Indoor Formaldehyde Removal Techniques through Paints: Review

Due to its ability to cause illnesses and discomfort even at low concentrations, formaldehyde pollution of indoor air poses a significant risk to human health. Sources of formaldehyde in indoor environments include textiles, paints, wallpapers, glues, adhesives, varnishes, and lacquers;furniture and wooden products like particleboard, plywood, and medium-density fiberboard that contain formaldehyde-based resins;shoe products;cosmetics;electronic devices;and other consumer goods like paper products and insecticides. According to the World Health Organisation, indoor formaldehyde concentrations shouldn’t exceed 0.1 mg/m3. The methods include membrane separation, plasma, photocatalytic decomposition, physisorption, chemisorption, biological and botanical filtration, and catalytic oxidation. Materials based on metal oxides and supported noble metals work as oxidation catalysts. Consequently, a paint that passively eliminates aldehydes from buildings can be developed by adding absorbents and formaldehyde scavengers to the latex composition. It will be crucial to develop techniques for the careful detection and removal of formaldehyde in the future. Additionally, microbial decomposition is less expensive and produces fewer pollutants. The main goal of future research will be to develop a biological air quality control system that will boost the effectiveness of formaldehyde elimination. The various methods of removing formaldehyde through paints have been reviewed here, including the use of mixed metal oxides, formaldehyde-absorbing emulsions, nano titanium dioxide, catalytic oxidation, and aromatic formaldehyde abating materials that can improve indoor air quality.

De Novo Synthesis of Biopaint Using Transformed Bacteria: Analysis of Spectral Intensity Trends and Comparison to Commercial Paint

Background: Commercial paint pigments contain toxic heavy metals that harm humans and pollute the environment. To mitigate these harms, ecologically safe pigments are necessary. Objective: This experiment aims to create a biopaint de-novo using transformed Escherichia coli bacteria and compare it to commercial paint. Methods: Genetically engineered E. coli bacteria producing magenta pigment were grown in petri dishes. The pigment protein was extracted, filtered, and dehydrated into a crystalline powder. This was mixed with acrylic medium to make biopaint. The biopaint and commercial paint were applied on acrylic paper;red, green, blue, and total spectral intensities were measured daily under different testing conditions. Spectral intensity variability was measured and compared using the Coefficient of Variation (CV). Trends in spectral intensity were analyzed using regression analysis. Results: The differences in the CV of biopaint to commercial paint were less than 20% under all testing conditions. Spectral intensities for both biopaint and commercial paint did not show any significant change during the testing period under the conditions of room temperature, heat, and humidity. However, under the cold testing condition, biopaint showed a slight but statistically significant (p-value Conclusion: This experiment proves that E. coli-derived pigments can be used to make biopaint which has a similar durability to commercial paint as measured by the spectral intensities.

Investigation of the Film Formation in Dynamic Air Spray Painting

To accurately predict the film thickness distribution during dynamic spraying performed with air guns and support accordingly the development of intelligent spray painting,the spray problem was analyzed numerically.In particular,the Eulerian-Eulerian approach was employed to calculate the paint atomization and film deposition process.Different spray heights,spray angles,spray gun movement speeds,spray trajectory curvature radii,and air pressure values were considered.Numerical simulation results indicate that the angle of spray painting significantly affects the velocity of droplets near the spray surface.With an increase in the spraying angle,spraying height and spray gun movement speed,the maximum film thickness decreases to varying degrees,and the uniformity of the film thickness also continuously worsens.When the spray gun moves along an arc trajectory,at smaller arc radii,the film thickness on the inside of the arc is slightly greater than that on the outside,but the impact on the maximum film thickness is minimal.Increasing air pressure expands the coating coverage area,results in finer atomization of paint droplets,and leads to a thinner and a more uniform paint film.However,if the pressure is too high,it can cause paint splattering.Using the orthogonal experimental method,multiple sets of simulation calculations were conducted,and the combined effects of spraying height,spray angle,and spray gun movement speed on the film thickness distribution were comprehensively analyzed to determine optimal configurations.Finally,the reliability of the numerical simulations was validated through dynamic spray painting experiments.

Drishti Paint 3.2:a new open-source tool for both 2D and 3D segmentation

X-ray computed tomography(CT)has been an important technology in paleontology for several decades.It helps researchers to acquire detailed anatomical structures of fossils non-destructively.Despite its widespread application,developing an efficient and user-friendly method for segmenting CT data continues to be a formidable challenge in the field.Most CT data segmentation software operates on 2D interfaces,which limits flexibility for real-time adjustments in 3D segmentation.Here,we introduce Curves Mode in Drishti Paint 3.2,an open-source tool for CT data segmentation.Drishti Paint 3.2 allows users to manually or semi-automatically segment the CT data in both 2D and 3D environments,providing a novel solution for revisualizing CT data in paleontological studies.

Co-pyrolysis of Sewage Sludge with Paint Sludge: Kinetics and Thermodynamic Analysis via Iso-conversional Methods

This study explored the synergistic interaction of sewage sludge(SS)and automotive paint sludge(PS)during co-pyrolysis for the optimized treatment of sewage sludge in cement kiln systems,utilizing thermogravimetric analysis(TGA)and thermogravimetric-mass spectrometry(TGA-MS).The result reveals the coexisting synergistic and antagonistic effects in the co-pyrolysis of SS/PS.The synergistic effect arises from hydrogen free radicals in SS and catalytic components in PS,while the main source of the antagonistic effect is that,during the mechanical mixing process,the SS/PS is converted from the particulate form into a dough-like rubbery which contributes to the film-forming effect,hindering the volatilization of volatile components.SS/PS co-pyrolysis reduces the yielding of tar production while increasing coke and gas.This study will provide some in-depth insights into the co-pyrolysis of SS/PS,and offer theoretical support for the subsequent research on the collaborative disposal processes in cement kilns.

Improved Scatter Search Algorithm for Multi-skilled Personnel Scheduling of Ship Block Painting

This paper focuses on the optimization method for multi-skilled painting personnel scheduling.The budget working time analysis is carried out considering the influence of operating area,difficulty of spraying area,multi-skilled workers,and worker’s efficiency,then a mathematical model is established to minimize the completion time. The constraints of task priority,paint preparation,pump management,and neighbor avoidance in the ship block painting production are considered. Based on this model,an improved scatter search(ISS)algorithm is designed,and the hybrid approximate dynamic programming(ADP)algorithm is used to improve search efficiency. In addition,the two solution combination methods of path-relinking and task sequence combination are used to enhance the search breadth and depth. The numerical experimental results show that ISS has a significant advantage in solving efficiency compared with the solver in small scale instances;Compared with the scatter search algorithm and genetic algorithm,ISS can stably improve the solution quality. Verified by the production example,ISS effectively shortens the total completion time of the production,which is suitable for scheduling problems in the actual painting production of the shipyard.

The Study of “Imitation” Aesthetics in Ancient Painting Theory-Taking the Chinese and Western Sources as an Example

The theory of“imitation”in painting occupies a leading position in western art,which originated from the theory of“imitation”in ancient Greece,and has become one of the art theories affecting the world through the continuous development of later generations.Through the exploration of the source of“imitation”in China and the West,there are some comments on the meaning of“imitation”in Chinese classical painting theory,such as“transfer model writing”and“image form”,which is obvious differences from the west.Traditional Chinese painting is a combination of careful observation of natural things and subjective emotions to express their own aesthetic feelings,and ultimately form a vivid artistic conception.Modern imitation is borrowed from Western imitation.In fact,imitation in traditional painting has its own meaning,which contains Chinese aesthetic thought.“Imitation”aesthetics is unique in traditional Chinese painting and is the most important form of painting art.

Analysis of Color and Artistic Conception in Painting Art

The charm of painting,as a bright pearl in the treasure house of culture,lies in its visual language constructed through colors and lines,which conveys the artist’s unique perception of life and profound emotions.Color,as the most intuitive and expressive language in painting,is not only a simple reproduction of material colors but also a projection of the artist’s inner world.Artistic conception,as a core concept in traditional Chinese painting theory,refers to the emotional atmosphere and spiritual mood embedded in paintings.The purpose of this paper is to discuss the interaction between color and mood in painting art,to analyze the techniques of using color in different painting styles and their influence on the creation of mood,and to provide new perspectives and methods for the creation of paintings.

Exploration of the Expression of Color Emotion in Oil Painting Sketch Creation

This paper deeply analyzes the expression of color emotion in oil painting sketch creation.Starting with the three basic attributes of color theory(hue,lightness,and purity),this paper discusses its emotional symbolic significance and the relationship between contrast and harmony.By interpreting the works of artists such as Van Gogh’s Sunflower,Monet’s Rouen Cathedral,and Cézanne’s Mont Sainte-Victoire,this paper shows the unique charm of different colors in conveying emotions,creating atmosphere,and expressing themes.At the same time,it is expounded that in the creation of an oil painting sketch,the effective expression of color emotion can be realized by observing nature,using subjective colors,and reasonable composition and layout of colors,so as to enhance the artistic value of the works.

Analysis of Viewing Paintings from the Perspective of Iconography

Distinguished from purely formalistic research methods,iconography pursues the interpretation of the hidden historical and humanistic connotations behind artworks,and is a discipline that combines visual text and content analysis methods.Combining the three stages of iconography proposed by Panofsky,the paper studies Shizeng Chen’s Viewing Paintings from the perspective of iconography,summarizing the formation and change of the images and contents of the artworks in the cultural system and civilization at that time,as well as their implied ideology,and analyzing the hidden spirit of the times and the historical significance behind them,so as to expound their iconographic significance.Through an in-depth discussion at three levels:pre-pictorial iconographic description,iconographic analysis,and iconographic interpretation,the facts and surface contents reproduced in the images,the traditional level of literary,artistic,and cultural knowledge,as well as the interpretation of the potential meanings are revealed.

Color Expression and Mood Creation in Imagery Oil Painting

Oil painting is a traditional Western painting form.With the introduction of China and the influence of China’s traditional painting and aesthetics,the painting style became more distinctive,expanding a new development direction of oil painting,and thus imagery oil painting came into being.Color,as the most important element in imagery oil painting,mainly plays the role of mood creation and emotional expression.Many creators are good at injecting their thoughts and emotions into the paintings through color matching,so as to enhance the artistic expression of the paintings.This paper analyzes the color expression characteristics of imagery oil painting and explores the color expression techniques in imagery oil painting and mood creation of imagery oil painting from several aspects.

Measurements of Formaldehyde and TVOC Emission from Paints and Coating Materials using Small Chamber Method for Building Composites

An optimal test method for paint is proposed; additionally, the Field and Laboratory Emission Cell （FLEC） method used in Europe is applied as a substitute for the 20 L small chamber method. The emission factors of total volatile organic compounds （TVOC） and formaldehyde from oil-based paint, emulsion paint, and water-dispersion paint with a coating weight of 300 g/m2, cured for 24/48 hours, were measured using the 20 L small chamber method. The emission rate of TVOC and formaldehyde from all paints began to stabilize after approximately 7 days after 24/48 hours of curing even though Korean standards stipulate that paint should be measured and analyzed after the third day of application. The emission factor of TVOC and formaldehyde from oil-based, emulsion, and water-dispersion paints were also measured using the FLEC method. There was good correlation between the 20 L small chamber method and the FLEC method for oil-based, emulsion, and water-dispersion paint emissions. With the FLEC method, using paints prepared under identical conditions, the emission rate was stable 24 hours after installation of samples because the air flow rate of FLEC is much higher than that of a 20 L small chamber, and the relative cell volume of FLEC is much smaller than that of a 20 L small chamber.

Thermal Error Modeling Method with the Jamming of Temperature-Sensitive Points'Volatility on CNC Machine Tools

Aiming at the deficiency of the robustness of thermal error compensation models of CNC machine tools, the mechanism of improving the models＇ robustness is studied by regarding the Leaderway-V450 machining center as the object. Through the analysis of actual spindle air cutting experimental data on Leaderway-V450 machine, it is found that the temperature-sensitive points used for modeling is volatility, and this volatility directly leads to large changes on the collinear degree among modeling independent variables. Thus, the forecasting accuracy of multivariate regression model is severely affected, and the forecasting robustness becomes poor too. To overcome this effect, a modeling method of establishing thermal error models by using single temperature variable under the jamming of temperature-sensitive points＇ volatility is put forward. According to the actual data of thermal error measured in different seasons, it is proved that the single temperature variable model can reduce the loss of fore- casting accuracy resulted from the volatility of tempera- ture-sensitive points, especially for the prediction of cross quarter data, the improvement of forecasting accuracy is about 5 μm or more. The purpose that improving the robustness of the thermal error models is realized, which can provide a reference for selecting the modelingindependent variable in the application of thermal error compensation of CNC machine tools.

Numerical Study on the Hydrodynamic Performance of Antifouling Paints

This study presents a simple numerical method that can be used to evaluate the hydrodynamic performances of antifouling paints.Steady Reynolds-averaged Navier-Stokes equations were solved through a finite volume technique,whereas roughness was modeled with experimentally determined roughness functions.First,the methodology was validated with previous experimental studies with a flat plate.Second,flow around the Kriso Container Ship was examined.Lastly,full-scale results were predicted using Granville’s similarity law.Results indicated that roughness has a similar effect on the viscous pressure resistance and frictional resistance around a Reynolds number of 10^7.Moreover,the increase in frictional resistance due to roughness was calculated to be approximately 3%-5%at the ship scale depending on the paint.

Plant Temperature for Sterile Alteration of a Temperature-Sensitive Genic Male Sterile Rice,Peiai64S

The forecast of sterile alteration for the temperature-sensitive genic male sterile （TGMS） line in two-line hybrid rice seed production was traditionally based on screen temperature determined by weather station. The article put forward a new approach based on plant temperature, which was more exact and direct than the traditional method. The result of the simulation of the self-seeded setting rate of a widely used TGMS line, Peiai64S, by several temperature parameters and durations, showed that the fertility was directly affected by the plant temperature at a height of 20 cm or the air temperature around it in three days duration. Using the stem temperature of three days at a height of 20 cm as the simulation parameter, the fertility of Peiai64S had the maximum, minimum and optimum temperatures as 22.8, 21.7 and 22.5℃, respectively, whereas 23.2, 21.5 and 21.8℃ when using the air temperature of three days around the height of 20 cm as the parameter. Such temperature indices can be used to conclude the sterile alteration of TGMS for safeguarding seed production of twoline hybrid rice. The article also established a statistic model to conclude plant temperature by water temperatures at inflow and outflow, and air temperature and cloudage from weather station.

Performance of Local Clay-Titanium Dioxide Core-Shell Extender Pigments in Alkyd Paints

The performance of local clay-titanium dioxide core-shell extender pigments in alkyd paints has been studied. The physico-mechanical properties of the prepared alkyd paints were evaluated according to ASTM measurements. The effects of various environmental and corrosive factors on the paints were also studied. The study showed that the alkyd paint samples formulated using the core-shell pigments generally had low specific gravity (1.30 – 1.38), an indication that more of the core-shell pigments can be incorporated into the alkyd paints with considerable cost savings. The dry film thicknesses of the paint samples falls within 0.24 - 0.39 mm, suggesting that the samples will perform well as anticorrosive coatings and their adhesion properties are generally good, showing that they can withstand abrasive and corrosive agents. The core-shell extender pigments formulated paint samples were observed to exhibit the best dust-free, tack-free, and through dry times compared to TiO2 paint formulation. The formulated paint samples generally performed well on exposure to rain and sunlight as well as in distilled water, 2% Na2CO3, and 2% H2SO4 with only TiO2 paint formulation exhibiting rust. The good paint performance characteristics obtainable with the core-shell extender pigments are enough evidence to justify their utilization in the surface coatings industry. The performances of these core-shell extender pigments in alkyd paints have shown that they combine the properties of both the clays and titanium dioxide, and have the potential to overcome their disadvantages.

Comparative Toxicity of “Tin Free” Self-Polishing Copolymer Antifouling Paints and Their Inhibitory Effects on Larval Development of a Non-Target Organism

Toxic substances released as a result of leaching from painted surfaces to the aquatic environment affect both fouling organisms and “non-target” biota. Artemia fransiscana nauplii have been considered a useful test system for the examination of toxicity for antifouling paints. In this study, we examined the effect of four “tin free” self-polishing copolymer (SPC) antifouling paints on the larval development of Artemia nauplii. Based on the L(S/V)50 values the order of toxicity of the antifouling paints was: ANTI F > SHARKSKIN > OCEAN T/F > MICRON. Furthermore, the body size of Artemia nauplii was significantly affected at lethal and above lethal L(S/V)5024h values. The body size of 48 h-aged nauplii exposed for the last 24 hours to each of the four SPC antifouling paints was significantly lower than that of the 48 h-aged controls (0.88 ± 0.030 mm). In addition, the body size of 72 h-aged nauplii maintained for the last 24 hours to pure synthetic seawater after exposure for 24 hours to each of the four SPC antifouling paints was significantly lower than that of the 72 h-aged controls (0.96 ±0.027 mm). Overall, the SPCs examined here were substantially toxic to Artemia nauplii, but with different toxicities and modes of action, as a result of the synergistic action of distinct components of the antifouling paints.

Respiratory Sensitization &Sickness from Welding/Burning Isocyanate Containing Paints

The purpose of this paper is to make the environmental and occupational health community aware of a serious health risk associated with the common practice of burning industrial paint off of metal surfaces during or prior to welding. On four occasions bystanders and welder/burner personnel have experienced illness as a result of being exposed to the combustion products of isocyanate paints that were being burned off metal surfaces. In each case, the burning and the exposed people were outside in an open environment where the health risk was thought to be minimal due to the open environment with nominal wind movement through the work area. In one case, the person (a burner) developed permanent sensitization to phthalic anhydride as a result of the exposure. Phthalic anhydride was determined to be decomposition product of burned isocyanate paint. In the other three cases (which involved very short exposures), between two and six people became ill but did not develop sensitization. Their symptoms included dizziness, nausea, headache, and breathing difficulty the severity of which varied from very uncomfortable to temporarily incapacitating. This paper discusses the circumstances associated with each event, the approach used to determine that phthalic anhydride was a decomposition product, and some practical things that can be done to avoid having employees become victims of exposure.

Preparation and Properties of Hydroxyethyl Methacrylate Chemically Modified Temperature-Sensitive Microgels

A novel series of poly(N-isopropylacrylamide-co-hydroxyethyl methacrylate) (p(NIPAM-co-HEMA)) microgels were prepared through precipitation polymerization. Nuclear magnetic resonance (NMR), transmission electron microscopy (TEM), ultraviolet-visible spectroscopy (UV) and dynamic light scattering (DLS) were employed to characterize the microgels. The experimental results indicate that the prepared microgels with narrow distribution remain good temperature sensitivity after incorporation of functional-OH groups. In marked contrast to the general rule, incorporation of hydrophilic HEMA makes the volume-phase-transition temperature shift to the lower temperature due to the strong intermolecular H-bonding between amide and -OH groups, -OH and -OH groups.

Characterization of the role of Smu1 in nuclear localization of splicing factors in the mammalian temperature-sensitive mutant

A temperature-sensitive (ts) mutant of the CHO-K1 cell line, tsTM18, grows at 340C but not at 390C. Smu1 is the gene responsible for ts defects of tsTM18 cells. Previously, we found that the Smu1 ts defect altered the localization (as indicated by enlargement of speckles) of SRSF1 (SF2/ASF) in tsTM18 cells cultured at 390C, suggesting a functional association between Smu1 and SRSF1. Speckles are subnuclear structures that may function as storage/assembly/ modification compartments to supply splicing factors to active transcription sites. The effect of the ts defect of Smu1 on the localization of other factors related to splicing has not been characterized yet. The mechanisms underlying the enlargement of speckles of SRSF1 remain unclear. In the present study, we found that the ts defect of Smu1 affected the nuclear localization of a splicing factor, SRSF2 (SC35), and factors involved in the exon-exon junction complex, Y14 and ALY. Reverse transcription-polymerase chain reaction (RT-PCR) analysis revealed that the ts defect of Smu1 affected alternative splicing of endogenous Clk1/ Sty and SRSF2 genes. Mammalian Clk family kinases are shown to phosphorylate serine/arginine (SR) proteins in vitro and SRSF1 in vivo. RT-PCR analysis of Clk1/Sty showed an accumulation of the truncated form lacking kinase activity in tsTM18 cells incubated at 39?C. These data indicate that an accumulation of kinase-negative Clk1/Sty may lead to alteration of the localization of factors related to splicing resulting in the enlargement of speckles.