Big Data Testing Techniques:Taxonomy,Challenges and Future Trends

Big Data is reforming many industrial domains by providing decision support through analyzing large data volumes.Big Data testing aims to ensure that Big Data systems run smoothly and error-free while maintaining the performance and quality of data.However,because of the diversity and complexity of data,testing Big Data is challenging.Though numerous research efforts deal with Big Data testing,a comprehensive review to address testing techniques and challenges of BigData is not available as yet.Therefore,we have systematically reviewed the Big Data testing techniques’evidence occurring in the period 2010–2021.This paper discusses testing data processing by highlighting the techniques used in every processing phase.Furthermore,we discuss the challenges and future directions.Our findings show that diverse functional,non-functional and combined(functional and non-functional)testing techniques have been used to solve specific problems related to Big Data.At the same time,most of the testing challenges have been faced during the MapReduce validation phase.In addition,the combinatorial testing technique is one of the most applied techniques in combination with other techniques(i.e.,random testing,mutation testing,input space partitioning and equivalence testing)to find various functional faults through Big Data testing.

Testing Forms in Web Applications Automatically

Forms enhance both the dynamic and interactive abilities of Web applications and the system complexity. And it is especially important to test forms completely and thoroughly. Therefore, this paper discusses how to carry out the form testing by different methods in the related testing phases. Namely, at first, automatically abstracting forms in the Web pages by parsing the HTML documents; then, ohtai ning the testing data with a certain strategies, such as by requirement specifications, by mining users＇ hefore input informarion or by recording meehanism; and next executing the testing actions automatically due to the well formed test cases; finally, a case study is given to illustrate the convenient and effective of these methods.

PHSICAL MODELLING AND PROCESSING OF Ti-6Al-4V ELI

Titanium has been widely used as the implant materials of joint prostheses. This paper simulates the microstructures of the hot forged titanium knee joint component by physical modeling. Ti-6Al-4V ELI were deformed by GLEEBLE 2000 hot deforma- tion simulator in compression mode to determine the hot workability, in the range of 900 to 1100℃, with the strain rates between 0.05 to 5 s^(-1). Test results derived from specimens processed by on-cooling test and on-heating test were compared, thereby estimating the effect due to thermal history. The forging process of Ti-6Al-4V ELI tibial base plate of knee joint prostheses was design based on the workability data obtained.

Research on Decalcification Degradation Process of Cement Stone

An accelerated laboratory method（saturated ammonium nitrate solution immersion method） was used to analyze the degradation of cement decalcification process. By studying the changes of intensity, volume, elastic modulus, quality, p H value, the Ca/Si, and mineral phase, it could be found that the first cement decalcification degradation process was the decalcification of calcium hydroxide, and then CSH gel, AFm, etc. The secondary ettringite deposition happened and the decalcification degradation depth was proportional to the square root of time. Moreover, the corresponding strength of cement would be gradually reduced, cement rock volume shrinkage occurred, p H values decreased, the surface elastic modulus decreased down to a certain level, and slightly changed and the Ca/Si was 3.1 from the beginning and lasted down to 1.3.

Rejection of Direct Blast Interference Based on Signal Phase-Matching Array Processing

In bistaic acoustic testing, there will be strong direct blast interference. An algorithm based on signal phase-matching array processing that rejects direct blast interference in bistatic acoustic testing has been studied, through which the object scattering signal is accurately extracted. Characteristics of bistatic acoustic testing and signal phase matching processing principle are fully integrated in this algorithm. Firstly, the direct blast interference is calculated from the receiving signal based on three subarrays signal phase matching processing. Secondly, the direct blast is rejected by subtraction from the receiving signal. In this way the limitations of the high signal to noise ratio that signal phase matching processing required for direct calculating the object scattering signal can be avoided. Simulation and sea trial results show that, when the ratio of signal to interference is greater than -20 dB, this algorithm of direct blast interference rejection based phase matching signal processing can accurately extract the object scattering signal.

Comparison between the electrical resistance and the shear strength of brazed cemented carbides

Brazing is a suitable technology to join different materials such as cemented carbides and steel. Even though this technology has been investigated for many years, insufficient joints can occur easily, as the brazing process is very sensitive concerning the handling parameters. Defects such as voids and cracks are hard to detect by commonly used visual inspection methods. Other nondestructive methods such as radiography or ultrasonic testing are usually not economical for the examination of these joints. Studies proved that the electrical resistance has the potential to serve as an effective alternative for the evaluation of brazed joints. In this study, the authors have compared the electrical resistance and the shear strength. For this, cemented carbides were brazed to steel by means of induction heating at an ambient atmosphere. A silver-based filler metal （ BrazeTec 4900 / Ag 449 ） and a flux （ BrazeTec spezial h / FH12） were selected to enable the brazing process. The brazing time and the temperature were varied in order to produce different joint qualities. After brazing, the resistance was measured on each joint with the 4-point probe method to facilitate a high accuracy. The results underline the possibility to use electrical resistance measurements as an effective tool for a quality control of brazed joints.

Design and process test of a novel MOEMS accelerometer based on Raman-Nath diffraction

A novel micro-opto-electro-mechanical system （MOEMS） accelerometer based on Raman-Nath diffraction is presented. It mainly consists of an FPW delay line oscillator and optical strip waveguides. The fun- damental theories and principles of the device are introduced briefly. A flexural plate-wave delay-line oscillator is designed to work as an acousto-optic （AO） shifter, which has a Klein-Cook parameter of 0.38. Single-mode optical strip waveguides of 2 μm in width and thicknesses of 0.6 μm are designed by using the effective index method for light transmission. The E^y00 mode waveguide polarizers are designed to ensure the consistency of the light polarization in the waveguides. The fabrication process, based on （100） oriented, 450-#m-thick silicon wafers is proposed in detail, and some difficulties in the process are discussed carefully. At last, a series of process tests are undertaken to solve the proposed problems. The results indicate that the proposed design and fabrication process of the device is dependable and realizable.

Test of Deep Seismic Reflection Profiling across Central Uplift of Qiangtang Terrane in Tibetan Plateau

A test of deep seismic reflection profiling across the central uplift or metamorphic belt of the Qiangtang （羌塘） terrane, Tibet plateau, provides a first image of the crustal structure. Complex reflection patterns in the upper crust are interpreted as a series of folds and thrusts, and bivergent reflections in the lower crust may represent a convergence between the Indian and the Eurasian plates.