FeOOH supported on organo-bentonite was prepared by organo-bentonite with good absorptive property,and the effects of dosage of the composite adsorbent,temperature,and Cr(Ⅵ)concentration on the removal rate of Cr(Ⅵ)...FeOOH supported on organo-bentonite was prepared by organo-bentonite with good absorptive property,and the effects of dosage of the composite adsorbent,temperature,and Cr(Ⅵ)concentration on the removal rate of Cr(Ⅵ)in the simulated wastewater were studied.The results indicated that the removal effect of Cr(Ⅵ)was good when the mass fraction of organo-bentonite was 3‰.The removal rate of Cr(Ⅵ)from the simulated wastewater could reach the maximum 98.37% under the following conditions:the dosage of the composite adsorbent was 1.0g;the temperature was 25℃;Cr(Ⅵ)concentration was 10mg/L;the oscillating time was 4h.展开更多
With the application of resins in various fields, numerous waste resins that are difficult to treat have been produced. The industrial wastewater containing Cr(Ⅵ) has severely polluted soil and groundwater environmen...With the application of resins in various fields, numerous waste resins that are difficult to treat have been produced. The industrial wastewater containing Cr(Ⅵ) has severely polluted soil and groundwater environments, thereby endangering human health. Therefore, in this paper, a novel functionalized mesoporous adsorbent PPR-Z was synthesized from waste amidoxime resin for adsorbing Cr(Ⅵ). The waste amidoxime resin was first modified with H3PO4 and ZnCl_(2), and subsequently, it was carbonized through slow thermal decomposition. The static adsorption of PPR-Z conforms to the pseudo-second-order kinetic model and Langmuir isotherm, indicating that the Cr(Ⅵ) adsorption by PPR-Z is mostly chemical adsorption and exhibits single-layer adsorption. The saturated adsorption capacity of the adsorbent for Cr(Ⅵ) could reach 255.86 mg/g. The adsorbent could effectively reduce Cr(Ⅵ) to Cr(Ⅲ) and decrease the toxicity of Cr(Ⅵ) during adsorption. PPR-Z exhibited Cr(Ⅵ) selectivity in electroplating wastewater. The main mechanisms involved in the Cr(Ⅵ) adsorption are the chemical reduction of Cr(Ⅵ) into Cr(Ⅲ) and electrostatic and coordination interactions. Preparation of PPR-Z not only solves the problem of waste resin treatment but also effectively controls Cr(Ⅵ) pollution and realizes the concept of “treating waste with waste”.展开更多
Pyrolysis has the potential of transforming waste into valuable recyclable products. Pyrolytic char(PC) is one of the most important products from the pyrolysis of used tires. One of the most significant applications ...Pyrolysis has the potential of transforming waste into valuable recyclable products. Pyrolytic char(PC) is one of the most important products from the pyrolysis of used tires. One of the most significant applications for pyrolytic char recovered is used for the removal of Cr(Ⅵ) in the wastewater effluent to control waste by waste. The surface chemistry properties of surface element distribution / concentration and chemical structure were examined for the pyrolytic char and the commercial activated carbon(CAC) respectively. The results showed that surfaces of PC possesses a large amount of ester and hydrocarbon graft, whereas there are mainly carbon functional components of C—OH, C O and COOH on the surface of CAC. Therefore the surface electronegativity of PC is lower than that of CAC in the water. The repulsive interactions between the surfaces of PC and the negatively charged Cr(Ⅵ) ion are weaker than that of CAC, which results in an intensification of the adsorption process by the utilization of PC. The adsorption isotherms of Cr(Ⅵ) ion on the two kinds of carbons were determined experimentally. The larger adsorption amount on the PC in the case of Cr(Ⅵ) may be attributed mainly to its special surface micro-chemical environment. The mechanism of the removal Cr(Ⅵ) from aqueous solution was assumed to be the integration of adsorption and redox reaction. The adsorption was the rate-controlled step for Cr(Ⅵ) removal. The adsorption of Cr(Ⅵ) was identified as pseudo-second-order kinetics. The rate constants of adsorption were evaluated.展开更多
文摘FeOOH supported on organo-bentonite was prepared by organo-bentonite with good absorptive property,and the effects of dosage of the composite adsorbent,temperature,and Cr(Ⅵ)concentration on the removal rate of Cr(Ⅵ)in the simulated wastewater were studied.The results indicated that the removal effect of Cr(Ⅵ)was good when the mass fraction of organo-bentonite was 3‰.The removal rate of Cr(Ⅵ)from the simulated wastewater could reach the maximum 98.37% under the following conditions:the dosage of the composite adsorbent was 1.0g;the temperature was 25℃;Cr(Ⅵ)concentration was 10mg/L;the oscillating time was 4h.
基金supported by the National Natural Science Foundation of China (No.52364022)the Natural Science Foundation of Guangxi Province,China (Nos.2023JJA160192 and 2021GXNSFAA220096)+1 种基金the Guangxi Science and Technology Major Project,China (No.AA23073018)the Guangxi Chongzuo Science and Technology Plan,China (No.2023ZY00503).
文摘With the application of resins in various fields, numerous waste resins that are difficult to treat have been produced. The industrial wastewater containing Cr(Ⅵ) has severely polluted soil and groundwater environments, thereby endangering human health. Therefore, in this paper, a novel functionalized mesoporous adsorbent PPR-Z was synthesized from waste amidoxime resin for adsorbing Cr(Ⅵ). The waste amidoxime resin was first modified with H3PO4 and ZnCl_(2), and subsequently, it was carbonized through slow thermal decomposition. The static adsorption of PPR-Z conforms to the pseudo-second-order kinetic model and Langmuir isotherm, indicating that the Cr(Ⅵ) adsorption by PPR-Z is mostly chemical adsorption and exhibits single-layer adsorption. The saturated adsorption capacity of the adsorbent for Cr(Ⅵ) could reach 255.86 mg/g. The adsorbent could effectively reduce Cr(Ⅵ) to Cr(Ⅲ) and decrease the toxicity of Cr(Ⅵ) during adsorption. PPR-Z exhibited Cr(Ⅵ) selectivity in electroplating wastewater. The main mechanisms involved in the Cr(Ⅵ) adsorption are the chemical reduction of Cr(Ⅵ) into Cr(Ⅲ) and electrostatic and coordination interactions. Preparation of PPR-Z not only solves the problem of waste resin treatment but also effectively controls Cr(Ⅵ) pollution and realizes the concept of “treating waste with waste”.
文摘Pyrolysis has the potential of transforming waste into valuable recyclable products. Pyrolytic char(PC) is one of the most important products from the pyrolysis of used tires. One of the most significant applications for pyrolytic char recovered is used for the removal of Cr(Ⅵ) in the wastewater effluent to control waste by waste. The surface chemistry properties of surface element distribution / concentration and chemical structure were examined for the pyrolytic char and the commercial activated carbon(CAC) respectively. The results showed that surfaces of PC possesses a large amount of ester and hydrocarbon graft, whereas there are mainly carbon functional components of C—OH, C O and COOH on the surface of CAC. Therefore the surface electronegativity of PC is lower than that of CAC in the water. The repulsive interactions between the surfaces of PC and the negatively charged Cr(Ⅵ) ion are weaker than that of CAC, which results in an intensification of the adsorption process by the utilization of PC. The adsorption isotherms of Cr(Ⅵ) ion on the two kinds of carbons were determined experimentally. The larger adsorption amount on the PC in the case of Cr(Ⅵ) may be attributed mainly to its special surface micro-chemical environment. The mechanism of the removal Cr(Ⅵ) from aqueous solution was assumed to be the integration of adsorption and redox reaction. The adsorption was the rate-controlled step for Cr(Ⅵ) removal. The adsorption of Cr(Ⅵ) was identified as pseudo-second-order kinetics. The rate constants of adsorption were evaluated.
