Preliminary Study of Chemical Elements Distribution in Petroleum Source Rocks Donga and Yogou Formations of the Termit Sedimentary Basin (Est-Niger)

XRF and EDX analyses were carried out on 18 batches of representative raw samples to determine the distribution of major chemical elements in the petroleum source rocks of Donga and Yogou formations of Termit sedimentary basin. The chemical composition of these formations is dominated by silicon (Si), aluminum (Al) and iron (Fe). This is consistent with the oxide composition, which is also dominated by silicon oxide (SiO2), aluminum oxide (Al2O3) and iron monoxide (FeO). No less important chemical elements are calcium (Ca), potassium (K), sulfur (S), titanium (Ti), magnesium (Mg), manganese (Mn) and barium (Ba), as well as some of their oxides. All these major chemical elements are carried by silicate detrital minerals associated with pyrite and goethite and/or clay minerals such as kaolinite and interstratified illite, smectite and chlorite. This trend is illustrated by the values of the Si/Al and SiO2/Al2O3 ratios.

Does the Redshift Distribution of Swift Long GRBs Trace the Star-Formation Rate?

Gamma-ray bursts (GRBs) are extremely powerful explosions that have been traditionally classified into two categories: long bursts (LGRBs) with an observed duration T90 > 2 s, and short bursts (SGRBs) with an observed duration T90 T90 is the time interval during which 90% of the fluence is detected. LGRBs are believed to emanate from the core-collapse of massive stars, while SGRBs are believed to result from the merging of two compact objects, like two neutron stars. Because LGRBs are produced by the violent death of massive stars, we expect that their redshift distribution should trace the star-formation rate (SFR). The purpose of our study is to investigate the extent to which the redshift distribution of LGRBs follows and reflects the SFR. We use a sample of 370 LGRBs taken from the Swift catalog, and we investigate different models for the LGRB redshift distribution. We also carry out Monte Carlo simulations to check the consistency of our results. Our results indicate that the SFR can describe the LGRB redshift distribution well for high redshift bursts, but it needs an evolution term to fit the distribution well at low redshift.

Gulong shale oil enrichment mechanism and orderly distribution of conventional–unconventional oils in the Cretaceous Qingshankou Formation,Songliao Basin,NE China

Through the study of organic matter enrichment,hydrocarbon generation and accumulation process of black shale of the Cretaceous Qingshankou Formation in the Songliao Basin,the enrichment mechanism of Gulong shale oil and the distribution of conventional–unconventional oil are revealed.The Songliao Basin is a huge interior lake basin formed in the Early Cretaceous under the control of the subduction and retreat of the western Pacific plate and the massive horizontal displacement of the Tanlu Fault Zone in Northeast China.During the deposition of the Qingshankou Formation,strong terrestrial hydrological cycle led to the lake level rise of the ancient Songliao Basin and the input of a large amount of nutrients,resulting in planktonic bacteria and algae flourish.Intermittent seawater intrusion events promoted the formation of salinization stratification and anoxic environment in the lake,which were beneficial to the enrichment of organic matters.Biomarkers analysis confirms that the biogenic organic matter of planktonic bacteria and algae modified by microorganisms plays an important role in the formation of high-quality source rocks with high oil generation capability.There are four favorable conditions for the enrichment of light shale oil in the Qingshankou Formation of the Gulong Sag,Songliao Basin:the moderate organic matter abundance and high oil potential provide sufficient material basis for oil enrichment;high degree of thermal evolution makes shale oil have high GOR and good mobility;low hydrocarbon expulsion efficiency leads to a high content of retained hydrocarbons in the source rock;and the confinement effect of intra-layer cement in the high maturity stage induces the efficient accumulation of light shale oil.The restoration of hydrocarbon accumulation process suggests that liquid hydrocarbons generated in the early(low–medium maturity)stage of the Qingshankou Formation source rocks accumulated in placanticline and slope after long-distance secondary migration,forming high-quality conventional and tight oil reservoirs.Light oil generated in the late(medium–high maturity)stage accumulated in situ,forming about 15 billion tons of Gulong shale oil resources,which finally enabled the orderly distribution of conventional–unconventional oils that are contiguous horizontally and superposed vertically within the basin,showing a complete pattern of“whole petroleum system”with conventional oil,tight oil and shale oil in sequence.

Reclassification and distribution patterns of discovered oils in theDongying Depression, Bohai Bay Basin, China

The Dongying Depression is an important petrolifeous province,with diverse source rocks and complex petroleum distribution patterns.A total of 32 crude oils were analyzed by the gas chromatographyemass spectrometry and isotopic compositions to better understanding the petroleum systems in the study area.Three oil types were classified by hierarchical cluster analyses.Type I and II oils have closely correlation with the discovered source rocks,which have been confirmed to be mainly derived from the lower third and upper forth member of the Eocene Shahejie Formation source rocks(Es3^(L) and Es4^(U)),respectively.Obviously,type III oils contain abundant gammacerane,tricyclic terpanes and C_(29) steranes and have lower values of δ13C than type I and II oils,indicating a completely different source rock and biological origins.Until recently,type III oils fail to match any of the discovered source rock,which contains main contribution of aquatic organism or/and bacteria inputs.In addition,the spacial distribution of these three oil types were discussed.Type I oils mainly distributed in the Es3 and Es4 reservoirs that closed to the generative kitchens.Type II oils occurred in the Es4 reservoirs in the sourthern slope of the depression,which probably caused by lateral migration along the horizontal fractures and sandstone layers within the Es4 interval.Differently,type III oils in the sourthern slope of the depression were mainly discovered in the Eocene Kongdian or Ordocician reservoirs,which suggests great exploration potential of deep underlying strata.

The application of Gaussian distribution deconvolution method to separate the overlapping signals in the 2D NMR map

The 2D NMR(T_(1)-T_(2))mapping technique,which can be used to separate different proton populations from various sources(hydroxyls,solid organic matter,free water,and free HC)has gained attention in petroleum industry.To separate proton contributions,a fixed straight line is commonly employed to separate different regions representing proton sources on the map.However,some of these regions(Region 1 and 2)might overlap which makes extracting the NMR signal amplitude from these regions inaccurate.In order to solve this issue,in this study,we applied the Gaussian distribution deconvolution method to separate the T_(1)and T_(2)relaxation distributions and then derived the signal amplitude of each region instead of following the common fixed line approach.Next,we employed this method to analyze several shale samples from the literature and compared the results following both methods to verify our methodology.Finally,samples from the Bakken Shale were studied to separate signals from Region 1 and Region 2 and corelated the results with geochemical properties that were obtained from programmed(Rock Eval)pyrolysis.Results demonstrated an improvement in their relation when our approach is employed compared to the fixed line technique to differentiate signal from overlapping regions.This means the Gaussian distribution deconvolution method can be used with confidence to provide us with more accurate petrophysical and geochemical understanding of complex formations.

Tectonic Fractures in Tight Gas Sandstones of the Upper Triassic Xujiahe Formation in the Western Sichuan Basin,China

The western Sichuan Basin, which is located at the front of the Longmen Mountains in the west of Sichuan Province, China, is a foreland basin formed in the Late Triassic. The Upper Triassic Xujiahe Formation is a tight gas sandstone reservoir with low porosity and ultra-low permeability, whose gas accumulation and production are controlled by well-developed fracture zones. There are mainly three types of fractures developed in the Upper Triassic tight gas sandstones, namely tectonic fractures, diagenetic fractures and overpressure-related fractures, of which high-angle tectonic fractures are the most important. The tectonic fractures can be classified into four sets, i.e., N-S-, NE-, E-W- and NW-striking fractures. In addition, there are a number of approximately horizontal shear fractures in some of the medium-grained sandstones and grit stones nearby the thrusts or slip layers. Tectonic fractures were mainly formed at the end of the Triassic, the end of the Cretaceous and the end of the Neogene-Early Pleistocene. The development degree of tectonic fractures was controlled by lithology, thickness, structure, stress and fluid pressure. Overpressure makes not only the rock shear strength decrease, but also the stress state change from compression to tension. Thus, tensional fractures can he formed in fold-thrust belts. Tectonic fractures are mainly developed along the NE- and N-S-striking structural belts, and are the important storage space and the principal flow channels in the tight gas sandstone. The porosity of fractures here is 28.4% of the gross reservoir porosity, and the permeability of fractures being two or three grades higher than that of the matrix pores. Four sets of high-angle tectonic fractures and horizontal shear fractures formed a good network system and controlled the distribution and production of gas in the tight sandstones.

Sedimentary Facies and Distribution of Reservoir Rocks from the Feixianguan Formation in the Daxian-Xuanhan Region, NE Sichuan

The Lower Triassic Feixianguan Formation in the Daxian-Xuanhan region, northeastern Sicbuan is interpreted to be a carbonate platform intermediate between the West Hubei-East Cbongqing marine basin and Guangyuan-Wangcang marine basin. Outcrops, well logs and seismic data have disclosed that three sedimentary facies can be identified for the formation： open platform, platform exposed shoal and restricted platform facies. During the early stage of deposition of the Feixianguan Formation, there existed a sedimentary framework all the same as the Late Permian one： open platform in the west, and platform exposed shoal, restricted platform and open platform eastwards. The gradual increase of the shoal area permitted eastward migration of the shoal facies. During the deposition of the third member of the Feixianguan Formation, the study area was invaded by temporary transgressions. Till the deposition of the fourth member of the formation, the study area was prevailed over the unified restricted platform deposits, as indicated by the sedimentary model for the typical carbonate platform shoal deposits. The reservoir rocks in the Feixianguan Formation consist mostly of solution opening dolostone, and the rock types are assembled by oolitic dolostone, residual oolitic dolostone and sucrosic residual oolitic medium- to coarse-grained dolostone. The deep and shallow dual laterologs show relatively high resistivity, clear amplitude differences and time difference saltation of acoustic waves in some intervals. The seismic responses are indicated by low-frequency and highly variable amplitudes and chaotic reflection configurations. The reservoir rocks are characterized by high porosity-high permeability and medium porosity-medium permeability, showing a marked correlation between porosity and permeability. Solution openings are extremely developed in the reservoir rocks, including cast pores, intergranular solution openings, intercrystal pores, intercrystal solution openings, solution openings （caves） and minute fissures. Macropores and coarse pore throats are common. The reservoir rocks are apparently controlled by sedimentary facies in distribution patterns. Vertically, they occur dominantly in the second and first members of the Feixianguan Formation, and laterally in the platform exposed shoals and restricted platforms, where good natural gas potential is expected.

Nanoscale pore morphology and distribution of lacustrine shale reservoirs:Examples from the Upper Triassic Yanchang Formation,Ordos Basin

Pore structure plays an important role in the gas storage and flow capacity of shale gas reservoirs. Fieldemission environmental scanning electron microscopy（FE-SEM） in combination with low-pressure carbon dioxide gas adsorption（CO2GA）,nitrogen gas adsorption（N2GA）,and high-pressure mercury intrusion（HPMI） were used to study the nanostructure pore morphology and pore-size distributions（PSDs） of lacustrine shale from the Upper Triassic Yanchang Formation,Ordos Basin. Results show that the pores in the shale reservoirs are generally nanoscale and can be classified into four types： organic,interparticle,intraparticle,and microfracture. The interparticle pores between clay particles and organic-matter pores develop most often,l with pore sizes that vary from several to more than 100 nm. Mercury porosimetry analysis shows total porosities ranging between 1.93 and 7.68%,with a mean value of 5.27%. The BET surface areas as determined by N2 adsorption in the nine samples range from 10 to 20 m2/g and the CO2 equivalent surface areas（2 nm）vary from 18 to 71 m2/g. Together,the HPMI,N2 GA,and CO2 GA curves indicate that the pore volumes are mainly due to pores 100 nm in size. In contrast,however,most of the specific surface areas are provided by the micropores. The total organic carbon（TOC） and clay minerals are the primary controls of the structures of nanoscale pores（especially micropores and mesopores）. Micropores are predominantly determined by the content of the TOC,and mesopores are possibly related to the content of clay minerals,particularly the illite-montmorillonite mixed-layer content.

Imaging-Based Characterization of Perthite in the Upper Triassic Yanchang Formation Tight Sandstone of the Ordos Basin,China

This work investigated the element distribution of perthite from the Upper Triassic Yanchang Formation tight sandstone in the Ordos Basin of northern China by field emission scanning electron microscopy(FE-SEM) and energy dispersive spectrometer(EDS). FE-SEM results indicate significant differences in the morphology of Na-rich feldspar when K-rich feldspar is the main component of the perthite. EDS results show that different types of perthite have clearly defined differences on different element indexes. Additionally, indexes such as average-weight-K(K-rich)/Na(Na-rich), maximumweight-K(Na-rich)/Na(Na-rich) and average-atomic-K(K-rich)/Na(Na-rich) might be the most effective ones to identify perthite types. Perthite is divided into six main types, i.e., perthite with thick parallel stripe distribution, with thin parallel stripe distribution, with lumpy stripe distribution, with dendritic stripe distribution, with encircling stripe distribution, and with mixed stripe distribution.

Origin and Distribution of Grain Dolostone Reservoirs in the Cambrian Longwangmiao Formation,Sichuan Basin,China

Dolostones in the Cambrian Longwangmiao Formation have become one of the most significant gas exploration domains in China. Over a trillion cubic meters of gas reservoirs have been discovered in the Gaoshiti-Moxi area; however, the origins and distribution of the dolostone reservoirs are not well understood. This work discussed the geology and geochemistry of the dolostone reservoirs in the Longwangmiao Formation to determine their origin and distribution. Two understandings are acquired： firstly, a carbonate ramp provided excellent conditions for grain beach deposition, while the presence of a hypersaline lake was favorable for the contemporaneous dolomitization of grain beach deposits. Petrographic and geochemical evidence further confirm that the Longwangmiao dolostone was formed during the contemporaneous stage. Secondly, the reservoir characteristics indicate that the grain beach sediments provide material basis for the development of the Longwangmiao dolostone reservoirs. Reservoir dissolution simulation experiments show that the porosity of the reservoirs was formed by dissolution during contemporaneous and burial stages. The dissolution pores formed during the contemporaneous stage were controlled by sequence interfaces. The large scale dissolution vugs formed during the burial stage subsequently spread along the pre-existing porosity and fracture zones. This study therefore identified that the development of grain dolostone reservoirs in a shallow water ramp under arid climatic conditions generally met the following conditions：（1） reefal beach deposits lay a foundation for reservoir development;（2） superficial conditions are an important determining factor for reservoir porosity; and（3） burial conditions provide environment for porosity preservation and modification.

Investigation of mechanical properties of bedded shale by nanoindentation tests: A case study on Lower Silurian Longmaxi Formation of Youyang area in southeast Chongqing, China

The mechanical properties such as Young's modulus, hardness and fracture toughness of Lower Silurian Longmaxi shale samples from Youyang area in southeast Chongqing, China were investigated using dot matrix nanoindentation measurements. With the help of field emission scanning electron microscope(FESEM) and energy dispersive X-ray fluorescence spectroscopy(EDS), the indentation morphology and mineral composition in indentation area were quantitatively analyzed. According to mechanical strength classification, a micromechanical model with three components was introduced and the Mori-Tanaka model was used to upscale mechanical parameters from nano-scale to centimeter-size scale, which were further compared with uniaxial compression results. The experimental results show that there is a positive linear correlation between Young's modulus and hardness and between the Young's modulus and the fracture toughness under nano-scale; the Young's modulus, hardness and fracture toughness perpendicular to the bedding are slightly lower than those parallel with the bedding. According to data statistics, the mechanical properties at the nano-scale follow Weibull distribution feature and the dispersion degree of hardness results is the highest, which is mainly due to shale anisotropy and nanoindentation projection uncertainty. Comparing the results from nanoindentation test, with those from upscaling model and uniaxial compression test shows that the mechanical parameters at the nano-scale are higher than those from upscaling model and uniaxial compression test, which proves mechanical parameters at different scales have differences. It's because the larger the core, the more pores and internal weakness it contains, the less accurate the interpreted results of mechanical parameters will be.

Predicting the present-day in situ stress distribution within the Yanchang Formation Chang 7 shale oil reservoir of Ordos Basin, central China

The Yanchang Formation Chang 7 oil-bearing layer of the Ordos Basin is important in China for producing shale oil.The present-day in situ stress state is of practical implications for the exploration and development of shale oil;however,few studies are focused on stress distributions within the Chang 7 reservoir.In this study,the present-day in situ stress distribution within the Chang 7 reservoir was predicted using the combined spring model based on well logs and measured stress data.The results indicate that stress magnitudes increase with burial depth within the Chang 7 reservoir.Overall,the horizontal maximum principal stress(SHmax),horizontal minimum principal stress(Shmin) and vertical stress(Sv) follow the relationship of Sv≥SHmax>Shmin,indicating a dominant normal faulting stress regime within the Chang 7 reservoir of Ordos Basin.Laterally,high stress values are mainly distributed in the northwestern parts of the studied region,while low stress values are found in the southeastern parts.Factors influencing stress distributions are also analyzed.Stress magnitudes within the Chang 7 reservoir show a positive linear relationship with burial depth.A larger value of Young's modulus results in higher stress magnitudes,and the differential horizontal stress becomes higher when the rock Young's modulus grows larger.

Effects of Temperature Gradient and Cooling Rate on the Formation of Methane Hydrates in Coarse Sand

Temperature gradient and cooling rate have an obvious effect on formation of methane hydrate. The process for formation of methane hydrate in coarse sand is monitored to tmderstand the relationship between temperature gradient and cooling rate and nucleation, growth and distribution of methane hydrate by using the electrical resistivity method. The results show that the change of resistivity can better reflect the nucleation and growth and distribution of methane hydrate. Temperature gradient promotes the nucleation, formation, and formation rate of methane hydrate. At a temperature gradient of 0.11℃/cm, the rate of methane hydrate formation and saturation reaches a maximum. Cooling rate has little effect on the methane hydrate formation process. Judging from the outcome of final spatial distribution of methane hydrate, the cooling rate has an obvious but irregular effect in coarse sand. The effect of tempera^re gradient on distribution of methane hydrate in coarse sand is less than that of cooling rate. At a temperature gradient of 0.07℃/cm, methane hydrate is distributed uniformly in the sample. If the temperature gradient is higher or lower than this value, the hydrate is enriched in the upper layer of sample.

Gap formation around Ω_e/2 and generation of low-band whistler waves by Landau-resonant electrons in the magnetosphere: Predictions from dispersion theory

In this paper we show that two significant phenomena of magnetospheric chorus emission can be explained by the participation of beam-like electron structures,created by Landau-resonant interaction with growing oblique whistler waves.The first concerns the widely observed spectral gap near half the electron cyclotron frequency Ωe;the second is related to the observation of very obliquely propagating lower-band waves that cannot be directly generated by temperature anisotropy.Concerning the gap,kinetic dispersion theory reveals that interference of the beam-related cyclotron mode ω~Ωe-kVb with the conventional whistler mode leads to mode splitting and the appearance of a ’forbidden’ area in the ω-k space.Thereby the beam velocity appears as an essential parameter.It is directly related to the phase velocity of the most unstable whistler wave mode,which is close to VAe/2 for sufficiently hot electrons(VAe is the electron Alfven velocity).To clarify the second point,we show that Landau-resonant beams with Vb Vb<VAe/2,which arise in cold plasmas from unstable upper-band waves,are able to generate lower-band whistler mode waves at very oblique propagation(θ≥60°).Our studies demonstrate the important role of Landau-resonant electrons in nonlinear whistler wave generation in the magnetosphere.

Sedimentary characteristics and processes of the Paleogene Dainan Formation in the Gaoyou Depression, North Jiangsu Basin, eastern China

In this paper,the type,vertical evolution,and distribution pattern of sedimentary facies of the Paleogene Dainan Formation in the Gaoyou Depression of the North Jiangsu Basin are studied in detail.Results show that fan delta,delta,nearshore subaqueous fan,and lacustrine facies developed during the Dainan Formation period and their distribution pattern was mainly controlled by tectonics and paleogeography.The fan delta and nearshore subaqueous fan facies predominantly occur in the southern steep slope region where fault-induced subsidence is thought to have created substantial accommodation,whereas the delta facies are distributed on the northern gentle slope which is thought to have experienced less subsidence.Finally,the lacustrine facies is shown to have developed in the center of the depression,as well as on the flanks of the fan delta,delta,and nearshore subaqueous fan facies.Vertically,the Dainan Formation represents an integrated transgressiveregressive cycle,with the E2d1being the transgressive sequence and the E2d2being the regressive sequence.This distribution model of sedimentary facies plays an important role in predicting favorable reservoir belts for the Dainan Formation in the Gaoyou Depression and similar areas.In the Gaoyou Depression,sandstones of the subaqueous distributary channels in the fan delta and the subaqueous branch channels in the delta are characterized by physical properties favorable for reservoir formation.

Diagenesis-porosity evolution and“sweet spot”distribution of low permeability reservoirs:A case study from Oligocene Zhuhai Formation in Wenchang A sag,Pear River Mouth Basin,northern South China Sea

The characteristics of low permeability reservoirs and distribution of sweet spots in the Oligocene Zhuhai Formation of Wenchang A sag, Pearl River Basin were investigated by core observation and thin section analysis. The study results show that there develop the fine, medium and coarse sandstone reservoirs of tidal flat–fan delta facies, which are of mostly low permeability and locally medium permeability. There are two kinds of pore evolution patterns: oil charging first and densification later, the reservoirs featuring this pattern are mainly in the third member of Zhuhai Formation between the south fault zone and the sixth fault zone, and the pattern of densification first and gas charging later is widespread across the study area. Strong compaction and local calcium cementation are the key factors causing low permeability of the reservoirs in the Zhuhai Formation. Thick and coarse grain sand sedimentary body is the precondition to form "sweet spot" reservoirs. Weak compaction and cementation, dissolution, early hydrocarbon filling and authigenic chlorite coating are the main factors controlling formation of "sweet spot" reservoir. It is predicted that there develop between the south fault and sixth fault zones the Class Ⅰ "sweet spot" in medium compaction zone, Class Ⅱ "sweet spot" in nearly strong compaction zone, Class Ⅲ "sweet spot" reservoir in the nearly strong to strong compaction zone with oil charging at early stage, and Class IV "sweet spot" reservoir in the strong compaction and authigenic chlorite coating protection zone in the sixth fault zone.

MEASUREMENTS OF PARTICLE NUMBER SIZE DISTRIBUTIONS AND NEW PARTICLE FORMATION EVENTS DURING WINTER IN THE PEARL RIVER DELTA REGION,CHINA

Particle number size distribution(PNSD) between 10 nm and 20 μm were measured in the Pearl River Delta(PRD) region in winter 2011.The average particle number concentration of the nucleation mode(10-20 nm),Aitken mode(20-100 nm),accumulation mode(100 nm-1μm) and coarse mode(1-20 μm) particles were 1 552,7 470,4 012,and 19 cm-3,respectively.The volume concentration of accumulation mode particles with peak at 300 nm accounted for over 70% of the total volume concentration.Diurnal variations and dependencies on meteorological parameters of PNSD were investigated.The diurnal variation of nucleation mode particles was mainly influenced by new particle formation events,while the diurnal variation of Aitken mode particles correlated to the traffic emission and the growth process of nucleation mode particles.When the PRD region was controlled by a cold high pressure,conditions of low relative humidity,high wind speed and strong radiation are favorable for the occurrence of new particle formation(NPF) events.The frequency of occurrence of NPF events was 21.3% during the whole measurement period.Parameters describing NPF events,including growth rate(GR) and source rate of condensable vapor(Q),were slightly larger than those in previous literature.This suggests that intense photochemical and biological activities may be the source of condensable vapor for particle growth,even during winter in the PRD.

Assessment of Spatial Distribution and Submerged Scope for Storm Surge in the Pearl River Delta Region

The aim of this study was to explore the spatial distribution and submerged scope for storm surge in the Pearl River Delta(PRD) region.Based on the data of storm surges in the PRD region in the past 30 years,the return periods of 12 tide-gauge stations for storm surges were calculated separately with the methods of Gumbel and Pearson-III.The data of another six tide-gauge stations in Guangdong Coast was quoted to depict the overall features of storm surges in Guangdong.Using least-square method,the spatial distribution models of storm surges in different return periods were established to reveal the distribution rule of the set-up values of storm surges.The spatial distribution curves of storm surges in different return periods in the PRD Region were drawn up based on the models and the terrain of Guangdong Coast.According to the curves,the extreme set-up values of storm surges in 1 000,100,10 a return periods were determined on each spot of Guangdong Coast.Applying the spatial analysis technology of ArcGIS,with the topography data of the PRD Region,the submerged scopes of flood caused by storm surge in 1 000,100,10 a return periods were drawn up.The loss caused by storm surges was estimated.Results showed that the storm surges and the topography of PRD region jointly led to the serious flood in the PRD region.This assessment would be useful for the planning and design department to make decision and provide government scientific basis for storm surge prediction,coastal engineering designing and the prevention of storm surge disaster.

Distribution of shallow water delta sand bodies and the genesis of thick layer sand bodies of the Triassic Yanchang Formation, Longdong Area, Ordos Basin

Based on the cores from 47 wells and logging data of 130 wells,the main types of sand bodies in the shallow water delta of the Chang 8_(2) sub-member in the Triassic Yanchang Formation,Longdong Area,Ordos Basin were comprehensively analyzed,the distribution characteristics of sand bodies more than 20 m thick were identified,and the genetic types of the thick sand bodies were sorted out.In this region,thick-bed sand bodies can be divided into two types according to the shape and position:type 1 is the sand body in wide strip and is distributed between the average high water mark and the average low water mark;type 2 is distributed on both sides of the average low water mark and is in irregular lump shape.Based on the principle of the volume distribution of sediments and the change rule of accommodation space,the genetic models of two types of thick-bed sand bodies in the Chang 8_(2) sub-member are superimposed distributary channel sand bodies in high accommodation space and superimposed composite sand bodies in low accommodation space.

Distribution characteristics, exploration and development, geological theories research progress and exploration directions of shale gas in China

The shale gas resources in China have great potential and the geological resources of shale gas is over 100×10^(12)m^(3),which includes about 20×10^(12)m^(3) of recoverable resources.Organic-rich shales can be divided into three types according to their sedimentary environments,namely marine,marine-continental transitional,and continental shales,which are distributed in 13 stratigraphic systems from the Mesoproterozoic to the Cenozoic.The Sichuan Basin and its surrounding areas have the highest geological resources of shale gas,and the commercial development of shale gas has been achieved in the Upper Ordovician Wufeng Formation-Lower Silurian Longmaxi Formation in these areas,with a shale gas production of up to 20×10^(9)m^(3) in 2020.China has seen rapid shale gas exploration and development over the last five years,successively achieving breakthroughs and important findings in many areas and strata.The details are as follows.(1)Large-scale development of middle-shallow shale gas(burial depth:less than 3500 m)has been realized,with the productivity having rapidly increased;(2)breakthroughs have been constantly made in the development of deep shale gas(burial depth:3500-4500 m),and the ultradeep shale gas(burial depth:greater than 4500 m)is under testing;(3)breakthroughs have been made in the development of normal-pressure shale gas,and the assessment of the shale gas in complex tectonic areas is being accelerated;(4)shale gas has been frequently discovered in new areas and new strata,exhibiting a great prospect.Based on the exploration and development practice,three aspects of consensus have been gradually reached on the research progress in the geological theories of shale gas achieved in China.(1)in terms of deep-water fine-grained sediments,organic-rich shales are the base for the formation of shale gas;(2)in terms of high-quality reservoirs,the development of micro-nano organic matter-hosted pores serves as the core of shale gas accumulation;(3)in terms of preservation conditions,weak structural transformation,a moderate degree of thermal evolution,and a high pressure coefficient are the key to shale gas enrichment.As a type of important low-carbon fossil energy,shale gas will play an increasingly important role in achieving the strategic goals of peak carbon dioxide emissions and carbon neutrality.Based on the in-depth study of shale gas geological conditions and current exploration progress,three important directions for shale gas exploration in China in the next five years are put forward.