Multiple Uplift and Exhumation of the Southeastern Tibetan Plateau:Evidence from Low-Temperature Thermochronology

Since the Cenozoic,the Tibetan Plateau has experienced large-scale uplift and outgrowth due to the India-Asia collision.However,the mechanism and timing of these tectonic processes still remain debated.Here,using apatite fission track dating and inverse thermal modeling,we explore the mechanism of different phases of rapid cooling for different batholiths and intrusions in the southeastern Tibetan Plateau.In contrast to previous views,we find that the coeval granitic batholith exposed in the same tectonic zone experienced differential fast uplift in different sites,indicating that the present Tibetan Plateau was the result of differential uplift rather than the entire lithosphere uplift related to lithospheric collapse during Cenozoic times.In addition,we also suggest that the 5-2 Ma mantle-related magmatism should be regarded as the critical trigger for the widely coeval cooling event in the southeastern Tibetan Plateau,because it led to the increase in atmospheric CO_(2)level and a hotter upper crust than before,which are efficient for suddenly fast rock weathering and erosion.Finally,we propose that the current landform of the southeastern Tibetan Plateau was the combined influences of tectonic and climate.

Hydrocarbon Generation Potential and Organic Matter Enrichment Mechanism of the Cambrian Marine Shale in the Tadong Low Uplift,Tarim Basin

Cambrian shales in China and elsewhere contain abundant oil and gas resources.However,due to its deep burial and limited outcrop,there has been relatively little research conducted on it.The Cambrian shale of the Tadong low uplift in the Tarim Basin of western China,specifically the Xidashan-Xishanbulake Formation(Fm.)and overlying Moheershan Fm.provide a case study through the use of organic petrology,mineralogy,organic and elemental geochemistry,with the aim of analyzing and exploring the hydrocarbon generation potential(PG)and organic matter(OM)enrichment mechanisms within these shale formations.The results indicate that:(1)the Cambrian shale of the Tadong low uplift exhibits relatively dispersed OM that consists of vitrinite-like macerals and solid bitumen.These formations have a higher content of quartz and are primarily composed of silica-based lithology;(2)shale samples from the Xidashan-Xishanbulake and Moheershan formations demonstrate high total organic carbon(TOC)and low pyrolytic hydrocarbon content(S_(2))content.The OM is predominantly typeⅠand typeⅡkerogens,indicating a high level of maturation in the wet gas period.These shales have undergone extensive hydrocarbon generation,showing characteristics of relatively poor PG;(3)the sedimentary environments of the Xidashan-Xishanbulake and Moheershan formations in the Tadong low uplift are similar.They were deposited in warm and humid climatic conditions,in oxygen-deficient environments,with stable terrigenous inputs,high paleoproductivity,high paleosalinity,weak water-holding capacity,and no significant hydrothermal activity;and(4)the relationship between TOC and the paleoproductivity parameter(P/Ti)is most significant in the Lower Cambrian Xidashan-Xishanbulake Fm.,whereas correlation with other indicators is not evident.This suggests a productivity-driven OM enrichment model,where input of landderived material was relatively small during the Middle Cambrian,and the ancient water exhibited lower salinity.A comprehensive pattern was formed under the combined control of paleoproductivity and preservation conditions.This study provides valuable guidance for oil and gas exploration in the Tarim Basin.

Thermal and exhumation history of the Songnan Low Uplift,Qiongdongnan Basin:constraints from the apatite fission-track and zircon(U-Th)/He thermochronology

Significant advancements have been made in the study of Mesozoic granite buried hills in the Songnan Low Uplift(SNLU)of the Qiongdongnan Basin.These findings indicate that the bedrock buried hills in this basin hold great potential for exploration.Borehole samples taken from the granite buried hills in the SNLU were analyzed using apatite fission track(AFT)and zircon(U-Th)/He data to unravel the thermal history of the basement rock.This information is crucial for understanding the processes of exhumation and alteration that occurred after its formation.Thermal modeling of a sample from the western bulge of the SNLU revealed a prolonged cooling event from the late Mesozoic to the Oligocene period(~80-23.8 Ma),followed by a heating stage from the Miocene epoch until the present(~23.8 Ma to present).In contrast,the sample from the eastern bulge experienced a more complex thermal history.It underwent two cooling stages during the late Mesozoic to late Eocene period(~80-36.4 Ma)and the late Oligocene period(~30-23.8 Ma),interspersed with two heating phases during the late Eocene to early Oligocene period(~36.4-30 Ma)and the Miocene epoch to recent times(~23.8-0 Ma),respectively.The differences in exhumation histories between the western and eastern bulges during the late Eocene to Oligocene period in the SNLU can likely be attributed to differences in fault activity.Unlike typical passive continental margin basins,the SNLU has experienced accelerated subsidence after the rifting phase,which began around 5.2 Ma ago.The possible mechanism for this abnormal post-rifting subsidence may be the decay or movement of the deep thermal source and the rapid cooling of the asthenosphere.Long-term and multi-episodic cooling and exhumation processes play a key role in the alteration of bedrock and contribute to the formation of reservoirs.On the other hand,rapid post-rifting subsidence(sedimentation)promotes the formation of cap rocks.

Prediction model of surrounding rock deformation in doublecontinuous-arch tunnel based on the ABC-WNN

Purpose–The wavelet neural network(WNN)has the drawbacks of slow convergence speed and easy falling into local optima in data prediction.Although the artificial bee colony(ABC)algorithm has strong global optimization ability and fast convergence speed,it also has the drawbacks of slow speed while finding the optimal solution and weak optimization ability in the later stage.Design/methodology/approach–This article uses an ABC algorithm to optimize the WNN and establishes an ABC-WNN analysis model.Based on the example of the Jinan Yuhan underground tunnel project,the deformation of the surrounding rock of the double-arch tunnel crossing the fault fracture zone is predicted and analyzed,and the analysis results are compared with the actual detection amount.Findings–The comparison results show that the predicted values of the ABC-WNN model have a high degree of fitting with the actual engineering data,with a maximum relative error of only 4.73%.On this basis,the results show that the statistical features of ABC-WNN are the lowest,with the errors at 0.566 and 0.573,compared with the single back propagation(BP)neural network model and WNN model.Therefore,it can be derived that the ABC-WNN model has higher prediction accuracy,better computational stability and faster convergence speed for deformation.Originality/value–This article uses firstly the ABC-WNN for the deformation analysis of double-arch tunnels.This attempt laid the foundation for artificial intelligence prediction in deformation analysis of multiarch tunnels and small clearance tunnels.It can provide a new and effective way for deformation prediction in similar projects.

Effects of comprehensive nursing with cognitive behavioral therapy in orthodontic osteodilated arch treatment

BACKGROUND This work explored the effects of cognitive behavior therapy(CBT)-based comprehensive nursing intervention(CNI)mode in arch expansion to treat patients with orthodontic osteodilated arch(OOA).AIM To explore the application effect of CBT-based CNI model in orthodontic expansion arch treatment.METHODS Using convenient sampling method,81 patients with OOA were selected and rolled into a control group(Ctrl group,40 cases)and an observation group(Obs group,41 cases).During the treatment,patients in the Ctrl group received routine nursing intervention mode,and the those in the Obs group received CBT mode on the basis of this.Before and after intervention,the incidence of oral mucositis,the mastery rate of correct arch expansion method,self-rating anxiety scale score,soft scale index,and plaque index were compared for patients in different groups.In addition,satisfaction and complications were comparatively analyzed.RESULTS Incidence of oral mucositis in the Obs group was lower(14.6%vs 38.5%),and the mastery rate of correct arch expansion method was obviously higher(90.2%vs 55.0%)was obviously higher(all P<0.05).Meanwhile,the soft scale index and plaque index in the Obs group were much lower(P<0.05).The compliance(90.24%)and satisfaction(95.12%)in the Obs group were greatly higher(P<0.05).CONCLUSION The CBT-based CNI mode greatly improved the mastery rate of correct arch expansion method during arch expansion in treating patients with OOA and enhanced the therapeutic effect of arch expansion and the oral health of patients,improving the patient compliance.

The Geology, Fluid Inclusions, and O-S Isotopes of the Mibei Gold Deposit, Hunan Province, Southern China

The Mibei gold deposit,located in the southwestern part of the Xuefengshan uplift zone,the middle section of the Jiangnan orogenic belt in southern China,has estimated gold resources of approximately seven tons.This deposit is primarily a quartz vein-type gold deposit,with ore bodies occurring mainly within Neoproterozoic metasediments.The main metallic minerals in the ore are pyrite,chalcopyrite,and arsenopyrite.In this study,the petrography and microthermometry of ore-forming fluid inclusions,oxygen isotopes of gold-bearing quartz,and sulfur isotopes of goldbearing sulfides and arsenopyrite were analyzed.Three types of fluid inclusions were identified:type Ⅰa three-phase inclusions comprising vapor and two phases of liquids(V_(CO_(2))+L_(CO_(2))+L_(H2O)),type Ⅰb two-phase liquids(L_(CO_(2))+L_(H2O)),typeⅡ two-phase vapor-rich inclusions(V/V+L> 50%),and type Ⅲ pure liquid inclusions.Type Ⅰ inclusions were heated uniformly to the liquid phase,type Ⅱ inclusions were heated uniformly to the gas phase,and type Ⅲ inclusions were heated without change.In general,the temperature range of homogenization to liquid phase of fluid inclusions in the Mibei gold deposit is 204-227℃.The salinity of the inclusion ranges from 4.6 to 12.2 wt% NaCl equiv.The δ~(18)O_(SMOW) of gold-bearing quartz varies from 16.9‰ to 17.5‰.The δ~(18)O_(H2O) of gold-bearing quartz are varied from 6.5‰ to 7.5‰.The δ~(34)S values of gold-bearing pyrite range from 1.7‰ to 6.8‰.The δ~(34)S values of gold-bearing arsenopy rite range from 5.6%o to 5.9‰.Theδ~(34)S values of pyrite from wall rocks slate range from 6.4‰ to 11.6‰.This evidence implies that the ore-forming fluids of the Mibei gold deposit originated from magmatic-hydrothermal processes,mixing with minor S from the surrounding metasediments.Combined with the evolution of the Jiangnan orogenic belt,due to the magmatic and tectonic activities of the Xuefengshan uplift during the Caledonian period,the fault seal mechanism controlled the ore-forming process.Overall,the Mibei gold deposit is more akin to a magmatic-hydrothermal gold deposit.

An improved analytical solution for solving the shield tunnel uplift problem

The problem of shield tunnel uplift is a common issue in tunnel construction.Due to the decrease in shear stiffness at the joints between the rings,uplift is typically observed as bending and dislocation deformation at these joints.Existing modeling methods typically rely on the Euler-Bernoulli beam theory,only considering the bending effect while disregarding shear deformation.Furthermore,the constraints on the shield tail are often neglected in existing models.In this study,an improved theoretical model of tunnel floating is proposed.The constraint effect of the shield machine shell on the tunnel structure is considered using the structural forms of two finite long beams and one semi-infinite long beam.Furthermore,the Timoshenko beam theory is adopted,providing a more accurate description of tunnel deformation,including both the bending effect and shear deformation,than existing models.Meanwhile,the buoyancy force and stratum resistance are calculated in a nonlinear manner.A reliable method for calculating the shear stiffness correction factor is proposed to better determination of the calculation parameters.The proposed theoretical model is validated through five cases using sitemonitored data.Its applicability and effectiveness are demonstrated.Furthermore,the influences of soil type,buried depth,and buoyancy force on the three key indicators of tunnel floating(i.e.the maximum uplift magnitude,the ring position with the fastest uplift race,and the ring position with the maximum uplift magnitude)are analyzed.The results indicate that the proposed model can provide a better understanding of the floating characteristics of the tunnel structure during construction.

Structural characteristics and tectonic division of the Zambezi Delta basin in the offshore East Africa:evidences from gravity and seismic data

The Zambezi Delta basin is a passive marginal basin located on the East African coast that has good oil and gas exploration potential.Due to the special geological evolutionary background of the Beira High in the Zambezi Delta basin,it has a low gravity anomaly,and the existing seismic survey lines do not cover the whole basin;therefore,it is difficult to interpret the structural characteristics of the whole basin based solely on gravity or seismic data.Based on satellite altimetry gravity anomaly data,this study infers the distribution characteristics of faults in the Zambezi Delta basin by using the normalized vertical derivative of the total horizontal derivative(NVDR-THDR)technique.Then,constrained by seismic data,the gravity anomaly at the Moho interface is extracted by using the fast forward method of the double-interface model of the gravity anomaly,and this anomaly is then removed from the Bouguer gravity anomaly to obtain the sedimentary layer gravity anomaly.The thickness of the sedimentary strata is obtained by inversing the sedimentary basement depth of the whole basin.Then,uplifts and depressions are divided based on a sedimentary layer thickness of 3 km.This research demonstrates that the Zambezi Delta basin mainly features nearly SN-trending and NE-trending faults and that these faults exhibit east-west partitioning.The nearly SN-trending strike-slip faults controlled the sedimentary development of the basin,and the NE-trending tensile faults may have acted as migration channels for oil,gas and magma.The“overcompensation”effect of the Moho interface gravity anomaly on the gravity anomaly of the sedimentary layer is caused by the depression of the Moho interface beneath the Beira High,which results in a low gravity anomaly value for the Beira High.The pattern of uplifts and depressions trends NE and has the structural characteristics of east-west blocks.

An integrated north–south paleo-Dadu-Anning River: New insights from bulk major and trace element analyses of the Xigeda Formation

The Xianshuihe-Anninghe fault extends SE–S and constitutes the southeastern margin of the Tibetan Plateau.However,the Dadu River which is associated with the fault does not flow following the path,but makes a 90ºturn within a distance of 1 km at Shimian,heading east,and joins the Yangtze River,finally flowing into the East China Sea.Adjacent to the abrupt turn,a low and wide pass near the Daqiao reservoir at Mianning separates the N–S course of the Dadu River from the headwater of the Anning River which then flows south into the Yunnan Province along the Anninghe fault.Therefore,many previous studies assumed southward flow of the paleo-Dadu River from the Shimian to the Anning River.However,evidences for the capture of the integrated N–S paleo-Dadu-Anning River,its timing,and causes are still insufficient.This study explored the paleo-drainage pattern of the Dadu and Anning Rivers based on bulk mineral and geochemical analyses of the large quantities of fluvial/lacustrine sediments along the trunk of the Dadu and Anning Rivers.Similar with sands in the modern Dadu River,the Xigeda sediments also exhibit a granitoid affinity with the bulk major mineral compositions of quartz(>50%),anorthite(about 10%),orthoclase(about 5%),muscovite(about 5%),and clinochlore(about 4%).Correspondingly,bulk major elements show high SiO_(2),with all samples>60%,and some of them>70%,low TiO_(2)(≤0.75%),P_(2)O_(5)(≤0.55%),FeO*(≤5%),and relatively high CaO(1.02%–8.51%),Na_(2)O(1.60%–2.52%),and K_(2)O(2.17%–2.71%),with a uniform REE patterns.Therefore,synthesizing all these results indicate that these lacustrine sediments have similar material sources,which are mainly derived from its course in the Songpan-Ganzi flysch block,implying that the paleo-Dadu originally flowed southward into the Anning River and provided materials to the Xigeda ancient lake.The rearrangement of the paleo-Dadu River appears to be closely related to the locally focused uplift driven by strong activities of the XianshuiheXiaojiang fault system.

Exploring the rules of cropland elevation uplift in China

Cropland elevation uplift(CLEU) has recently become a new challenge for agricultural modernization,food security,and sustainable cropland use in China.Uncovering the rules of CLEU is of great theoretical and practical significance for China’s sustainable agricultural development and rural revitalization strategy.However,existing studies lack in-depth disclosure of multi-scale CLEU evolution rules,making it difficult to support the formulation of specific cropland protection policies.We analyzed the spatio-temporal evolution and multiscale CLEU in China from 1980 to 2020 using the Lorenz curve,gravity center model,hotspot analysis,and cropland elevation spectrum.The results indicated that the center of gravity of cropland moved to the northeast from 1980 to 2000 and then shifted to the northwest.The spatial distribution of cropland became increasingly imbalanced from 1980 to 2000.The change hotspots clustered in the northwest and the northeast,whereas cold-spots were mainly in southeastern China.The average elevation of cropland increased by 17.38 m,and the elevation uplift rule in different regions differed evidently across scales.From 1980 to 2000,all provinces except Xinjiang,Inner Mongolia,Gansu,and Yunnan exhibited CLEU,with Qinghai,Tibet,Beijing,and Guangdong showing the most noticeable uplifting.The CLEU can alleviate the shortage of cropland to some extent.However,without a planning constraint,the CLEU will lead to the increase of ecological risk and food security risk.

Texture development of mesophase in reservoir pyrobitumen and the temperature-pressure converting of the gas reservoir in the Chuanzhong Uplift, Southwestern China

The Neoproterozoic-Lower Paleozoic dolostone gas reservoirs in the Chuanzhong Uplift in Southwestern China contain the mesophase pyrobitumen (pyrobitumen with mesophase). The mesophase in the pyrobitumen is mostly composed of a mixture of condensed macromolecule polycyclic aromatic hydrocarbons (PAH), and has been mostly converted to various grain, flow, and domain textures. The volcanic activity nearby the Chuanzhong Uplift may have generated very hot (over 300 °C) hydrothermal fluid, with migration of the fluid into the dolostone reservoir transforming the hydrocarbons in the reservoir into an anisotropic carbon by-product, which formed under high temperature and pressure conditions;over 300 °C and 200 MPa according to fluid inclusion analysis. The high temperature-pressure in reservoir was caused by sudden devolatilization of the hydrocarbons due to hydrothermal heating, which formed the unusual texture of the mesophase. The elliptical mesophase grains (EG), the honeycomb structure of pyrobitumen, and the occurrence of polarized classes of mesophase in single pyrobitumen deposits are all unusual textures. This study investigates the texture development of this pressure-affected pyrobitumen. Observation and study of the mesophase suggest that the class of mesophase in pyrobitumen is determined by temperature, while pressure (assessed from associated fluid inclusions) significantly affected the texture. Analysis of the texture of the pyrobitumen in conjunction with previous thermometry results from methane inclusions suggests that the high class mesophase of the pyrobitumen could be applied as a temperature indicator for geological conditions. Furthermore, the unusual textures of the pyrobitumen including elliptical mesophase grains (EG), the honeycomb structure of pyrobitumen, and the occurrence of polarized classes of mesophase in single pyrobitumen could reflect the abnormal high formation pressure.

An Orthogonal Collision Dynamic Mechanism of Wave-Like Uplift Plateaus in Southern Asia

In southern Asia, there are three large-scale wave-like mountains ranging from the Tibetan Plateau westward to the Iranian Plateau and the Armenian Plateau. On the southern side between plateaus, there are the Indian Peninsula and the Arabian Peninsula. What dynamic mechanisms form the directional alignment of the three plateaus with the two peninsulas remains a mystery. In the early stages of the Earth’s geological evolution, the internal structure of the Earth was that the center was a solid core, and the outmost layer was a thin equatorial crust zone separated by two thick pristine continents in polar areas, while the middle part was a deep magma fluid layer. Within the magma fluid layer, thermal and dynamic differences triggered planetary-scale vertical magma cells and led to the core-magma angular momentum exchange. When the core loses angular momentum and the magma layer gains angular momentum, the movement of upper magma fluids to the east and the tropical convergence zone (TCZ) drives the split and drift of two thick pristine continents, eventually forming the current combination of these plateaus and peninsulas and their wave-like arrangement along the east-west direction. Among them, the horizontal orthogonal convergence (collision) of upper magma fluids from the two hemispheres excited the vertical shear stress along the magma TCZ, which is the dynamic mechanism of mountain uplifts on the north side and plate subductions on the south side. To confirm this mechanism, two examples of low-level winds are used to calculate the correspondence between cyclone/anticyclonic systems generated by the orthogonal collision of airflows along the atmospheric TCZ and satellite-observed cloud systems. Such comparison can help us revisit the geological history of continental drift and orogeny.

Predictive value of the trans-perineal three-dimensional ultrasound measurement of the pubic arch angle for vaginal delivery

BACKGROUND Numerous variables are linked to the success of vaginal delivery,including the subpubic arch angle(SPAA)during labor,the importance of which has not yet been fully elucidated.AIM To examine the SPAA distributional characteristics and to ascertain SPAA’s ability to predict the type and duration of labor.METHODS We determined the SPAA and analyzed the corresponding data.We also evaluated the relationship between the SPAA and the mode of delivery and the duration of labor by regression.The present study comprised a total of 301 pregnant women who had given birth at Beijing Tiantan Hospital of the Capital Medical University between January and December of 2021.RESULTS Our analysis of 301 pregnant women revealed that the SPAA measured using three-dimensional trans-perineal ultrasound had a minimum angle of 81°and a maximum angle of 122.2°.The angle in the normal vaginal delivery group was greater than that in the labor cesarean group(P=0.000).The SPAA was a highly significant positive predictor of normal vaginal delivery(P=0.000)with an area under the curve of 0.782(P=0.000;95%CI:0.717-0.848).We found the length of the second stage of labor to be positively influenced by the SPAA using linear regression analysis(P=0.045).CONCLUSION The SPAA was a highly significant positive predictor of normal vaginal delivery.The length of the second stage of labor and normal vaginal birth were predicted by SPAA.

Geochemical characteristics of Sr isotopes in the LS33 drill core from the Qiongdongnan Basin, South China Sea, and their response to the uplift of the Tibetan Plateau

Making full use of modern analytical and testing techniques to explore and establish new indexes or methods for extracting paleoseawater geochemical information from sediments will help to reconstruct the sedimentary paleoenvironment in different research areas.The connection between the subsidence of the South China Sea basin and the uplift of the Tibetan Plateau has been a scientific concern in recent decades.To explore the information on the sedimentary paleoenvironment,provenance changes and uplift of Tibetan Plateau contained in core sediments(debris),we selected core samples from Well LS33 in the Qiongdongnan Basin,South China Sea,and analyzed the contents of typical elements(Al,Th,and rare earth elements)that can indicate changes in provenance and the Sr isotopic compositions,which can reveal the geochemical characteristics of the paleoseawater depending on the type of material(authigenic carbonate and terrigenous detritus).The results show the following:(1)during the late Miocene,the Red River transported a large amount of detrital sediments from the ancient continental block(South China)to the Qiongdongnan Basin.(2)The authigenic carbonates accurately record changes in the 87Sr/86Sr ratios in the South China Sea since the Oligocene.These ratios reflect the semi-closed marginal sea environment of the South China Sea(relative to the ocean)and the sedimentary paleoenvironment evolution process of the deep-water area of the Qiongdongnan Basin from continental to transitional and then to bathyal.(3)Since the Neogene,the variations in the 87Sr/86Sr ratio in the authigenic carbonates have been consistent with the variations in the uplift rate of the Tibetan Plateau and the sediment accumulation rate in the Qiongdongnan Basin.These consistent changes indicate the complex geological process of the change in the rock weathering intensity and terrigenous Sr flux caused by changes in the uplift rate of the Tibetan Plateau,which influence the Sr isotope composition of seawater.

Wave Uplift Forces on the Bottom of a Circular Cylinder

The analysis of the data of model tests of two large deep wharves and monographic experimental studies show that two aspects are to be improved so as to predict the wave uplift forces on the bottom of a circular cylinder. The first aspect is the uplift pressure distribution on the bottom, and the second is the correct determination of the phase for maximum horizontal wave forces. The second problem has been solved. Synthesizing the results of theoretical analysis and experiments, we suggest a diagram for the determination of the phase when the maximum horizontal wave force appears. On the basis-ef the diagram the simultaneous wave uplift forces can be obtained for the structural stability analysis.

Research of the Differential Uplifting in the Palongzangbu Region Based on the Synthesis of the Watershed Index and Seismic Data

Research on the differential uplifting in the Palongzangbu region is crucial to understanding the tectonic deformation mechanism and establishing the model of the faulted blocks in the region of the east structural knot.In this paper,based on the ASTER-30m DEM,we calculate the hypsometry index(HI)of 19 watersheds in the Palongzangbu region,and study the differential uplifting in this region combining with seismic data,the ground deposition and erosion process.The result shows that the spatial distribution of the HI value can reflect the differential uplifting in the study area.Differential uplifting exists within different zones,and there are 2 relative strong uplifting centers.One center is near the east structural knot,and the other lies between the Lhari fault and Nujiang fault at their converging segment.Also,the watershed evolution,seismic activity,and ground deposition and erosion process are closely related to each other,and they constitute a chain of evidence which reveals the whole process from the tectonic movement underground to the landform evolution on the surface.

The Research on Wooden Arched Bridges and Traditional Villages' Environmental Image in East Fujian Province of China——A Case Study of Youxi Ancient Village in Shouning County of East Fujian

By taking Youxi Village which was the typical village with wooden arched bridges in East Fujian for example, it had discussed landforms, geology, soil, climate and vegetation in natural environment which could be perceived and village's cultural and historical background. Based on relevant research results in academic field, it had studied the relationship between wooden arched bridges and villages' environment in East Fujian, and further analyzed the relation of wooden arched bridges as traditional architectural heritages with village's living condition and history. On this basis, it had analyzed imaginability of natural environment of Youxi Village from the aspects of village's site and stream's trend, and imaginability of cultural environment by taking Wenming Bridge, Liren Bridge and Zhangkeng Bridge for example. It was considered that wooden arched bridge was the consolidation of natural environment and had been the recognizable image at villages of East Fujian, manifesting heavy cultural characteristic.

Numerical Simulation Analysis of Welded Joints in Arch Ribs of Large Span Steel Pipe Arch Bridges

In order to study the residual stress distribution law of welded joints of arch ribs of large-span steel pipe concrete arch bridges,numerical simulation of temperature,stress and strain fields based on ABAQUS for welded joints of arch-ribbed steel tubes using 7-,8-and 9-layer welds is carried out and its accuracy is demonstrated.The steel pipe welding temperature changes,residual stress distribution,different processes residual stress changes in the law,the prediction of post-weld residual stress distribution and deformation are studied in this paper.The results show that the temperature field values and test results are more consistent with the accuracy of numerical simulation of welding,the welding process is mainly in the form of heat transfer;Residual high stresses are predominantly distributed in the Fusion zone(FZ)and Heat-affected zone(HAZ),with residual stress levels tending to decrease from the center of the weld along the axial path,the maximum stress appears in the FZ and HAZ junction;The number of welding layers has an effect on the residual stress distribution,the number of welding layers increases,the residual stress tends to decrease,while the FZ and HAZ high stress area range shrinks;Increasing the number of plies will increase the amount of residual distortion.

Health diagnosis of ultrahigh arch dam performance using heterogeneous spatial panel vector model

Currently,more than ten ultrahigh arch dams have been constructed or are being constructed in China.Safety control is essential to long-term operation of these dams.This study employed the flexibility coefficient and plastic complementary energy norm to assess the structural safety of arch dams.A comprehensive analysis was conducted,focusing on differences among conventional methods in characterizing the structural behavior of the Xiaowan arch dam in China.Subsequently,the spatiotemporal characteristics of the measured performance of the Xiaowan dam were explored,including periodicity,convergence,and time-effect characteristics.These findings revealed the governing mechanism of main factors.Furthermore,a heterogeneous spatial panel vector model was developed,considering both common factors and specific factors affecting the safety and performance of arch dams.This model aims to comprehensively illustrate spatial heterogeneity between the entire structure and local regions,introducing a specific effect quantity to characterize local deformation differences.Ultimately,the proposed model was applied to the Xiaowan arch dam,accurately quantifying the spatiotemporal heterogeneity of dam performance.Additionally,the spatiotemporal distri-bution characteristics of environmental load effects on different parts of the dam were reasonably interpreted.Validation of the model prediction enhances its credibility,leading to the formulation of health diagnosis criteria for future long-term operation of the Xiaowan dam.The findings not only enhance the predictive ability and timely control of ultrahigh arch dams'performance but also provide a crucial basis for assessing the effectiveness of engineering treatment measures.

A Nonlinear Explicit Model of A Non-Circular Subsea Tunnel-Liner System with An FGM Inverted Arch Under Mechanical Loading and Fire Fields

This paper proposes an explicit scheme to analyze the failure of a subsea polyhedral tunnel-liner system with an inverted arch under mechanical loading and fire fields.The thin-walled liner is made of Functionally Graded Materials(FGMs),which may improve the stability behavior of the tunnel-liner system.Hydrostatic pressure is inevitable in the liner since underground water may penetrate the cracks of the tunnel,and reach the outer surface of the liner.In addition,an elevated temperature loading is taken into account,considering that fire may occur in the tunnel-liner system.Under the combination of mechanical loading and thermal loading,the liner deforms into a single-lobe shape,which is depicted by a trigonometric function.The total potential energy is expressed quantitatively after the energy approach and thin-walled shell theory are used.The minimum potential energy is obtained when the critical buckling occurs.The critical buckling pressure is calculated,which considers the effect of the thermal field.The present analytical prediction is subsequently compared precisely with other closed-form solutions.Finally,the effects of several parameters,such as the geometric shapes,temperature variations,and volume fraction indices,are discussed to further survey the buckling performance of the nonlinear buckling of an FGM polyhedral liner with an inverted arch.One may address a polyhedral liner with fewer polyhedral sides,and a lower volume fraction index is recommended to rehabilitate cracked tunnels in engineering applications.