The ion-to-electron temperature ratio is a good indicator of the processes involved in solar wind plasma entering and being transported inside Earth’s plasma sheet.In this study,we have demonstrated that patchy magne...The ion-to-electron temperature ratio is a good indicator of the processes involved in solar wind plasma entering and being transported inside Earth’s plasma sheet.In this study,we have demonstrated that patchy magnetic reconnection has the potential to preserve the ion-to-electron temperature ratio under certain conditions.If the charged particles are non-adiabatically accelerated no more than once in a single reconnection,the temperature ratio would be preserved;on the other hand,this ratio would not be preserved if they are accelerated multiple times.Consequently,under a northward interplanetary magnetic field(IMF)condition,the reconnection in the nonlinear phase of the Kelvin-Helmholtz instability is the dominant process for solar-originated plasma entering the Earth’s magnetosphere,and the ion-to-electron temperature ratio is preserved inside the plasma sheet.When the direction of the IMF is southward,the reflection of electrons from the magnetic mirror point,and subsequent multiple non-adiabatic accelerations at the reconnection site,are the primary reasons for the observed low ion-to-electron temperature ratio close to the Earth at midnight.While reconnections that occur in the night-side far tail might preserve the ratio,turbulence on the boundaries of the bursty bulk flows(BBFs)could change the ratio in the far tail through the violation of the frozen-in condition of the ions.The plateau in the contour of the calculated ion-to-electron temperature ratio in the down tail distance between 40 and 60 Earth radii may explain the strong correlation between the ion and electron temperatures in the outer central plasma sheet,which has not been clearly understood till date.展开更多
Magnesium(Mg)alloys are the lightest metal structural material for engineering applications and therefore have a wide market of applications.However,compared to steel and aluminum alloys,Mg alloys have lower mechanica...Magnesium(Mg)alloys are the lightest metal structural material for engineering applications and therefore have a wide market of applications.However,compared to steel and aluminum alloys,Mg alloys have lower mechanical properties,which greatly limits their application.Extrusion is one of the most important processing methods for Mg and its alloys.However,the effect of such a heterogeneous microstructure achieved at low temperatures on the mechanical properties is lacking investigation.In this work,commercial AZ80 alloys with different initial microstructures(as-cast and as-homogenized)were selected and extruded at a low extrusion temperature of 220℃and a low extrusion ratio of 4.The microstructure and mechanical properties of the two extruded AZ80 alloys were investigated.The results show that homogenized-extruded(HE)sample exhibits higher strength than the cast-extruded(CE)sample,which is mainly attributed to the high number density of fine dynamic precipitates and the high fraction of recrystallized ultrafine grains.Compared to the coarse compounds existing in CE sample,the fine dynamical precipitates of Mg17(Al,Zn)12form in the HE sample can effectively promote the dynamical recrystallization during extrusion,while they exhibit a similar effect on the size and orientation of the recrystallized grains.These results can facilitate the designing of high-strength wrought magnesium alloys by rational microstructure construction.展开更多
The sensitivity of Doppler wind lidar is an important parameter which affects the performance of Doppler wind lidar. Aerosol scattering ratio, atmospheric temperature, and wind speed obviously affect the measurement o...The sensitivity of Doppler wind lidar is an important parameter which affects the performance of Doppler wind lidar. Aerosol scattering ratio, atmospheric temperature, and wind speed obviously affect the measurement of Doppler wind lidar with iodine filter. We discuss about the relationship between the measurement sensitivity and the above atmospheric parameters. The numerical relationship between them is given through the theoretical simulation and calculation.展开更多
[Objective]The study aimed to analyze the release of total phosphorous from Wensi Lake sediment into water.[Method]Though simulation experiments in a laboratory,we studied the effects of various environmental factors ...[Objective]The study aimed to analyze the release of total phosphorous from Wensi Lake sediment into water.[Method]Though simulation experiments in a laboratory,we studied the effects of various environmental factors like water-soil ratio,water temperature,pH,disturbance and dissolved oxygen(DO) on TP release from Wensi Lake sediment.[Result]The higher the water-soil ratio,the less TP released from the sediment;temperature increase sped up TP release from the sediment;when pH of overlying water was 6,the amount of released TP was the lowest;disturbing the overlying water accelerate TP release from the sediment;the lower the DO content,the larger the released TP.[Conclusion]The research could provide scientific references for controlling the pollution of Wensi Lake.展开更多
1 Introduction The vertical stratification of the water column has a significant impact on the spatial distribution of aquatic organisms,the dynamics and structure of the food web in
Ceramic matrix composite(CMC),with higher thermal limit and lower density relative to the superalloy,is regarded as the most important structural material for modern gas turbine engines.However,the anisotropic thermal...Ceramic matrix composite(CMC),with higher thermal limit and lower density relative to the superalloy,is regarded as the most important structural material for modern gas turbine engines.However,the anisotropic thermal conductivities caused by the weave patterns totally change the thermal conduction performance inside the solid domain.Therefore,the present study aims to use the infrared thermographic to measure the SiC/SiC composite platform with staggered effusion holes along with the superalloy platform.CMC platform is prepared by 2-D plain weave braid structure with chemical vapor infiltration(CVI)process.The temperature of mainstream is 900 K to match the real mainstream to coolant temperature ratio(T_(g)/T_(c)=1.5,2.1).The experimental was conducted with seven mass flow ratios(MFR=1.5%-4.5%).The results indicate that the thermal conductivity along the thickness direction is of great importance for the CMC platform.The superalloy platform obtains higher level of overall cooling effectiveness than CMC at T_(g)/T_(c)=1.5.However,the CMC platform achieves greater overall cooling effectiveness relative to superalloy at T_(g)/T_(c)=2.1.In addition,CMC platform presents enhanced uniformity of overall cooling effectiveness due to the larger in-plane thermal conductivity.展开更多
The buoyancy effect on heat transfer in a rotating,two-pass,square channel is experimentally investigated in curent work.The classical copper plate technique is performed to measure the regional averaged heat transfer...The buoyancy effect on heat transfer in a rotating,two-pass,square channel is experimentally investigated in curent work.The classical copper plate technique is performed to measure the regional averaged heat transfer cofficients.In order to perform a fundamental research,all turbulators are removed away.Two approaches of altering Buoyancy numbers are selected:varying rotation number from 0 to 2.08 at Reynolds number ranges of 10000 to 70000,and varying inlet density ratio from 0.07 to 0.16 at Reynolds number of 10000.And thus,Buoyancy numbers range from 0 to 12.9 for both cases.According to the experimental results,the relationships between heat transfer and Buoyancy numbers are in accord with those obtained under different rotation numbers.For both leading and trailing surface,a critical Buoyancy number exists for each X/D location.Before the critical point,the effect of Buoyancy number on heat transfer is limited;but after that,the Nusselt number ratios show different increase rate.Given the same rotation number,higher wall temperature ratios with its corresponding higher Buoyancy numbers substantially enhance heat transfer on both passages.And the critical exceed-point that heat transfer from trailing surface higher than leading surface happens at the same Buoyancy number for different wall temperature ratios in the second passage.Thus,the stronger buoyancy effect promotes heat transfer enhancement at high rotation number condition.展开更多
Based on the variable characteristics of the actual operating conditions of the turbine shroud and the purpose of improving the cooling effect of the turbine shroud,this paper builds a test system of the impingement-f...Based on the variable characteristics of the actual operating conditions of the turbine shroud and the purpose of improving the cooling effect of the turbine shroud,this paper builds a test system of the impingement-film cooling shroud with two gas inlet angles(90°,167°).The effects of film cooling hole arrangement,gas inlet angle,blowing ratio(0.7,1.0,1.5,2.0,2.5,3.0)and temperature ratio(1.2,1.3,1.4,1.5,1.6)on the cooling characteristics of the impingement-film cooling shroud were experimentally studied by infrared temperature measurement technology,especially the effects of gas inlet angle and temperature ratio.The results showed that the film covering effect of the film cooling hole vertical or the same direction of the high-temperature gas incoming flow is better than the film covering effect of the reverse direction with the incoming flow,and the optimal arrangement of film cooling holes can improve the cooling effectiveness of the shroud.Compared with 90°intake gas,the film coverage area on the shroud surface of the 167°intake gas is expanded,and the surface average overall cooling effectiveness is increased by 1.03%to 12.6%.The overall cooling effectiveness of turbine shroud increases with the increase of blowing ratio,which increases the flow rate and pressure of cooling gas,and the corresponding increase rate is between 1.04%and 9.96%.However,the increase in the temperature ratio increases the mainstream heating capacity,resulting in a decrease in the cooling effectiveness of the shroud,with a maximum reduction rate of 11.04%.展开更多
This paper presents a computational investigation of hydrodynamics, heat transfer and cracking reaction in a heavy oil riser operated in a novel operating mode of low temperature contact and high catalyst-to-oil ratio...This paper presents a computational investigation of hydrodynamics, heat transfer and cracking reaction in a heavy oil riser operated in a novel operating mode of low temperature contact and high catalyst-to-oil ratio. Through incorporating feedstock vaporization and a 12-lump cracking kinetics model, a validated gas-solid flow model has been extended to the analysis of the hydrodynamic and reaction behavior in an industrial riser. The results indicate that the hydrodynamics, temperature and species concentration exhibit significantly nonuniform behavior inside the riser, especially in the atomization nozzle region. The lump concentration profiles along the riser height provide useful information for riser optimization. Compared to conventional fluid catalytic cracking (FCC) process, feedstock conversion and gasoline yield are respectively increased by 1.9 units and 1.0 unit in the new FCC process, the yield of liquefied petroleum gas is increased by about 1.0 unit while dry gas yield is reduced by about 0.3 unit.展开更多
This paper proposes a novel high-power supply rejection ratio(high-PSRR) high-order curvature-compensated CMOS bandgap voltage reference(BGR) in SMIC 0.18 μm CMOS process. Three kinds of current are added to a co...This paper proposes a novel high-power supply rejection ratio(high-PSRR) high-order curvature-compensated CMOS bandgap voltage reference(BGR) in SMIC 0.18 μm CMOS process. Three kinds of current are added to a conventional BGR in order to improve the temperature drift within wider temperature range, which include a piecewise-curvaturecorrected current in high temperature range, a piecewise-curvature-corrected current in low temperature range and a proportional-to-absolute-temperature T^(1.5) current. The high-PSRR characteristic of the proposed BGR is achieved by adopting the technique of pre-regulator. Simulation results shows that the temperature coefficient of the proposed BGR with pre-regulator is 8.42x10^(-6)′ /℃ from - 55 ℃ to 125 ℃ with a 1.8 V power supply voltage. The proposed BGR with pre-regulator achieves PSRR of - 123.51 dB, - 123.52 dB, - 88.5 dB and - 50.23 dB at 1 Hz, 100 Hz, 100 kHz and 1 MHz respectively.展开更多
文摘The ion-to-electron temperature ratio is a good indicator of the processes involved in solar wind plasma entering and being transported inside Earth’s plasma sheet.In this study,we have demonstrated that patchy magnetic reconnection has the potential to preserve the ion-to-electron temperature ratio under certain conditions.If the charged particles are non-adiabatically accelerated no more than once in a single reconnection,the temperature ratio would be preserved;on the other hand,this ratio would not be preserved if they are accelerated multiple times.Consequently,under a northward interplanetary magnetic field(IMF)condition,the reconnection in the nonlinear phase of the Kelvin-Helmholtz instability is the dominant process for solar-originated plasma entering the Earth’s magnetosphere,and the ion-to-electron temperature ratio is preserved inside the plasma sheet.When the direction of the IMF is southward,the reflection of electrons from the magnetic mirror point,and subsequent multiple non-adiabatic accelerations at the reconnection site,are the primary reasons for the observed low ion-to-electron temperature ratio close to the Earth at midnight.While reconnections that occur in the night-side far tail might preserve the ratio,turbulence on the boundaries of the bursty bulk flows(BBFs)could change the ratio in the far tail through the violation of the frozen-in condition of the ions.The plateau in the contour of the calculated ion-to-electron temperature ratio in the down tail distance between 40 and 60 Earth radii may explain the strong correlation between the ion and electron temperatures in the outer central plasma sheet,which has not been clearly understood till date.
基金Supported by National Natural Science Foundation of China(Grant Nos.52171121,51971151,52201131 and 52201132)Liaoning Provincial Xingliao Program of China(Grant No.XLYC1907083)+1 种基金Liaoning Provincial Natural Science Foundation of China(Grant No.2022-NLTS-18-01)Open Foundation of Key Laboratory of Superlight Materials and Surface Technology of Ministry of Education of China(Grant No.HEU10202205).
文摘Magnesium(Mg)alloys are the lightest metal structural material for engineering applications and therefore have a wide market of applications.However,compared to steel and aluminum alloys,Mg alloys have lower mechanical properties,which greatly limits their application.Extrusion is one of the most important processing methods for Mg and its alloys.However,the effect of such a heterogeneous microstructure achieved at low temperatures on the mechanical properties is lacking investigation.In this work,commercial AZ80 alloys with different initial microstructures(as-cast and as-homogenized)were selected and extruded at a low extrusion temperature of 220℃and a low extrusion ratio of 4.The microstructure and mechanical properties of the two extruded AZ80 alloys were investigated.The results show that homogenized-extruded(HE)sample exhibits higher strength than the cast-extruded(CE)sample,which is mainly attributed to the high number density of fine dynamic precipitates and the high fraction of recrystallized ultrafine grains.Compared to the coarse compounds existing in CE sample,the fine dynamical precipitates of Mg17(Al,Zn)12form in the HE sample can effectively promote the dynamical recrystallization during extrusion,while they exhibit a similar effect on the size and orientation of the recrystallized grains.These results can facilitate the designing of high-strength wrought magnesium alloys by rational microstructure construction.
基金the National Natural Science Foundation of China under Grant No.40427001,60578038,and 40505003
文摘The sensitivity of Doppler wind lidar is an important parameter which affects the performance of Doppler wind lidar. Aerosol scattering ratio, atmospheric temperature, and wind speed obviously affect the measurement of Doppler wind lidar with iodine filter. We discuss about the relationship between the measurement sensitivity and the above atmospheric parameters. The numerical relationship between them is given through the theoretical simulation and calculation.
文摘[Objective]The study aimed to analyze the release of total phosphorous from Wensi Lake sediment into water.[Method]Though simulation experiments in a laboratory,we studied the effects of various environmental factors like water-soil ratio,water temperature,pH,disturbance and dissolved oxygen(DO) on TP release from Wensi Lake sediment.[Result]The higher the water-soil ratio,the less TP released from the sediment;temperature increase sped up TP release from the sediment;when pH of overlying water was 6,the amount of released TP was the lowest;disturbing the overlying water accelerate TP release from the sediment;the lower the DO content,the larger the released TP.[Conclusion]The research could provide scientific references for controlling the pollution of Wensi Lake.
基金supported by the Integration Project of SB RAS No. 56Russian Foundation for Basic Research grant No. 13-05-00853
文摘1 Introduction The vertical stratification of the water column has a significant impact on the spatial distribution of aquatic organisms,the dynamics and structure of the food web in
基金support of National Natural Science Foundation of China(No.52006178)National Key R&D Program of China(No.Y2019-Ⅷ-0007-0168)+1 种基金the Fundamental Research Funds for the Central Universitiesthe Innovation Capacity Support Plan in Shaanxi Province of China(Grant No.2023-CX-TD-19)。
文摘Ceramic matrix composite(CMC),with higher thermal limit and lower density relative to the superalloy,is regarded as the most important structural material for modern gas turbine engines.However,the anisotropic thermal conductivities caused by the weave patterns totally change the thermal conduction performance inside the solid domain.Therefore,the present study aims to use the infrared thermographic to measure the SiC/SiC composite platform with staggered effusion holes along with the superalloy platform.CMC platform is prepared by 2-D plain weave braid structure with chemical vapor infiltration(CVI)process.The temperature of mainstream is 900 K to match the real mainstream to coolant temperature ratio(T_(g)/T_(c)=1.5,2.1).The experimental was conducted with seven mass flow ratios(MFR=1.5%-4.5%).The results indicate that the thermal conductivity along the thickness direction is of great importance for the CMC platform.The superalloy platform obtains higher level of overall cooling effectiveness than CMC at T_(g)/T_(c)=1.5.However,the CMC platform achieves greater overall cooling effectiveness relative to superalloy at T_(g)/T_(c)=2.1.In addition,CMC platform presents enhanced uniformity of overall cooling effectiveness due to the larger in-plane thermal conductivity.
文摘The buoyancy effect on heat transfer in a rotating,two-pass,square channel is experimentally investigated in curent work.The classical copper plate technique is performed to measure the regional averaged heat transfer cofficients.In order to perform a fundamental research,all turbulators are removed away.Two approaches of altering Buoyancy numbers are selected:varying rotation number from 0 to 2.08 at Reynolds number ranges of 10000 to 70000,and varying inlet density ratio from 0.07 to 0.16 at Reynolds number of 10000.And thus,Buoyancy numbers range from 0 to 12.9 for both cases.According to the experimental results,the relationships between heat transfer and Buoyancy numbers are in accord with those obtained under different rotation numbers.For both leading and trailing surface,a critical Buoyancy number exists for each X/D location.Before the critical point,the effect of Buoyancy number on heat transfer is limited;but after that,the Nusselt number ratios show different increase rate.Given the same rotation number,higher wall temperature ratios with its corresponding higher Buoyancy numbers substantially enhance heat transfer on both passages.And the critical exceed-point that heat transfer from trailing surface higher than leading surface happens at the same Buoyancy number for different wall temperature ratios in the second passage.Thus,the stronger buoyancy effect promotes heat transfer enhancement at high rotation number condition.
基金The authors are grateful for the supported by China Postdoctoral Science Foundation(NO.2020TQ0147)Natural Science Foundation of Jiangsu Province(NO.BK20200454)the Fundamental Research Funds for the Central Universities(NO.NJ2020014).
文摘Based on the variable characteristics of the actual operating conditions of the turbine shroud and the purpose of improving the cooling effect of the turbine shroud,this paper builds a test system of the impingement-film cooling shroud with two gas inlet angles(90°,167°).The effects of film cooling hole arrangement,gas inlet angle,blowing ratio(0.7,1.0,1.5,2.0,2.5,3.0)and temperature ratio(1.2,1.3,1.4,1.5,1.6)on the cooling characteristics of the impingement-film cooling shroud were experimentally studied by infrared temperature measurement technology,especially the effects of gas inlet angle and temperature ratio.The results showed that the film covering effect of the film cooling hole vertical or the same direction of the high-temperature gas incoming flow is better than the film covering effect of the reverse direction with the incoming flow,and the optimal arrangement of film cooling holes can improve the cooling effectiveness of the shroud.Compared with 90°intake gas,the film coverage area on the shroud surface of the 167°intake gas is expanded,and the surface average overall cooling effectiveness is increased by 1.03%to 12.6%.The overall cooling effectiveness of turbine shroud increases with the increase of blowing ratio,which increases the flow rate and pressure of cooling gas,and the corresponding increase rate is between 1.04%and 9.96%.However,the increase in the temperature ratio increases the mainstream heating capacity,resulting in a decrease in the cooling effectiveness of the shroud,with a maximum reduction rate of 11.04%.
基金supports by National Natural Science Foundation of China (Nos. 51025624 and 20976191)111 Project (B12034)Fundamental Research Funds for the Central Universities (11QG26)
文摘This paper presents a computational investigation of hydrodynamics, heat transfer and cracking reaction in a heavy oil riser operated in a novel operating mode of low temperature contact and high catalyst-to-oil ratio. Through incorporating feedstock vaporization and a 12-lump cracking kinetics model, a validated gas-solid flow model has been extended to the analysis of the hydrodynamic and reaction behavior in an industrial riser. The results indicate that the hydrodynamics, temperature and species concentration exhibit significantly nonuniform behavior inside the riser, especially in the atomization nozzle region. The lump concentration profiles along the riser height provide useful information for riser optimization. Compared to conventional fluid catalytic cracking (FCC) process, feedstock conversion and gasoline yield are respectively increased by 1.9 units and 1.0 unit in the new FCC process, the yield of liquefied petroleum gas is increased by about 1.0 unit while dry gas yield is reduced by about 0.3 unit.
基金supported by the National Natural Science Foundation of China (61471075, 61301124)the 2013 Program for Innovation Team Building at Institutions of Higher Education in Chongqing (the Innovation Team of Smart Medical System and Key Technology)
文摘This paper proposes a novel high-power supply rejection ratio(high-PSRR) high-order curvature-compensated CMOS bandgap voltage reference(BGR) in SMIC 0.18 μm CMOS process. Three kinds of current are added to a conventional BGR in order to improve the temperature drift within wider temperature range, which include a piecewise-curvaturecorrected current in high temperature range, a piecewise-curvature-corrected current in low temperature range and a proportional-to-absolute-temperature T^(1.5) current. The high-PSRR characteristic of the proposed BGR is achieved by adopting the technique of pre-regulator. Simulation results shows that the temperature coefficient of the proposed BGR with pre-regulator is 8.42x10^(-6)′ /℃ from - 55 ℃ to 125 ℃ with a 1.8 V power supply voltage. The proposed BGR with pre-regulator achieves PSRR of - 123.51 dB, - 123.52 dB, - 88.5 dB and - 50.23 dB at 1 Hz, 100 Hz, 100 kHz and 1 MHz respectively.