Causes of the Extreme Hot Midsummer in Central and South China during 2017:Role of the Western Tropical Pacific Warming

This study investigates why an extreme hot midsummer occurred in Central and South China(CSC) during 2017. It is shown that the western North Pacific subtropical high(WNPSH) was abnormally intensified and westward-extending,resulting in anomalous high pressure and consequent extreme heat over CSC. The abnormal WNPSH was favored by the warming of the western tropical Pacific(WTP), which was unrelated to ENSO and manifested its own individual effect.The WTP warming enhanced the convection in-situ and led to anomalous high pressure over CSC via a local meridional circulation. The influence of the WTP was confirmed by CAM4 model experiments. A comparison between the 2017 midsummer and 2010 midsummer(with a stronger WNPSH but weaker extreme heat) indicated that the influence of the WNPSH on extreme heat can be modulated by the associated precipitation in the northwestern flank.The role of the WTP was verified by regression analyses on the interannual variation of the WTP sea surface temperature anomaly(SSTA). On the other hand, the WTP has undergone prominent warming during the past few decades, resulting from decadal to long-term changes and favoring extreme warm conditions. Through a mechanism similar to the interannual variation, the decadal to long-term changes have reinforced the influence of WTP warming on the temperature over CSC,contributing to the more frequent hot midsummers recently. It is estimated that more than 50% of the temperature anomaly over CSC in the 2017 midsummer was due to the WTP warming, and 40% was related to the decadal to long-term changes of the WTP SSTA.

Petrogenesis and Tectonics of the Naruo Porphyry Cu(Au) Deposit Related Intrusion in the Duolong Area,Central Tibet

The Duolong area is the most important part of the Western Bangong-Nujiang Suture Zone porphyry Cu（Au） metallogenic belt, in Tibet, China. Here new detailed data are presented from LAICP-MS zircon U-Pb, whole-rock geochemical, and in-situ zircon Hf isotope analyses for igneous rocks in the large Naruo deposit（2.51 Mt of Cu and 82 t of Au） which is located ~2 km NE of the Duolong（Duobuza and Bolong） super-large gold-rich porphyry copper deposit. We integrated our results with previous research of other porphyry deposits in the Duolong area and have identified the timing, geodynamic setting, and petrogenesis of the mineralization-associated magmatic events. Based on the measurements, the Duolong area porphyry Cu（Au） deposit formations are associated with Early Cretaceous intermediate-felsic magmatism, which is consistent with U-Pb zircon ages of 120 Ma. All the main intrusive rocks in the ore-concentrated area have similar lithogeochemical characteristics; they show a relative enrichment in both light rare earth elements（LREEs） and large-ion lithophile elements（LILEs： Rb, Ba, K, etc.） and relative depletion in both heavy rare earth elements（HREEs） and high field strength elements（HFSEs： Nb, Ta, Zr, Hf, etc.）. Moreover, the granite porphyry shows positive εHf（t） values between 1.38–7.37 suggesting that magmas were potentially derived from the partial melting of a depleted mantle wedge that had been metasomatized by subducted slab-derived fluids or melts. This paper points out that the formation of the porphyry-epithermal Cu（Au） deposit in the Duolong area was dominated by northward subduction of the Bangongco Tethys Plate beneath the Qiangtang block in the Early Cretaceous（124–114 Ma）, when the subducted oceanic crust reached 50–70 km underground and generated different degrees of phase transformation, which lead to a melt produced by dehydration of amphibole minerals, a metasomatized mantle wedge, and induced mantle partial melting that produced the magma. Those deposits occurred in a continental arc tectonic setting, which is similar to the continental margin arc environment of the ocean-continent subduction setting of the Andes metallogenic belt in South America.

Significant progress of continental petroleum geological theory in basins of Central and Western China

China's continental oil and gas geological theory occupies an important academic position in the world's academic circle of petroleum geology. China's oil and gas resources are dominated by continental resources. Chinese geologists have successfully explored and developed complex continental oil and gas, and developed a continental oil and gas geological theory system. This paper summarizes the development history and theoretical achievements of continental oil and gas geological theory since the 1940 s and proposes that the development of this theory should be divided into three stages(i.e., proposal, formation and development). The China's continental oil and gas geological theory has formed a basically perfect theoretical system consisting of five parts, i.e., continental basin structure theory, continental basin sediments and reservoirs theory, continental oil generation theory, continental oil and gas accumulation theory, and continental sandstone oil and gas field development geology. As an advanced geological theory, it has a universal significance globally. This paper focuses on the major discoveries of oil and gas exploration and development and the production growth in the basins of the Central and Western China in the past 30 years as well as the major advances in the continental oil and gas geological theory, including the continental basin tectonics of Central and Western China under the compression background, special reservoir geology such as various types of lake basin sedimentary systems and deep conglomerate, new fields of continental hydrocarbon generation such as coal-generated hydrocarbons, continental oil and gas enrichment regularity such as foreland thrust belts and lithologic-stratigraphic reservoirs, continental unconventional oil and gas geology and continental low-permeability oil and gas development geology. These major advances have greatly developed and enriched the continental oil and gas geological theory and become an important part of it.

Discovery of the Dagele Eclogite in East Kunlun,Western China and Its Zircon SHRIMP U-Pb Ages:New Constrains on the Central Kunlun Suture Zone

Objective Eclogites are important indicators of ancient plate boundaries or paleosuture zones. Despite their great geological significance, very few investigations have been carried out in the Kunlun region. The Central East Kunlun fault zone was believed to be an Early Paleozoic suture zone, but there has been no reliable evidence for this, though studies on ophiolite, granite, and basic granulite indicate that the Early Paleozoic orogeny occurred in the East Kunlun. This work focused on the Dagele eclogites in Central East Kunlun to provide new constraints for the Central East Kunlun suture zone.

Sedimentology and Chronology of Paleogene Coarse Clastic Rocks in East-Central Tibet and Their Relationship to Early Tectonic Uplift

A systematic sedimentological and chronological study of typical Paleogene basins in eastcentral Tibet suggests that the depositional characteristics of extensively developed huge-bedded, purplish-red coarse clastic rocks formed in a tectonic setting of regional thrusting and strike-slipping represent a typical dry and hot subaerial alluvial fan environment formed in a proximal and rapidaccumulating sediment body in debris flows and a fan-surface braided river. Combining results from basin-fill sequences, sequences of coarse clastic rocks, fauna and sporo-pollen associations and thermochronological data, it is conduded that the coarse clastic rocks formed in the period of 54.2- 24.1 Ma, nearly coeval with the formation of Paleogene basins in the northern （Nangqen-Yushu thrust belt）, middle （Batang-Lijiang fault belt）, and disintegration of large basins in the southern （LanpingSimao fold belt） segments of Tibet. The widespread massive-bedded coarse clastic rocks, fold thrusting and strike-slip, thrust shortening, and igneous activities in the Paleogene basins of eastcentral Tibet indicate that an early diachronous tectonic uplift might have occurred in the Tibetan Plateau from Middle Eocene to Oligocene, related to the initial stage of collision of the Indian and Asian plates.

The Spatial-Temporal Distribution Patterns of Dyke Swarms in Central Asia and their Tectonic Significance: Case Studies in Eastern Tianshan and Western Junggar

Dykes are a special kind of intrusive rocks which were formed by deep magma intruded into the existing brittle fractures in the crust.Dykes swarms in different tectonic environments are very significant to re-construct the

Research of the Conductive Structure of Crust and the Upper Mantle beneath the South-Central Tibetan Plateau

With the super-wide band magnetoteiluric sounding data of the JUong （吉隆）-Cuoqin （措勤） profile （named line 800） which was completed in 2001 and the Dingri （定日）-Cuomai （措迈） profile （named line 900） which was completed in 2004, we obtained the strike direction of each MT station by strike analysis, then traced profiles that were perpendicular to the main strike direction, and finally obtained the resistivity model of each profile by nonlinear conjugate gradients （NLCG） inversion. With these two models, we described the resistivity structure features of the crust and the upper mantle of the center-southern Tibetan plateau and its relationship with Yalung Tsangpo suture： the upper crust of the research area is a resistive layer with resistivity value range of 200-3 000 Ω.m. The depth of its bottom surface is about 15-20 km generally, but the bottom surface of resistive layer is deeper in the middle of these two profiles. At llne 900, it is about 30 km deep, and even at line 800, it is about 38 km deep. There is a gradient belt of resistivity at the depth of 15-45 km, and a conductive layer is beneath it with resistivity even less than 5 Ω.m. This conductive layer is composed of individual conductive bodies, and at the south of the Yalung Tsangpo suture, the conductive bodies are smaller with thickness about 10 km and lean to the north slightly. However, at the north of the Yalung Tsangpo suture, the conductive bodies are larger with thickness about 30 km and also lean to the north slightly. Relatively, the conductive bodies of line 900 are thinner than those of line 800, and the depth of the bottom surface of line 900 is also shallower. At last, after analyzing the effect factors to the resistivity of rocks, it was concluded that the very conductive layer was caused by partial melt or connective water in rocks. It suggests that the middle and lower crust of the center-southern Tibetan plateau is very thick, hot, flabby, and waxy.

The Relationship Between Fat Content and Biological Parameters of Bigeye Tuna(Thunnus obseus) in the Western Central Indian Ocean

Comparing fat content with physiological status can throw light on the reproduction and feeding behavior of the fish. The biological data of 586 bigeye tuna were collected from the longline fishery in the waters of Western Central Indian Ocean from November, 2012 to March, 2013. The spatial or temporal distribution of the fat content, and the relationships of fat content with gender, round weight, gonadal maturity and fork length were analyzed. A generalized additive model(GAM) was used to analyze the relationships between fat content and fork length(FL), gonadosomatic index(GSI), condition factor(K), and somatic index(SI). Results showed that: 1) the fat content of bigeye tuna was in the range of 3.1%–27.1% with the average 12.8%; 2) there were no significant geographical differences of average fat content(P > 0.05) among 1? squares in general; 3) there were no significant differences(P > 0.05) of the fat content for different genders, months, or gonad maturity stages; 4) there was an extremely significant correlation(P = 0.000) between fat content and FL and GSI. There was no significant correlation(P = 0.051) between fat content and K. There was a significant correlation(P = 0.003) between fat content and SI. The results of this study suggest that the fat content of the matured fish was relatively stable. The survey area was in a spawning region, and the survey period was the spawning season for bigeye tuna.

Petrogenesis of Triassic Mafic Complexes with MORB/OIB Affinities from the Western Garzê-Litang Ophiolitic Mélange, Central Tibetan Plateau

There is a general consensus that most ophiolites formed above subduction zones(Pearce,2003),particularly during forearc extension at subduction initiation(Shervais,2001;Stern,2004;Whattam and Stern,2011).'Supra-Subduction zone'(SSZ)ophiolites such as the well-studied Tethyan ophiolites,generally display a characteristic sequential evolution from mid-oceanic ridge basalts(MORBs)to island arc tholeiities(IATs)or bonites(BONs)(Pearce,2003;Dilek and Furnes,2009,2011),which were generated in sequence from the decompression melting of asthenospheric mantle and partial melting of subduction-metasomatized depleted mantle(Stern and Bloomer,1992;Dilek and Furnes,2009;Whattam and Stern,2011).However,ophiolites with MORB and/or oceanic-island basalt(OIB)affinities are rare,and their origin and tectonic nature are poorly understood(Boedo et al.,2013;Saccani et al.,2013).It is interesting that the composition of these ophiolites from the central Tibetan Plateau(CTP)is dominated by MORBs and minor OIBs and a distinct lack of IATs and BONs,which is inconsistent with most ophiolites worldwide(Robinson and Zhou,2008;Zhang et al.,2008).But the generation and tectonic nature of these ophiolites are still controversial.*In this study,we present new geochronological,mineralogical and Sr-Nd isotopic data for the Chayong and Xiewu mafic complexes in the western Garzê-Litang suture zone(GLS),a typical Paleo-Tethyan suture crossing the CTP(Fig.1).The Triassic ophiolite in the western GLS has been described by Li et al.(2009),who foundthat it mainly consists of gabbros,diabases,pillow basalts and a few metamorphic peridotites.The ophiolite has been tectonically dismembered and crops out in Triassic clastic rocks and limestones as tectonic blocks.The Chayong and Xiewu mafic complexes are generally regarded as important fragments of the Triassic ophiolites(e.g.,Jin,2006;Li et al.,2009).Zircon LA-ICP-MS U-Pb ages of234±3 Ma and 236±2 Ma can be interpreted as formation times of the Chayong and Xiewu mafic complexes,respectively.The basalts and gabbros of the Chayong complexexhibitenrichedMORB(E-MORB)compositional affinities except for a weak depletion of Nb,Ta and Ti relative to the primitive mantle,whereas the basalts and gabbros of the Xiewu complex display distinct E-MORB and OIB affinities.The geochemical features suggest a probable fractionation of olivine±clinopyroxene±plagioclase as well as insignificant crustal contamination.The geochemical and Sr-Nd isotopic data reveal that the Chayong mafic rocks may have been derived from depleted MORB-type mantle metasomatized by crustal components and Xiewu mafic rocks from enriched lithosphericmantlemetasomatizedbyOIB-like components.The ratios of Zn/Fet,La/Yb and Sm/Yb indicate that these mafic melts were produced by the partial melting of garnet+minor spinel-bearing peridotite or spinel±minor garnet-bearing peridotite.We propose thatback-arcbasinspreadingassociated with OIB/seamount recycling had occurred in the western GLS at least since the Middle Triassic times,and the decompression melting of the depleted MORB-type asthenospheremantleandpartialmeltingof sub-continental lithosphere were metasomatized by plume-related melts,such as OIBs,which led to the generation of the Chayong and Xiewu mafic melts.

Formation of overpressure system and its relationship with the distribution of large gas fields in typical foreland basins in central and western China

Based on the data of measured formation pressure, drilling fluid density of key exploration wells and calculated pressure by well logging, combined with the analysis of natural gas geological conditions, the characteristics and formation mechanisms of formation fluid overpressure systems in different foreland basins and the relationship between overpressure systems and large-scale gas accumulation are discussed.(1) The formation mechanisms of formation overpressure in different foreland basins are different. The formation mechanism of overpressure in the Kuqa foreland basin is mainly the overpressure sealing of plastic salt gypsum layer and hydrocarbon generation pressurization in deep–ultra-deep layers, that in the southern Junggar foreland basin is mainly hydrocarbon generation pressurization and under-compaction sealing, and that in the western Sichuan foreland basin is mainly hydrocarbon generation pressurization and paleo-fluid overpressure residual.(2) There are three common characteristics in foreland basins, i.e. superimposed development of multi-type overpressure and multi-layer overpressure, strong–extremely strong overpressure developed in a closed foreland thrust belt, and strong–extremely strong overpressure developed in a deep foreland uplift area.(3) There are four regional overpressure sealing and storage mechanisms, which play an important role in controlling large gas fields, such as the overpressure of plastic salt gypsum layer, the overpressure formed by hydrocarbon generation pressurization, the residual overpressure after Himalayan uplift and denudation, and the under-compaction overpressure.(4) Regional overpressure is an important guarantee for forming large gas fields, the sufficient gas source, large-scale reservoir and trap development in overpressure system are the basic conditions for forming large gas fields, and the overpressure system is conducive to forming deep to ultra-deep large gas fields.

The Key Influence of Fluid in the Preserves, Mineral Assemblages, Compositionsand Structures: Study from High-Pressure Eclogite and Its Amphibolization in the Western Dabie Mountains,Central China

Pseudosection modeling for the garnet amphibolite samples from the Western Dabie Mountains show they have experienced similar HP metamorphic evolution with that of the adjected eclogites.The common assemblage of

The Key Influence of Fluid in Metamorphic Rock Preserves, Mineral Assemblages, Compositions and Structures: Study from High-Pressure Eclogite and Its Amphibolization in the Western Dabie Mountains,Central China

The most of high/ultrahigh-pressure(HP/UHP)terranes of the world are characterized by the occurrence of numerous pods,lenses or layered blocks of eclogite and amphibolites(e.g.O’Brien,1997;Elvevold and Gilotti,2000;Zhang et al.,2003;and references there in).Field and petrological features suggest that amphibolites should

Eurasia Continental Bridge——An Important Link of the Coordinated Development between China's Eastern,Central and Western Regions

The new Eurasia Continental Bridgeruns from East China to Central andWest China, crossing 11 provincesand regions, namely Jiangsu, Shandong,Hubei, Anhui, Shaanxi, Gansu, Shanxi,Sichuan, Qinghai, Xinjiang and Ningxia.The total area is 3.6 million sq km and thepopulation is about 300 million, accountingfor a third and a quarter of the whole countryrespectively. The area is very rich in naturalresources, so it is called an "Economic goldbelt" and "Gold corridor". Aerial remote-control survey indicates that along thecontinental bridge from Lianyungang to theAla Mountains within China’s boundary,

Generation and Disruption of Subducted Lithosphere in the Central-Western Mediterranean Region and Time-Space Distribution of Magmatic Activity Since the Late Miocene

The long migration of the Balearic Arc (Alpine-Apennine and Alpine-Maghrebian belts) in the Early-Middle Miocene caused the formation of a subducted lithospheric edifice in the western and central Mediterranean regions. Then, since the Late Miocene, this slab was almost completely disrupted, only maintaining a narrow and deformed remnant beneath the southernmost Tyrrhenian basin. This work describes a tentative reconstruction of the tectonic processes that caused the formation of major tears and breakoffs in the original slabs and the consequent disruption of the subducted lithosphere. In particular, it is suggested that this relatively fast process was produced by the collision between the Anatolian-Aegean system and the continental Adriatic domain, which triggered a number of extrusion processes. Possible connections between the proposed tectonic evolution and the spatio-temporal distribution and geochemical signatures of magmatic activity are then discussed. It is supposed that such activity has been mainly conditioned by the occurrence of transtensional tectonics in the wake of escaping orogenic wedges.

The first discovery of Xinlong epithermal gold deposit in southern margin of the Bangonghu-Nujiang metallogenic belt: A new expansion of gold prospecting in Northern Tibet

The Xinlong gold deposit is located in Niyma County,Naqu area of Tibet and was discovered by the Institute of Mineral Resources,Chinese Academy of Geological Sciences through the 1∶50000 mineral geological survey.The ore bodies occur in the Zenong Group volcanic rocks in the middle section of the central Lhasa subterrane and are structurally controlled by the NNW-striking faults.Four ore bodies have been found,exhibiting cloddy,dense-sparse,disseminated,and breccia structures.The ore minerals are mainly tetrahedrite group minerals,and other ore minerals include pyrite,chalcopyrite,nevskite,bornite,anglesite,native gold,and silver-gold bearing selenide,etc.The types of alteration are dominated by silicification,as well as middle-and high-graded argillization.The alteration mineral assemblages contain quzrtz,pyrophyllite,and kaolinite.The Zaliela Formation volcanic rocks of Zenong Group are silicified by later hydrothermal fluid with vuggy quartz in some fractured zones.The middle-and high-graded argillization are characterized by pyrophyllitization and kaolinization.The Xinlong gold deposit shows great metallogenetic potentiality and has been revealed by 1∶10000 geological mapping,IP sounding,and trial trenching in the mining area.Combined with the regional metallogenic geological setting,we suppose that a potential epithermal gold belt probably exists in the middle of the Lhasa terrane.The discovery of the Xinlong gold deposit opens a new chapter for the gold prospecting in Northern Tibet.

UPLIFT AND DENUDATION AT SOUTHEAST MARGIN OF TIBET PLATEAU IN QUATERNARY

The southeast margin of Tibet plateau mainly consists of the Western Yunnan plateau (WYP). The uplift and denudation at the southeast margin of Tibet plateau can be represented by that of the WYP. Based on the uplift of ancient plantain surface, river terrace and sedimentary response in peripheral basins of the WYP, suggest that the WYP experienced a rapid uplift and denudation in Quaternary. The WYP have been uplifted about 610～700m, and eroded away about 1095～1600m since Quaternary, average denudation rate reach 0 68～0 94mm/a. Uplift rates in different time interval were calculated according to river terrace. Relations between WYP and Tibetan plateau are discussed further..The Yinggehai basin located at the south termination of the Red River fault, it is the younger (mainly Neogene) pull\|apart basin, which developed at releasing bend of the Red River right\|lateral wrench fault. Since the Neogene, the subsidence center of the Yinggehai basin shifted southward and, connected with the Southeast Hainan basin. Both basins collected large amounts of the Holocene and Quaternary deposits of marine origin. They are peripheral marine basin of the WYP.. Silicate clastic sediments in both basins have been large supported from the WYP into both basins through the Red River system. The total volumes derived from the WYP in the Neogene and Quaternary is 2 8004×10 14 t(1 and 5 1206×10 14 t. The sedimentation rate in Yinggehai basin rose from 0 52mm/a in the Neogene to 1 39mm/a in the Quaternary. The facts that accumulation volume and sedimentation rate rose greatly after the Neogene, suggested a rapid uplift in the WYP. The rapid uplift was responsible for the unconformity between the Neogene and Quaternary. Elevation of ancient planation surface,and river terrace supported the rapid uplift of the WYP also. The ancient planation surface was elevated from 2500～2600m to 3000～3200m during Quaternary, seven terraces in Tue can be traced through the field area in elevation from 20 5m to 612m above the modern river surface in the Lancang River. The Jinsha River also incised into bed rocks about 700m in Shigu. All the facts suggest that southeast margin of Tibet plateau rose rapidly; the plateau was elevated about 610～700m in the Quaternary.

Permo-Triassic high-pressure metamorphism in the central western Korean Peninsula, and its link to Paleo-Tethyan Ocean closure: Key issues revisited

Permo-Triassic high-pressure(HP) mafic granulites, together with the Bibong retrogressed eclogite,preserved along the central western Korean Peninsula provide important insights into the Late Permian to Triassic collisional orogeny in northeast Asia. The metamorphic pressureetemperatureetime(P-T-t)paths of these rocks, however, remain poorly constrained and even overestimated, owing to outdated geothermobarometers and inaccurate isopleth techniques. Here we evaluate the metamorphic Pe T conditions of Triassic HP mafic granulites including those in Baekdong, Sinri and Daepan and the Bibong Triassic retrogressed eclogite in the Hongseong area, and the Permo-Triassic Samgot mafic granulite in the Imjingang Belt of the central western Korean Peninsula through the application of modern phase equilibria techniques. The Baekdong and Samgot mafic granulites and the Bibong retrogressed eclogite yield a range of 12.0 -16.0 kbar and 800 -900℃, representing HP granulite facies conditions. The Sinri and Daepan granulites from the Hongseong area show relatively lower grade metamorphic conditions between HP granulite and normal granulite facies, and are characterized by sub-isothermal decompression during exhumation. The similarities in the metamorphic ages and the post-collisional igneous activity from the central western Korean Peninsula indicate that the Triassic ages represent the retrograde stage of the metamorphic Pe T paths. In contrast, the Late Permian metamorphic ages, which are older than protolith ages of the post-collisional igneous rocks, correspond to the possible prograde stage of metamorphism. The P-T-t paths presented in this paper, together with the metamorphic ages and post-orogenic igneous events reported from these areas suggest trace of the subduction, accretion and exhumation history, and indicate a tectonic linkage among the northeast Asian continents during the Paleo-Tethyan Ocean closure.

Enrichment of Mantle-derived Fluids in the Formation Process of Granitoids: Evidence from the Himalayan Granitoids around Kunjirap in the Western Qinghai-Tibet Plateau

Taking the Himalayan granitoids around Kunjirap in the western Qinghai-Tibetplateau as an example, the authors present in this paper the characteristics of the granitoids richin mantle-derived fluid components and discuss their rock-forming mechanism. The research resultsindicate that the rock assemblage of the studied granitoids involves diopside syenite-diopsidegranite-biotite (monzonitic) granite, consisting mainly of K-feldspar, oligoclase, quartz,iron-phlogolite, diopside and edenite. The rocks are rich in mantle-derived fluid components ofvolatiles including F, alkali metal elements such as K, Na, Rb, Sr and Ha, and radiogenicheat-producing elements such as U and Th. They were generated by the influx of mantle-derived fluidsinto the lower crest to give rise to partial melting during the lithosphere thinning in theQinghai-Tibet plateau.

Oil and Gas Accumulation in the Foreland Basins,Central and Western China

Foreland basin represents one of the most important hydrocarbon habitats in central and western China. To distinguish these foreland basins regionally, and according to the need of petroleum exploration and favorable exploration areas, the foreland basins in central and western China can be divided into three structural types： superimposed, retrogressive and reformative foreland basin （or thrust belt）, each with distinctive petroleum system characteristics in their petroleum system components （such as the source rock, reservoir rock, caprock, time of oil and gas accumulation, the remolding of oil/gas reservoir after accumulation, and the favorable exploration area, etc.）. The superimposed type foreland basins, as exemplified by the Kuqa Depression of the Tarim Basin, characterized by two stages of early and late foreland basin development, typically contain at least two hydrocarbon source beds, one deposited in the early foreland development and another in the later fault-trough lake stage. Hydrocarbon accumulations in this type of foreland basin often occur in multiple stages of the basin development, though most of the highly productive pools were formed during the late stage of hydrocarbon migration and entrapment （Himalayan period）. This is in sharp contrast to the retrogressive foreland basins （only developing foreland basin during the Permian to Triassic） such as the western Sichuan Basin, where prolific hydrocarbon source rocks are associated with sediments deposited during the early stages of the foreland basin development. As a result, hydrocarbon accumulations in retrogressive foreland basins occur mainly in the early stage of basin evolution. The reformative foreland basins （only developing foreland basin during the Himalayan period） such as the northern Qaidam Basin, in contrast, contain organic-rich, lacustrine source rocks deposited only in fault-trough lake basins occurring prior to the reformative foreland development during the late Cenozoic, with hydrocarbon accumulations taking place relatively late （Himalayan period）. Therefore, the ultimate hydrocarbon potentials in the three types of foreland basins are largely determined by the extent of spatial and temporal matching among the thrust belts, hydrocarbon source kitchens, and regional and local caprocks.