In this paper a dynamical model of a two degree of freedom,tendon based,parallel manipulator (TBPM) system is proposed. The motion control methods of the TBPM system were designed. Using MATLAB,the motion control simu...In this paper a dynamical model of a two degree of freedom,tendon based,parallel manipulator (TBPM) system is proposed. The motion control methods of the TBPM system were designed. Using MATLAB,the motion control simulation of this model TBPM system was implemented in preparation for actual experiments. The results of the simulation demonstrated that the response time of the system was in a reasonable range,the motion behavior of the platform was stable and the tension forces acting on the tendons were in a safe range and acceptable. Furthermore,the parameters of the controllers were optimized using MATLAB and better results for the time response were obtained.展开更多
A novel sorting system based on one degree of freedom (DOF) tendon based parallel manipulator (TBPM) for high value waste processing was presented and designed. In order to control the motion of loads, nonlinear state...A novel sorting system based on one degree of freedom (DOF) tendon based parallel manipulator (TBPM) for high value waste processing was presented and designed. In order to control the motion of loads, nonlinear state feed forward control algorithm in the tendon length coordinate was used. Considering the system redundancy and actuation behavior, algorithms of optimal tension distribution and forward kinematics were designed. Then, the simulation experiments of motion control were implemented. The results demonstrate that the proposed TBPM translation system performs robust capacities. It can transfer the loads 1 m away within 1.5 s. With further optimization, the translation duration can be further reduced to be about 1 s and the optimized translation is followed with 43.59 m/s2 maximum acceleration. The translation errors at the aim position remain below 0.4 mm.展开更多
基金Project HI 370/24-1 supported by the German Research Community (DFG)
文摘In this paper a dynamical model of a two degree of freedom,tendon based,parallel manipulator (TBPM) system is proposed. The motion control methods of the TBPM system were designed. Using MATLAB,the motion control simulation of this model TBPM system was implemented in preparation for actual experiments. The results of the simulation demonstrated that the response time of the system was in a reasonable range,the motion behavior of the platform was stable and the tension forces acting on the tendons were in a safe range and acceptable. Furthermore,the parameters of the controllers were optimized using MATLAB and better results for the time response were obtained.
基金Project(B07028) supported by "111" Introducing Talents of Discipline to University Program through Ministry of Education of China
文摘A novel sorting system based on one degree of freedom (DOF) tendon based parallel manipulator (TBPM) for high value waste processing was presented and designed. In order to control the motion of loads, nonlinear state feed forward control algorithm in the tendon length coordinate was used. Considering the system redundancy and actuation behavior, algorithms of optimal tension distribution and forward kinematics were designed. Then, the simulation experiments of motion control were implemented. The results demonstrate that the proposed TBPM translation system performs robust capacities. It can transfer the loads 1 m away within 1.5 s. With further optimization, the translation duration can be further reduced to be about 1 s and the optimized translation is followed with 43.59 m/s2 maximum acceleration. The translation errors at the aim position remain below 0.4 mm.