Modulated high frequency (HF) heating of the ionosphere provides a feasible means of artificially generating ex- tremely low frequency (ELF)/very low frequency (VLF) whistler waves, which can leak into the inner...Modulated high frequency (HF) heating of the ionosphere provides a feasible means of artificially generating ex- tremely low frequency (ELF)/very low frequency (VLF) whistler waves, which can leak into the inner magnetosphere and contribute to resonant interactions with high energy electrons. Combining the ray tracing method and test particle simulations, we evaluate the effects of energetic electron resonant scattering driven by the discrete, multi-frequency arti- ficially generated ELF/VLF waves. The simulation results indicate a stochastic behavior of electrons and a linear profile of pitch angle and kinetic energy variations averaged over all test electrons. These features are similar to those associated with single-frequency waves. The computed local diffusion coefficients show that, although the momentum diffusion of relativistic electrons due to artificial ELF/VLF whistlers with a nominal amplitude of ~ 1 pT is minor, the pitch angle scattering can be notably efficient at low pitch angles near the loss cone, which supports the feasibility of artificial triggering of multi-frequency ELF/VLF whistler waves for the removal of high energy electrons from the magnetosphere. We also investigate the dependences of diffusion coefficients on the frequency interval (△f) of the discrete, multi-frequency waves. We find that there is a threshold value of Af for which the net diffusion coefficient of multi-frequency whistlers is inversely proportional to △f (proportional to the frequency components Nw) when △f is below the threshold value but it remains unchanged with increasing Af when △f is larger than the threshold value. This is explained as being due to the fact that the resonant scattering effect of broadband waves is the sum of the effects of each frequency in the 'effective frequency band'. Our results suggest that the modulation frequency of HF heating of the ionosphere can be appropriately selected with reasonable frequency intervals so that better performance of controlled precipitation of high energy electrons in the plasmasphere by artificial ELF/VLF whistler waves can be achieved.展开更多
Using the test particle simulation method, we investigate the stochastic motion of electrons with energy of 300 keV in a monochromatic magnetosonic(MS) wave field. This study is motivated by the violation of the quasi...Using the test particle simulation method, we investigate the stochastic motion of electrons with energy of 300 keV in a monochromatic magnetosonic(MS) wave field. This study is motivated by the violation of the quasi-linear theory assumption, when strong MS waves(amplitude up to ~1 nT) are present in the Earth's magnetosphere. First, electron motion can become stochastic when the wave amplitude exceeds a certain threshold. If an electron initially resonates with the MS wave via bounce resonance, as the bounce resonance order increases, the amplitude threshold of electron stochastic motion increases until it reaches the peak at about the 11 th order in our study, then the amplitude threshold slowly declines. Further, we find that the coexistence of bounce and Landau resonances between electrons and MS waves will significantly reduce the amplitude threshold. In some cases, the electron motion can become stochastic in the field of an MS wave with amplitudes below 1 nT. Regardless, if neither the bounce nor Landau resonance condition is satisfied initially, then the amplitude threshold of stochastic motion shows an increasing trend for lower frequencies and a decreasing trend for higher frequencies, even though the amplitude threshold is always very large(> 5 nT). Our study suggests that electron stochastic motion should also be considered when modeling electron dynamics regulated by intense MS waves in the Earth's magnetosphere.展开更多
We show that the velocity and position dispersions of a test particle with a nonzero constant classical velocity undergoing Brownian motion caused by electromagnetic vacuum fluctuations in a space with plane boundarie...We show that the velocity and position dispersions of a test particle with a nonzero constant classical velocity undergoing Brownian motion caused by electromagnetic vacuum fluctuations in a space with plane boundaries can be obgained from those of the static case by Lorentz transformation. We explicitly derive the Lorentz transformations relating the dispersions of the two cases and then apply them to the case of the Brownian motion of a test particle with a constant classical velocity parallel to the boundary between two conducting planes. Our results show that the influence of a nonzero initial velocity is negligible for nonrelativistic test particles.展开更多
Neglecting the self-force, self-energy and radiative effects, we follow the spirit of Wald's gedanken experiment and further discuss whether an extremal Kerr-Newman-AdS (KNA) black hole can turn into a naked singul...Neglecting the self-force, self-energy and radiative effects, we follow the spirit of Wald's gedanken experiment and further discuss whether an extremal Kerr-Newman-AdS (KNA) black hole can turn into a naked singularity when it captures charged and spinning massive particles. It is found that feeding a test particle into an extremal KNA black hole could lead to a violation of cosmic censorship for the black hole.展开更多
The double blade pump is widely used in sewage treatment industry,however,the research on the internal flow characteristics of the double blade pump with particle image velocimetry(PIV) technology is very little at ...The double blade pump is widely used in sewage treatment industry,however,the research on the internal flow characteristics of the double blade pump with particle image velocimetry(PIV) technology is very little at present.To reveal inner flow characteristics in double blade pump impeller under off-design and design conditions,inner flows in a double blade pump impeller,whose specific speed is 111,are measured under the five off-design conditions and design condition by using 3D PIV test technology.In order to ensure the accuracy of the 3D PIV test,the external trigger synchronization system which makes use of fiber optic and equivalent calibration method are applied.The 3D PIV relative velocity synthesis procedure is compiled by using Visual C++ 2005.Then absolute velocity distribution and relative velocity distribution in the double blade pump impeller are obtained.Test results show that vortex exists in each condition,but the location,size and velocity of vortex core are different.Average absolute velocity value of impeller outlet increases at first,then decreases,and then increases again with increase of flow rate.Again average relative velocity values under 0.4,0.8,and 1.2 design condition are higher than that under 1.0 design condition,while under 0.6 and 1.4 design condition it is lower.Under low flow rate conditions,radial vectors of absolute velocities at impeller outlet and blade inlet near the pump shaft decrease with increase of flow rate,while that of relative velocities at the suction side near the pump shaft decreases.Radial vectors of absolute velocities and relative velocities change slightly under the two large flow rate conditions.The research results can be applied to instruct the hydraulic optimization design of double blade pumps.展开更多
The methods and strategies used to screen for syphilis and to confirm initially reactive results can vary significantly across clinical laboratories.While the performance characteristics of these different approaches ...The methods and strategies used to screen for syphilis and to confirm initially reactive results can vary significantly across clinical laboratories.While the performance characteristics of these different approaches have been evaluated by multiple studies,there is not,as of yet,a single,universally recommende dalgorithm for syphilis testing.To clarify the currently available options for syphilis testing,this update will summarize the clinical challenges to diagnosis,review the specific performance characteristics of treponemal and non-treponemal tests,and finally,summarize select studies published over the past decade which have evaluated these approaches.Specifically,this review will discuss the traditional and reverse sequence syphilis screening algorithms commonly used in the United States,alongside a discussion of the European Centre for Disease Prevention and Control syphilis algorithm.Ultimately,in the United States,the decision of which algorithm to use is largely dependent on laboratory resources,the local incidence of syphilis and patient demographics.展开更多
Granular material mechanics,finite element analysis and crushing theory are applied to study the compressive comminution mechanism of particle beds in this paper.This is a new method by which we have established an eq...Granular material mechanics,finite element analysis and crushing theory are applied to study the compressive comminution mechanism of particle beds in this paper.This is a new method by which we have established an equivalent model of granular material,determined the values and distributions of contact forces and discovered a crushing law.The model has been tested on the newly designed equipment and proved to be correct.Some new characteristics and laws of compressive comminution of particle beds have been found.展开更多
Abstract The process of ion heating by a monochromatic obliquely propagating low-frequency Alfven wave is investigated. This process can be roughly divided into three stages: at first, the ions are picked up by the A...Abstract The process of ion heating by a monochromatic obliquely propagating low-frequency Alfven wave is investigated. This process can be roughly divided into three stages: at first, the ions are picked up by the Alfven wave in several gyro-periods and a bulk velocity in the transverse direction is achieved; then, the ions are scattered in the transverse direction by the wave, which produces phase differences between the ions and leads to ion heating, especially in the perpendicular direction; and finally, the ions are stochastically heated due to the sub- cyclotron resonance. In this paper, with a test particle method, the efficiency and time scale of the ion stochastic heating by a monochromatic obliquely propagating low-frequency Alfven wave are studied. The results show that with the increase of the amplitude, frequency, and propagation angle of the AlDen wave, the efficiency of the ion stochastic heating increases, while the time scale of the ion stochastic heating decreases. With the increase of the plasma beta β, the ions are stochastically heated with less efficiency, and the time scale increases. We also investigate the heating of heavy ion species (He2+ and O5+), which can be heated with a higher efficiency by the oblique Alfven wave.展开更多
We calculate the contributions of the vacuum fluctuations and radiation reaction to the rate of change of the mean atomic energy for a multi-level hydrogen atom in the multipolar coupling scheme in a spacetime with a ...We calculate the contributions of the vacuum fluctuations and radiation reaction to the rate of change of the mean atomic energy for a multi-level hydrogen atom in the multipolar coupling scheme in a spacetime with a reflecting boundary. Our results show that, due to the presence of the boundary, the polarizations of the atom in the parallel direction and in the normal direction are weighted differently in terms of their contributions to the spontaneous emission rate, which is an oscillating function of the atom distance from the boundary. The possible experimental implications of our result are briefly discussed.展开更多
Assuming that the effects of trans-Planckian physics are encoded in the choice of initial conditions, mode by mode, for vacuum states at the time when its wavelength becomes equal to the scale of new physics (Planck...Assuming that the effects of trans-Planckian physics are encoded in the choice of initial conditions, mode by mode, for vacuum states at the time when its wavelength becomes equal to the scale of new physics (Planck's scale for example), we calculate the spectrum of energy densities of total relic gravitational waves from de Sitter inflation to the matter dominated universe. Our results show that the spectrum acquires corrections due to the consideration of trans-Planckian physics and these corrections depend sensitively on the vacuum state that was actually realized at the beginning of the inflation.展开更多
Using the path-integral method, the corrections to the Casimir energy due to the combined effect of surface roughness and the finite temperature are calculated. For the specific case of two sinusoidally corrugated pla...Using the path-integral method, the corrections to the Casimir energy due to the combined effect of surface roughness and the finite temperature are calculated. For the specific case of two sinusoidally corrugated plates, the lateral Casimir force at finite temperature is obtained. The amplitude of the lateral Casimir force has a maximum at an optimal wavelength of λ≈ 2H with the mean plate distance H. This optimal parameter relation is almost independent of temperature.展开更多
By means of a formal analogy with the Aharonov-Bohm effect, the Sagnac time delay and the corresponding Sagnac phase shift in the Kerr-Newman and Reissner-Nordstrfm spacetimes are discussed. We find that the effect de...By means of a formal analogy with the Aharonov-Bohm effect, the Sagnac time delay and the corresponding Sagnac phase shift in the Kerr-Newman and Reissner-Nordstrfm spacetimes are discussed. We find that the effect depends on the properties of the source of the gravitational field. The contributions made by the electric charge of the gravitational source can be employed to weaken it in the Kerr-Newman spacetime, even if a phase shift and a time delay still appear. This is due to the properties of the rotating source of the gravitational field.展开更多
The interesting phenomenon of frame dragging which is associated with the rotation of the source in the field of Kerr family is discussed, and the angular velocity of an uncharged test particle is obtained with a stra...The interesting phenomenon of frame dragging which is associated with the rotation of the source in the field of Kerr family is discussed, and the angular velocity of an uncharged test particle is obtained with a straightforward mathematical method.展开更多
In order to get a sound casting of the alloy with a solidification range, the principle of directional solidification (DS) and the layer-by-layer solidification(LBLS) should be followed, especially in designing foundr...In order to get a sound casting of the alloy with a solidification range, the principle of directional solidification (DS) and the layer-by-layer solidification(LBLS) should be followed, especially in designing foundry process of steel casting. Using the principles, the reasons for the forming of the defects on the surface of the chain wheels teeth and groove and the forming of MT (magnetic particle testing) thin lines were analyzed. The results of the metallographic observation and the numerical simulation show that the low temperature gradient results in a wider mushy zone at the S/L interface that causes the defects and MT thin lines on the surface of the chain wheel casting. Based on the analysis, a new casting technology of the chain wheel was designed and used in the casting production successfully.展开更多
An unqualifed six-cylinder heavy truck crankshaft has been studied to investigate the cause of magnetic particle testing defects on the rod journals.Large-sized long-striped MnS inclusions are regarded as the major ca...An unqualifed six-cylinder heavy truck crankshaft has been studied to investigate the cause of magnetic particle testing defects on the rod journals.Large-sized long-striped MnS inclusions are regarded as the major cause for the magnetic particle testing failure because they have been detected in situ under the magnetic particle indications.Through the observation of macroscopic structures of the rod journals and corresponding counterweight blocks,it is found that for the 1#and 3#rod journals,the center metal of the original hot-rolled bar has been extruded to the inboard edge of the rod journals and large-sized long-striped MnS inclusions are exposed on the surface after fash removal,leading to the failure of magnetic particle testing.As for the 2#rod journal,the center metal of the original bar has not been extruded to the surface and MnS inclusions on the rod journal surface are small in size,few in number,resulting in passing the magnetic particle testing.If the quality of the hot-rolled bars fuctuates,it is more recommended to apply magnetic particle testing on samples at the center of bars before forging to evaluate the severity of defects caused by the long-striped MnS inclusions for fear of the scrap of the fnal crankshafts.展开更多
To solve the problems of blindness and inefficiency existing in the determination of meso-level mechanical parameters of particle flow code (PFC) models, we firstly designed and numerically carried out orthogonal test...To solve the problems of blindness and inefficiency existing in the determination of meso-level mechanical parameters of particle flow code (PFC) models, we firstly designed and numerically carried out orthogonal tests on rock samples to investigate the correlations between macro-and meso-level mechanical parameters of rock-like bonded granular materials. Then based on the artificial intelligent technology, the intelligent prediction systems for nine meso-level mechanical parameters of PFC models were obtained by creating, training and testing the prediction models with the set of data got from the orthogonal tests. Lastly the prediction systems were used to predict the meso-level mechanical parameters of one kind of sandy mudstone, and according to the predicted results the macroscopic properties of the rock were obtained by numerical tests. The maximum relative error between the numerical test results and real rock properties is 3.28% which satisfies the precision requirement in engineering. It shows that this paper provides a fast and accurate method for the determination of meso-level mechanical parameters of PFC models.展开更多
In order to better understand the mechanical properties of graded crushed rocks (GCRs) and to optimize the relevant design, a numerical test method based on the particle flow modeling technique PFC2D is developed fo...In order to better understand the mechanical properties of graded crushed rocks (GCRs) and to optimize the relevant design, a numerical test method based on the particle flow modeling technique PFC2D is developed for the California bearing ratio (CBR) test on GGRs. The effects of different testing conditions and micro-mechanical parameters used in the model on the CBR numerical results have been systematically studied. The reliability of the numerical technique is verified. The numerical results suggest that the influences of the loading rate and Poisson's ratio on the CBR numerical test results are not significant. As such, a loading rate of 1.0-3.0 mm/min, a piston diameter of 5 cm, a specimen height of 15 cm and a specimen diameter of 15 cm are adopted for the CBR numerical test. The numerical results reveal that the GBR values increase with the friction coefficient at the contact and shear modulus of the rocks, while the influence of Poisson's ratio on the GBR values is insignificant. The close agreement between the CBR numerical results and experimental results suggests that the numerical simulation of the CBR values is promising to help assess the mechanical properties of GGRs and to optimize the grading design. Be- sides, the numerical study can provide useful insights on the mesoscopic mechanism.展开更多
Atmosphere-Breathing Electric Propulsion(ABEP)can compensate for lost momentum of spacecraft operating in Very Low Earth Orbit(VLEO)which has been widely concerned due to its excellent commercial potential.It is a key...Atmosphere-Breathing Electric Propulsion(ABEP)can compensate for lost momentum of spacecraft operating in Very Low Earth Orbit(VLEO)which has been widely concerned due to its excellent commercial potential.It is a key technology to improve the capture efficiency of intakes,which collect and compress the atmosphere for ABEP.In this paper,the mechanism of the capture section affecting capture efficiency is investigated by Test Particle Monte Carlo(TPMC)simulations with 3D intake models.The inner surface smoothness and average collision number are determined to be key factors affecting capture efficiency,and a negative effect growth model is accordingly established.When the inner surface smoothness is less than 0.2,the highest capture efficiency and its corresponding average collision number interval are independent of the capture section’s geometry and its mesh size.When the inner surface smoothness is higher than 0.2,the capture efficiency will decrease by installing any capture section.Based on the present results,the manufacturing process and material selection are suggested to be prioritized during the intake geometry design in engineering projects.Then,the highest capture efficiency can be achieved by adjusting the length and mesh size of the capture section.展开更多
基金Project supported by the National Natural Science Foundation of China(Grant Nos.41204120 and 41304130)the Fundamental Research Funds for the Central Universities(Grant No.2042014kf0251)
文摘Modulated high frequency (HF) heating of the ionosphere provides a feasible means of artificially generating ex- tremely low frequency (ELF)/very low frequency (VLF) whistler waves, which can leak into the inner magnetosphere and contribute to resonant interactions with high energy electrons. Combining the ray tracing method and test particle simulations, we evaluate the effects of energetic electron resonant scattering driven by the discrete, multi-frequency arti- ficially generated ELF/VLF waves. The simulation results indicate a stochastic behavior of electrons and a linear profile of pitch angle and kinetic energy variations averaged over all test electrons. These features are similar to those associated with single-frequency waves. The computed local diffusion coefficients show that, although the momentum diffusion of relativistic electrons due to artificial ELF/VLF whistlers with a nominal amplitude of ~ 1 pT is minor, the pitch angle scattering can be notably efficient at low pitch angles near the loss cone, which supports the feasibility of artificial triggering of multi-frequency ELF/VLF whistler waves for the removal of high energy electrons from the magnetosphere. We also investigate the dependences of diffusion coefficients on the frequency interval (△f) of the discrete, multi-frequency waves. We find that there is a threshold value of Af for which the net diffusion coefficient of multi-frequency whistlers is inversely proportional to △f (proportional to the frequency components Nw) when △f is below the threshold value but it remains unchanged with increasing Af when △f is larger than the threshold value. This is explained as being due to the fact that the resonant scattering effect of broadband waves is the sum of the effects of each frequency in the 'effective frequency band'. Our results suggest that the modulation frequency of HF heating of the ionosphere can be appropriately selected with reasonable frequency intervals so that better performance of controlled precipitation of high energy electrons in the plasmasphere by artificial ELF/VLF whistler waves can be achieved.
基金funded by the Strategic Priority Research Program of Chinese Academy of Sciences Grant No. XDB41000000。
文摘Using the test particle simulation method, we investigate the stochastic motion of electrons with energy of 300 keV in a monochromatic magnetosonic(MS) wave field. This study is motivated by the violation of the quasi-linear theory assumption, when strong MS waves(amplitude up to ~1 nT) are present in the Earth's magnetosphere. First, electron motion can become stochastic when the wave amplitude exceeds a certain threshold. If an electron initially resonates with the MS wave via bounce resonance, as the bounce resonance order increases, the amplitude threshold of electron stochastic motion increases until it reaches the peak at about the 11 th order in our study, then the amplitude threshold slowly declines. Further, we find that the coexistence of bounce and Landau resonances between electrons and MS waves will significantly reduce the amplitude threshold. In some cases, the electron motion can become stochastic in the field of an MS wave with amplitudes below 1 nT. Regardless, if neither the bounce nor Landau resonance condition is satisfied initially, then the amplitude threshold of stochastic motion shows an increasing trend for lower frequencies and a decreasing trend for higher frequencies, even though the amplitude threshold is always very large(> 5 nT). Our study suggests that electron stochastic motion should also be considered when modeling electron dynamics regulated by intense MS waves in the Earth's magnetosphere.
基金Supported by the National Natural Science Foundation of China under Grant Nos 10375023 and 10575035, the Program for NCET (04-0784), the Key Project of the Ministry of Education of China (205110).
文摘We show that the velocity and position dispersions of a test particle with a nonzero constant classical velocity undergoing Brownian motion caused by electromagnetic vacuum fluctuations in a space with plane boundaries can be obgained from those of the static case by Lorentz transformation. We explicitly derive the Lorentz transformations relating the dispersions of the two cases and then apply them to the case of the Brownian motion of a test particle with a constant classical velocity parallel to the boundary between two conducting planes. Our results show that the influence of a nonzero initial velocity is negligible for nonrelativistic test particles.
基金Supported by the National Natural Science Foundation of China under Grant Nos 11275099,11435006 and 11405130
文摘Neglecting the self-force, self-energy and radiative effects, we follow the spirit of Wald's gedanken experiment and further discuss whether an extremal Kerr-Newman-AdS (KNA) black hole can turn into a naked singularity when it captures charged and spinning massive particles. It is found that feeding a test particle into an extremal KNA black hole could lead to a violation of cosmic censorship for the black hole.
基金supported by National Outstanding Young Scientists Founds of China (Grant No. 50825902)National Key Technology R&D Program of China (Grant No. 2008BAF34B15)+2 种基金National Natural Science Foundation of China (Grant No. 51079062)Jiangsu Provincial 333 High-level Personal Training Project of ChinaJiangsu Provincial Six Talent Peak of China
文摘The double blade pump is widely used in sewage treatment industry,however,the research on the internal flow characteristics of the double blade pump with particle image velocimetry(PIV) technology is very little at present.To reveal inner flow characteristics in double blade pump impeller under off-design and design conditions,inner flows in a double blade pump impeller,whose specific speed is 111,are measured under the five off-design conditions and design condition by using 3D PIV test technology.In order to ensure the accuracy of the 3D PIV test,the external trigger synchronization system which makes use of fiber optic and equivalent calibration method are applied.The 3D PIV relative velocity synthesis procedure is compiled by using Visual C++ 2005.Then absolute velocity distribution and relative velocity distribution in the double blade pump impeller are obtained.Test results show that vortex exists in each condition,but the location,size and velocity of vortex core are different.Average absolute velocity value of impeller outlet increases at first,then decreases,and then increases again with increase of flow rate.Again average relative velocity values under 0.4,0.8,and 1.2 design condition are higher than that under 1.0 design condition,while under 0.6 and 1.4 design condition it is lower.Under low flow rate conditions,radial vectors of absolute velocities at impeller outlet and blade inlet near the pump shaft decrease with increase of flow rate,while that of relative velocities at the suction side near the pump shaft decreases.Radial vectors of absolute velocities and relative velocities change slightly under the two large flow rate conditions.The research results can be applied to instruct the hydraulic optimization design of double blade pumps.
文摘The methods and strategies used to screen for syphilis and to confirm initially reactive results can vary significantly across clinical laboratories.While the performance characteristics of these different approaches have been evaluated by multiple studies,there is not,as of yet,a single,universally recommende dalgorithm for syphilis testing.To clarify the currently available options for syphilis testing,this update will summarize the clinical challenges to diagnosis,review the specific performance characteristics of treponemal and non-treponemal tests,and finally,summarize select studies published over the past decade which have evaluated these approaches.Specifically,this review will discuss the traditional and reverse sequence syphilis screening algorithms commonly used in the United States,alongside a discussion of the European Centre for Disease Prevention and Control syphilis algorithm.Ultimately,in the United States,the decision of which algorithm to use is largely dependent on laboratory resources,the local incidence of syphilis and patient demographics.
文摘Granular material mechanics,finite element analysis and crushing theory are applied to study the compressive comminution mechanism of particle beds in this paper.This is a new method by which we have established an equivalent model of granular material,determined the values and distributions of contact forces and discovered a crushing law.The model has been tested on the newly designed equipment and proved to be correct.Some new characteristics and laws of compressive comminution of particle beds have been found.
基金supported by National Natural Science Foundation of China(Nos.41274144,41174124,40931053,41121003)CAS Key ResearchProgram KZZD-EW-01973 Program of China(No.2012CB825602)
文摘Abstract The process of ion heating by a monochromatic obliquely propagating low-frequency Alfven wave is investigated. This process can be roughly divided into three stages: at first, the ions are picked up by the Alfven wave in several gyro-periods and a bulk velocity in the transverse direction is achieved; then, the ions are scattered in the transverse direction by the wave, which produces phase differences between the ions and leads to ion heating, especially in the perpendicular direction; and finally, the ions are stochastically heated due to the sub- cyclotron resonance. In this paper, with a test particle method, the efficiency and time scale of the ion stochastic heating by a monochromatic obliquely propagating low-frequency Alfven wave are studied. The results show that with the increase of the amplitude, frequency, and propagation angle of the AlDen wave, the efficiency of the ion stochastic heating increases, while the time scale of the ion stochastic heating decreases. With the increase of the plasma beta β, the ions are stochastically heated with less efficiency, and the time scale increases. We also investigate the heating of heavy ion species (He2+ and O5+), which can be heated with a higher efficiency by the oblique Alfven wave.
基金Supported by the National Natural Science Foundation of China under Grant Nos 10375023 and 10575035, the Programme for NCET (No 04-0784), and the Key Project of the Ministry of Education of China (No 205110).
文摘We calculate the contributions of the vacuum fluctuations and radiation reaction to the rate of change of the mean atomic energy for a multi-level hydrogen atom in the multipolar coupling scheme in a spacetime with a reflecting boundary. Our results show that, due to the presence of the boundary, the polarizations of the atom in the parallel direction and in the normal direction are weighted differently in terms of their contributions to the spontaneous emission rate, which is an oscillating function of the atom distance from the boundary. The possible experimental implications of our result are briefly discussed.
基金Supported by the National Natural Science Foundation of China under Grant No 10375023, the Program for NCET (No 04-0784), and the Key Project of the Ministry of Education of China (No 205110).
文摘Assuming that the effects of trans-Planckian physics are encoded in the choice of initial conditions, mode by mode, for vacuum states at the time when its wavelength becomes equal to the scale of new physics (Planck's scale for example), we calculate the spectrum of energy densities of total relic gravitational waves from de Sitter inflation to the matter dominated universe. Our results show that the spectrum acquires corrections due to the consideration of trans-Planckian physics and these corrections depend sensitively on the vacuum state that was actually realized at the beginning of the inflation.
基金Supported by the National Basic Research Programme of China under Grant No 2003CB716300, and the National Natural Science Foundation of China under Grant No 10505009.
文摘Using the path-integral method, the corrections to the Casimir energy due to the combined effect of surface roughness and the finite temperature are calculated. For the specific case of two sinusoidally corrugated plates, the lateral Casimir force at finite temperature is obtained. The amplitude of the lateral Casimir force has a maximum at an optimal wavelength of λ≈ 2H with the mean plate distance H. This optimal parameter relation is almost independent of temperature.
基金Supported by the National Major State Basic Research Project under China under Grant No 2003CB716300, and the Natural Science Foundation of Hunan Education Department under Grant Nos 03A028 and 05A038.
文摘By means of a formal analogy with the Aharonov-Bohm effect, the Sagnac time delay and the corresponding Sagnac phase shift in the Kerr-Newman and Reissner-Nordstrfm spacetimes are discussed. We find that the effect depends on the properties of the source of the gravitational field. The contributions made by the electric charge of the gravitational source can be employed to weaken it in the Kerr-Newman spacetime, even if a phase shift and a time delay still appear. This is due to the properties of the rotating source of the gravitational field.
文摘The interesting phenomenon of frame dragging which is associated with the rotation of the source in the field of Kerr family is discussed, and the angular velocity of an uncharged test particle is obtained with a straightforward mathematical method.
文摘In order to get a sound casting of the alloy with a solidification range, the principle of directional solidification (DS) and the layer-by-layer solidification(LBLS) should be followed, especially in designing foundry process of steel casting. Using the principles, the reasons for the forming of the defects on the surface of the chain wheels teeth and groove and the forming of MT (magnetic particle testing) thin lines were analyzed. The results of the metallographic observation and the numerical simulation show that the low temperature gradient results in a wider mushy zone at the S/L interface that causes the defects and MT thin lines on the surface of the chain wheel casting. Based on the analysis, a new casting technology of the chain wheel was designed and used in the casting production successfully.
基金The authors are grateful to the financial support provided by the National Natural Science Foundation of China(Grant Nos.51874034 and 51674024).
文摘An unqualifed six-cylinder heavy truck crankshaft has been studied to investigate the cause of magnetic particle testing defects on the rod journals.Large-sized long-striped MnS inclusions are regarded as the major cause for the magnetic particle testing failure because they have been detected in situ under the magnetic particle indications.Through the observation of macroscopic structures of the rod journals and corresponding counterweight blocks,it is found that for the 1#and 3#rod journals,the center metal of the original hot-rolled bar has been extruded to the inboard edge of the rod journals and large-sized long-striped MnS inclusions are exposed on the surface after fash removal,leading to the failure of magnetic particle testing.As for the 2#rod journal,the center metal of the original bar has not been extruded to the surface and MnS inclusions on the rod journal surface are small in size,few in number,resulting in passing the magnetic particle testing.If the quality of the hot-rolled bars fuctuates,it is more recommended to apply magnetic particle testing on samples at the center of bars before forging to evaluate the severity of defects caused by the long-striped MnS inclusions for fear of the scrap of the fnal crankshafts.
基金the National Natural Science Foundation of China (Nos. 50674083 and 51074162) for its financial support
文摘To solve the problems of blindness and inefficiency existing in the determination of meso-level mechanical parameters of particle flow code (PFC) models, we firstly designed and numerically carried out orthogonal tests on rock samples to investigate the correlations between macro-and meso-level mechanical parameters of rock-like bonded granular materials. Then based on the artificial intelligent technology, the intelligent prediction systems for nine meso-level mechanical parameters of PFC models were obtained by creating, training and testing the prediction models with the set of data got from the orthogonal tests. Lastly the prediction systems were used to predict the meso-level mechanical parameters of one kind of sandy mudstone, and according to the predicted results the macroscopic properties of the rock were obtained by numerical tests. The maximum relative error between the numerical test results and real rock properties is 3.28% which satisfies the precision requirement in engineering. It shows that this paper provides a fast and accurate method for the determination of meso-level mechanical parameters of PFC models.
基金supported by the Program for New Century Excellent Talents in University (NCET-08-0749)Fundamental Research Funds for the Central Universities (CHD2012JC054)
文摘In order to better understand the mechanical properties of graded crushed rocks (GCRs) and to optimize the relevant design, a numerical test method based on the particle flow modeling technique PFC2D is developed for the California bearing ratio (CBR) test on GGRs. The effects of different testing conditions and micro-mechanical parameters used in the model on the CBR numerical results have been systematically studied. The reliability of the numerical technique is verified. The numerical results suggest that the influences of the loading rate and Poisson's ratio on the CBR numerical test results are not significant. As such, a loading rate of 1.0-3.0 mm/min, a piston diameter of 5 cm, a specimen height of 15 cm and a specimen diameter of 15 cm are adopted for the CBR numerical test. The numerical results reveal that the GBR values increase with the friction coefficient at the contact and shear modulus of the rocks, while the influence of Poisson's ratio on the GBR values is insignificant. The close agreement between the CBR numerical results and experimental results suggests that the numerical simulation of the CBR values is promising to help assess the mechanical properties of GGRs and to optimize the grading design. Be- sides, the numerical study can provide useful insights on the mesoscopic mechanism.
基金the auspices of National Key R&D Program of China(No.2020YFC2201100)the National Natural Science Foundation of China(No.52077169)+1 种基金the State Key Laboratory of Electrical Insulation and Power Equipment,China(No.EIPE22116)HPC Platform,Xi’an Jiaotong University,China。
文摘Atmosphere-Breathing Electric Propulsion(ABEP)can compensate for lost momentum of spacecraft operating in Very Low Earth Orbit(VLEO)which has been widely concerned due to its excellent commercial potential.It is a key technology to improve the capture efficiency of intakes,which collect and compress the atmosphere for ABEP.In this paper,the mechanism of the capture section affecting capture efficiency is investigated by Test Particle Monte Carlo(TPMC)simulations with 3D intake models.The inner surface smoothness and average collision number are determined to be key factors affecting capture efficiency,and a negative effect growth model is accordingly established.When the inner surface smoothness is less than 0.2,the highest capture efficiency and its corresponding average collision number interval are independent of the capture section’s geometry and its mesh size.When the inner surface smoothness is higher than 0.2,the capture efficiency will decrease by installing any capture section.Based on the present results,the manufacturing process and material selection are suggested to be prioritized during the intake geometry design in engineering projects.Then,the highest capture efficiency can be achieved by adjusting the length and mesh size of the capture section.