Flexible pavement longitudinal joint quality evaluation using non-destructive testing

Longitudinal joint construction quality is critical to the life of flexible pavements.Maintaining deteriorated longitudinal joints has become a challenge for many highway agencies.Improving the joint's quality through better compaction during construction can help achieve flexible pavements with longer service lives and less maintenance.Current quality control(QC)and quality assurance(QA)plans provide limited coverage.Consequently,the risk of missing areas with poor joint compaction is significant.A density profiling system(DPS)is a non-destructive alternative to conventional destructive evaluation methods.It can provide quick and continuous real-time coverage of the compaction during construction in dielectrics.The paper presents several case studies comparing various types of longitudinal joints and demonstrating the use of DPS to evaluate the joint's compaction quality.The paper shows that dielectric measurements can provide valuable insight into the ability of various construction techniques to achieve adequate levels of compaction at the longitudinal joint.The paper proposes a dielectric-based longitudinal joint quality index(LJQI)to evaluate the relative compaction of the joint during construction.It also shows that adopting DPS for assessing the compaction of longitudinal joints can minimize the risk of agencies accepting poorly constructed joints,identify locations of poor quality during construction,and achieve better-performing flexible pavements.

Acoustic Non-Destructive Testing Technology in Concrete Bridge Inspection and Pile Foundation Detection

This article takes the actual construction project of a certain concrete bridge project as an example to analyze the application of acoustic non-destructive testing technology in its detection.It includes an overview of a certain bridge construction project studied and acoustic non-destructive testing technology and the application of acoustic non-destructive testing technology in actual testing.This analysis hopes to provide some guidelines for acoustic non-destructive testing of modern concrete bridge projects.

Compressive Strength of Basic Magnesium Sulfate Cement Coral Aggregate Concrete(MCAC)on Non-Destructive Testing

Basic magnesium sulfate cement coral aggregate concrete(MCAC)is a new type of concrete consisting of basic magnesium sulfate cement,coarse coral aggregate,coral reef sand and seawater.The rebound hammer(RH),the ultrasonic pulse velocity(UPV)and the compressive strength(fcu)tests of 14 sets of cube specimens of the MCAC after 28 d of aging were conducted.The impact of the content and length of sisal fiber on the relationship between the fcu-RH and the fcu-UPV was determined.A mathematical model was established to predict the strength of the MCAC using the UPV,RH,and comprehensive UPV/RH methods and to obtain the curves of test strength.The applicability of the test strength curves of ordinary portland concrete(OPC),light-weight aggregate concrete(LAC),and coral aggregate concrete(CAC)to MCAC was assessed.The results showed that the test strength curves of OPC,LAC and CAC were inappropriate to determine the strength of MCAC using non-destructive method.The relative standard error of the curves of test strength of the RH method and the comprehensive method met the specifications,whereas that of the UPV method did not.

Discussion on the Status Quo of Non-Destructive Testing Technology in Highway Engineering and Strategies of Improving the Quality of Testing

Highway test and detection technology play a very important role in controlling the quality of road and bridge engineering and improving the maintenance of roads and bridges.The study of highway bridge test detection technology is both theoretically and practically useful.Road and bridge test and detection is a complicated task.With the development of science and technology,highway and bridge engineering test and detection technology has also made great progress.The continuous improvement of test and detection technology has brought good social benefits to road and bridge construction.This article discusses the problems in test and detection technology of highway bridges and how to improve the quality of test and detection.

Application of Non-Destructive Testing Technology in Quality Testing and Control of Water Conservancy Projects

In view of social development,the demand for water conservancy engineering applications continues to increase.The number and scale of water conservancy projects in China have been in a state of continuous expansion in recent years.As a result,how to achieve efficient testing and effective control of the quality of water conservancy projects has always been a topic of discussion in the field of water conservancy engineering in our country.This paper summarizes the application of non-destructive testing technology in the quality testing and control of water conservancy projects.On the basis of explaining the connotation and application advantages of non-destructive testing technology,the non-destructive testing application strategies for concrete strength,steel corrosion and shallow cracks in water conservancy projects were studied.

Optical generation,detection and non-destructive testing applications of terahertz waves

Optoelectronic terahertz generation and detection play a key role in the applications of non-destructive testing,which involves different areas such as physics,biological,material science,imaging,explosions detection,astronomy applications,semiconductor technology and superconductiong electronics. In this article,we present a reviewof the principle and performance of typical terahertz sources,detectors and non-destructive testing applications. On this basis,the newdevelopment and trends of terahertz radiation detectors are also discussed.

Phase aberration correction in ultrasonic phased array non-destructive testing systems

Phase aberration correction for medical ultrasound systems has attracted a great deal of attention. Since phased array techniques are now widely employed for industrial non-destructive testing （NDT） applications in various fields, the problem of phase aberrations in the process of NDT testing is considered. The technique of cross-covariance for phase aberration correction is presented. The performance of the technique for phase aberration correction is tested by means of echo signals obtained in practical non-destructive testing experiment. The results show that the technique has the better accuracy of phase correction.

Pulsed Eddy Current Non-destructive Testing and Evaluation:A Review

Pulsed eddy current （PEC） non-destructive test- ing and evaluation （NDT＆E） has been around for some time and it is still attracting extensive attention from researchers around the globe, which can be witnessed through the reports reviewed in this paper. Thanks to its richness of spectral components, various applications of this technique have been proposed and reported in the lit- erature covering both structural integrity inspection and material characterization in various industrial sectors. To support its development and for better understanding of the phenomena around the transient induced eddy currents, attempts for its modelling both analytically and numeri- cally have been made by researchers around the world. This review is an attempt to capture the state-of-the-art development and applications of PEC, especially in the last 15 years and it is not intended to be exhaustive. Future challenges and opportunities for PEC NDT＆E are also presented.

A coin-tap method of composite materials non-destructive testing based on improved grey clustering

Aiming at the problems of low reliability and complex operation of traditional coin-tap test of composite material,this paper introduces the grey system theory and achieves better performance.The response signals of coin-tap are classified through the grey clustering based on relation analysis,and corresponding improvements are made to the calculation method of the relation degree of nearness.First,the time history of acceleration is taken as the system behavior sequence.The improved correlation calculation method is used to solve the relation degree of nearness between the sequences,and the matrix of degree of grey relation is constructed based on this.Then,the sequence groups are summarized through the matrix,and the response signals of coin-tap are qualitatively classified according to the location of the reference sequence.Finally,the defect detection of composite materials is completed without pre-testing.The test results show that the accuracy of the coin-tap test based on improved grey clustering reaches 100%,which simplifies the operation steps while ensuring the reliability of the coin-tap test results.

Non-Destructive Testing of Structures Using Optical and Other Methods: A Review

Non-destructive testing (NDT) of structures is one of the most important tasksof the proper maintenance and diagnosis of machines and constructions structuralcondition. NDT methods contribute to the damage tolerance philosophy used in theaircraft design methodology as well as many other operation and maintenance programsof machinery and constructions. The following study is focusing on overviewing animportant group of NDT methods: the optical and other ones, which found broadapplicability in scientific and industrial studies nowadays. The paper discusses theselected most widely applicable methods, namely, visual testing, ultrasonic testing,radiographic testing, infrared thermography as well as electronic speckle patterninterferometry and shearographic testing. Besides the basic principles of testing usingthese methods, their potential applications in various industrial and technologicalbranches are broadly discussed. The analysis as categorization of the NDT methodsprovided in this paper may help in selection of such methods in diagnosis of varioustypes of structures and defects and damage occurring in these structures.

Non-destructive experimental testing and modeling of electrical impedance behavior of untreated and treated ultra-soft clayey soils

The characterization of ultra-soft clayey soil exhibits extreme challenges due to low shear strength of such material.Hence,inspecting the non-destructive electrical impedance behavior of untreated and treated ultra-soft clayey soils gains more attention.Both shear strength and electrical impedance were measured experimentally for both untreated and treated ultra-soft clayey soils.The shear strength of untreated ultra-soft clayey soil reached 0.17 kPa for 10% bentonite content,while the shear strengths increased to 0.27 kPa and 6.7 kPa for 10% bentonite content treated with 2% lime and 10% polymer,respectively.The electrical impedance of the ultra-soft clayey soil has shown a significant decrease from 1.6 kΩ to 0.607 kΩ when the bentonite content increased from 2% to 10% at a frequency of 300 kHz.The10%lime and 10% polymer treatments have decreased the electrical impedances of ultra-soft clayey soil with 10%bentonite from 0.607 kΩ to 0.12 kΩ and 0.176 kΩ,respectively,at a frequency of 300 kHz.A new mathematical model has been accordingly proposed to model the non-destructive electrical impedancefrequency relationship for both untreated and treated ultra-soft clayey soils.The new model has shown a good agreement with experimental data with coefficient of determination（R;）up to 0.99 and root mean square error（RMSE） of 0.007 kΩ.

Application Research of the Non-Destructive Testing Using Optical Fiber Sensor

In this paper, an optical fiber sensor is designed by using optical Faraday effect. It is composed of fiber collimator, polarizer, magneto-optical crystal and mirror. Based on the magnetic flux leakage (MFL) theory, The optical fiber sensor was placed between two permanent magnets with the N-pole. Therefore, the optical fiber sensing system was built to detect the defective ferromagnetic objects. Theoretical and experimental studies shown that the system can identify a little defects, such as irons’ blind hole (diameter φ =?3mm , depth t = 4mm?), irons’ grooves (length l= 30mm , width?ω = 10mm ), hole (φ?=?3mm ) and crackle etc. The system has the characteristics of small size, high sensitivity, fast signal response and high resolution. In terms of the defective oil and gas pipelines detection, The optical fiber sensing system is used in non-destructive testing, which will be valuable and meaningful.

Application of Non-destructive Testing to Evaluate the Performance of Bridges Structures

Bridges are important elements in road system and can influence the entire economy of cities and region. Usually, these structures have high financial investments for their constructions, in this way, maintenance and conservation become so important. Inspection is a technical activity that covers several operations, including performance analysis; examination; final performance report, other operations may be necessary, such as maintenance work, recovery, strengthening and rehabilitation. Technical examination together with some test methods allows a critical and parametric judgment of the bridge performance by minimizing the subjectivity of visual evaluations, and permits a more detailed diagnosis. This paper discusses the methodology to perform tests to complement the assessment recommended by DNIT （Brazilian National Department of Transport Infrastructure）, which consists only on a visual judgment. This approach provides technical basis to classify the bridges as its need and urgency of maintenance.

Non-Destructive Testing of Rods Using a Potential Component of a Magnetic Field

An essentially new method for non-destructive testing of elastic electrically conductive rods using non-vortex electromagnetic induction is proved theoretically. An experimental technique for defining a location of a cross crack is offered.

Analysis of Non-destructive Testing and Disease Diagnosis Technology of Tunnel Projects

Engineering incidents caused by the quality of tunnel construction and geological diseases occur from time to time,which not only causes many problems in engineering geophysical prospecting,but also provided a broad space for the application and development of engineering geophysical prospecting technology.Non-destructive testing technology has made great progress.Combining the diagnosis and treatment of tunnel diseases,the ground penetrating radar non-destructive detection technology is discussed.

An Electrical Impedance Imaging System Towards Edge Intelligence for Non-Destructive Testing of Concrete

In the construction industry,to prevent accidents,non-destructive tests are necessary and cost-effective.Electrical impedance tomography is a new technology in non-invasive imaging in which the image of the inner part of conductive bodies is reconstructed by the arrays of external electrodes that are connected on the periphery of the object.The equipment is cheap,fast,and edge compatible.In this imaging method,the image of electrical conductivity distribution(or its opposite;electrical impedance)of the internal parts of the target object is reconstructed.The image reconstruction process is performed by injecting a precise electric current to the peripheral boundaries of the object,measuring the peripheral voltages induced from it and processing the collected data.In an electrical impedance tomography system,the voltages measured in the peripheral boundaries have a non-linear equation with the electrical conductivity distribution.This paper presents a cheap Electrical Impedance Tomography(EIT)instrument for detecting impurities in the concrete.A voltage-controlled current source,a micro-controller,a set of multiplexers,a set of electrodes,and a personal computer constitute the structure of the system.The conducted tests on concrete with impurities show that the designed EIT system can reveal impurities with a good accuracy in a reasonable time.

Advances in magnetic flux leakage testing technology

Magnetic flux leakage(MFL)testing technology has the advantages of simple principle,easy engineering implementation and low requirements on the surface of the detected workpiece.Therefore,it has been one of the research hotspots in the field of non-destructive testing(NDT)and widely used for testing long distance pipelines.This paper presents the development of MFL tesing technology from the aspects of basic theory,influencing factors,magnetization technology,signal processing,etc.The problems to be solved and the future development are summarized,which can provide reference for the research and system development of MFL testing technology.

Laser ultrasonic testing for near-surface defects inspection of 316L stainless steel fabricated by laser powder bed fusion

The laser powder bed fusion(L-PBF)method of additive manufacturing(AM)is increasingly used in various industrial manufacturing fields due to its high material utilization and design freedom of parts.However,the parts produced by L-PBF usually contain such defects as crack and porosity because of the technological characteristics of L-PBF,which affect the quality of the product.Laser ultrasonic testing(LUT)is a potential technology for on-line testing of the L-PBF process.It is a non-contact and non-destructive approach based on signals from abundant waveforms with a wide frequency-band.In this study,a method of LUT for on-line inspection of L-PBF process was proposed,and a system of LUT was established approaching the actual environment of on-line detection to evaluate the method applicability for defects detection of L-PBF parts.The detection results of near-surface defects in L-PBF 316L stainless steel parts show that the crack-type defects with a sub-millimeter level within 0.5 mm depth can be identified,and accordingly,the positions and dimensions information can be acquired.The results were verified by X-ray computed tomography,which indicates that the present method exhibits great potential for on-line inspection of AM processes.

Feasibility Study for Applying Spectral Imaging for Wheat Grain Authenticity Testing in Pasta

Authentication of pasta is currently determined using molecular biology-based techniques focusing on DNA as the target analyte. Whilst proven to be effective, these approaches can be criticised as being destructive, time consuming, and requiring specialist instrument training. Advances in the field of multispectral imaging (MSI) and hyperspectral imaging (HSI) have facilitated the development of compact imaging platforms with the capability to rapidly differentiate a range of materials (inclusive of grains and seeds) based on surface colour, texture and chemical composition. This preliminary investigation evaluated the applicability of spectral imaging for identification and quantitation of durum wheat grain samples in relation to pasta authenticity. MSI and HSI were capable of rapidly distinguishing between durum wheat and adulterant common wheat cultivars and assigning percentage adulteration levels characterised by low biases and good repeatability estimates. The results demonstrated the potential for spectral imaging based seed/grain adulteration testing to augment existing standard molecular approaches for food authenticity testing.

NON-DESTRUCTIVE PAVEMENT LAYER THICKNESS MEASUREMENT USING EMPIRICAL MODE DECOMPOSITION WITH GPR

Ground Penetrating Radar(GPR) is an effective Non-Destructive Testing(NDT) technique for highway pavement surveys, which is able to acquire continuous pavement data compared with traditional core drilling method. In this study, we proposed an accurate and efficient method to estimate the thickness of each pavement layer using an air-coupled GPR system. For this work, the main difficulties are estimating each pavement layer's time delay and dielectric constant. We first give the basic signal model for pavement evaluation, and then present an Intrinsic Mode Functions(IMFs) product detector to determine each pavement layer's time delay. This method is based on Empirical Mode Decomposition(EMD), which is an adaptive signal decomposition procedure and proved to be suitable for suppressing noises in GPR signal. The dielectric constant was determined by metal reflection measurement. The laboratory and highway experiments illustrate that the proposed thickness estimation method yields reasonable result, thus meets the requirements of practical highway pavement survey with massive GPR data.