Hydrothermal Synthesis and Phase-, Morphology-Evolution Mechanism of Lead Titanate Nanostructures Assisted with Tetramethylammonium Hydroxide

Lead titanate nanostructures with different phases and morphologies, layered hexagonal PbTiO2（CO3）0.3- （NO3）0.35（OH） nanosheets, pyrochlore Pb2Ti2O6 nanodendites, pre-perovskite PbTiO3 nanofibres and perovskite PbTiO3 nanoplates, have been synthesized via a conventional hydrothermal route assisted with different concentra- tions of tetramethylammonium hydroxide （TMAH）. X-ray diffraction （XRD）, scanning electron microscopy （SEM）, transmission electron microscopy （TEM）, and high-resolution TEM （HRTEM） were employed to characterize the phase, morphology and growth behavior of the synthesized samples. The results reveal that at low TMAH concen- tration the obtained samples are mainly of PbTiO2（CO3）o.3（NO3）0.35（OH） nanosheets. With the TMAH concentration increasing, the obtained samples change to pyrochlore Pb2Ti2O6 nanodendites, pre-perovskite PbTiO3 nanofibres and perovskite PbTiO3 nanoplates in turn. With the basis of the experimental results, the phase- and morpholo- gy-evolution mechanism of the lead titanate nanostructures is discussed by combining the analysis of the lattice structure feature and the properties of TMAH.

Studies on the Synthesis, Properties and Preparation Methods of Zeolite ZK-4

A zeolite designated as ZK-4 was synthesized hydrothermally in the system (TMA)2ONa2O-Al2O3- SiO2- H2O at 80 - 100℃ with tetramethylammonium hydroxide as an organic templating agent. The pure zeolite ZK-4 could be prepared by using the mother liquor obtained after filtration as the source of templating agent. The effect of some synthetic conditions such as the amount of tetramethylammonium hydroxide used, n [ (TMA)2O + Na2O] /n (Al2O3) ratio, n (SiO2)/n(Al2O3) ratio and crystallization time, etc. on the crystalline phase of the product was investigated. When the following molar ratios of the reaction mixture, n (SiO2)/n (Al2O3) 4-10, n[(TMA)2O+Na2O]/ n (Al2O3 ) > 7, n (Na2O)/n (Al2O3)=0. 5-2. 0, n (H2O)/ n(A12O3)=80-450, were used, pure zeolite ZK-4 could be obtained. The synthetic products were characterized by X-ray powder diffraction, atomic absorption spectrophotometry (AAS), adsorption measurement, thermogravimetric analysis(TGA), and 29Si magic angle spinning nuclear magnetic resonance technique. Zeolite ZK-4 has a higher thermal stability than sodium zeolite A due to higher n(Si)/n(Al) ratio of zeolite ZK-4.

High-efficient Isolation of Plant Viral RNA via TMAOH-modified Fe3O4 Magnetic Nanoparticles

Magnetic nanoparticles show great potential in RNA enrichment and separation for rapid detection of viral infection.Fundamental studies on the interaction between RNA and nanoparticles with uniform size and surface property are necessary for designing better adsorbent and optimizing the conditions.In this study,monodispersed superparamagnetic magnetite（Fe3O4） nanoparticles were synthesized by thermal decomposition and modified with tetramethylammonium hydroxide[N（CH3）4OH,TMAOH] that become highly dispersible and stable in water.High-efficiency plant viral RNA adsorption onto TMAOH/Fe3O4 nanoparticles in the extracted solution of plant leaves was demonstrated.The changes of surface charge of TMAOH on the Fe3O4 nanoparticles with pH contribute to the RNA adsorption and elution.Separating viral RNA with magnetic nanoparticles could be a simple,quick andhighly efficient method.