A binary Fe-Al alloyed layer was synthesized on 45 steel by means of double glow plasma surface alloying technique. The corrosion-resisting layer prepared is composed of a sedimentary layer and a diffusion layer, with...A binary Fe-Al alloyed layer was synthesized on 45 steel by means of double glow plasma surface alloying technique. The corrosion-resisting layer prepared is composed of a sedimentary layer and a diffusion layer, with a total thickness of about 180 μm. The aluminum content of the alloyed layer shows gradual change from surface to the inside of substrate. The ideal profile is beneficial to the metallurgical bonding of the surface alloying layer with substrate materials. The microstructure of both layers consists of the Fe-Al intermetallic compound, which is FeAl with B2 structure in the sedimentary layer and Fe3Al with incompletely ordered DO3 structure in the diffusion layer. The protective film exhibits high micro-hardness. In comparison with the substrate of 45 steel, the corrosion resistance of the aluminized sample is much higher in 2.0% Na2S and 0.05 mol/L Na2SO4 + 0.5 mol/L NaCl mixed solutions.展开更多
The crack-free Ni60 A coating was fabricated on 45 steel substrate by laser cladding and the microstructure including solidification characteristics, phases constitution and phase distribution was systematically inves...The crack-free Ni60 A coating was fabricated on 45 steel substrate by laser cladding and the microstructure including solidification characteristics, phases constitution and phase distribution was systematically investigated. The high temperature friction and wear behavior of the cladding coating and substrate sliding against GCr15 ball under different loads was systematically evaluated. It was found that the coating has homogenous and fine microstructure consisting of γ（Ni） solid solution, a considerable amount of network Ni-Ni3 B eutectics, m^23C6 with the floret-shape structure and Cr B with the dark spot-shape structure uniformly distributing in interdendritic eutectics. The microhardness of the coating is about 2.6 times as much as that of the substrate. The coating produces higher friction values than the substrate under the same load condition, but the friction process on the coating keeps relatively stable. Wear rates of the coating are about 1/6.2 of that of the substrate under the higher load（300 g）. Wear mechanism of the substrate includes adhesion wear, abrasive wear, severe plastic deformation and oxidation wear, while that of the coating is merely a combination of mild abrasive wear and moderate oxidation wear.展开更多
The B Al permeation layers of Steel 45 were studied by means of SEM, TEM and XRD. The formation and growth model of permeation layer was proposed. The layer formation, growth and the migration behaviors of B were disc...The B Al permeation layers of Steel 45 were studied by means of SEM, TEM and XRD. The formation and growth model of permeation layer was proposed. The layer formation, growth and the migration behaviors of B were discussed. It is suggested that the diffusion of Al is deferred when the surface was covered by borides and aluminize compounds are surrounded by borides with the further growing of borides.展开更多
The restoration mechanism of twin-induced plasticity(TWIP)steel during friction stir welding(FSW)changed with the degree of the deformation,and the microstructure evolution and dynamic recrystallization are complex an...The restoration mechanism of twin-induced plasticity(TWIP)steel during friction stir welding(FSW)changed with the degree of the deformation,and the microstructure evolution and dynamic recrystallization are complex and unclear.In this paper,the electron backscattered diffraction and transmission electron microscopy techniques were used to evaluate the dynamic grain structure of FSW joint of TWIP steel.The results showed that the dynamic recrystallization mechanisms in TWIP steel during FSW contained discontinuous dynamic recrystallization(DDRX)and continuous dynamic recrystallization(CDRX).The recrystallization mechanism transitioned from DDRX at the initial deformation stage to DDRX and CDRX at the middle deformation stage,eventually becoming primarily CDRX at the end deformation stage.Numerous annealing twin boundaries(ATBs)were formed within the joint,and the straight ATBs primarily resulted from grain growth accidents,while cluster-shaped ATBs were formed through re-excitations and decomposition of specific grain boundaries.展开更多
基金Project(BK2005128) supported by the Natural Science Foundation of Jiangsu Province, China
文摘A binary Fe-Al alloyed layer was synthesized on 45 steel by means of double glow plasma surface alloying technique. The corrosion-resisting layer prepared is composed of a sedimentary layer and a diffusion layer, with a total thickness of about 180 μm. The aluminum content of the alloyed layer shows gradual change from surface to the inside of substrate. The ideal profile is beneficial to the metallurgical bonding of the surface alloying layer with substrate materials. The microstructure of both layers consists of the Fe-Al intermetallic compound, which is FeAl with B2 structure in the sedimentary layer and Fe3Al with incompletely ordered DO3 structure in the diffusion layer. The protective film exhibits high micro-hardness. In comparison with the substrate of 45 steel, the corrosion resistance of the aluminized sample is much higher in 2.0% Na2S and 0.05 mol/L Na2SO4 + 0.5 mol/L NaCl mixed solutions.
基金Project(2012AA040210)supported by the National High-Tech Research and Development Program of ChinaProject(510-C10293)supported by the Central Finance Special Fund to Support the Local University,ChinaProject(2010A090200048)supported by the Key Project of Industry,Education,Research of Guangdong Province and Ministry of Education,China
文摘The crack-free Ni60 A coating was fabricated on 45 steel substrate by laser cladding and the microstructure including solidification characteristics, phases constitution and phase distribution was systematically investigated. The high temperature friction and wear behavior of the cladding coating and substrate sliding against GCr15 ball under different loads was systematically evaluated. It was found that the coating has homogenous and fine microstructure consisting of γ（Ni） solid solution, a considerable amount of network Ni-Ni3 B eutectics, m^23C6 with the floret-shape structure and Cr B with the dark spot-shape structure uniformly distributing in interdendritic eutectics. The microhardness of the coating is about 2.6 times as much as that of the substrate. The coating produces higher friction values than the substrate under the same load condition, but the friction process on the coating keeps relatively stable. Wear rates of the coating are about 1/6.2 of that of the substrate under the higher load（300 g）. Wear mechanism of the substrate includes adhesion wear, abrasive wear, severe plastic deformation and oxidation wear, while that of the coating is merely a combination of mild abrasive wear and moderate oxidation wear.
文摘The B Al permeation layers of Steel 45 were studied by means of SEM, TEM and XRD. The formation and growth model of permeation layer was proposed. The layer formation, growth and the migration behaviors of B were discussed. It is suggested that the diffusion of Al is deferred when the surface was covered by borides and aluminize compounds are surrounded by borides with the further growing of borides.
基金supported by the National Natural Science Foundation of China(Nos.52034005,52227807,52104383,and 52222410)the Shaanxi Province National Science Fund for Distinguished Young Scholars(2022JC-24)+1 种基金the Key Research and Development Program of Shaanxi Province(2020ZDLGY13-06 and 2022JBGS2-01)the Scientific Research Program for Youth Innovation Team Construction of Shaanxi Provincial Department of Education(No.21JP058).
文摘The restoration mechanism of twin-induced plasticity(TWIP)steel during friction stir welding(FSW)changed with the degree of the deformation,and the microstructure evolution and dynamic recrystallization are complex and unclear.In this paper,the electron backscattered diffraction and transmission electron microscopy techniques were used to evaluate the dynamic grain structure of FSW joint of TWIP steel.The results showed that the dynamic recrystallization mechanisms in TWIP steel during FSW contained discontinuous dynamic recrystallization(DDRX)and continuous dynamic recrystallization(CDRX).The recrystallization mechanism transitioned from DDRX at the initial deformation stage to DDRX and CDRX at the middle deformation stage,eventually becoming primarily CDRX at the end deformation stage.Numerous annealing twin boundaries(ATBs)were formed within the joint,and the straight ATBs primarily resulted from grain growth accidents,while cluster-shaped ATBs were formed through re-excitations and decomposition of specific grain boundaries.
