The islanded mode is one of the connection modes of the grid distributed generation resources.In this study,a distributed generation resource is connected to linear and nonlinear loads via a three-phase inverter where...The islanded mode is one of the connection modes of the grid distributed generation resources.In this study,a distributed generation resource is connected to linear and nonlinear loads via a three-phase inverter where a control method needing no current sensors or compensator elements is applied to the distribute generation system in the islanded mode.This control method has two main loops in each phase.The first loop controls the voltage control loops that adjust the three-phase point of common coupling,the amplitude of the non-sinusoidal reference waveform and the near-state pulse width modulation(NSPWM)method.The next loop compensates the harmonic compensator loop that calculates the voltage harmonics of the point of common coupling in each phase,and injects them to compensate the non-sinusoidal reference waveforms of each phase.The simulation results in MATLAB/SIMULINK show that this method can generate balanced threephase sinusoidal voltage with an acceptable total harmonic distortion(THD)at the joint connection point.展开更多
With the increasing demand for electrical services,wind farm layout optimization has been one of the biggest challenges that we have to deal with.Despite the promising performance of the heuristic algorithm on the rou...With the increasing demand for electrical services,wind farm layout optimization has been one of the biggest challenges that we have to deal with.Despite the promising performance of the heuristic algorithm on the route network design problem,the expressive capability and search performance of the algorithm on multi-objective problems remain unexplored.In this paper,the wind farm layout optimization problem is defined.Then,a multi-objective algorithm based on Graph Neural Network(GNN)and Variable Neighborhood Search(VNS)algorithm is proposed.GNN provides the basis representations for the following search algorithm so that the expressiveness and search accuracy of the algorithm can be improved.The multi-objective VNS algorithm is put forward by combining it with the multi-objective optimization algorithm to solve the problem with multiple objectives.The proposed algorithm is applied to the 18-node simulation example to evaluate the feasibility and practicality of the developed optimization strategy.The experiment on the simulation example shows that the proposed algorithm yields a reduction of 6.1% in Point of Common Coupling(PCC)over the current state-of-the-art algorithm,which means that the proposed algorithm designs a layout that improves the quality of the power supply by 6.1%at the same cost.The ablation experiments show that the proposed algorithm improves the power quality by more than 8.6% and 7.8% compared to both the original VNS algorithm and the multi-objective VNS algorithm.展开更多
As for the Domino effect dv/dt and electromagnetic interference during the rapid switching course of single-chip switching power supply,this article firstly analyzes electromagnetic interference source,and then diagno...As for the Domino effect dv/dt and electromagnetic interference during the rapid switching course of single-chip switching power supply,this article firstly analyzes electromagnetic interference source,and then diagnoses the essential interaction relationship between interference and switching activity based on the timely and area measured waveform,analyzes and studies the production mechanism and coupling path of interference mode,and sets up circuit model according to the features of transverse mode interference and common mode interference.Put forward different suppression methods finally.展开更多
Wind generation is being increasingly connected at distribution level due to increasing load demand. Permanent magnet synchronous generator (PMSG) is connected to?the wind turbine directly. Through the full power cont...Wind generation is being increasingly connected at distribution level due to increasing load demand. Permanent magnet synchronous generator (PMSG) is connected to?the wind turbine directly. Through the full power control of AC-DC-AC converters, the electrical power is then connected to the power grid. The power conversion circuits are made up of generator-side three phase diode rectifiers, boost converter and the grid-side three bridges and four wire inverters. A boost converter is controlled through an intelligence controller to maintained DC power constant despite of Variable output of PMSG, the grid-connected operation is constructed using the hysteresis current control method. The inverter is controlled to perform following function 1) power converter to inject power generated from RES to the grid, and 2) shunt APF to compensate current unbalance, load current harmonics, load reactive power demand and load neutral current. The model is implemented in MATLAB/ Simulink using sim power system.展开更多
配电系统中无功负载的投切会使公共耦合点(point of common coupling,PCC)电压发生波动。为了提高配电网的电压质量,该文详细分析了基于模块化多电平换流器的静止同步补偿器(static synchronous compensator-modular multilevel convert...配电系统中无功负载的投切会使公共耦合点(point of common coupling,PCC)电压发生波动。为了提高配电网的电压质量,该文详细分析了基于模块化多电平换流器的静止同步补偿器(static synchronous compensator-modular multilevel converters,MMC-STATCOM)的PCC电压调节原理,采用带有无功电流指令值反馈环路的PCC电压下垂控制方法,根据输出无功电流指令乘以可控的变换器等效阻抗以实时修正PCC电压参考值。与传统的基于输出无功电流反馈值的下垂控制方法相比,该文提出的下垂调节方法不受电流内环控制性能的影响,PCC电压可以根据装置补偿容量与负载特性在可以接受的一定范围内波动。同时,MMC-STATCOM采用3个环路的均压控制策略以维持每个子模块的电容电压平衡。基于Matlab/Simulink平台的仿真结果,以及基于60 V/2 k VA实验样机的实验结果,验证了该文PCC电压下垂控制方法的正确性与有效性。展开更多
基金International Research Partnership“Electrical Engineering-Thai French Research Center(EE-TFRC)”under the project framework of the Lorraine Universitéd’Excellence(LUE)in cooperation between Universitéde Lorraine and King Mongkut’s University of Technology North Bangkok and in part by the National Research Council of Thailand(NRCT)under Senior Research Scholar Program under Grant No.N42A640328National Science,Research and Innovation Fund(NSRF)under King Mongkut’s University of Technology North Bangkok under Grant No.KMUTNB-FF-65-20.
文摘The islanded mode is one of the connection modes of the grid distributed generation resources.In this study,a distributed generation resource is connected to linear and nonlinear loads via a three-phase inverter where a control method needing no current sensors or compensator elements is applied to the distribute generation system in the islanded mode.This control method has two main loops in each phase.The first loop controls the voltage control loops that adjust the three-phase point of common coupling,the amplitude of the non-sinusoidal reference waveform and the near-state pulse width modulation(NSPWM)method.The next loop compensates the harmonic compensator loop that calculates the voltage harmonics of the point of common coupling in each phase,and injects them to compensate the non-sinusoidal reference waveforms of each phase.The simulation results in MATLAB/SIMULINK show that this method can generate balanced threephase sinusoidal voltage with an acceptable total harmonic distortion(THD)at the joint connection point.
基金supported by the Natural Science Foundation of Zhejiang Province(LY19A020001).
文摘With the increasing demand for electrical services,wind farm layout optimization has been one of the biggest challenges that we have to deal with.Despite the promising performance of the heuristic algorithm on the route network design problem,the expressive capability and search performance of the algorithm on multi-objective problems remain unexplored.In this paper,the wind farm layout optimization problem is defined.Then,a multi-objective algorithm based on Graph Neural Network(GNN)and Variable Neighborhood Search(VNS)algorithm is proposed.GNN provides the basis representations for the following search algorithm so that the expressiveness and search accuracy of the algorithm can be improved.The multi-objective VNS algorithm is put forward by combining it with the multi-objective optimization algorithm to solve the problem with multiple objectives.The proposed algorithm is applied to the 18-node simulation example to evaluate the feasibility and practicality of the developed optimization strategy.The experiment on the simulation example shows that the proposed algorithm yields a reduction of 6.1% in Point of Common Coupling(PCC)over the current state-of-the-art algorithm,which means that the proposed algorithm designs a layout that improves the quality of the power supply by 6.1%at the same cost.The ablation experiments show that the proposed algorithm improves the power quality by more than 8.6% and 7.8% compared to both the original VNS algorithm and the multi-objective VNS algorithm.
基金Tianjin Natunal science Foundation of China(No:05YFSYSF033)
文摘As for the Domino effect dv/dt and electromagnetic interference during the rapid switching course of single-chip switching power supply,this article firstly analyzes electromagnetic interference source,and then diagnoses the essential interaction relationship between interference and switching activity based on the timely and area measured waveform,analyzes and studies the production mechanism and coupling path of interference mode,and sets up circuit model according to the features of transverse mode interference and common mode interference.Put forward different suppression methods finally.
文摘Wind generation is being increasingly connected at distribution level due to increasing load demand. Permanent magnet synchronous generator (PMSG) is connected to?the wind turbine directly. Through the full power control of AC-DC-AC converters, the electrical power is then connected to the power grid. The power conversion circuits are made up of generator-side three phase diode rectifiers, boost converter and the grid-side three bridges and four wire inverters. A boost converter is controlled through an intelligence controller to maintained DC power constant despite of Variable output of PMSG, the grid-connected operation is constructed using the hysteresis current control method. The inverter is controlled to perform following function 1) power converter to inject power generated from RES to the grid, and 2) shunt APF to compensate current unbalance, load current harmonics, load reactive power demand and load neutral current. The model is implemented in MATLAB/ Simulink using sim power system.
文摘配电系统中无功负载的投切会使公共耦合点(point of common coupling,PCC)电压发生波动。为了提高配电网的电压质量,该文详细分析了基于模块化多电平换流器的静止同步补偿器(static synchronous compensator-modular multilevel converters,MMC-STATCOM)的PCC电压调节原理,采用带有无功电流指令值反馈环路的PCC电压下垂控制方法,根据输出无功电流指令乘以可控的变换器等效阻抗以实时修正PCC电压参考值。与传统的基于输出无功电流反馈值的下垂控制方法相比,该文提出的下垂调节方法不受电流内环控制性能的影响,PCC电压可以根据装置补偿容量与负载特性在可以接受的一定范围内波动。同时,MMC-STATCOM采用3个环路的均压控制策略以维持每个子模块的电容电压平衡。基于Matlab/Simulink平台的仿真结果,以及基于60 V/2 k VA实验样机的实验结果,验证了该文PCC电压下垂控制方法的正确性与有效性。
