Application of Filming Technique in the DUS Test for PVP Information

As the great progress has appeared in the field of protection of new varieties of plants, the standardization of the DUS （Distinctness, Uniformity, Stability） test procedure has become more important. However, the specification of filming technique plays an important role in the DUS test of new varieties of plants. In this paper, we analyzed the status quo and significance of the application of filming technique in the PVP （Plant Variety Protection） system, and provided an introduction about the application of filming technique in DUS test in China.

Field Load Test Based SHM System Safety Standard Determination for Rigid Frame Bridge

The deteriorated continuous rigid frame bridge is strengthened by external prestressing. Static loading tests wereconducted before and after the bridge rehabilitation to verify the effectiveness of the rehabilitation process. Thestiffness of the repaired bridge is improved, and the maximum deflection of the load test is reduced from 37.9 to27.6 mm. A bridge health monitoring system is installed after the bridge is reinforced. To achieve an easy assessmentof the bridge’s safety status by directly using transferred data, a real-time safety warning system is createdbased on a five-level safety standard. The threshold for each safety level will be determined by theoretical calculationsand the outcomes of static loading tests. The highest risk threshold will be set at the ultimate limit statevalue. The remaining levels, namely middle risk, low risk, and very low risk, will be determined usingreduction coefficients of 0.95, 0.9, and 0.8, respectively.

Evaluation of Digits-in-Noise Test and Hearing Handicap Inventory for Adults Screening in Patients with Occupational Noise-Induced Hearing Loss

Objective:To explore the clinical evaluation role of the Digits-in-Noise(DIN)test and Hearing Handicap Inventory for Adults Screening(HHIA-S)for patients with occupational noise-induced hearing loss and to observe and analyze their application values.Methods:Fifty patients with suspected occupational noise-induced hearing loss were randomly selected from the Department of Otolaryngology at the hospital as the research target.The collection period for the research cases spanned from January 2022 to November 2023,and all patients had a history of noise exposure.The DIN test and HHIA-S were used for hearing examinations,with clinical,comprehensive diagnosis serving as the gold standard to study their diagnostic performance.Results:The compliance rate of the DIN test was 88.00%,the HHIA-S’s compliance rate was 80.00%,and the combined compliance rate was 94.00%.The compliance rate of the DIN test and the combined compliance rates of the patients were statistically significant compared to the clinical gold standard data(P<0.05),while there was no difference between the compliance rate of the HHIA-S and the gold standard(P>0.05).The data shows that the sensitivity of the combined diagnosis is significantly higher than the sensitivity data of the DIN test and HHIA-S examination alone(P<0.05).Its specificity is 100.00%,and the accuracy data of the joint diagnosis in the degree were higher than those of the DIN test alone(P>0.05)and the HHIA-S alone(P<0.05).Conclusion:For patients with occupational noise-induced hearing loss,the joint evaluation of the DIN test and HHIA-S can significantly improve their diagnostic value with high sensitivity and accuracy.

DETERMINATION OF CREEP PROPERTIES OF THERMAL BARRIER COATING(TBC)SYSTEMS FROM THE INDENTATION CREEP TESTING WITH ROUND FLAT INDENTERS

Indentation creep behavior with cylindrical flat indenters on the thermal barrier coating (TBC) was studied by finite element method (FEM). On ike constant applied indentation creep stress, there is a steady creep rate for each case studied for different creep properties of the TBC system. The steady creep depth rate depends on the applied indentation creep stress and size of the indenters as well as the creep properties of the bond coat of the TBC and the substrate. The possibilities to determine the creep properties of a thermal barrier system from indention creep testing were discussed. As an example, with two different size indenters, the creep properties of bond coat of the TBC system can be derived by an inverse FEM method. This study not only provides a numerical method to obtain the creep properties of the TBC system, but also extends the application of indentation creep method with cylindrical flat indenters.

Voltammetric Study of the Interaction between Melamine and DNA on a Carboxylic Acid-Functionalized Nano-Fe₃O₄Modified Electrode and Its Analytical Application for Melamine Determination in Liquid Milk Samples

Carboxylic acid-functionalized nano-sized magnetic composite polymers (COOH-NMPs) were synthesized and used for the preparation of the modified glassy carbon electrode, i.e., COOH-NMPs/GCE and DNA/COOH-NMPs/GCE. The electrochemical behaviors of melamine (MM) were investigated on COOH-NMPs/GCE by cyclic voltammetry (CV) in both cases of DNA in the solution and immobilized on the electrode surface. The electron transfer coefficient (a) and the rate constant (ks) kept unchanged in the absence and presence of DNA. Based on the electrochemical properties of the interaction of MM on the surface of the DNA/COOH-NMPs/GCE, a direct method for the determination of MM in liquid milk was established. The detection limit of this method was 2.0 ng·L﹣1, with average recoveries at 95.9% - 104.2% and RSD at 4.5% - 8.2%. The proposed method was provided to have a good accuracy, high stability and good reproducibility with a simple and environmental friendly process. 10 kinds of liquid milk samples bought from the market randomly were tested, and only 1 of them was found at relatively low level of MM residue with the amount of 0.12 ug·L﹣1.

Study on the Application of Gibberellin for the Spectrophotometric Determination of Arsenic,Phosphorus,Silicon and Germanium

In the media of 0.66,0.96, 2. 16 and 0.54 mol/L ofH2SO4,the heteropoly acids of As,P.Si and Ge are separately reduced to corresponding heteropoly blues by gibberellin, which exhibit maxirnum absorptions at 835, 820, 810 and 805 nm with molar absorptivities of 2.64x104, 2.54x104 3.51x104 and 2.25x104 L.mol-1'cm-1 and linear ranges of 0-30,0-15,0-10 and 0-30 μg/25mL, The method was applied to the determinations of As, P and Si in alloyed steel.

Applicability of Microbial Limit Test Method for Qingyan Zhisou Powder

[Objectives]This study was conducted to establish a microbial limit test method for Qingyan Zhisou Powder.[Methods]Applicability tests were carried out according to Microbial Limit Tests of Non-sterile Products,General Rules 1105-1107 of Part IV of Chinese Pharmacopoeia,2020.[Results]Qingyan Zhisou Powder had a strong bacteriostatic effect on Pseudomonas aeruginosa.After increasing the dilution ratio(1:40),the bacteriostatic effect was obviously eliminated.When the total number of aerobic microbes was determined by the test liquid dilution method(1:40),the recovery values were in the range of 50%-200%;and when using the test liquid(1:10)to determine the total number of mold and yeasts,the recovery ranged from 50%to 200%.Escherichia coli,Salmonella and bile-tolerant Gram-negative bacteria were detected by both the routine method and dilution method in experimental groups.[Conclusions]The microbial limit test of Qingyan Zhisou Powder adopted the test liquid dilution method,and the routine method could be used for the test of Escherichia coli,Salmonella and bile-tolerant Gram-negative bacteria.The applicability test of the method is feasible,with scientific and accurate results,and the method can effectively control the quality of the preparation and is recommended for popularization.

APPLICATION OF THERMAL ANALYSIS TO THE QUICK DETERMINATION OF THE PROXIMATE ANALYSIS ITEMS AND CALORIC VALUE FOR COAL

A research on the application of a TG-DTA(thermal gravimetry aifferential thermal analysis)to the quick determination of moisture,organic volatile fixed carbon,ash and caloric value for coal is described.

Test system of the front-end readout for an application-specific integrated circuit for the water Cherenkov detector array at the large high-altitude air shower observatory

The water Cherenkov detector array(WCDA) is an important part of the large high-altitude air shower observatory(LHAASO),which is in a research and development phase.The central scientific goal of LHAASO is to explore the origin of high-energy cosmic rays of the universe and to push forward the frontier of new physics.To simplify the WCDA's readout electronics,a prototype of a front-end readout for an application-specific integrated circuit(ASIC) is designed based on the timeover-threshold method to achieve charge-to-time conversion.High-precision time measurement and charge measurement are necessary over a full dynamic range[1-4000photoelectrons(P.E.)].To evaluate the performance of this ASIC,a test system is designed that includes the front-end ASIC test module,digitization module,and test software.The first module needs to be customized for different ASIC versions,whereas the digitization module and test software are tested for general-purpose use.In the digitization module,a field programmable gate array-based time-todigital converter is designed with a bin size of 333 ps,which also integrates an inter-integrated circuit to configure the ASIC test module,and a universal serial bus interface is designed to transfer data to the remote computer.Test results indicate that the time resolution is better than 0.5 ns,and the charge resolution is better than 30%root mean square(RMS) at 1 P.E.and 3%RMS at 4000 P.E.,which are beyond the application requirements.

Electrochemical Determination of Rate Constants for Reactions of OH and its Application in the Evaluation of Anti-Oxidant Actions of Rheum

A single-sweep oscillopolarographic procedure is descrital which allows detethenahon of rateconstants for reachons of oH. For a wide range of compounds, the results fit well with rate constantspreviously obtained with other methods. Rate constants for reactions of six kinds of active compoundscontalned in rheum, a tradihonal Chinese herb, have been deteboned by this method. Rcationmechanism ha5 also been discussed.

Interaction between Cationic Surfactants and Bromopyrogallol Red as well as Its Application for the Sensitive and Selective Determination of Mo in Mo/W Binary Mixtures

Prior to formation of the micelles of cationic surfactant (CSF), bromopyrogallol red (BPR) could exist in the forms of both monomer and oligomer After that, however, only BPR monomer existed. Nonionic surfactant OP-10 favoured the oligomerization of BPR monomer. The mixed micellar media prepared by mixing CSF and OP-10 in an appropriate ratio could be used for the sensitive and selective determination of Mo in Mo/W binary mixtures.

Method for test case selection and execution of web application regression testing

In order to improve the efficiency of regression testing in web application,the control flow graph and the greedy algorithm are adopted.This paper considers a web page as a basic unit and introduces a test case selection method for web application regression testing based on the control flow graph.This method is safe enough to the test case selection.On the base of features of request sequence in web application,the minimization technique and the priority of test cases are taken into consideration in the process of execution of test cases in regression testing for web application.The improved greedy algorithm is also raised resulting in optimization of execution of test cases.The experiments indicate that the number of test cases which need to be retested is reduced,and the efficiency of execution of test cases is also improved.

Development of DUS Test Guidelines for new varieties of Viburnum L.

Distinctness,uniformity and stability(DUS)Test Guidelines for new varieties of Viburnum L.were developed according to the principles and requirements of the International Union for the Protection of New Varieties of Plants(UPOV)and China.The development processes,including selection and determination of testing characteristics,determination of expression states of characteristics,selection of example varieties,determination of the order of characteristics,and assessment of distinctness,uniformity and stability,are described in this paper.There were 54 testing characteristics:24 qualitative characteristics(QL),15 quantitative characteristics(QN),15 pseudoqualitative characteristics(PQ)and 34 example varieties in the DUS Test Guidelines.Among the 54 testing characteristics,20 were asterisked and 34 were non-asterisked.Seven were selected for variety groupings and 18 were adopted in the Technical Questionnaire.The development of these DUS Test Guidelines will be useful for the application and protection of new Viburnum varieties.The Guidelines will provide technical support for DUS testing of Viburnum and serve as a reference for the development of new varieties in other countries.

Research on Test Methods for AI Industrial Application Capabilities of Smart Mobile Terminals

A test method and system for AI industrial application capabilities of smart terminals. The method includes the following steps: According to the temperature change values of different AI industrial applications executed by standard smart terminal equipment under different equipment parameters, the equipment parameters and temperature changes of standard smart terminal equipment are constructed. Correlation model;obtain the device parameters of the smart terminal device to be tested, and obtain the predicted value of the temperature change of the smart terminal device to be tested based on the correlation model between the device parameters of the standard smart terminal device and the temperature change;Measure the actual value of the temperature change of the intelligent terminal device executing different AI industrial applications;obtain the test result of the intelligent terminal device to be tested according to the predicted value of the temperature change and the actual value of the temperature change.

Evaluation of a handheld creatinine measurement device for real-time determination of serum creatinine in radiology departments

AIM: To assess the feasibility/accuracy of a commercial handheld device in the context of increased demand for point-of-care serum creatinine (SCr) determination. METHODS: In this institutional review board-approved, prospective study, 401 patients referred for contrastenhanced computed tomography were included at two centres. Capillary (c)SCr was determined using two devices A+B and venous (v)SCr was determined in the centre's laboratory. Method comparison statistics for both centres and for vSCr<>1.2 mg/dL, receiver operating characteristic analysis, negative predictive values (NPV), sensitivity and specificity were calculated pre-/ post-curve offset correction with vSCr. RESULTS: Pearson's coefficients for cSCr vs vSCr were: centre 1-A:0.93/B:0.92; centre 2-A:0.85/B:0.82 (all P < 0.0001). Overall correlation was better for vSCr > 1.2 mg/dL. The area under the receiver operating characteristic curves showed a high accuracy for cSCr, but the device underestimated SCr, which was confirmed by Bland-Altman plot. Addition of the offset correction factor to the original data from centre 1 resulted in an improvement in sensitivity for detecting patients at risk (> 1.2 mg/dL), whilst maintaining acceptable specificity and improving NPV. CONCLUSION: This study showed the feasibility of SCr determination using the evaluated handheld device in a routine clinical setting. The device showed high sensitivity and high NPV, but may significantly underestimate SCr without offset correction to local laboratories.

Support for development and test of web application:A tree-oriented model

Building an abstract model of the web application is the chief task of software test based on model, which is an efficient way for testing the web application. One problem with current web application test technologies is the lack of tools for modeling the whole web software, especially the lack of support for describing web application from the view of action and function. This paper is concerned with providing the support for development and test of the web application. The presented novel model, named component-based and tree-oriented web application development model （CBTOWADM）, abstracts the web application as a tree based on its system function and business process. CBTOWADM not only simplifies the design and development of the web application, but also acts as the model middleware for software test. The basic model definition, the system framework and the application in software test of CBTOWADM is described.

Determination of Binding Parameters of Miramistin to Serum Albumin by the Bioluminescent Method

Bioassay based on the luminescent bacteria was used as a new method for the determination of the kinetic constants of ligand binding to the complexion agent. Miramistin as the cationic surface-active antiseptic and serum blood albumin was taken as a model of interacting agent’s. It was concluded that this approach might have a wide range for applications, namely, in all cases where the ligand is an inhibitor of bacterial luminescence and its complex dose not effect the intensity of this process.

Testing and Analysis of VoIPv6 (Voice over Internet Protocol V6) Performance Using FreeBSD

This study focuses on testing and quality measurement and analysis of VoIPv6 performance. A client, server codes were developed using FreeBSD. This is a step before analyzing the Architectures of VoIPv6 in the current internet in order for it to cope with IPv6 traffic transmission requirements in general and specifically voice traffic, which is being attracting the efforts of research, bodes currently. These tests were conducted in the application level without looking into the network level of the network. VoIPv6 performance tests were conducted in the current tunneled and native IPv6 aiming for better end-to-end VoIPv6 performance. The results obtained in this study were shown in deferent codec's for different bit rates in Kilo bits per second, which act as an indicator for the better performance of G.711 compared with the rest of the tested codes.

An Agent-Based Framework for Automated Testing of Web-Based Systems

Parallel to the considerable growth in applications of web-based systems, there are increasing demands for methods and tools to assure their quality. Testing these systems, due to their inherent complexities and special characteristics, is complex, time-consuming and challenging. In this paper a novel multi-agent framework for automated testing of web-based systems is presented. The main design goals have been to develop an effective and flexible framework that supports different types of tests and utilize different sources of information about the system under test to automate the test process. A prototype of the proposed framework has been implemented and is used to perform some experiments. The results are promising and prove the overall design of the framework.

Establishment of Microbial Limit Test Methods for Two Hospital Preparations

[Objectives] This study was conducted to establish microbial limit test methods for traditional Chinese medicine preparations Yunpi Granules and Bupi Qiangli Paste. [Methods] According to General Rules of Part IV of Chinese Pharmacopoeia, applicability tests were conducted on microbial limit test methods for the above two traditional Chinese medicine preparations by the plate method. [Results] The established methods showed recovery values in the range of 0.5-2.0 for both experimental strains, and the control bacteria could be detected in the experimental group, but not in the negative control group. [Conclusions] The microbial limit test methods were reliable for the two traditional Chinese medicine preparations and could be used for quality control.