Earthquakes have significant impact on rock slopes,thus studying the seismic stability of double-slider rock slopes containing tension cracks is crucial.We proposed an analysis method on the seismic dynamic slope stab...Earthquakes have significant impact on rock slopes,thus studying the seismic stability of double-slider rock slopes containing tension cracks is crucial.We proposed an analysis method on the seismic dynamic slope stability.This method utilizes discrete Fourier transform to decompose real earthquake waves into a combination of harmonic waves.These waves are then used in conjunction with the pseudo-dynamic method and safety factor calculation formula to compute the safety factor.This approach accurately captures the influence of seismic time history characteristics on the dynamic stability of double-slider rock slopes containing tension cracks.The minimum safety factor in the obtained time history curves of the safety factor reflects the most unfavorable state of the slopes under seismic effects.Quantitative analysis is conducted using six sets of actual earthquake ground motion data obtained from the Pacific Earthquake Engineering Research Center’s NGAWest2 ground-shaking record database.The conclusions are as follows:(1)There is an inverse correlation between the average seismic acceleration amplitude and the minimum safety factor.Conversely,the seismic acceleration amplitude standard deviation shows a positive correlation with the minimum safety factor.The global sensitivity of geometric parameters in the slope model is higher than other influencing factors.(2)The proposed dynamic stability analysis method can capture the dynamic characteristics of earthquakes,emphasizing the minimum safety factor of the slope in the seismic time history as a stability indicator.In contrast,the pseudo-static method may yield unsafe results.(3)A safety factor expression considering hydrostatic pressure is proposed.A negative correlation was observed between the height of the water level line and the minimum safety factor.展开更多
The tension cracks and joints in rock or soil slopes affect their failure stability.Prediction of rock or soil slope failure is one of the most challenging tasks in the earth sciences.The actual slopes consist of inho...The tension cracks and joints in rock or soil slopes affect their failure stability.Prediction of rock or soil slope failure is one of the most challenging tasks in the earth sciences.The actual slopes consist of inhomogeneous materials,complex morphology,and erratic joints.Most studies concerning the failure of rock slopes primarily focused on determining Factor of Safety(FoS)and Critical Slip Surface(CSS).In this article,the effect of inclined tension crack on a rock slope failure is studied numerically with Shear Strength Reduction Factor(SRF)method.An inclined Tension Crack(TC)influences the magnitude and location of the rock slope’s Critical Shear Strength Reduction Factor(CSRF).Certainly,inclined cracks are more prone to cause the failure of the slope than the vertical TC.Yet,all tension cracks do not lead to failure of the slope mass.The effect of the crest distance of the tension crack is also investigated.The numerical results do not show any significant change in the magnitude of CSRF unless the tip of the TC is very near to the crest of the slope.ATC is also replaced with a joint,and the results differ from the corresponding TC.These results are discussed regarding shear stress and Critical Slip Surface(CSS).展开更多
The effects of pre-deformation and strain rate on the stress corrosion cracking （SCC） behavior of aluminum alloy 2519 in air and in 3.5% NaCI water solution were investigated by means of slow strain rate tension （S...The effects of pre-deformation and strain rate on the stress corrosion cracking （SCC） behavior of aluminum alloy 2519 in air and in 3.5% NaCI water solution were investigated by means of slow strain rate tension （SSRT）, scanning electron microscopy （SEM）, and transmission electron microscopy （TEM）. The results indicate that the alloy is susceptible to SCC in 3.5% NaCI water solution and not in air. At the same pre-deformation, the alloy is more susceptible to SCC at 1.33 × 10^-5 s^-1 than at 6.66 × 10^-5 s^-1. Moreover, it is more susceptible to SCC at free pre-deformation than at 10% pre-deformation at the same strain rate. The number of 0 precipitated along the grain boundaries is reduced and distributed discontinuously, at the same time, the precipitate-free zones （PFZ） become narrow and the susceptibility to stress corrosion cracking is reduced after 10% pre-deformation.展开更多
In this paper, a compression-to-tension conversion technique is developed by applying predominant mode I loading test, using a servo-controlled compression system. The technique is applied to thin mortar plate specime...In this paper, a compression-to-tension conversion technique is developed by applying predominant mode I loading test, using a servo-controlled compression system. The technique is applied to thin mortar plate specimens of different widths that include a prefabricated crack on either a single side to facilitate unilateral crack propagation, or prefabricated cracks positioned on both sides asymmetrically with respect to the specimen midpoint to facilitate bilateral crack propagation under direct tensile stress with a loading rate of 0.001 mm/s. The results show that the main pathways of unilateral crack propagation governing specimen failure are fluctuated locally, but present an approximately straight line overall in the absence of pre-existing internal defects. However, the pathways of bilateral crack propagation are relatively complex, although they present similar characteristics. Analysis results suggest that bilateral crack propagation can be basically divided into three stages, i.e. a stage of linear propagation, a stage representing deviation from the other crack, and a stage where one crack approaches either the other crack or approaches the opposite edge of the specimen, and thereby forming a continuous crack through the specimen. In addition, the stressestrain curves of bilateral crack specimens do not vary significantly around the point of peak stress prior to specimen failure, which means that the specimens do not fail instantaneously.展开更多
Through the test of 8 RC shear wall specimens and computer analysis ofstrains of steel bars with keyways in the specimens,the authors have studied the remains oftensile stress of concrete between cracks after concrete...Through the test of 8 RC shear wall specimens and computer analysis ofstrains of steel bars with keyways in the specimens,the authors have studied the remains oftensile stress of concrete between cracks after concrete cracking and put forward a formulato calculate coefficient Ψ,the ununiform distribution factor of steel strain.This coefficientcan be used to modify the calculated steel strain in cracked zone,so as to make the resultsof using finite clement method to analyze shear walls more accurate.展开更多
The dynamic observation of the fracture processes of PET(polyethylene terephthalate)andPAN(polyacrylonitrile)fibers in tension was carried out under a scanning electron microscope.Thestepwisc micrographs taken reveale...The dynamic observation of the fracture processes of PET(polyethylene terephthalate)andPAN(polyacrylonitrile)fibers in tension was carried out under a scanning electron microscope.Thestepwisc micrographs taken revealed the features of crack initiation and crack growth and of thefailure of the fibers.The fracture behaviour of PET fibers in tension is characterized by theoccurence of shear bands,which initiate a crack whose development leads to the final failure of afiber.For tensile PAN fibers,a high concentration of cracks are initiate in the skin of a fiber,andthen a few or one of them develop themselves by way of pulse and lead to the final failure of the fi-ber.展开更多
基金financially supported by the National Natural Science Foundation of China(No.51978666)the Hunan Province Science Fund for Distinguished Young Scholars(No.2021JJ10063)+3 种基金the Scientific and Technological Progress and Innovation Project of Hunan Provincial Department of Transportation(No.202115)the Fundamental Research Funds for the Central Universities of Central South University(NO.2023ZZTS0677)the Natural Science Foundation of Hunan Province(NO.2023JJ40078)the Scientific Research Project of Hunan Provincial Education Department(No.22C0573)。
文摘Earthquakes have significant impact on rock slopes,thus studying the seismic stability of double-slider rock slopes containing tension cracks is crucial.We proposed an analysis method on the seismic dynamic slope stability.This method utilizes discrete Fourier transform to decompose real earthquake waves into a combination of harmonic waves.These waves are then used in conjunction with the pseudo-dynamic method and safety factor calculation formula to compute the safety factor.This approach accurately captures the influence of seismic time history characteristics on the dynamic stability of double-slider rock slopes containing tension cracks.The minimum safety factor in the obtained time history curves of the safety factor reflects the most unfavorable state of the slopes under seismic effects.Quantitative analysis is conducted using six sets of actual earthquake ground motion data obtained from the Pacific Earthquake Engineering Research Center’s NGAWest2 ground-shaking record database.The conclusions are as follows:(1)There is an inverse correlation between the average seismic acceleration amplitude and the minimum safety factor.Conversely,the seismic acceleration amplitude standard deviation shows a positive correlation with the minimum safety factor.The global sensitivity of geometric parameters in the slope model is higher than other influencing factors.(2)The proposed dynamic stability analysis method can capture the dynamic characteristics of earthquakes,emphasizing the minimum safety factor of the slope in the seismic time history as a stability indicator.In contrast,the pseudo-static method may yield unsafe results.(3)A safety factor expression considering hydrostatic pressure is proposed.A negative correlation was observed between the height of the water level line and the minimum safety factor.
文摘The tension cracks and joints in rock or soil slopes affect their failure stability.Prediction of rock or soil slope failure is one of the most challenging tasks in the earth sciences.The actual slopes consist of inhomogeneous materials,complex morphology,and erratic joints.Most studies concerning the failure of rock slopes primarily focused on determining Factor of Safety(FoS)and Critical Slip Surface(CSS).In this article,the effect of inclined tension crack on a rock slope failure is studied numerically with Shear Strength Reduction Factor(SRF)method.An inclined Tension Crack(TC)influences the magnitude and location of the rock slope’s Critical Shear Strength Reduction Factor(CSRF).Certainly,inclined cracks are more prone to cause the failure of the slope than the vertical TC.Yet,all tension cracks do not lead to failure of the slope mass.The effect of the crest distance of the tension crack is also investigated.The numerical results do not show any significant change in the magnitude of CSRF unless the tip of the TC is very near to the crest of the slope.ATC is also replaced with a joint,and the results differ from the corresponding TC.These results are discussed regarding shear stress and Critical Slip Surface(CSS).
基金financially supported by the State Key Fundamental Research Program of China (No. 2005CB623706)
文摘The effects of pre-deformation and strain rate on the stress corrosion cracking （SCC） behavior of aluminum alloy 2519 in air and in 3.5% NaCI water solution were investigated by means of slow strain rate tension （SSRT）, scanning electron microscopy （SEM）, and transmission electron microscopy （TEM）. The results indicate that the alloy is susceptible to SCC in 3.5% NaCI water solution and not in air. At the same pre-deformation, the alloy is more susceptible to SCC at 1.33 × 10^-5 s^-1 than at 6.66 × 10^-5 s^-1. Moreover, it is more susceptible to SCC at free pre-deformation than at 10% pre-deformation at the same strain rate. The number of 0 precipitated along the grain boundaries is reduced and distributed discontinuously, at the same time, the precipitate-free zones （PFZ） become narrow and the susceptibility to stress corrosion cracking is reduced after 10% pre-deformation.
基金support provided by the Strategic Program of Chinese Academy of Sciences (Grant No. XDB10030400)the Hundred Talent Program of Chinese Academy of Sciences (Grant No. Y323081C01)
文摘In this paper, a compression-to-tension conversion technique is developed by applying predominant mode I loading test, using a servo-controlled compression system. The technique is applied to thin mortar plate specimens of different widths that include a prefabricated crack on either a single side to facilitate unilateral crack propagation, or prefabricated cracks positioned on both sides asymmetrically with respect to the specimen midpoint to facilitate bilateral crack propagation under direct tensile stress with a loading rate of 0.001 mm/s. The results show that the main pathways of unilateral crack propagation governing specimen failure are fluctuated locally, but present an approximately straight line overall in the absence of pre-existing internal defects. However, the pathways of bilateral crack propagation are relatively complex, although they present similar characteristics. Analysis results suggest that bilateral crack propagation can be basically divided into three stages, i.e. a stage of linear propagation, a stage representing deviation from the other crack, and a stage where one crack approaches either the other crack or approaches the opposite edge of the specimen, and thereby forming a continuous crack through the specimen. In addition, the stressestrain curves of bilateral crack specimens do not vary significantly around the point of peak stress prior to specimen failure, which means that the specimens do not fail instantaneously.
文摘Through the test of 8 RC shear wall specimens and computer analysis ofstrains of steel bars with keyways in the specimens,the authors have studied the remains oftensile stress of concrete between cracks after concrete cracking and put forward a formulato calculate coefficient Ψ,the ununiform distribution factor of steel strain.This coefficientcan be used to modify the calculated steel strain in cracked zone,so as to make the resultsof using finite clement method to analyze shear walls more accurate.
文摘The dynamic observation of the fracture processes of PET(polyethylene terephthalate)andPAN(polyacrylonitrile)fibers in tension was carried out under a scanning electron microscope.Thestepwisc micrographs taken revealed the features of crack initiation and crack growth and of thefailure of the fibers.The fracture behaviour of PET fibers in tension is characterized by theoccurence of shear bands,which initiate a crack whose development leads to the final failure of afiber.For tensile PAN fibers,a high concentration of cracks are initiate in the skin of a fiber,andthen a few or one of them develop themselves by way of pulse and lead to the final failure of the fi-ber.
