the EP/CP type of E1 Nifio than that with the EP/CP type of La Nifia. The S-EOF2 mode contacted with the EP type of E1 Nifio changing into the EP/CP type of La Nifia showed a more significant connection with the EP/CP type of La Nifia.

Oxidation of Ion Plated Ni—Cr Alloy Film at 300℃

Investigation by using LAS 3000 surface analysis system showed that the oxide of Fe, Cr,Al formed during oxidation were Cr_2O_3,Fe_2O_3 and Al_2O_3,but only small amount of nickel oxide was found. The composition of oxide layers for different oxidation durations varied in a similar way. In all cases,there exists an oxygen concentration peak in the composition profile of oxide layer. There is a transitional zone between oxide layer and alloy film.The thickness of oxide layer increases logarithmically with the time of oxida- tion.The ion plated Ni-Cr alloy film has very dense oxide layer and good oxidation resistance.