The stress–strain behavior and strain rate sensitivity of pre-strained Ni80Cr20（Ni20Cr） were studied at strain rates from 4.8×10^（–4）s^（–1） to 1.1×10^（–1）s^（–1）. Specimens were prepared throug...The stress–strain behavior and strain rate sensitivity of pre-strained Ni80Cr20（Ni20Cr） were studied at strain rates from 4.8×10^（–4）s^（–1） to 1.1×10^（–1）s^（–1）. Specimens were prepared through cold drawing with abnormal plastic deformation. The texture of the specimen was characterized using electron backscatter diffraction. Results revealed that the ultimate tensile strength and ductility of the pre-strained Ni20Cr microwires simultaneously increased with increasing strain rate. Twinning-induced negative strain rate sensitivity was discovered. Positive strain rate sensitivity was present in fracture flow stress, whereas negative strain rate sensitivity was detected in flow stress values of σ_（0.5%） and σ_（1%）. Tensile test of the pre-strained Ni20Cr showed that twinning deformation predominated, whereas dislocation slip deformation dominated when twinning deformation reached saturation. The trends observed in the fractions of 2°-5°, 5°-15°, and 15°-180° grain boundaries confirmed that twinning deformation dominated the first stage.展开更多
That whether unidirectional tension changes the influence of incident angle on FSS's(frequency selective surface) electromagnetic(EM) property and whether incident angle changes the effect of unidirectional intens...That whether unidirectional tension changes the influence of incident angle on FSS's(frequency selective surface) electromagnetic(EM) property and whether incident angle changes the effect of unidirectional intension on FSS's EM property is researched.The pattern and magnitude of these changes are revealed.Firstly,the analyses for the mechanism of unidirectional tension's influence and the mechanism of the coupling between the influences of unidirectional tension and incident angle are conducted.Then,according to the mechanism of these influences,Mechanics-Electromagnetics co-analysis is conducted based on mechanics finite element method and electromagnetics finite element method.The frequency responses of the FSS which is under different unidirectional tensions and illuminated by EM wave incident at different angles are gained.The concept"unidirectional tensile sensitivity of FSS"is put forward along with two unidirectional tensile sensitivity factors.By using angular sensitivity-factor and unidirectional tensile sensitivity-factor,the influences of unidirectional tension and incident angle,which are coupled with each other,are expatiated respectively.Research results show that these influences have two sides.Meanwhile,basing on Mode Matching Method and according to the results of numerical investigation,one principle for the layout of FSS with apertures is gained.Several suggestions for further research are given.展开更多
基金Funded by the National Natural Science Foundation of China(No.11135007)
文摘The stress–strain behavior and strain rate sensitivity of pre-strained Ni80Cr20（Ni20Cr） were studied at strain rates from 4.8×10^（–4）s^（–1） to 1.1×10^（–1）s^（–1）. Specimens were prepared through cold drawing with abnormal plastic deformation. The texture of the specimen was characterized using electron backscatter diffraction. Results revealed that the ultimate tensile strength and ductility of the pre-strained Ni20Cr microwires simultaneously increased with increasing strain rate. Twinning-induced negative strain rate sensitivity was discovered. Positive strain rate sensitivity was present in fracture flow stress, whereas negative strain rate sensitivity was detected in flow stress values of σ_（0.5%） and σ_（1%）. Tensile test of the pre-strained Ni20Cr showed that twinning deformation predominated, whereas dislocation slip deformation dominated when twinning deformation reached saturation. The trends observed in the fractions of 2°-5°, 5°-15°, and 15°-180° grain boundaries confirmed that twinning deformation dominated the first stage.
基金the Defense Science and Technology Advance-research for Ship Industry
文摘That whether unidirectional tension changes the influence of incident angle on FSS's(frequency selective surface) electromagnetic(EM) property and whether incident angle changes the effect of unidirectional intension on FSS's EM property is researched.The pattern and magnitude of these changes are revealed.Firstly,the analyses for the mechanism of unidirectional tension's influence and the mechanism of the coupling between the influences of unidirectional tension and incident angle are conducted.Then,according to the mechanism of these influences,Mechanics-Electromagnetics co-analysis is conducted based on mechanics finite element method and electromagnetics finite element method.The frequency responses of the FSS which is under different unidirectional tensions and illuminated by EM wave incident at different angles are gained.The concept"unidirectional tensile sensitivity of FSS"is put forward along with two unidirectional tensile sensitivity factors.By using angular sensitivity-factor and unidirectional tensile sensitivity-factor,the influences of unidirectional tension and incident angle,which are coupled with each other,are expatiated respectively.Research results show that these influences have two sides.Meanwhile,basing on Mode Matching Method and according to the results of numerical investigation,one principle for the layout of FSS with apertures is gained.Several suggestions for further research are given.
