Contribution of Surface Waves to Sea Surface Temperatures in the Arctic Ocean

The aim of our study was to examine the contribution of surface waves from WAVEWATCH-III(WW3)to the variation in sea surface temperature(SST)in the Arctic Ocean.The simulated significant wave height(SWH)were validated against the products from Haiyang-2B(HY-2B)in 2021,obtaining a root mean squared error(RMSE)of 0.45 with a correlation of 0.96 and scatter index of 0.18.The wave-induced effects,i.e.,wave breaking and mixing induced by nonbearing waves resulting in changes in radiation stress and Stokes drift,were calculated from WW3,ERA-5 wind,SST,and salinity data from the National Centers for Environmental Prediction and were taken as forcing fields in the Stony Brook Parallel Ocean Model.The results showed that an RMSE of 0.81℃ with wave-induced effects was less than the RMSE of 1.11℃ achieved without the wave term compared with the simulated SST with the measurements from Argos.Considering the four wave effects and sea ice freezing,the SST in the Arctic Ocean decreased by up to 1℃ in winter.Regression analysis revealed that the SWH was linear in SST(values without subtraction of waves)in summer and autumn,but this behavior was not observed in spring or winter due to the presence of sea ice.The interannual variation also presented a negative relationship between the difference in SST and SWH.

Climate warming is significantly influenced by rising summer maximum temperatures: insights from tree-ring evidence of the Western Tianshan Mountains, China

As one of the regions most affected by global cli-mate warming,the Tianshan mountains has experienced sev-eral ecological crises,including retreating glaciers and water deficits.Climate warming in these mountains is considered mainly to be caused by increases in minimum temperatures and winter temperatures,while the influence of maximum temperatures is unclear.In this study,a 300-year tree-ring chronology developed from the Western Tianshan Moun-tains was used to reconstruct the summer(June-August)maximum temperature(T_(max6-8))variations from 1718 to 2017.The reconstruction explained 53.1% of the variance in the observed T_(max6-8).Over the past 300 years,the T_(max6-8)reconstruction showed clear interannual and decadal vari-abilities.There was a significant warming trend(0.18°C/decade)after the 1950s,which was close to the increasing rates of the minimum and mean temperatures.The increase in maximum temperature was also present over the whole Tianshan mountains and its impact on climate warming has increased.The T_(max6-8) variations in the Western Tianshan mountains were influenced by frequent volcanic eruptions combined with the influence of solar activity and the sum-mer North Atlantic Oscillation.This study reveals that cli-mate warming is significantly influenced by the increase in maximum temperatures and clarifies possible driving mech-anisms of temperature variations in the Western Tianshan mountains which should aid climate predictions.

Climate warming is significantly influenced by rising summer maximum temperatures:insights from tree-ring evidence of the Western Tianshan Mountains,China

As one of the regions most affected by global climate warming,the Tianshan mountains has experienced several ecological crises,including retreating glaciers and water deficits.Climate warming in these mountains is considered mainly to be caused by increases in minimum temperatures and winter temperatures,while the influence of maximum temperatures is unclear.In this study,a 300-year tree-ring chronology developed from the Western Tianshan Mountains was used to reconstruct the summer(June-August)maximum temperature(Tmax6-8) variations from 1718 to2017.The reconstruction explained 53.1% of the variance in the observed Tmax6-8.Over the past 300 years,the Tmax6-8reconstruction showed clear interannual and decadal variabilities.There was a significant warming trend(0.18 ℃/decade) after the 1950s,which was close to the increasing rates of the minimum and mean temperatures.The increase in maximum temperature was also present over the whole Tianshan mountains and its impact on climate warming has increased.The Tmax6-8variations in the Western Tianshan mountains were influenced by frequent volcanic eruptions combined with the influence of solar activity and the summer North Atlantic Oscillation.This study reveals that climate warming is significantly influenced by the increase in maximum temperatures and clarifies possible driving mechanisms of temperature variations in the Western Tianshan mountains which should aid climate predictions.

Using satellite-derived land surface temperatures to clarify the spatiotemporal warming trends of the Alborz Mountains in northern Iran

The Alborz Mountains are some of the highest in Iran,and they play an important role in controlling the climate of the country’s northern regions.The land surface temperature(LST)is an important variable that affects the ecosystem of this area.This study investigated the spatiotemporal changes and trends of the nighttime LST in the western region of the Central Alborz Mountains at elevations of 1500-4000 m above sea level.MODIS data were extracted for the period of 2000-2021,and the Mann-Kendall nonparametric test was applied to evaluating the changes in the LST.The results indicated a significant increasing trend for the monthly average LST in May-August along the southern aspect.Both the northern and southern aspects showed decreasing trends for the monthly average LST in October,November,and March and an increasing trend in other months.At all elevations,the average decadal change in the monthly average LST was more severe along the southern aspect(0.60°C)than along the northern aspect(0.37°C).The LST difference between the northern and southern aspects decreased in the cold months but increased in the hot months.At the same elevation,the difference in the lapse rate between the northern and southern aspects was greater in the hot months than in the cold months.With increasing elevation,the lapse rate between the northern and southern aspects disappeared.Climate change was concluded to greatly decrease the difference in LST at different elevations for April-July.

Predictive modeling of critical temperatures in magnesium compounds using transfer learning

This study presents a transfer learning approach for discovering potential Mg-based superconductors utilizing a comprehensive target dataset.Initially,a large source dataset(Bandgap dataset)comprising approximately∼75k compounds is utilized for pretraining,followed by fine-tuning with a smaller Critical Temperature(T_(c))dataset containing∼300 compounds.Comparatively,there is a significant improvement in the performance of the transfer learning model over the traditional deep learning(DL)model in predicting Tc.Subsequently,the transfer learning model is applied to predict the properties of approximately 150k compounds.Predictions are validated computationally using density functional theory(DFT)calculations based on lattice dynamics-related theory.Moreover,to demonstrate the extended predictive capability of the transfer learning model for new materials,a pool of virtual compounds derived from prototype crystal structures from the Materials Project(MP)database is generated.T_(c) predictions are obtained for∼3600 virtual compounds,which underwent screening for electroneutrality and thermodynamic stability.An Extra Trees-based model is trained to utilize E_(hull)values to obtain thermodynamically stable materials,employing a dataset containing Ehull values for approximately 150k materials for training.Materials with Ehull values exceeding 5 meV/atom were filtered out,resulting in a refined list of potential Mg-based superconductors.This study showcases the effectiveness of transfer learning in predicting superconducting properties and highlights its potential for accelerating the discovery of Mg-based materials in the field of superconductivity.

A strength model for cement-stabilized mud subjected to various curing temperatures and its early-stage quality control

The influence of curing temperature on the strength development of cement-stabilized mud has been well documented in terms of strength-increase rate and ultimate strength.However,the strength development model is not mature for the extremely early stages.In addition,there is a lack of studies on quality control methods based on early-stage strength development.This paper presents a strength model for cement-stabilized mud to address these gaps,considering various curing temperatures and early-stage behaviors.In this study,a series of laboratory experiments was conducted on two types of muds treated with Portland blast furnace cement and ordinary Portland cement under four different temperatures.The results indicate that elevated temperatures expedite strength development and lead to higher long-term strength.The proposed model,which combines a three-step conversion process and a hyperbolic model at the reference temperature,enables accurate estimate of the strength development for cement-treated mud with any proportions cured under various temperatures.With this model,a practical early quality control method is introduced for applying cement-stabilized mud in field projects.The back-analysis parameters obtained from a 36-h investigation at temperature of 60C demonstrated a sufficient accuracy in predicting strength levels in practical applications.

Dependence of impact regime boundaries on the initial temperatures of projectiles and targets

Towards higher impact velocities,ballistic events are increasingly determined by the material temperatures.Related effects might range from moderate thermal softening to full phase transition.In particular,it is of great interest to quantify the conditions for incipient or full melting of metals during impact interactions,which result in a transition from still strength-affected to hydrodynamic material behavior.In this work,we investigate to which extent the respective melting thresholds are also dependent on the initial,and generally elevated,temperatures of projectiles and targets before impact.This is studied through the application of a model developed recently by the authors to characterize the transition regime between high-velocity and hypervelocity impact,for which the melting thresholds of materials were used as the defining quantities.The obtained results are expected to be of general interest for ballistic application cases where projectiles or targets are preheated.Such conditions might result,for example,from aerodynamic forces acting onto a projectile during atmospheric flight,explosive shapedcharge-jet formation or armor exposure to environmental conditions.The performed analyses also broaden the scientific understanding of the relevance of temperature in penetration events,generally known since the 1960s,but often not considered thoroughly in impact studies.

Sandwich probe temperature sensor based on In_(2)O_(3)-IZO thin film for ultra-high temperatures

High-temperature thin-film thermocouples(TFTCs)have attracted significant attention in the aerospace and steel metallurgy industry.However,previous studies on TFTCs have primarily focused on the two-dimensional planar-type,whose thermal sensitive area has to be perpendicular to the test environment,and therefore affects the thermal fluids pattern or loses accuracy.In order to address this problem,recent studies have developed three-dimensional probe-type TFTCs,which can be set parallel to the test environment.Nevertheless,the probe-type TFTCs are limited by their measurement threshold and poor stability at high temperatures.To address these issues,in this study,we propose a novel probe-type TFTC with a sandwich structure.The sensitive layer is compounded with indium oxide doped zinc oxide and fabricated using screen-printing technology.With the protection of sandwich structure on electrode film,the sensor demonstrates robust high-temperature stability,enabling continuous working at 1200℃ above 5 h with a low drift rate of 2.3℃·h^(−1).This sensor exhibits a high repeatability of 99.3% when measuring a wide range of temperatures,which is beyond the most existing probe-type TFTCs reported in the literature.With its excellent high-temperature performance,this temperature sensor holds immense potentials for enhancing equipment safety in the aerospace engineering and ensuring product quality in the steel metallurgy industry.

Higher Grain-Filling Rate in Inferior Spikelets of Tolerant Rice Genotype Offset Grain Yield Loss under Post-Anthesis High Night Temperatures

Increased nighttime respiratory losses decrease the amount of photoassimilates available for plant growth and yield. We hypothesized that the increased respiratory carbon loss under high night temperatures(HNT) could be compensated for by increased photosynthesis during the day following HNT exposure. Two rice genotypes, Vandana(HNT-sensitive) and Nagina 22(HNT-tolerant), were exposed to HNT(4 ℃ above the control) from flowering to physiological maturity. They were assessed for alterations in the carbon balance of the source(flag leaf) and its subsequent impact on grain filling dynamics and the quality of spatially differentiated sinks(superior and inferior spikelets). Both genotypes exhibited significantly higher night respiration rates. However, only Nagina 22 compensated for the high respiration rates with an increased photosynthetic rate, resulting in a steady production of total dry matter under HNT. Nagina 22 also recorded a higher grain-filling rate, particularly at 5 and 10 d after flowering, with 1.5- and 4.0-fold increases in the translocation of ^(14)C sugars to the superior and inferior spikelets, respectively. The ratio of photosynthetic rate to respiratory rate on a leaf area basis was negatively correlated with spikelet sterility, resulting in a higher filled spikelet number and grain weight per plant, particularly for inferior grains in Nagina 22. Grain quality parameters such as head rice recovery, high-density grains, and gelatinization temperature were maintained in Nagina 22. An increase in the rheological properties of rice flour starch in Nagina 22 under HNT indicated the stability of starch and its ability to reorganize during the cooling process of product formation. Thus, our study showed that sink adjustments between superior and inferior spikelets favored the growth of inferior spikelets, which helped to offset the reduction in grain weight under HNT in the tolerant genotype Nagina 22.

A molecular dynamics study on mechanical performance and deformation mechanisms in nanotwinned NiCo-based alloys with nano-precipitates under high temperatures

Molecular dynamics simulations are performed to investigate the mechanical behavior of nanotwinned NiCo-based alloys containing coherent L12 nano-precipitates at different temperatures,as well as the interactions between the dislocations and nano-precipitates within the nanotwins.The simulation results demonstrate that both the yield stress and flow stress in the nanotwinned NiCo-based alloys with nano-precipitates decrease as the temperature rises,because the higher temperatures lead to the generation of more defects during yielding and lower dislocation density during plastic deformation.Moreover,the coherent L12 phase exhibits excellent thermal stability,which enables the hinderance of dislocation motion at elevated temperatures via the wrapping and cutting mechanisms of dislocations.The synergistic effect of nanotwins and nano-precipitates results in more significant strengthening behavior in the nanotwinned NiCo-based alloys under high temperatures.In addition,the high-temperature mechanical behavior of nanotwinned NiCo-based alloys with nano-precipitates is sensitive to the size and volume fraction of the microstructures.These findings could be helpful for the design of nanotwins and nano-precipitates to improve the high-temperature mechanical properties of NiCo-based alloys.

Development of a RBFNN prediction model for carrot quality based on meteorological temperatures at vegetable stations

To evaluate and predict the quality of carrots during logistics process in North China under extreme temperature conditions,quality indicator changes of carrots were investigated,and temperature-coupled quality prediction models were developed.Seven temperatures were selected from meteorological temperature data by cluster analysis to simulate the changes in extreme temperatures during the short-term transportation of carrots.No carrots rotted during the 48h storage period.Under both isothermal and nonisothermal conditions,weight loss andΔE increased while the firmness and sensory evaluation(SE)decreased.The RBFNN performed better than the Arrhenius model in predicting weight loss andΔE,with R^(2)>0.97,MSE<0.009 and relative errors within±18%.The results of the predictive confidence level and standardized residual indicated the good performance of the RBFNN model.The temperature-coupled prediction models of RBFNN were promising candidates for predicting the quality of vegetable products and therefore reducing economic loss of vegetable industry.

成熟度和温度对芙蓉李贮藏期间生理生化特性及蜡质结构的影响

为研究成熟度和温度对芙蓉李贮藏期间生理生化特性和果皮蜡质结构的影响,本研究选择2个成熟度(F:约六成熟;S:约八成熟)的芙蓉李,于4、25℃条件下进行试验,分析16个生理生化指标的差异,采用正交偏最小二乘判别法(OPLS-DA)筛选不同成熟度芙蓉李在不同温度贮藏期间的主要差异性指标,检测芙蓉李贮藏前后蜡质结构的变化并分析其贮藏效应。结果表明,4℃条件下F与S之间的主要差异性指标为可溶性固形物含量(SS)、果肉硬度(FF)、果皮色度值a^(*)(PC-a^(*))、花色苷(AC)含量、可滴定酸(TA)含量、果皮硬度(PF),25℃时为SS、超氧化物歧化酶(SOD)活性、PC-a^(*)、果皮色度值b*(PC-b*)。不同成熟度果实的SS含量、PC-a^(*)、AC含量均随贮藏天数增加而逐渐上升(S贮藏28 d除外),同一贮藏天数下AC含量在25℃时显著高于4℃时,同一温度同一贮藏天数时S中的SS含量、PC-a^(*)显著高于F;PF、FF和TA含量随贮藏天数的延长而逐渐下降,4℃和F有利于FF和PF的保持,而25℃下TA含量下降更快;SOD活性随贮藏天数的延长先升高后下降,且在25℃和S中下降更显著。芙蓉李蜡质主要以直立片状晶体和颗粒状结晶的形式存在;两种晶体数量和形态的变化可能影响水分的流失,从而影响细胞壁结构的稳定性,进而影响贮藏性。本研究可为芙蓉李的采收和贮藏保鲜提供技术参考。

基于SSTs情境的服务质量、顾客满意与渠道迁移关系研究综述

在服务营销领域,服务质量与顾客满意、行为意愿之间的关系是多年来学者们关注的对象,并开展了大量的研究。随着信息技术的发展,自助服务技术(SSTs)得到广泛应用,越来越多的企业成为人工服务和自助服务的多渠道服务提供商。在SSTs情境下,让消费者从人工服务转而接受并持续使用自助服务,完成服务渠道的迁移成为企业服务环节的重点。本文对服务质量与顾客态度、行为关系的文献进行了全面回顾和逻辑梳理,并作出了相应评述。在此基础上,结合自助服务技术的内涵和特点,分析自助服务情境下,服务质量与顾客满意、渠道迁移的关系。

Effect of pouring and mold temperatures on hot tearing susceptibility of AZ91D and Mg-3Nd-0.2Zn-Zr Mg alloys

Pouring and mold temperatures are two important parameters during casting magnesium components. The present study examined their influence on hot tearing susceptibility （HTS） of commercial AZ91D and newly developed Mg-3Nd-0.2Zn-Zr （mass fraction, %; NZ30K） magnesium alloys in gravity permanent mold casting condition. The results indicate that mold temperature shows much more significant influence on the HTS of both alloys than pouring temperature whose influence only can be distinguished at low mold temperature （341 K for AZ91D alloy and 423 K for NZ30K alloy）. Hot tearing susceptibility prediction model concerning feeding parameters, grain size and solidification range, is more suitable to estimate the HTS of different magnesium alloys than the model only concerning feeding parameters. In order to achieve better hot tearing resistance, the ranges of pouring and mold temperatures are suggested to be 961-991 K and≥641 K for AZ91D alloy, 1003-1033 K and≥623 K for NZ30K alloy, respectively.

Physiological Characterization of Green Turning of Rice Seedlings at Different Temperatures

Using early indica rice Zhongzao 39 and japonica rice Xiushui 134 as the experimental materials, the effects of 4 temperature levels after transplantation on turning green, leaf growth, tillering, dry matter accumulation and nutrition absorption were studied using a greenhouse and an artificial climate chest. We found that （1） tillering did not occur and growth of one new leaf took over 15 days at 16℃. New leaf growth took over 10 days and tillering occurred after 15 days of transplanta- tion at 19 ℃. Tillering appeared 10 days after planting and new leaf growth took 5 days between 22 and 25 ℃. This showed that low temperature impeded the turn- ing green of rice seedlings and the temperature must reach above 19 ℃ to ensure timely appearance of new leaf, tillering and turning green in rice seedlings. （2） When the temperature was 10 increased, both 100-seedling dry weight and nitrogen absorption increased. At temperatures lower 11 than 19 ℃, both dry weight incre- ment and nitrogen absorption were low. Nitrogen absorption of all organs increased obviously between 19 and 22 ℃. Thus, 19 ℃ was found to be an minimum tem- perature for plant organs to absorb nutrients. （3）Tiller of seedling cultivated on dry- land soil and substrate grew quickly and tillering occurred about 7 days after trans- planting. After that, the growth rate was about 0.18 tiller per day. For seedlings cultivated in slurry, tillering occurred 10 days after transplanting and the tillers grew at a rate of 0.16 tiller per day. However, substrate choice during the seedling rais- ing stage had no significant influence on leaf age. （4） Japonica rice exhibited stronger resistance to low temperature than indica rice. Tillering began at about the same time after transplanting in both rice varieties, but japonica rice exhibited higher tillering speed than early indica rice. The speed of leaf growth was higher in japoni- ca rice before transplantation but higher in indica rice after transplantation.

Recent progress in CO oxidation over Pt-group-metal catalysts at low temperatures

CO oxidation is probably the most studied reaction in heterogeneous catalysis.This reaction has become a hot topic with the discovery of nanogold catalysts,which are active at low temperatures（at or below room temperature）.Au catalysts are the benchmark for judging the activities of other metals in CO oxidation.Pt-group metals（PGMs） that give comparable performances are of particular interest.In this mini-review,we summarize the advances in various PGM（Pt,Pd,Ir,Rh,Ru）catalysts that have high catalytic activities in low-temperature CO oxidation arising from reducible supports or the presence of OH species.The effects of the size of the metal species and the importance of the interface between the metal and the reducible support are covered and discussed in terms of their promotional role in CO oxidation at low temperatures.

高温下HMX热分解反应分子动力学模拟

本文采用ReaxFF-lg反应分子动力学方法研究了奥克托金(HMX)在六种不同温度下的初始反应热分解过程,验证了ReaxFF-lg势函数对HMX体系的适用性,计算了不同温度下HMX体系势能、总物种演化趋势、初始反应产物以及指前因子和活化能.结果表明,HMX热分解过程主要有三种初始分解机理:N-NO_(2)键的断裂,HONO的解离和主环上C-N键的断裂,计算得到的初始分解阶段活化能Ea和指前因子ln(A),与实验值相吻合.

Study on kinetics of propylene polymerizationat different temperatures via Monte Carlo simulation

The elementary reactions of propylene polymerization catalyzed by conventional Ziegler-Natta catalysts was proposed according to the comprehensive view and without considering the effect of any impurity in the material on propylene polymerization. The Monte Carlo simulation technique was employed to investigate the kinetics of propylene polymerization in order to determine the validity of the stationary state assumption and the effects of the polymerization temperature on the polymerization. The simulated total amount of active species, which only increases quickly at the beginning of the polymerization, indicates that the stationary state assumption in the studied system is valid. Moreover, significant effects of polymerization temperature on the polymerization conversion, and the molecular weight and its distribution were also analyzed. The simulated results show that the consumption rate of propylene increases with the increase of polymerization temperature; the maximum values of the number-average degree of polymerization are constant at different polymerization temperatures, however, the peak appears earlier with the higher temperature; as the polymerization temperature increases, the average molecular weight decreases and the molecular weight distribution changes greatly.

Simulation study on non-linear effects of initial melt temperatures on microstructures during solidification process of liquid Mg_7Zn_3 alloy

The non-linear effects of different initial melt temperatures on the microstructure evolution during the solidification process of liquid Mg7Zn3 alloys were investigated by molecular dynamics simulation, The microstructure transformation mechanisms were analyzed by several methods. The system was found to be solidified into amorphous structures from different initial melt temperatures at the same cooling rate of 1×10^12 K/s, and the 1551 bond-type and the icosahedron basic cluster （12 0 12 0 ） played a key role in the microstructure transition. Different initial melt temperatures had significant effects on the final microstructures. These effects only can be clearly observed below the glass transition temperature Tg; and these effects are non-linearly related to the initial melt temperatures, and fluctuated in a certain range. However, the changes of the average atomic energy of the systems are still linearly related with the initial melt temperatures, namely, the higher the initial melt temperature is, the more stable the amorphous structure is and the stronger the glass forming ability will be.

养殖RFID测温定位电子耳标研究——基于智慧农业区块链

首先,介绍了区块链和物联网技术在智慧农业应用的概念;然后,基于结构、温度传感器、RSSI定位和天线等多个模块实现了对测温定位电子耳标的设计;最后,为了验证该RFID测温定位电子耳标的性能,设计了一套放养羊群的养殖信息监测系统,对每只羊的实际位置和体温进行监测。测试结果表明:系统可以准确测量山羊的体温和位置,响应快,稳定性高,符合设计需求。