Since traditional solar simulators are mainly applied to spacecraft and photovoltaic industry,they are not suitable for solar radiation measuring instrument test. Therefore,a deep research is carried out on solar simu...Since traditional solar simulators are mainly applied to spacecraft and photovoltaic industry,they are not suitable for solar radiation measuring instrument test. Therefore,a deep research is carried out on solar simulators to test of solar radiation measuring instrument,so that obtain the requirements of performance test of solar radiation measuring instrument. With a combination of the requirements for national regulations of metrological verification and performance test of pyranometer and pyrheliometer,it lays emphasis on the research of design methods for improving radiation uniformity and stability of solar simulators; it also focuses on design methods of multidimensional detection workbench,which achieves different detection of solar radiation. After practical test,solar irradiation is within Φ60 mm; irradiation non-uniformity is better than ±0.8%; instability is better than ±0.72%;rotating angle precision is better than 0.09°. Then,solar simulator is used to carry out pyranometer sensitivity test,pyranometer directional response test,pyranometer tilt response test and non-linearity test for radiation instruments. Test results showthat the solar simulator meets the testing requirements of solar radiation measuring instruments.展开更多
This paper adopts American National Instruments (NI) Company’s LabVIEW and LabVIEW RT virtual instrument softwareplatform and lots of things for this engine performance LabVIEW virtual instrument test system, such as...This paper adopts American National Instruments (NI) Company’s LabVIEW and LabVIEW RT virtual instrument softwareplatform and lots of things for this engine performance LabVIEW virtual instrument test system, such as the matched NI PCI dataCollection Card, NI SCXI signal-adjusting instrument and NI compact FieldPoint (cFP) distributed I/O real time system hardware.This system has realized multi performances’parallel test; and it can complete load, torsional moment, rotate speed, power, pressureand temperature’s real time monitoring automatically according to user’s setting; and finally through TCP/IP protocol it realizes testdata’s teleshare and telecontrol that user put on the test system. This system has such character as short development period, highuse efficiency and low cost, at the same time it has strong extensibility and reusability, so it has very high applied cost.展开更多
Virtual instrument is playing the important role in automatic test system. This paper introduces a composition of a virtual instrument automatic test system and takes the VXIbus based a test software platform which is...Virtual instrument is playing the important role in automatic test system. This paper introduces a composition of a virtual instrument automatic test system and takes the VXIbus based a test software platform which is developed by CAT lab of the UESTC as an example. Then a method to model this system based on Petri net is proposed. Through this method, we can analyze the test task scheduling to prevent the deadlock or resources conflict. At last, this paper analyzes the feasibility of this method.展开更多
On account of the multiformity of MEMS devices, it is necessary to integrate with some optical measurement techniques for meeting static and dynamic unit test requirements. In this paper, an automated MEMS test system...On account of the multiformity of MEMS devices, it is necessary to integrate with some optical measurement techniques for meeting static and dynamic unit test requirements. In this paper, an automated MEMS test system is built of some commercially available components and instruments based on virtual instrument technology. The system is integrated with stroboscopic imaging, computer micro-vision, microscopic Mirau phase shifting interferometry, and laser Doppler vibrometer, and is used for the measurement of full-view in-plane and out-of-plane geometric parameters and periodical motions and single spot out-of-plane transient motion. The system configuration and measurement methods are analyzed, and some applications of the measurement of in-plane and out-of-plane dimensions and motions were described. The measurement accuracy of in-plane dimensions and out-of-plane dimensional is better than 0.2 μm and 5 nm respectively. The resolution of measuring in-plane and out-of-plane motions is better than 15 nm and 2 nm respectively.展开更多
Readout integrated circuit(ROIC) is one of the most important components for hybrid-integrated infrared focal plane array(IRFPA). And it should be tested to ensure the product yield before bonding. This paper presents...Readout integrated circuit(ROIC) is one of the most important components for hybrid-integrated infrared focal plane array(IRFPA). And it should be tested to ensure the product yield before bonding. This paper presents an on-wafer testing system based on Labview for ROIC of IRFPA. The quantitative measurement can be conducted after determining whether there is row crosstalk or not in this system. This low-cost system has the benefits of easy expansion, upgrading, and flexibility, and it has been employed in the testing of several kinds of IRFPA ROICs to measure the parameters of saturated output voltage, non-uniformity, dark noise and dynamic range, etc.展开更多
文摘Since traditional solar simulators are mainly applied to spacecraft and photovoltaic industry,they are not suitable for solar radiation measuring instrument test. Therefore,a deep research is carried out on solar simulators to test of solar radiation measuring instrument,so that obtain the requirements of performance test of solar radiation measuring instrument. With a combination of the requirements for national regulations of metrological verification and performance test of pyranometer and pyrheliometer,it lays emphasis on the research of design methods for improving radiation uniformity and stability of solar simulators; it also focuses on design methods of multidimensional detection workbench,which achieves different detection of solar radiation. After practical test,solar irradiation is within Φ60 mm; irradiation non-uniformity is better than ±0.8%; instability is better than ±0.72%;rotating angle precision is better than 0.09°. Then,solar simulator is used to carry out pyranometer sensitivity test,pyranometer directional response test,pyranometer tilt response test and non-linearity test for radiation instruments. Test results showthat the solar simulator meets the testing requirements of solar radiation measuring instruments.
文摘This paper adopts American National Instruments (NI) Company’s LabVIEW and LabVIEW RT virtual instrument softwareplatform and lots of things for this engine performance LabVIEW virtual instrument test system, such as the matched NI PCI dataCollection Card, NI SCXI signal-adjusting instrument and NI compact FieldPoint (cFP) distributed I/O real time system hardware.This system has realized multi performances’parallel test; and it can complete load, torsional moment, rotate speed, power, pressureand temperature’s real time monitoring automatically according to user’s setting; and finally through TCP/IP protocol it realizes testdata’s teleshare and telecontrol that user put on the test system. This system has such character as short development period, highuse efficiency and low cost, at the same time it has strong extensibility and reusability, so it has very high applied cost.
基金Supported by the Ministry of Education for Ph. D (20030614006)
文摘Virtual instrument is playing the important role in automatic test system. This paper introduces a composition of a virtual instrument automatic test system and takes the VXIbus based a test software platform which is developed by CAT lab of the UESTC as an example. Then a method to model this system based on Petri net is proposed. Through this method, we can analyze the test task scheduling to prevent the deadlock or resources conflict. At last, this paper analyzes the feasibility of this method.
基金Supported by National Natural Science Foundation of China (No.50505031)Tianjin Municipal Science and Technology Commission(No.043185911)Programfor NewCentury Excellent Talents in University
文摘On account of the multiformity of MEMS devices, it is necessary to integrate with some optical measurement techniques for meeting static and dynamic unit test requirements. In this paper, an automated MEMS test system is built of some commercially available components and instruments based on virtual instrument technology. The system is integrated with stroboscopic imaging, computer micro-vision, microscopic Mirau phase shifting interferometry, and laser Doppler vibrometer, and is used for the measurement of full-view in-plane and out-of-plane geometric parameters and periodical motions and single spot out-of-plane transient motion. The system configuration and measurement methods are analyzed, and some applications of the measurement of in-plane and out-of-plane dimensions and motions were described. The measurement accuracy of in-plane dimensions and out-of-plane dimensional is better than 0.2 μm and 5 nm respectively. The resolution of measuring in-plane and out-of-plane motions is better than 15 nm and 2 nm respectively.
文摘Readout integrated circuit(ROIC) is one of the most important components for hybrid-integrated infrared focal plane array(IRFPA). And it should be tested to ensure the product yield before bonding. This paper presents an on-wafer testing system based on Labview for ROIC of IRFPA. The quantitative measurement can be conducted after determining whether there is row crosstalk or not in this system. This low-cost system has the benefits of easy expansion, upgrading, and flexibility, and it has been employed in the testing of several kinds of IRFPA ROICs to measure the parameters of saturated output voltage, non-uniformity, dark noise and dynamic range, etc.
