Efficiency analysis of numerical integrations for finite element substructure in real-time hybrid simulation

Finite element（FE） is a powerful tool and has been applied by investigators to real-time hybrid simulations（RTHSs）. This study focuses on the computational efficiency, including the computational time and accuracy, of numerical integrations in solving FE numerical substructure in RTHSs. First, sparse matrix storage schemes are adopted to decrease the computational time of FE numerical substructure. In this way, the task execution time（TET） decreases such that the scale of the numerical substructure model increases. Subsequently, several commonly used explicit numerical integration algorithms, including the central difference method（CDM）, the Newmark explicit method, the Chang method and the Gui-λ method, are comprehensively compared to evaluate their computational time in solving FE numerical substructure. CDM is better than the other explicit integration algorithms when the damping matrix is diagonal, while the Gui-λ（λ = 4） method is advantageous when the damping matrix is non-diagonal. Finally, the effect of time delay on the computational accuracy of RTHSs is investigated by simulating structure-foundation systems. Simulation results show that the influences of time delay on the displacement response become obvious with the mass ratio increasing, and delay compensation methods may reduce the relative error of the displacement peak value to less than 5% even under the large time-step and large time delay.

The Agriculture-Tourism Integration to Promote the Rural Revitalization:Taking Tea Industry-Agriculture-Tourism in Lishui City as an Example

This paper introduces the typical and representative villages,towns and projects in Longquan,Suichang and Songyang in Lishui City,deeply investigates and researches the agriculture-tourism development model of"one specialty for one county,one brand for one place"in Lishui City,and summarizes the experience and lesson of rural revitalization to promote the agriculture-tourism integration,which can be used as a reference for Pingyang and other counties and districts.

Integrated Assessment of Trapping Efficiency of Colored Sticky Cards and Sex Pheromone on Liriomyza spp.and Plutella xylostella

[Objective] To evaluate the control effect of yellow sticky cards and sex pheromone on Plutella xylostella and Liriomyza spp.,which can provide reference for large area extension of the technique.[Method] The integrated assessment of trapping efficiency of colored sticky cards and sex pheromone on Liriomyza spp.and Plutella xylostella was conducted by field surveys and structured interview in Tonghai County,Yunnan Province,China.[Result] The results showed that yellow sticky cards and sex pheromone have strong power of trapping Liriomyza spp.and Plutella xylostella（3 414±720 and（219±157） head/piece,respectively）;the control cost by the usage of pesticide is the highest,（10 099.5±2 752.5） yuan/hm^2,yellow sticky cards and sex pheromone takes the second place,（1 125.0±465.0） yuan/hm^2,the control cost by the usage of yellow sticky cards is the lowest,（450.0 ±186.0）yuan/hm^2.Without the usage of yellow sticky cards and sex pheromone,pesticide application times and costs are（15.0±2.7） times and（12 070.5±2 136.0） yuan/hm^2;combined with usage of yellow sticky cards and sex pheromone,pesticide application times and costs reduce by 5.7 times and 4 618.5 yuan/hm^2.The ratio of trapped beneficial insects and target pests was 1 ∶1 131,which showed that the negative effect of yellow sticky cards and sex pheromone on the non-target insects was very limited.[Conclusion] The trapping approach has become popular among all the local farmers.Looking at the above factors,the trapping technology has strong application prospect and promotion value in pest control field.

Optimizing integrative cultivation management improves grain quality while increasing yield and nitrogen use efficiency in rice

A major challenge in rice(Oryza sativa L.)production is to cope with increasing grain yield and fertilizer use efficiency without compromising grain quality.This study was designed to determine if optimizing integrative cultivation management in rice could improve grain quality while increase yield and nitrogen use efficiency(NUE).An indica-japonica hybrid rice cultivar and a japonica rice cultivar were grown in the field,with five cultivation managements including no N application(0 N),local farmer's practice(LFP),and three optimizi ng in teg rati ve cultivati on managements,reducing N rate and increasi ng plant density(ND),ND+alternate wetting and moderate soil drying irrigation(NDW),and NDW+applying rapeseed cake fertilizer(NDWR).The results showed that the optimizi ng integrative cultivati on man ageme nts could not only in crease grain yield,but also enhance NUE compared to LFP.Compared to LFP,NDWR sign ifica ntly in creased brow n,milled,head milled rice rate,ratio of the kern el le ngth to breadth and breakdown value of starch,whereas decreased amylose content,gel consiste ncy,prolamin con tent,setback value,perce ntage of chalky kern els,and chalki ness.The three optimizing in tegrative cultivation managements increased con tents of total protei ns,albumin and glutelin,activities of the key enzymes involved in the sucrose-starch con version in grains,root oxidati on activity,and malic and succinic acid concentrations in root exudates during the grain-filling period.The results suggested that optimizing integrative cultivation managements could improve grain quality meanwhile increase grain yield and NUE by enhancing physiological activities of rice plants.

Integrated agronomic practice increases maize grain yield and nitrogen use efficiency under various soil fertility conditions

Crop yield potential can be increased through the use of appropriate agronomic practices. Integrated agronomic practice (IAP) is an effective way to increase maize (Zea mays L.) grain yield and nitrogen use efficiency (NUE);however, the physiological processes associated with gains in yield potential obtained from IAP, particularly the different under various soil fertility conditions, remain poorly understood. An IAP strategy including optimal planting density, split fertilizer application, and subsoiling tillage was evaluated over two growing seasons to determine whether the effects of IAP on maize yield and NUE differ under different levels of soil fertility. Compared to farmers' practices (FP), IAP increased maize grain yield in 2013 and 2014 by 25% and 28%, respectively, in low soil fertility (LSF) fields and by 36% and 37%, respectively, in high soil fertility (HSF) fields. The large yield gap was attributed mainly to greater dry matter (DM) and N accumulation with IAP than with FP owing to increased leaf area index (LAI) and DM accumulation rate, which were promoted by greater soil mineral N content (Nmin) and root length. Post-silking DM and N accumulation were also greater with IAP than with FP under HSF conditions, accounting for 60% and 43%, respectively, of total biomass and N accumulation;however, no significant differences were found for post-silking DM and N accumulation between IAP and FP under LSF conditions. Thus, the increase in grain yield with IAP was greater under HSF than under LSF. Because of greater grain yield and N uptake, IAP significantly increased N partial factor productivity, agronomic N efficiency, N recovery efficiency, and physiological efficiency of applied N compared to FP, particularly in the HSF fields. These results indicate that considerable further increases in yield and NUE can be obtained by increasing effective soil N content and maize root length to promote post-silking N and DM accumulation in maize planted at high plant density, especially in fields with low soil fertility.

Integrated management strategy for improving the grain yield and nitrogen-use efficiency of winter wheat

Understanding of how combinations of agronomic options can be used to improve the grain yield and nitrogen use efficiency（NUE） of winter wheat is limited. A three-year experiment involving four integrated management strategies was conducted from 2013 to 2015 in Tai＇an, Shandong Province, China, to evaluate changes in grain yield and NUE. The integrated management treatments were as follows： current practice（T1）; improvement of current practice（T2）; high-yield management（T3）, which aimed to maximize grain yield regardless of the cost of resource inputs; and integrated soil and crop system management（T4） with a higher seeding rate, delayed sowing date, and optimized nutrient management. Seeding rates increased by 75 seeds m^-2 with each treatment from T1（225 seeds m^-2） to T4（450 seeds m^-2）. The sowing dates were delayed from T1（5 th Oct.） to T2 and T3（8 th Oct.）, and to T4 treatment（12 th Oct.）. T1, T2, T3, and T4 received 315, 210, 315, and 240 kg N ha^-1, 120, 90, 210 and 120 kg P2O5 ha^-1, 30, 75, 90, and 45 kg K2O ha^-1, respectively. The ratio of basal application to topdressing for T1, T2, T3, and T4 was 6：4, 5：5, 4：6, and 4：6, respectively, with the N topdressing applied at regreening for T1 and at jointing stage for T2, T3, and T4. The P fertilizers in all treatments were applied as basal fertilizer. The K fertilizer for T1 and T2 was applied as basal fertilizer while the ratio of basal application to topdressing（at jointing stage） of K fertilizer for both T3 and T4 was 6：4. T1, T2, T3, and T4 were irrigated five, four, four and three times, respectively. Treatment T3 produced the highest grain yield among all treatments over three years and the average yield was 9 277.96 kg ha^-1. Grain yield averaged across three years with the T4 treatment（8 892.93 kg ha^-1） was 95.85% of that with T3 and was 21.72 and 6.10% higher than that with T1（7 305.95 kg ha^-1） and T2（8 381.41 kg ha^-1）, respectively. Treatment T2 produced the highest NUE of all the integrated treatments. The NUE with T4 was 95.36% of that with T2 and was 51.91 and 25.62% higher than that with T1 and T3, respectively. The N uptake efficiency（UPE） averaged across three years with T4 was 50.75 and 16.62% higher than that with T1and T3, respectively. The N utilization efficiency（UTE） averaged across three years with T4 was 7.74% higher than that with T3. The increased UPE with T4 compared with T3 could be attributed mostly to the lower available N in T4, while the increased UTE with T4 was mainly due to the highest N harvest index and low grain N concentration, which consequently led to improved NUE. The net profit for T4 was the highest among four treatments and was 174.94, 22.27, and 28.10% higher than that for T1, T2, and T3, respectively. Therefore, the T4 treatment should be a recommendable management strategy to obtain high grain yield, high NUE, and high economic benefits in the target region, although further improvements of NUE are required.

Integrated water vapor during active and break spells of monsoon and its relationship with temperature,precipitation and precipitation efficiency over a tropical site

Global Positioning System(GPS)measurements of integrated water vapor(IWV)for two years(2014 and 2015)are presented in this paper.Variation of IWV during active and break spells of Indian summer monsoon has been studied for a tropical station Hyderabad(17.4°N,78.46°E).The data is validated with ECMWF Re-Analysis(ERA)91 level data.Relationships of IWV with other atmospheric variables like surface temperature,rain,and precipitation efficiency have been established through cross-correlation studies.A positive correlation coefficient is observed between IWV and surface temperature over two years.But the coefficient becomes negative when only summer monsoon months(June,July,August,and September)are considered.Rainfall during these months cools down the surface and could be the reason for this change in the correlation coefficient.Correlation studies between IWV-precipitation,IWVprecipitation efficiency(P.E),and precipitation-P.E show that coefficients are-0.05,-0.10 and 0.983 with 95%confidence level respectively,which proves that the efficacy of rain does not depend only on the level of water vapor.A proper dynamic mechanism is necessary to convert water vapor into the rain.The diurnal variations of IWV during active and break spells have been analyzed.The amplitudes of diurnal oscillation and its harmonics of individual spell do not show clear trends but the mean amplitudes of the break spells are approximately double than those of the active spells.The amplitudes of diurnal,semidiurnal and ter-diurnal components during break spells are 1.08 kg/m^(2),0.52 kg/m;and 0.34 kg/m;respectively.The corresponding amplitudes during active spells are 0.68 kg/m^(2),0.41 kg/m;and 0.23 kg/m;.

Integrated energy efficiency evaluation of a multi-source multi-load desalination micro-energy network

With increasing global shortage of fresh water resources,many countries are prioritizing desalination as a means of utilizing abundantly available seawater resources.Integrated energy efficiency evaluation is a scientific method for the quantitative analysis of energy efficiency based on multiple indicators and is very useful for investment,construction,and scientific decision-making for desalination projects.In this paper,the energy efficiency evaluation of the micro energy network (MEN) of desalination for multi-source and multi-load is studied,and the basic idea of comprehensive energy efficiency evaluation is analyzed.The process includes the use of a MEN model to establish an integrated energy efficiency evaluation index system,taking into consideration energy,equipment,economic,environmental,and social factors.A combined evaluation method considering subjective and objective comprehensive weights for multi-source multi-load desalination MENs is proposed to evaluate the energy efficiency of desalination and from multiple perspectives.

Water and nitrogen footprint assessment of integrated agronomic practice management in a summer maize cropping system

The footprints of water and nitrogen(WF and NF)provide a comprehensive overview of the type and quantity of water consumption and reactive nitrogen(Nr)loss in crop production.In this study,a field experiment over two years(2019 and 2020)compared three integrated agronomic practice management(IAPM)systems:An improved management system(T2),a high-yield production system(T3),and an integrated soil-crop management system(ISCM)using a local smallholder farmer’s practice system(T1)as control,to investigate the responses of WF,Nr losses,water use efficiency(WUE),and nitrogen use efficiency(NUE)to IAPM.The results showed that IAPM optimized water distribution and promoted water use by summer maize.The evapotranspiration over the whole maize growth period of IAPM increased,but yield increased more,leading to a significant increase in WUE.The WUE of the T2,T3,and ISCM treatments was significantly greater than in the T1 treatment,in 2019 and 2020respectively,by 19.8-21.5,31.8-40.6,and 34.4-44.6%.The lowest WF was found in the ISCM treatment,which was 31.0%lower than that of the T1 treatment.In addition,the ISCM treatment optimized soil total nitrogen(TN)distribution and significantly increased TN in the cultivated layer.Excessive nitrogen fertilizer was applied in treatment T3,producing the highest maize yield,and resulting in the highest Nr losses.In contrast,the ISCM treatment used a reduced nitrogen fertilizer rate,sacrificing grain yield partly,which reduced Nr losses and eventually led to a significant increase in nitrogen use efficiency and nitrogen recovery.The Nr level in the ISCM treatment was34.8%lower than in the T1 treatment while NUE was significantly higher than in the T1 treatment by 56.8-63.1%in2019 and 2020,respectively.Considering yield,WUE,NUE,WF,and NF together,ISCM should be used as a more sustainable and clean system for sustainable production of summer maize.

The response of roots and the rhizosphere environment to integrative cultivation practices in paddy rice

Integrative cultivation practices(ICPs)are essential for enhancing cereal yield and resource use efficiency.However,the effects of ICP on the rhizosphere environment and roots of paddy rice are still poorly understood.In this study,four rice varieties were produced in the field.Each variety was treated with six different cultivation techniques,including zero nitrogen application(0 N),local farmers’practice(LFP),nitrogen reduction(NR),and three progressive ICP techniques comprised of enhanced fertilizer N practice and increased plant density(ICP1),a treatment similar to ICP1 but with alternate wetting and moderate drying instead of continuous flooding(ICP2),and the same practices as ICP2 with the application of organic fertilizer(ICP3).The ICPs had greater grain production and nitrogen use efficiency than the other three methods.Root length,dry weight,root diameter,activity of root oxidation,root bleeding rate,zeatin and zeatin riboside compositions,and total organic acids in root exudates were elevated with the introduction of the successive cultivation practices.ICPs enhanced nitrate nitrogen,the activities of urease and invertase,and the diversity of microbes(bacteria)in rhizosphere and non-rhizosphere soil,while reducing the ammonium nitrogen content.The nutrient contents(ammonium nitrogen,total nitrogen,total potassium,total phosphorus,nitrate,and available phosphorus)and urease activity in rhizosphere soil were reduced in all treatments in comparison with the non-rhizosphere soil,but the invertase activity and bacterial diversity were greater.The main root morphology and physiology,and the ammonium nitrogen contents in rhizosphere soil at the primary stages were closely correlated with grain yield and internal nitrogen use efficiency.These findings suggest that the coordinated enhancement of the root system and the environment of the rhizosphere under integrative cultivation approaches may lead to higher rice production.

A New Dynamic and Vertical Photovoltaic Integrated Building Envelope for High-Rise Glaze-Facade Buildings

Substantially glazed facades are extensively used in contemporary high-rise buildings to achieve attractive architectural aesthetics.Inherent conflicts exist among architectural aesthetics,building energy consumption,and solar energy harvesting for glazed facades.In this study,we addressed these conflicts by introducing a new dynamic and vertical photovoltaic integrated building envelope(dvPVBE)that offers extraordinary flexibility with weather-responsive slat angles and blind positions,superior architectural aesthetics,and notable energy-saving potential.Three hierarchical control strategies were proposed for different scenarios of the dvPVBE:power generation priority(PGP),natural daylight priority(NDP),and energy-saving priority(ESP).Moreover,the PGP and ESP strategies were further analyzed in the simulation of a dvPVBE.An office room integrated with a dvPVBE was modeled using EnergyPlus.The influence of the dvPVBE in improving the building energy efficiency and corresponding optimal slat angles was investigated under the PGP and ESP control strategies.The results indicate that the application of dvPVBEs in Beijing can provide up to 131%of the annual energy demand of office rooms and significantly increase the annual net energy output by at least 226%compared with static photovoltaic(PV)blinds.The concept of this novel dvPVBE offers a viable approach by which the thermal load,daylight penetration,and energy generation can be effectively regulated.

A Super-High-Efficiency Algorithm for the Calculation of the Correlation Integral

When the chaotic characteristics of manufacturing quality level are studied, it is not practical to use chaotic methods because of the low speed of calculating the correlation integral. The original algorithm used to calculate the correlation integral is studied after a computer hardware upgrade. The result is that calculation of the correlation integral can be sped up only by improving the algorithm. This is accomplished by changing the original algorithm in which a single distance threshold-related correlation integral is obtained from one traversal of all distances between different vectors to a high-efficiency algorithm in which all of the distance threshold-related correlation integrals are obtained from one traversal of all of the distances between different vectors. For a time series with 3000 data points, this high-efficiency algorithm offers a 3.7-fold increase in speed over the original algorithm. Further study of the high-efficiency algorithm leads to the development of a super-high-efficiency algorithm, which is accomplished by changing the original and high-efficiency algorithms, in which the add-one operation of the Heaviside function is executed n times, such that the execution of the add-one operation occurs only once. The super-high-efficiency algorithm results in increases in the calculation speed by up to 109 times compared with the high-efficiency algorithm and by approximately 404 times compared with the original algorithm. The calculation speed of the super-high-efficiency algorithm is suitable for practical use with the chaotic method.

High-efficiency Approach for Fabricating MTE Rotor by Micro-EDM and Micro-extrusion

Micro-gas turbine engine（MTE） rotor is an important indicator of its property, therefore, the manufacturing technology of the microminiature rotor has become a hot area of research at home and abroad. At present, the main manufacturing technologies of the MTE rotor are directed forming fabrication technologies. However, these technologies have a series of problems, such as complex processing technology high manufacturing cost, and low processing efficiency, and so on. This paper takes advantage of micro electric discharge machining（micro-EDM） in the field of microminiature molds manufacturing, organizes many processing technologies of micro-EDM reasonably to improve processing accuracy, presents an integrated micro-EDM technology and its process flow to fabricate MTE rotor die, and conducts a series of experiments to verify efficiency of this integrated micro-EDM. The experiments results show that the MTE rotor die has sharp outline and ensure the good consistency of MTE rotor blades. Meanwhile, the MTE rotor die is applied to micro extrusion equipment, and technologies of micro-EDM and micro forming machining are combined based on the idea of the molds manufacturing, so the MTE rotor with higher aspect ratio and better consistency of blades can be manufactured efficiently. This research presents an integrated micro-EDM technology and its process flow, which promotes the practical process of MTE effectively.

A comparison of two formulations of the fin efficiency for straight fins

A formulation of the fin efficiency based on New- ton＇s law of cooling is compared with a formulation based on a ratio of heat transferred from the fin surface to the sur- rounding fluid to the heat conducted through the base. The first formulation requires that the solution of the nonlinear fin equations for constant heat transfer coefficient and constant thermal conductivity is known, whilst the second formulation of the fin efficiency requires only that a first integral of the model equation is known. This paper shows the first for- mulation of the fin efficiency contains approximation errors as only power series and approximate solutions to the non- linear fin equations have been determined. The second for- mulation of the fin efficiency is exact when the first integrals can be determined.

Frequency-Diversified Space-Efficient Radiating Surface Using Convolved Electric and Magnetic Currents for Highly Dense Multiband Antenna-Frontend Integration

We propose and investigate a methodology based on convolved electric and magnetic currents for the generation of multi-band responses over a space-shared radiating surface.First,a single wideband antenna operation principle based on inter-leaved dipole and slot modes is studied and analyzed using full-wave simulations followed by a qualitative time domain analysis.Subsequently,a 2×2 dual-band radiating unit is conceived and developed by closely arranging single wideband antennas.In this case,multimode resonances are generated in a lower frequency band by a proper convolving and coupling of the magnetic and electric currents realized in the gaps between the antennas and on the surface of the antennas,respectively.This methodology can be deployed repeatedly to build up a self-scalable topology by reusing the electromagnetically(EM)connected radiating surfaces and gaps be-tween the radiating units.Due to the efficient reuse of the electromagnetic region for the development of multiband radiation,a high aperture-reuse efficiency is achieved.Finally,as a proof of concept,a 2×4 dual-band array operating in Ku-and Ka-bands is devel-oped and fabricated by a linear arrangement of the two developed radiating units.Our measurement results show that the proposed antenna array provides impedance and gain bandwidths of 30%and 25.4%in the Ku-band and 10.65%and 8.52%in the Ka-band,respectively.

Thermal performance of integration of solar collectors and building envelopes

The integration of building with solar collector was studied. The theoretical model of integration of building envelopes and flat plate solar collectors was set up and the thermal performance of integration was studied in winter and summer,and compared to envelopes without solar collectors. The results show that the solar collection efficiency is raised in the integration of building envelopes and solar collectors with the air layer doors closed. This is true whether in winter or summer. The increment is higher as the inlet water temperature increases or the ambient temperature is low. In winter,the heat loss is significantly reduced through integration of the building envelopes and solar collectors with the closed air layer doors. The integration with the open air layer door is worse than that without collectors. In summer,the heat gains of the integration of envelopes and solar collectors are more obviously reduced than envelopes without collectors,the integration with the open air layer door is a little better than the closed one,but the difference is very small.

Efficiency analysis of trilateral-cycle power systems for waste heat recovery-to-power generation

Numerous innovative heat recovery-to-power technologies have been resourcefully and technologically exploited to bridge the growing gap between energy needs and its sustainable and affordable supply.Among them,the proposed trilateral-cycle(TLC) power system exhibits high thermodynamic efficiency during heat recovery-to-power from low-to-medium temperature heat sources.The TLCs are proposed and analysed using n-pentane as working fluid for waste heat recovery-to-power generation from low-grade heat source to evaluate the thermodynamic efficiency of the cycles.Four different single stage TLC configurations with distinct working principles are modelled thermodynamically using engineering equation solver.Based on the thermodynamic framework,thermodynamic performance simulation and efficiency analysis of the cycles as well as the exergy efficiencies of the heating and condensing processes are carried out and compared in their efficiency.The results show that the simple TLC,recuperated TLC,reheat TLC and regenerative TLC operating at subcritical conditions with cycle high temperature of 473 K can attain thermal efficiencies of 21.97%,23.91%,22.07% and 22.9%,respectively.The recuperated TLC attains the highest thermodynamic efficiency at the cycle high temperature because of its lowest exergy destruction rates in the heat exchanger and condenser.The efficiency analysis carried out would assist in guiding thermodynamic process development and thermal integration of the proposed cycles.

On the Maximum of Wind Power Efficiency

In our paper we demonstrate that the filtration equation used by Gorban’ et al. for determining the maximum efficiency of plane propellers of about 30 percent for free fluids plays no role in describing the flows in the atmospheric boundary layer (ABL) because the ABL is mainly governed by turbulent motions. We also demonstrate that the stream tube model customarily applied to derive the Rankine-Froude theorem must be corrected in the sense of Glauert to provide an appropriate value for the axial velocity at the rotor area. Including this correction leads to the Betz-Joukowsky limit, the maximum efficiency of 59.3 percent. Thus, Gorban’ et al.’s 30% value may be valid in water, but it has to be discarded for the atmosphere. We also show that Joukowsky’s constant circulation model leads to values of the maximum efficiency which are higher than the Betz-Jow-kowsky limit if the tip speed ratio is very low. Some of these values, however, have to be rejected for physical reasons. Based on Glauert’s optimum actuator disk, and the results of the blade-element analysis by Okulov and S&oslashrensen we also illustrate that the maximum efficiency of propeller-type wind turbines depends on tip-speed ratio and the number of blades.

高校服务新质生产力发展的能力审视与评价机制改革

新质生产力以科技创新为驱动,以高层次创新型人才为支撑,以战略性新兴产业和未来产业为载体,是高效能、高质量的新质态生产力。新质生产力的持续发展要求高校为之提供新质性的人才和科技支持,但长期以来基于效率取向的高校评价模式束缚了高校的生产力和服务力。深化高校评价机制改革,构建质量取向的新评价体系,是高校解放生产力,有效参与和服务新质生产力发展的必要举措。构建新的评价体系,当务之急是塑立基于“质量与贡献”的评价标准,改革政府主导的行政性评价,促进高校评价的生态化,强化高校自我评价的发展价值。