The recrystallization texture in commercially pure Al is investigated after the samples are rolled differently and annealed.The samples with low rol- ling reductions could be generally recovered or recrystallized in s...The recrystallization texture in commercially pure Al is investigated after the samples are rolled differently and annealed.The samples with low rol- ling reductions could be generally recovered or recrystallized in situ and characterized by the re- tained G{110}<001>component.This recovery process decreases during annealing with the increase of reduction.The appearance of the B/R{359}. <132>and R{123}<634>components de- pending on the rolling reduction is investigated and the less developed Cube{100}<001>component in commercially pure ahninium is also discussed.展开更多
The formulae of the relationships between Euler angles and texture are important for the orientation distribution functions of research materials.At present,it is found that the formulae for the orthogonal and hexagon...The formulae of the relationships between Euler angles and texture are important for the orientation distribution functions of research materials.At present,it is found that the formulae for the orthogonal and hexagonal crystal structure proposed by Roe and Bunge are not in accord with the normal direction(ND)being perpendicular to the rolling direction(RD).In this paper,these formulae are deduced independently according to the notations proposed by Roe and Bunge.The results show that in addition to the coincidence with the formulae for the cubic crystal structure given by the Roe and Bunge,the other formulae are different from Roe’s and Bunge’s.The new formulae are in accord with ND,RD,and transverse direction(TD)at right angles.展开更多
Using elastic crystalline viscoplastic finite element (FE) annlysis, the formability of BCC steel sheets was assessed. An orientation probability assignment method in the FE modeling procedure, which can be categorize...Using elastic crystalline viscoplastic finite element (FE) annlysis, the formability of BCC steel sheets was assessed. An orientation probability assignment method in the FE modeling procedure, which can be categorized as an inhomogenized material modeling, was newly proposed. In the study, the crystal orientations of three materials, mild steel, dual phase steel and the high strength steel, were obtained by Xray diffraction and orientation distribution function (ODF) analyses. The measured ODF results have revealed clearly different textures in the sheets, featured by orientation fibers, skeleton lines and selected orientations in Euler angle space, which are closely related to the plastic anisotropy. Then, the crystal orientations were assigned to FE integration points by using this ODF data, individually. The FE analyses of the standard limiting dome height (LDH) test show how the fiber textures affect the extent of strain localization in the forming processes. It was confirmed by comparison with experimental results that this FE code could predict the extreme strain localization and assess the sheet formability.展开更多
The phenomenon of earing is investigated in the present studybased on the theory of crystal plasticity with the dynamic explicityfinite element program developed. Firstly texture analysis is carriedout of rolled alumi...The phenomenon of earing is investigated in the present studybased on the theory of crystal plasticity with the dynamic explicityfinite element program developed. Firstly texture analysis is carriedout of rolled aluminum alloy A15052 by means of X-ray technique. Thenfrom the texture coefficients an analytical expression for theorientation distribution function (ODF) is derived making use of thecomputer algebraic language Mathematica4.0, which makes it easier todiscretize the ODF into a series of Eulerian angles repre- sentingthe distribution of lattices and further the preferred orientation(texture) of crystals of the original she- ets.展开更多
The microstructures and textures of four rectangular extruded Mg alloys, Mg-3Gd, Mg-3Nd, Mg-1Gd-1Nd and Mg-1.5Gd-1.5Nd（all in wt%） were investigated by using optical microscopy（OM）, X-ray diffraction（XRD） and el...The microstructures and textures of four rectangular extruded Mg alloys, Mg-3Gd, Mg-3Nd, Mg-1Gd-1Nd and Mg-1.5Gd-1.5Nd（all in wt%） were investigated by using optical microscopy（OM）, X-ray diffraction（XRD） and electron backscatter diffraction（EBSD）. The results demonstrate that the extruded alloys all reveal fully recrystallized microstructure and weak non-basal texture.For textures of the four extruded alloys, it is shown that the basal planes of majority grains tilt away from the sheet plane normal toward the extrusion direction. Compared with two binary alloys, the ternary alloys possess weaker texture strengths. Through orientation distribution function analysis, two types of rare earth textures, {0113} 〈0223〉and {1215} 〈1213〉, were found in the extruded alloys.Texture component {1215} 〈1213〉 is relatively weak, but it plays a critical role in the low texture intensities of two ternary alloys. A pairing effect of Gd and Nd elements has an influence on the texture modification. Additionally,there is a difference in the sensitivities of experimental parameters between the microstructure and texture.展开更多
The vector method (VM) of quantitative texture analysis has been entirely reconstructedin the Euler space using Roe’s notation. The reconstructed VM, called the generalized vectormethod (GVM), has got rid of the limi...The vector method (VM) of quantitative texture analysis has been entirely reconstructedin the Euler space using Roe’s notation. The reconstructed VM, called the generalized vectormethod (GVM), has got rid of the limitations arising from the original form of orientationrepresentation of the VM, such as the inconvenience in searching the relation between tex-tures and physical properties of materials, and conserves all the advantages of VM. The investigation on a cubic crystal system indicates that the texture vector of a samplemay be quantitatively determined with the GVM, using a complete or even an incompletepole figure. Also, the series expansion coefficients of the crystallite orientation distributionfunction (ODF) needed in calculating macroscopic anisotropies of the sample can be easilyevaluated.展开更多
以不同变形量对预先经过热轧和再结晶退火的DC AA 5052直接冷却铸造铝合金板进行冷轧制后,采用X射线衍射和专用软件测试、计算并分析表层、1/4厚度层、中心层的织构极图和ODF图及有关数据,研究板厚度方向轧制织构的变化情况,以为改进轧...以不同变形量对预先经过热轧和再结晶退火的DC AA 5052直接冷却铸造铝合金板进行冷轧制后,采用X射线衍射和专用软件测试、计算并分析表层、1/4厚度层、中心层的织构极图和ODF图及有关数据,研究板厚度方向轧制织构的变化情况,以为改进轧制工艺、获得板厚度方向的织构织及性能均匀性提供依据。各变形量的试样之表层向1/4层、中心层方向,存在β织构逐渐增强的梯度;变形量逐渐增大到90%的过程中,沿板厚度方向β织构强度的变化梯度逐渐降低、体积分数逐步增大、强度逐渐增大并达到各层基本接近。展开更多
文摘The recrystallization texture in commercially pure Al is investigated after the samples are rolled differently and annealed.The samples with low rol- ling reductions could be generally recovered or recrystallized in situ and characterized by the re- tained G{110}<001>component.This recovery process decreases during annealing with the increase of reduction.The appearance of the B/R{359}. <132>and R{123}<634>components de- pending on the rolling reduction is investigated and the less developed Cube{100}<001>component in commercially pure ahninium is also discussed.
基金Sponsored by the National Natural Science Foundation of China(Grant No.51962017)。
文摘The formulae of the relationships between Euler angles and texture are important for the orientation distribution functions of research materials.At present,it is found that the formulae for the orthogonal and hexagonal crystal structure proposed by Roe and Bunge are not in accord with the normal direction(ND)being perpendicular to the rolling direction(RD).In this paper,these formulae are deduced independently according to the notations proposed by Roe and Bunge.The results show that in addition to the coincidence with the formulae for the cubic crystal structure given by the Roe and Bunge,the other formulae are different from Roe’s and Bunge’s.The new formulae are in accord with ND,RD,and transverse direction(TD)at right angles.
基金the National Natural Science Foundation of China for financial support(Grant No.59875025) to the research cooperation with OIT,Japan
文摘Using elastic crystalline viscoplastic finite element (FE) annlysis, the formability of BCC steel sheets was assessed. An orientation probability assignment method in the FE modeling procedure, which can be categorized as an inhomogenized material modeling, was newly proposed. In the study, the crystal orientations of three materials, mild steel, dual phase steel and the high strength steel, were obtained by Xray diffraction and orientation distribution function (ODF) analyses. The measured ODF results have revealed clearly different textures in the sheets, featured by orientation fibers, skeleton lines and selected orientations in Euler angle space, which are closely related to the plastic anisotropy. Then, the crystal orientations were assigned to FE integration points by using this ODF data, individually. The FE analyses of the standard limiting dome height (LDH) test show how the fiber textures affect the extent of strain localization in the forming processes. It was confirmed by comparison with experimental results that this FE code could predict the extreme strain localization and assess the sheet formability.
基金the National Natural Science Foundation of China(No.59875025)
文摘The phenomenon of earing is investigated in the present studybased on the theory of crystal plasticity with the dynamic explicityfinite element program developed. Firstly texture analysis is carriedout of rolled aluminum alloy A15052 by means of X-ray technique. Thenfrom the texture coefficients an analytical expression for theorientation distribution function (ODF) is derived making use of thecomputer algebraic language Mathematica4.0, which makes it easier todiscretize the ODF into a series of Eulerian angles repre- sentingthe distribution of lattices and further the preferred orientation(texture) of crystals of the original she- ets.
基金financially supported by the Natural Science Foundation of Jiangsu Province for Youths (No. BK20130519)Foundation of Jiangsu University (No. 12JDG094)
文摘The microstructures and textures of four rectangular extruded Mg alloys, Mg-3Gd, Mg-3Nd, Mg-1Gd-1Nd and Mg-1.5Gd-1.5Nd（all in wt%） were investigated by using optical microscopy（OM）, X-ray diffraction（XRD） and electron backscatter diffraction（EBSD）. The results demonstrate that the extruded alloys all reveal fully recrystallized microstructure and weak non-basal texture.For textures of the four extruded alloys, it is shown that the basal planes of majority grains tilt away from the sheet plane normal toward the extrusion direction. Compared with two binary alloys, the ternary alloys possess weaker texture strengths. Through orientation distribution function analysis, two types of rare earth textures, {0113} 〈0223〉and {1215} 〈1213〉, were found in the extruded alloys.Texture component {1215} 〈1213〉 is relatively weak, but it plays a critical role in the low texture intensities of two ternary alloys. A pairing effect of Gd and Nd elements has an influence on the texture modification. Additionally,there is a difference in the sensitivities of experimental parameters between the microstructure and texture.
基金Project supported by the National Natural Science Foundation of China.
文摘The vector method (VM) of quantitative texture analysis has been entirely reconstructedin the Euler space using Roe’s notation. The reconstructed VM, called the generalized vectormethod (GVM), has got rid of the limitations arising from the original form of orientationrepresentation of the VM, such as the inconvenience in searching the relation between tex-tures and physical properties of materials, and conserves all the advantages of VM. The investigation on a cubic crystal system indicates that the texture vector of a samplemay be quantitatively determined with the GVM, using a complete or even an incompletepole figure. Also, the series expansion coefficients of the crystallite orientation distributionfunction (ODF) needed in calculating macroscopic anisotropies of the sample can be easilyevaluated.
文摘以不同变形量对预先经过热轧和再结晶退火的DC AA 5052直接冷却铸造铝合金板进行冷轧制后,采用X射线衍射和专用软件测试、计算并分析表层、1/4厚度层、中心层的织构极图和ODF图及有关数据,研究板厚度方向轧制织构的变化情况,以为改进轧制工艺、获得板厚度方向的织构织及性能均匀性提供依据。各变形量的试样之表层向1/4层、中心层方向,存在β织构逐渐增强的梯度;变形量逐渐增大到90%的过程中,沿板厚度方向β织构强度的变化梯度逐渐降低、体积分数逐步增大、强度逐渐增大并达到各层基本接近。
