The Chinese Academy of Meteorological Sciences （CAMS） two-moment bulk microphysics scheme was adopted in this study to investigate the representation of cloud and precipitation processes under different environmenta...The Chinese Academy of Meteorological Sciences （CAMS） two-moment bulk microphysics scheme was adopted in this study to investigate the representation of cloud and precipitation processes under different environmental conditions.The scheme predicts the mixing ratio of water vapor as well as the mixing ratios and number concentrations of cloud droplets,rain,ice,snow,and graupel.A new parameterization approach to simulate heterogeneous droplet activation was developed in this scheme.Furthermore,the improved CAMS scheme was coupled with the Weather Research and Forecasting model （WRF v3.1）,which made it possible to simulate the microphysics of clouds and precipitation as well as the cloud-aerosol interactions in selected atmospheric condition.The rain event occurring on 27-28 December 2008 in eastern China was simulated using the CAMS scheme and three sophisticated microphysics schemes in the WRF model.Results showed that the simulated 36-h accumulated precipitations were generally agreed with observation data,and the CAMS scheme performed well in the southern area of the nested domain.The radar reflectivity,the averaged precipitation intensity,and the hydrometeor mixing ratios simulated by the CAMS scheme were generally consistent with those from other microphysics schemes.The hydrometeor number concentrations simulated by the CAMS scheme were also close to the experiential values in stratus clouds.The model results suggest that the CAMS scheme performs reasonably well in describing the microphysics of clouds and precipitation in the mesoscale WRF model.展开更多
The influences of nonlinear centrifugal force to large overall attitude motion of coupled rigid-flexible system was investigated. First the nonlinear model of the coupled rigid-flexible system was deduced from the ide...The influences of nonlinear centrifugal force to large overall attitude motion of coupled rigid-flexible system was investigated. First the nonlinear model of the coupled rigid-flexible system was deduced from the idea of “centrifugal potential field', and then the dynamic effects of the nonlinear centrifugal force to system attitude motion were analyzed by approximate calculation; At last, the Lyapunov function based on energy norm was selected, in the condition that only the measured values of attitude and attitude speed are available, and it is proved that the PD feedback control law can ensure the attitude stability during large angle maneuver.展开更多
Correct predictions of the behavior of flexible bodies undergoing large rigid-body motions and small elastic vibrations is a subject of major concern in the field of flexible multibody system dynamics. Because of fail...Correct predictions of the behavior of flexible bodies undergoing large rigid-body motions and small elastic vibrations is a subject of major concern in the field of flexible multibody system dynamics. Because of failing to account for the effects of dynamic stiffening, conventional methods based on the linear theories can lead to erroneous results in many practical applications. In this paper, the idea of 'centrifugal potential field', which induced by large overall rotation is introduced, and the motion equation of a coupled rigid-flexible system by employing Hamilton's principle is established. Based on this equation, first it is proved that the elastic motion of the system has periodic property, then by using Frobenius' method its exact solution is obtained. The influences of large overall rigid motion on the elastic vibration mode shape and frequency are analysed through the numerical examples.展开更多
An adaptive finite element-element-free Galerkin (FE-EFG) coupling method is proposed and developed for the numerical simulation of bulk metal forming processes. This approach is able to adaptively convert distorted F...An adaptive finite element-element-free Galerkin (FE-EFG) coupling method is proposed and developed for the numerical simulation of bulk metal forming processes. This approach is able to adaptively convert distorted FE elements to EFG domain in analysis. A new scheme to implement adaptive conversion and coupling is presented. The coupling method takes both advantages of finite element method (FEM) and meshless methods. It is capable of handling large deformations with no need of remeshing procedures, while it is computationally more efficient than those full meshless methods. The effectiveness of the proposed method is demonstrated with the numerical simulations of the bulk metal forming processes including forging and extrusion.展开更多
It has been widely recognized that,based on standard density functional theory calculations of the electron-phonon coupling,the superconducting transition temperature(T_(c))in bulk FeSe is exceptionally low(almost 0 K...It has been widely recognized that,based on standard density functional theory calculations of the electron-phonon coupling,the superconducting transition temperature(T_(c))in bulk FeSe is exceptionally low(almost 0 K)within the Bardeen-Cooper-Schrieffer formalism.Yet the experimentally observed T_(c)is much higher(∼10 K),and the underlying physical origin remains to be fully explored,especially at the quantitative level.Here we present the first accurate determination of T_(c)in FeSe where the correlation-enhanced electron-phonon coupling is treated within first-principles dynamical mean-field theory.Our studies treat both the multiple electronic bands across the Fermi level and phononic bands,and reveal that all the optical phonon modes are effectively coupled with the conduction electrons,including the important contributions of a single breathing mode as established by previ-ous experiments.Accordingly,each of those phonon modes contributes pronouncedly to the electron pairing,and the resultant T_(c)is drastically enhanced to the experimentally observed range.The approach developed here should be broadly applicable to other superconducting systems where correlation-enhanced electron-phonon coupling plays an important role.展开更多
A high-overtone bulk acoustic resonator （HBAR） is composed of a substrate, a piezoelectric film and upper and lower electrodes, the influences of their structure parameter （thickness） and performance parameter （c...A high-overtone bulk acoustic resonator （HBAR） is composed of a substrate, a piezoelectric film and upper and lower electrodes, the influences of their structure parameter （thickness） and performance parameter （characteristic impedance） on effective electromechani- cal coupling coefficient K^2eff are investigated systematically. The relationship between K^2eff and these parameters is obtained by a lumped parameter equivalent circuit instead of distributed parameter equivalent circuit near the resonant frequency, and K^2eff at the resonance frequency closest to the given frequency is analyzed. The results show that K^2eff declines rapidly and oscillatorily with the continuous increase of the substrate thickness when the piezoelectric film thickness is fixed, and decreases inversely proportion to the thickness when the substrate thick-ness is greater than a certain value. With the ratio of the characteristic impedance of the substrate to the piezoelectric layer increasing, the maximum of K^2eff obtained from the vari- ation curve of K^2eff with the continuous increase of the piezoelectric film thickness decreases rapidly before reaching the minimum value, and later increases slowly. Fused silica with low impedance is appropriate as the substrate of HBAR to get a larger K^2eff. Compared with Al electrode, Au electrode can obtain larger K^2eff when the appropriate electrode thickness is selected. The revealed laws above mentioned provide the theoretical basis for optimizing parameters of HBAR.展开更多
粮仓中存在压力场、温度场和湿度场等多物理场,为了得出各物理因子共同影响下的粮堆内湿热传递规律,该研究利用自行研制的粮堆多场耦合试验装置,针对仓内小麦粮堆单元体,研究在高温边界38.5℃、低温边界5.2℃,初始粮温25.8℃,竖向压力...粮仓中存在压力场、温度场和湿度场等多物理场,为了得出各物理因子共同影响下的粮堆内湿热传递规律,该研究利用自行研制的粮堆多场耦合试验装置,针对仓内小麦粮堆单元体,研究在高温边界38.5℃、低温边界5.2℃,初始粮温25.8℃,竖向压力分别为50、100、150 kPa条件下小麦粮堆湿热传递情况。试验结果表明:竖向压力增加,粮堆孔隙率减小,热量通过粮食籽粒间传导增加,传递速率加快,竖向压力从50 kPa增大至150 k Pa,粮温较入仓时下降约0.5~1.3℃,温度梯度变化率达8.7%,不同压力下粮堆高温区面积随储藏时间呈幂函数减小。粮堆内湿空气在边界处累积至峰值时会有部分湿空气向粮堆内迁移。粮堆中部与靠近低温边界温差大于6.3℃时,粮堆内湿空气扩散加快,粮堆中部平均相对湿度下降速率随竖向压力增加而加快。研究结果可为散装粮堆多场耦合研究提供理论支持。展开更多
基金supported by National Natural Science Foundation of China (Grant Nos. 40637035,41075019)
文摘The Chinese Academy of Meteorological Sciences （CAMS） two-moment bulk microphysics scheme was adopted in this study to investigate the representation of cloud and precipitation processes under different environmental conditions.The scheme predicts the mixing ratio of water vapor as well as the mixing ratios and number concentrations of cloud droplets,rain,ice,snow,and graupel.A new parameterization approach to simulate heterogeneous droplet activation was developed in this scheme.Furthermore,the improved CAMS scheme was coupled with the Weather Research and Forecasting model （WRF v3.1）,which made it possible to simulate the microphysics of clouds and precipitation as well as the cloud-aerosol interactions in selected atmospheric condition.The rain event occurring on 27-28 December 2008 in eastern China was simulated using the CAMS scheme and three sophisticated microphysics schemes in the WRF model.Results showed that the simulated 36-h accumulated precipitations were generally agreed with observation data,and the CAMS scheme performed well in the southern area of the nested domain.The radar reflectivity,the averaged precipitation intensity,and the hydrometeor mixing ratios simulated by the CAMS scheme were generally consistent with those from other microphysics schemes.The hydrometeor number concentrations simulated by the CAMS scheme were also close to the experiential values in stratus clouds.The model results suggest that the CAMS scheme performs reasonably well in describing the microphysics of clouds and precipitation in the mesoscale WRF model.
文摘The influences of nonlinear centrifugal force to large overall attitude motion of coupled rigid-flexible system was investigated. First the nonlinear model of the coupled rigid-flexible system was deduced from the idea of “centrifugal potential field', and then the dynamic effects of the nonlinear centrifugal force to system attitude motion were analyzed by approximate calculation; At last, the Lyapunov function based on energy norm was selected, in the condition that only the measured values of attitude and attitude speed are available, and it is proved that the PD feedback control law can ensure the attitude stability during large angle maneuver.
文摘Correct predictions of the behavior of flexible bodies undergoing large rigid-body motions and small elastic vibrations is a subject of major concern in the field of flexible multibody system dynamics. Because of failing to account for the effects of dynamic stiffening, conventional methods based on the linear theories can lead to erroneous results in many practical applications. In this paper, the idea of 'centrifugal potential field', which induced by large overall rotation is introduced, and the motion equation of a coupled rigid-flexible system by employing Hamilton's principle is established. Based on this equation, first it is proved that the elastic motion of the system has periodic property, then by using Frobenius' method its exact solution is obtained. The influences of large overall rigid motion on the elastic vibration mode shape and frequency are analysed through the numerical examples.
基金Project (No. 50575143) supported by the National Natural Science Foundation of China
文摘An adaptive finite element-element-free Galerkin (FE-EFG) coupling method is proposed and developed for the numerical simulation of bulk metal forming processes. This approach is able to adaptively convert distorted FE elements to EFG domain in analysis. A new scheme to implement adaptive conversion and coupling is presented. The coupling method takes both advantages of finite element method (FEM) and meshless methods. It is capable of handling large deformations with no need of remeshing procedures, while it is computationally more efficient than those full meshless methods. The effectiveness of the proposed method is demonstrated with the numerical simulations of the bulk metal forming processes including forging and extrusion.
基金supported by the National Key R&D Program of China(Grant No.2017YFA0303500)the National Natural Science Foundation of China(Grant Nos.11634011,11974323,and 12004364)+2 种基金the Anhui Initiative in Quantum Information Technologies(Grant No.AHY170000)the Strategic Priority Research Program of Chinese Academy of Sciences(Grant No.XDB30000000)the China Postdoctoral Science Foundation(Grant No.2019TQ0314)。
文摘It has been widely recognized that,based on standard density functional theory calculations of the electron-phonon coupling,the superconducting transition temperature(T_(c))in bulk FeSe is exceptionally low(almost 0 K)within the Bardeen-Cooper-Schrieffer formalism.Yet the experimentally observed T_(c)is much higher(∼10 K),and the underlying physical origin remains to be fully explored,especially at the quantitative level.Here we present the first accurate determination of T_(c)in FeSe where the correlation-enhanced electron-phonon coupling is treated within first-principles dynamical mean-field theory.Our studies treat both the multiple electronic bands across the Fermi level and phononic bands,and reveal that all the optical phonon modes are effectively coupled with the conduction electrons,including the important contributions of a single breathing mode as established by previ-ous experiments.Accordingly,each of those phonon modes contributes pronouncedly to the electron pairing,and the resultant T_(c)is drastically enhanced to the experimentally observed range.The approach developed here should be broadly applicable to other superconducting systems where correlation-enhanced electron-phonon coupling plays an important role.
基金supported by the National Natural Science Foundation of China(11374327)
文摘A high-overtone bulk acoustic resonator （HBAR） is composed of a substrate, a piezoelectric film and upper and lower electrodes, the influences of their structure parameter （thickness） and performance parameter （characteristic impedance） on effective electromechani- cal coupling coefficient K^2eff are investigated systematically. The relationship between K^2eff and these parameters is obtained by a lumped parameter equivalent circuit instead of distributed parameter equivalent circuit near the resonant frequency, and K^2eff at the resonance frequency closest to the given frequency is analyzed. The results show that K^2eff declines rapidly and oscillatorily with the continuous increase of the substrate thickness when the piezoelectric film thickness is fixed, and decreases inversely proportion to the thickness when the substrate thick-ness is greater than a certain value. With the ratio of the characteristic impedance of the substrate to the piezoelectric layer increasing, the maximum of K^2eff obtained from the vari- ation curve of K^2eff with the continuous increase of the piezoelectric film thickness decreases rapidly before reaching the minimum value, and later increases slowly. Fused silica with low impedance is appropriate as the substrate of HBAR to get a larger K^2eff. Compared with Al electrode, Au electrode can obtain larger K^2eff when the appropriate electrode thickness is selected. The revealed laws above mentioned provide the theoretical basis for optimizing parameters of HBAR.
文摘粮仓中存在压力场、温度场和湿度场等多物理场,为了得出各物理因子共同影响下的粮堆内湿热传递规律,该研究利用自行研制的粮堆多场耦合试验装置,针对仓内小麦粮堆单元体,研究在高温边界38.5℃、低温边界5.2℃,初始粮温25.8℃,竖向压力分别为50、100、150 kPa条件下小麦粮堆湿热传递情况。试验结果表明:竖向压力增加,粮堆孔隙率减小,热量通过粮食籽粒间传导增加,传递速率加快,竖向压力从50 kPa增大至150 k Pa,粮温较入仓时下降约0.5~1.3℃,温度梯度变化率达8.7%,不同压力下粮堆高温区面积随储藏时间呈幂函数减小。粮堆内湿空气在边界处累积至峰值时会有部分湿空气向粮堆内迁移。粮堆中部与靠近低温边界温差大于6.3℃时,粮堆内湿空气扩散加快,粮堆中部平均相对湿度下降速率随竖向压力增加而加快。研究结果可为散装粮堆多场耦合研究提供理论支持。
