The Coordinated Influence of Indian Ocean Sea Surface Temperature and Arctic Sea Ice on Anomalous Northeast China Cold Vortex Activities with Different Paths during Late Summer

The Northeast China cold vortex(NCCV)during late summer(from July to August)is identified and classified into three types in terms of its movement path using machine learning.The relationships of the three types of NCCV intensity with atmospheric circulations in late summer,the sea surface temperature(SST),and Arctic sea ice concentration(SIC)in the preceding months,are analyzed.The sensitivity tests by the Community Atmosphere Model version 5.3(CAM5.3)are used to verify the statistical results.The results show that the coordination pattern of East Asia-Pacific(EAP)and Lake Baikal high pressure forced by SST anomalies in the North Indian Ocean dipole mode(NIOD)during the preceding April and SIC anomalies in the Nansen Basin during the preceding June results in an intensity anomaly for the first type of NCCV.While the pattern of high pressure over the Urals and Okhotsk Sea and low pressure over Lake Baikal during late summer-which is forced by SST anomalies in the South Indian Ocean dipole mode(SIOD)in the preceding June and SIC anomalies in the Barents Sea in the preceding April-causes the intensity anomaly of the second type.The third type is atypical and is not analyzed in detail.Sensitivity tests,jointly forced by the SST and SIC in the preceding period,can well reproduce the observations.In contrast,the results forced separately by the SST and SIC are poor,indicating that the NCCV during late summer is likely influenced by the coordinated effects of both SST and SIC in the preceding months.

Homogenised Monthly and Daily Temperature and Precipitation Time Series in China and Greece since 1960

In this paper,we describe and analyze two datasets entitled“Homogenised monthly and daily temperature and precipitation time series in China during 1960–2021”and“Homogenised monthly and daily temperature and precipitation time series in Greece during 1960–2010”.These datasets provide the homogenised monthly and daily mean(TG),minimum(TN),and maximum(TX)temperature and precipitation(RR)records since 1960 at 366 stations in China and 56stations in Greece.The datasets are available at the Science Data Bank repository and can be downloaded from https://doi.org/10.57760/sciencedb.01731 and https://doi.org/10.57760/sciencedb.01720.For China,the regional mean annual TG,TX,TN,and RR series during 1960–2021 showed significant warming or increasing trends of 0.27℃(10 yr)^(-1),0.22℃(10 yr)^(-1),0.35℃(10 yr)^(-1),and 6.81 mm(10 yr)-1,respectively.Most of the seasonal series revealed trends significant at the 0.05level,except for the spring,summer,and autumn RR series.For Greece,there were increasing trends of 0.09℃(10 yr)-1,0.08℃(10 yr)^(-1),and 0.11℃(10 yr)^(-1)for the annual TG,TX,and TN series,respectively,while a decreasing trend of–23.35 mm(10 yr)^(-1)was present for RR.The seasonal trends showed a significant warming rate for summer,but no significant changes were noted for spring(except for TN),autumn,and winter.For RR,only the winter time series displayed a statistically significant and robust trend[–15.82 mm(10 yr)^(-1)].The final homogenised temperature and precipitation time series for both China and Greece provide a better representation of the large-scale pattern of climate change over the past decades and provide a quality information source for climatological analyses.

Effects of Cooking Temperature and Storage Time on the Quality of Macadamia Nut Oil

The purpose is to study the influence of cooking and storage habits on the quality of macadamia nut oil,so as to provide reference for macadamia nut processingenterprises and consumers.Macadamia oil was treated at 100℃,200℃,300℃,microwave heating,45℃constant temperature storage,natural light for different times,and its acid value,peroxide value,squalene,sterol and fatty acid content were detected according to the national standard method.The results showed that the acid value and peroxide value increased with time.The acid value and peroxide value of macadamia oil cooked at 300℃and stored under natural light were higher than those heated by microwave and stored at 45℃,and increased rapidly with the increase of cooking and light time.The acid value was as high as 0.77 mg/g,with an increase of 63.8%,and the peroxide value was as high as 6.18 mg/g,with an increase of 43.7%.As for squalene,it decreased in varying degrees with heating time and storage time.Squalene in macadamia oil cooked at 300℃and stored under natural light were lower than those heated by microwave and stored at 45℃constant temperature,respectively,and decreased rapidly with the increase of cooking and light time,with the reduction ranges of 38.6%and28.4%respectively;Stigmasterol was not detected in macadamia oil.But in macadamia oil the content ofβ-sitosterol was 0.132 g/100 g,and the content did not change significantly in each treatmentgroup.In the experimental treatment group,the content of fatty acids in macadamia oil had different trends.After treatment at 300℃for 20 minutes,the content of oleic acid decreased by 75.66%,the content of palmitic acid decreased by 75.28%,and thecontent of palmitic acid decreased by 74.12%.In conclusion,low temperature heating,microwave heating and storage away from light can better preserve the quality of macadamia oil,this study will provide a theoretical basisfor the rational utilization of macadamia oil as cooking oil.

Temporal transcriptomics reveal the molecular mechanism of dormancy and germination regulated by temperature in Paris polyphylla seed

The mature seed of Paris polyphylla var.chinensis(PPC)is morphophysiologically dormant and develops differently under warm and cold temperatures.To elucidate the molecular mechanisms underlying temperature-dependent regulation of PPC seed dormancy and germination,we investigated the dynamic changes in PPC seed transcript levels under warm and cold temperature stratifications(WS and CS,respectively)by time-resolved RNA sequencing,focusing on genes related to hormone metabolism and signaling and cell wall remodeling(CWRM)and encoding transcription factors/regulators(TFs/TRs).A total of 48765 and 47836 differentially expressed genes(DEGs)were associated with WS and CS,respectively.Of these,17581 and 16652 DEGs,respectively,unique to WS and CS,and 5386 were common to both temperature stratifications across nine analyzed growth stages.The expression of hormone metabolism and signaling,TF/TR,and CWRM genes were closely associated with temperature.More genes related to gibberellin(GA),cytokinin,auxin,and brassinosteroid biosynthetic were upregulated in WS as compared to CS seeds,while genes related to dormancy release and germination were downregulated in WS seeds.However,only GA and abscisic acid levels were altered in PPC seeds breaking morphophysiological dormancy(MPD).Overall,37 TF and five TR families were upregulated whereas 24 TF and 16 TR families were downregulated in WS as compared to CS seeds.Most CWRM families were highly expressed under WS as compared to CS,suggesting that they promote endosperm weakening and embryo growth of WS seeds and facilitate MPD release and germination.A coexpression analysis revealed positive correlations between TFs/TRs and DEGs involved in hormone metabolism and signaling and CWRM.These results provided a basis for investigating the interaction between the endosperm and underdeveloped embryo in the regulation of PPC seed germination and seedling emergence.

Effect of pyrolysis temperature and hold time on the characteristic parameters of adsorbent derived from sewage sludge

According to the Doehlert's matrix method, the adsorbent derived from sewage sludge was prepared through chemical activation under controlling the pyrolysis temperature and hold time. The characteristic parameters including the total yield, adsorption of methylene blue, adsorption of iodine, BET surface area, micro-pore volume are 35%—49%, 16.5—38 mg/g, 285—362 mg/g, 185—359 m2/g, and 0.112—0.224 m3/g, respectively. According to the experimental data, the multi-linear regression method was adopted to fit the relations between the characteristic parameters and influential factors. At final, through optimization method, the optimal adsorbent is obtained when using 62 min as hold time and 1105K as pyrolysis temperature. Under the conditions, the adsorbent was produced and compared the characteristic parameters with model forecast value, the coherence is satisfied.

Modeling seasonal leptospirosis transmission and its association with rainfall and temperature in Thailand using time-series and ARIMAX analyses

Objective:To study the number of leptospirosis cases in relations to the seasonal pattern,and its association with climate factors.Methods:Time series analysis was used to study the time variations in the number of leptospirosis cases.The Autoregressive Integrated Moving Average (ARIMA) model was used in data curve fitting and predicting the next leptospirosis cases. Results:We found that the amount of rainfall was correlated to leptospirosis cases in both regions of interest,namely the northern and northeastern region of Thailand,while the temperature played a role in the northeastern region only.The use of multivariate ARIMA(ARIMAX) model showed that factoring in rainfall(with an 8 months lag) yields the best model for the northern region while the model,which factors in rainfall(with a 10 months kg) and temperature(with an 8 months lag) was the best for the northeaslern region.Conclusions:The models are able to show the trend in leptospirosis cases and closely fit the recorded data in both regions.The models can also be used to predict the next seasonal peak quite accurately.

Effect of decarburization annealing temperature and time on the carbon content, microstructure, and texture of grain-oriented pure iron

In this study,the effect of decarburization annealing temperature and time on the carbon content,microstructure,and texture of grain-oriented pure iron was investigated by optical microscopy and scanning electron microscopy with electron-backscatter diffraction. The results showed that the efficiency of decarburization dramatically increased with increasing decarburization temperature. However,when the annealing temperature was increased to 825°C and 850°C,the steel's carbon content remained essentially unchanged at 0.002%. With increasing decarburization time,the steel's carbon content generally decreased. When both the decarburization temperature and time were increased further,the average grain size dramatically increased and the number of fine grains decreased; meanwhile,some relatively larger grains developed. The main texture types of the decarburized sheets were approximately the same: {001}<110> and {112~115}<110>,with a γ-fiber texture. Furthermore,little change was observed in the texture. Compared with the experimental sheets,the texture of the cold-rolled sheet was very scattered. The best average magnetic induction(B_(800)) among the final products was 1.946 T.

Effects of Calcining Temperature and Holding Time on the Synthesis of Aluminum Titanate

We aim in this research at synthesizing high-purity aluminium titanate with sludge from the aluminium profile factory by shock cooling method, and mainly discuss the effect of calcining reaction temperature and holding time on crystalline, microstructure and content of aluminum titanate materials to determine the preferred calcining temperature and holding time. XRD and SEM methods were utilized to characterize the crystalline and microstructure of each specimen, Rietveld Quantification software was used for the determination of different crystalline contents of specimens, and Philips plus software was applied to determine the cell parameters of aluminium titanate in different specimens. According to the experimental results, preferred calcining temperature is determined as 1400℃ and preferred holding time is 2 h, at which the grains of aluminum titanate grow completely and the purity of aluminum titanate is 97.2wt%.

Effects of Temperature and Hydraulic Residence Time (HRT) on Treatment of Dilute Wastewater in a Carrier Anaerobic Baffled Reactor

Objective To examine the effect of hydraulic residence time （HRT） on the performance and stability, to treat dilute wastewater at different operational temperatures in a carrier anaerobic baffled reactor （CABR）, and hence to gain a deeper insight into microbial responses to hydraulic shocks on the base of the relationships among macroscopic performance, catabolic intermediate, and microcosmic alternation. Methods COD, VFAs, and microbial activity were detected with constant feed strength （300 mg/L） at different HRTs （9-18 h） and temperatures （10℃-28℃） in a CABR. Results The removal efficiencies declined with the decreases of HRTs and temperatures. However, the COD removal load was still higher at short HRT than at long HRT. Devastating reactor performance happened at temperature of 10℃ and at HRT of 9 h. HRTs had effect on the VFAs in the reactor slightly both at high and low temperatures, but the reasons differed from each other. Microbial activity was sensitive to indicate changes of environmental and operational parameters in the reactor. Conclusion The CABR offers to certain extent an application to treat dilute wastewater under a hydraulic-shock at temperatures from 10℃to 28℃.

Impacts of Reference Time Series on the Homogenization of Radiosonde Temperature

Using radiosonde temperatures of 92 selected stations in China,the uncertainties in homogenization processes caused by different reference series,including nighttime temperature,the NCEP （National Centers for Environmental Prediction） and ERA-40 （European Centre for Medium-Range Weather Forecasts） forecasting background,are examined via a two-phase regression approach.Although the results showed limited consistency in the temporal and spatial distribution of identified break points （BPs） in the context of metadata events of instrument model change and correction method,significant uncertainties still existed in BP identification,adjustment,and impact on the estimated trend.Reanalysis reference series generally led to more BP identification in homogenization.However,those differences were parts of global climatic shifts,which may have confused the BP calculations.Discontinuities also existed in the reanalysis series due to changes in the satellite input.The adjustment values deduced from the reanalysis series ranged widely and were larger than those from the nighttime series and,therefore,impacted the estimated temperature trend.

Uniaxial Time-Dependent Ratcheting of SS304 Stainless Steel at High Temperatures

The uniaxial time-dependent strain cyclic behaviors and ratcheting of SS304 stainless steel were studied at high temperatures （350 ℃ and 700 ℃）. The effects of straining and stressing rates, holding time at the peak and/or valley of each cycle in addition to ambient temperature on the cyclic softening/hardening behavior and ratcheting of the material were discussed. It can be seen from experimental results that the material presents remarkable time dependence at 700 ℃, and the ratcheting strain depends greatly on the stressing rate, holding time and ambient temperature. Some significant conclusions are obtained, which are useful to build a constitutive model describiog the time-dependent cyclic deformation of the material.

Effect of interlayer cooling time on the temperature field of 5356-TIG wire arc additive manufacturing

In the paper, the finite element model(FEM) of wire arc additive manufacturing(WAAM) by TIG method was established by the ABAQUS soft, and the phase transformation latent heat was considered in the model. The evolution rules of temperature field at the interlayer with the cooling time of 10 s, 30 s and 50 s were obtained by the model. The WAAM experiment were performed by 5356 aluminum alloy welding wire with φ1.2 mm, and the simulated temperature field were varified by the thermocouple. The result shows that the highest temperature at the molten pool center increases with the increased interlayers at the same interlayer cooling time;the highest temperature drops gradually and the decline is smaller with the increased interlayer cooling time at the same layer. No remelting occurs at the top layer, and at least two remelting times occur in the other layers, resulting in complex temperature field evolution.

Analysis of Change Point in Surface Temperature Time Series Using Cumulative Sum Chart and Bootstrapping for Asansol Weather Observation Station, West Bengal, India

This paper aims to detect the short-term as well as long-term change point in the surface air temperature time series for Asansol weather observation station, West Bengal, India. Temperature data for the period from 1941 to 2010 of the said weather observatory have been collected from Indian Meteorological Department, Kolkata. Variations and trends of annual mean temperature, annual mean maximum temperature and annual minimum temperature time series were examined. The cumulative sum charts (CUSUM) and bootstrapping were used for the detection of abrupt changes in the time series data set. Statistically significant abrupt changes and trends have been detected. The major change point in the annual mean temperatures occurred around 1986 (0.57°C) at the period of 25 years in the long-term regional scale. On the other side, the annual mean maximum and annual mean minimum temperatures have distinct change points at level 1. There are abrupt changes in the year 1961 (Confidence interval 1961, 1963) for the annual mean maximum and 1994 (Confidence interval 1993, 1996) for the annual mean minimum temperatures at a confidence level of 100% and 98%, respectively. Before the change, the annual mean maximum and annual mean minimum temperatures were 30.90°C and 23.99°C, respectively, while after the change, the temperatures became 33.93°C and 24.84°C, respectively. Over the entire period of consideration (1941-2010), 11 forward and backward changes were found in total. Out of 11, there are 3 changes (1961, 1986 and 2001) in annual mean temperatures, 4 changes (1957, 1961, 1980 and 1994) in annual mean maximum temperatures, and rest 4 changes (1968, 1981, 1994 and 2001) are associated with annual mean minimum temperature data set.

Effect of sex,temperature,time and flock size on the diving behavior of the wintering Scaly-sided Merganser(Mergus squamatus)

Background: The foraging and diving behavior of waterfowl are affected by a number of important factors. Hence, learning more about these major factors is of great concern in order to protect endangered species. In this study, we verified the effect of sex, temperature, time and flock size on the diving behavior of the Scaly-sided Merganser(Mergus squamatus).Methods: The study was conducted by means of focal animal sampling in the Wuyuan section of the Poyang Lake watershed in Jiangxi Province, China from December 2015 to March 2016. We used one-way ANOVA and LSD tests to investigate the differences among these factors. Pearson correlations were used to test the relation between pause duration and the previous or subsequent dive duration. The relations between these factors and dive/pause duration are illustrated using Spearman correlations.Results: Mean dive duration and mean time on the pause of males were significantly higher than those of females. With an increase in temperature, dive duration significantly increased. Along with the passage of time of year and daytime, dive duration significantly increased, while dive duration decreased significantly with the increase in flock size.Conclusions: Sex, temperature, time and flock size have an effect on the diving behavior of the wintering Scalysided Merganser. The difference of diving behavior between males and females is related to differences in body mass. The difference of diving behavior among various temperatures and time periods may be related to a low minimum rate of oxygen consumption, while the difference among various flock sizes may be caused by rising intraspecific competition.

Temperature and Daily Mortality in Shanghai:A Time-series Study

To investigate the association between temperature and daily mortality in Shanghai from June 1, 2000 to December 31, 2001. Methods Time-series approach was used to estimate the effect of temperature on daily total and cause-specific mortality. We fitted generalized additive Poisson regression using non-parametric smooth functions to control for long-term time trend, season and other variables. We also controlled for day of the week. Results A gently sloping V-like relationship between total mortality and temperature was found, with an optimum temperature (e.g. temperature with lowest mortality risk) value of 26.7癈 in Shanghai. For temperatures above the optimum value, total mortality increased by 0.73% for each degree Celsius increase; while for temperature below the optimum value, total mortality decreased by 1.21% for each degree Celsius increase. Conclusions Our findings indicate that temperature has an effect on daily mortality in Shanghai, and the time-series approach is a useful tool for studying the temperature-mortality association.

Spatiotemporal Evolution Characteristics of Urban Land Surface Temperature Based on Local Climate Zones in Xi’an Metropolitan,China

Local climate zones(LCZs)are an effective nexus linking internal urban structures to the local climate and have been widely used to study urban thermal environment.However,few studies considered how much the temperature changed due to LCZs transformation and their synergy.This paper quantified the change of urban land surface temperature(LST)in LCZs transformation process by combining the land use transfer matrix with zonal statistics method during 2000–2019 in the Xi’an metropolitan.The results show that,firstly,both LCZs and LST had significant spatiotemporal variations and synchrony.The period when the most LCZs were converted was also the LST rose the fastest,and the spatial growth of the LST coincided with the spatial expansion of the built type LCZs.Secondly,the LST difference between land cover type LCZs and built type LCZs gradually widened.And LST rose more in both built type LCZs transferred in and out.Finally,the Xi’an-Xianyang profile showed that the maximum temperature difference between the peaks and valleys of the LST increased by 4.39℃,indicating that localized high temperature phenomena and fluctuations in the urban thermal environment became more pronounced from 2000 to 2019.

Influence of low temperature on lethal time extension for different life stages of Cryptolestes ferrugineus (Stephens) with strong resistance to phosphine fumigation

Knowing the time extension degree of full mortality in phosphine fumigation at low temperature significantly contributes to successful insect pest control,especially for reducing fumigation failure and inhibiting resistance development.The comparison ofmortality and lethal time on eggs,larvae,pupae and adults of Cryptolestes ferrugineus(Stephens)was conducted,and the strain with 1043 times of resistance factor to phosphine was assayed during fumigation with 300 mL/m^3 of phosphine concentration at 18,23 and 28℃.The LT50 values to eggs,larvae,pupae and adults of C.ferrugineus at 18℃ were postponed by 2,2,1 and 5 d comparedwith that at 23℃,and 5,4,5 and 7 d compared with that at 28℃,respectively.The LT99 values to eggs,larvae,pupae and adults at 18℃ were 5,1,2 and 7 d longer than that at 23℃,and 6,5,5 and 10 d longer than that at 28℃,respectively.The lethal time of different life stages of the C.ferrugineus strain significantly increased with temperature decreasing.The exposure time of full mortality on pupae at 300 mL/m^3 of phosphine at 18℃ reached 38 d,which was 12 d longer than that of larvae.The order of tolerance of different life stages of C.ferrugineus exposed to 300 mL/m^3 phosphine from high to low was pupae,eggs,adults,larvae at tested temperatures.

TIME-TEMPERATURE-STRESS EQUIVALENCE AND ITS APPLICATION TO NONLINEAR VISCOELASTIC MATERIALS

Stress-dependence of the intrinsic time of viscoelastic materialsis investigated. The influence of stress level on the intrinsic timeis considered to be similar to that of temperature, pressure, solventcon- centration, damage and physical aging. Thetime-temperature-stress equivalence principle is proposed, byemploying which, the creep curves at different temperatures andstress level can be shifted into a master curve at referencetemperature and stress level.

The Effect of Time and Temperature Variables on Some Routine Coagulation Tests among Subjects of African Descent in Sokoto, North Western Nigeria

This study evaluated the effects of time and temperature variables on routine Pro-thrombin Time test and Activated Partial Thromboplastin Time (APTT) test among subjects of African descent in Sokoto, North Western Nigeria. Samples of 99 subjects made up of 49 male and 50 female subjects with mean age 38.3 ± 22.3 years. Coagulation tests were performed immediately specified times after phlebotomy up to 24 hours (0, 1, 2, 3, 4 and 24 hours at room temperature of 40 degrees C. Our data demonstrate that prothrombin time and APTT results are stable for up to 2 hours, remaining constant regardless of storage conditions. Post hoc tests using Bonferroni correction revealed that there were increases in PT time from 0 hour to 4 hours (17.82 ± 0.61 seconds vs 18.30 ± 0.59 seconds, respectively), from 0 hour to 24 hours (17.82 ± 0.61 seconds vs 18.48 ± 0.59 seconds, respectively), from 2 hours to 4 hours (17.89 ± 0.58 seconds vs 18.30 ± 0.59 seconds), from 2 hours to 24 hours (17.89 ± 0.58 seconds vs 18.48 ± 0.58 seconds), which were all statistically significant (p = 0.002 and p < 0.000, p < 0.000, p < 0.000, respectively). However, the increase in PT time from 0 hour to 2 hours (17.82 ± 0.61 seconds vs 17.89 ± 0.59 seconds, respectively) and from 4 hours to 24 hours (18.30 ± 0.59 vs 18.48 ± 0.59 seconds, respectively) were not statistically significant (p = 1, p = 0.428). A repeated measure ANOVA determined that mean PTTK time differed statistically significantly between time points F (3, 291) = 119.22, p < 0.001. Post hoc tests using Bonferroni correction revealed that there were increase in PTTK time from 0 hour to 2 hours (37.86 ± 1.04 seconds vs 39.94 ± 1.07 seconds, respectively), from 0 hour to 4 hours (37.86 ± 1.04 seconds vs 42.34 ± 1.11 seconds, respectively), from 0 hours to 24 hours (37.86 ± 1.04 seconds vs 44.93 ± 1.20 seconds), from 2 hours to 4 hours (39.94 ± 1.07 seconds vs 42.34 ± 1.11 seconds), from 2 hours to 24 hours (39.94 ± 1.07 seconds vs 44.93 ± 1.20 seconds) and from 4 hours to 24 hours (42.43 ± 1.11 vs 44.93 ± 1.20 seconds), which were all statistically significant at p < 0.001). Therefore, we conclude that there are no statistically significant differences in the PT and APTT between 0 and 2 hours. A longer timing (after 2 hours) from phlebotomy collection of blood from respondents elicited a statistically significant increase in the PT and APTT result. There were no statistically significant differences in the PT and APTT result determined 4 hours and 24 hours after phlebotomy. Longer timing from collection of blood from respondents elicited a statistically significant increment/increase in the clotting time using PTTK. Our data demonstrate that PT and APTT results are stable for 2 hours remaining constant regardless of storage conditions.

Research for time-temperature equivalence effect of rock(Ⅰ):Theory research

In order to know about the rheological properties of rock in a long range of the time scale,method of increasing temperature was brought forward to accelerate the rheological process of rock,which could extend the time scale of experimental test data.Firstly,based on the generalized linear viscoelastic constitutive equation with temperature variable,the creep behavior of rock was divided into three types according to the different strain dependences of the time,that is,Hookean deformation,Newtonian flow,and retarded elasticity.Then the general equivalence relationship between time parameter and temperature parameter was derived for each type of strain.Finally,the relation between time parameter and temperature parameter in the whole creep was considered and the general theory of time-temperature equivalence effect(TTEE) of rock was established.This research reveals: ①The temperature effect on the instantaneous strain could be modified through vertical shift.②The key point of the TTEE of Newtonian flow depends on whether in the study of linear viscoelastic behavior of rock change of temperature is completely equivalent to a shift of the logarithmic time scale or not.③By plotting the results of a creep experiment performed at different temperatures and comparing the curves obtained,one can decide whether the rock considered have TTEE.④The TTEE of the whole creep should satisfy that the horizontal shift function of Newtonian flow and retarded elasticity is consentaneous.