Stability analysis of longwall top-coal caving face in extra-thick coal seams based on an innovative numerical hydraulic support model

The relationship between support and surrounding rock is of great significance to the control of surrounding rock in mining process.In view of the fact that most of the existing numerical simulation methods construct virtual elements and stress servo control to approximately replace the hydraulic support problem,this paper establishes a new numerical model of hydraulic support with the same working characteristics as the actual hydraulic support by integrating numerical simulation software Rhino,Griddle and FLAC3D,which can realize the simulation of different working conditions.Based on this model,the influence mechanism of the supporting strength of hydraulic support on surrounding rock stress regulation and coal stability in front of the top coal caving face in extra thick coal seam were researched.Firstly,under different support intensity,the abutment pressure of the bearing coal and the coal in front of it presents the “three-stage”evolution characteristics.The influence range of support intensity is 15%–30%.Secondly,1.5 MPa is the upper limit of impact that the support strength can have on the front coal failure area.Thirdly,within a displacement range of 2.76 m from the coal wall,a support strength of1.5 MPa provides optimal control of the horizontal displacement of the coal.

LED-CAVE沉浸式虚拟现实技术在建筑EPC项目中的应用

研究一种基于LED-CAVE的沉浸式虚拟现实技术,结合建筑信息模型(BIM)技术,通过建(构)筑物及其环境的三维BIM模型与五面LED-CAVE显示系统进行整合,实现多人沉浸式的场景漫游功能。通过人机交互逻辑的开发与外部系统集成,应用于建筑EPC项目的设计、采购、施工等各个领域,可以实现方案设计的沉浸式体验与交流,真正实现所见即所得,提升方案设计的效率,加快方案设计的决策,为旧街区的改造提升方案设计提供有效的辅助和指导作用。

Gas effusion of full-mechanized top coal caving in Jiaoping Mine Area

According to the gas observational data,the gas spatiotemporal distributions were analyzed in full-mechanized top coal caving in thick,hard and high-gas seams.The factors influencing gas effusion were researched and the rules of gas effusion under the special conditions were educed,for example,the underground pressure,the output inten- sity,the working surface advancement,and the amount of ventilation in the working face on gas effusion,and so on.The research results can be the base of forecasting gas effu- sion and controlling gas in these special conditions,which can guarantee the safety of highly efficient full-mechanized top coal caving.

Numerical and theoretical study of large-scale failure of strata overlying sublevel caving mines with steeply dipping discontinuities

The deformation and fracture evolution mechanisms of the strata overlying mines mined using sublevel caving were studied via numerical simulations.Moreover,an expression for the normal force acting on the side face of a steeply dipping superimposed cantilever beam in the surrounding rock was deduced based on limit equilibrium theory.The results show the following:(1)surface displacement above metal mines with steeply dipping discontinuities shows significant step characteristics,and(2)the behavior of the strata as they fail exhibits superimposition characteristics.Generally,failure first occurs in certain superimposed strata slightly far from the goaf.Subsequently,with the constant downward excavation of the orebody,the superimposed strata become damaged both upwards away from and downwards toward the goaf.This process continues until the deep part of the steeply dipping superimposed strata forms a large-scale deep fracture plane that connects with the goaf.The deep fracture plane generally makes an angle of 12°-20°with the normal to the steeply dipping discontinuities.The effect of the constant outward transfer of strata movement due to the constant outward failure of the superimposed strata in the metal mines with steeply dipping discontinuities causes the scope of the strata movement in these mines to be larger than expected.The strata in the metal mines with steeply dipping discontinuities mainly show flexural toppling failure.However,the steeply dipping structural strata near the goaf mainly exhibit shear slipping failure,in which case the mechanical model used to describe them can be simplified by treating them as steeply dipping superimposed cantilever beams.By taking the steeply dipping superimposed cantilever beam that first experiences failure as the key stratum,the failure scope of the strata(and criteria for the stability of metal mines with steeply dipping discontinuities mined using sublevel caving)can be obtained via iterative computations from the key stratum,moving downward toward and upwards away from the goaf.

沉浸式技术CAVE在宋韵文化及历史复现上的应用

在有关政策引导下,以CAVE(洞穴状自动虚拟环境)为代表的各类沉浸式技术逐渐进入公共文化教育空间,改进原有单一、单向的展陈模式,辅助传统文化和历史复现。以宋韵文化为例,CAVE系统的应用影响了人们对历史及当下的空间感知和文化认同。人们通过集体观看,在熟悉的现代性“酷”的技术视觉与文化中,认识到个体在历史中的血脉延续性,从而获得沉浸式的文化认同,维续了中华民族这一身份的连贯一致。进而,这一共享的文化认同通过创意产业带动经济发展,将文化价值转化为经济价值。

Urban Spatial Form Optimization Strategies Based on the Principle of Climate Adaptability of Regional Architecture: A Case Study of Traditional Cave Dwelling Villages in Northern Shaanxi Province

A multitude of climate-adaptive design approaches are embedded in regional architecture,which have a positive impact on addressing the deformed development of urban spatial patterns and the dual challenges of climate and resources.This paper examines the principles of climate adaptability embedded in the site layout and spatial organization characteristics of traditional cave dwelling villages in northern Shaanxi Province.The extracted climate adaptability principles are summarized,and the resulting design strategies that are well-suited to the contemporary urban space form are presented.Through analysis,it can be observed that traditional cave dwelling villages in northern Shaanxi are predominantly situated on south-facing slopes in proximity to water at low altitudes.These villages are characterized by compact building groups and east-west development,which is constrained by the elements of mountains and rivers.A two-level street system is generated,comprising streets parallel to the contour line and roadways perpendicular to the contour line.This results in the formation of a courtyard form enclosed by mountains.Such site layout and spatial organization exhibit excellent climate adaptability with regard to heat,ventilation,and wind storage.In light of the aforementioned considerations,the following urban spatial form design strategies are put forth:①the topographic height difference can be exploited to obtain sufficient sunshine;②the group shape can be optimized in order to reduce building energy consumption;③the best orientation of the building can be chosen to take account of both winter and summer conditions;④the height and length can be combined in order to form natural masking;⑤the D/H ratio of streets and roadways should be controlled to achieve a balance between heat gain and cooling of groups;⑥vents should be set appropriately to optimize group ventilation;⑦climate buffers should be established to increase the level of climate response.

Analysis of the Application of Span-Bridge Technology for Building Highway Tunnels that Go Over Solutional Caves

This article presents a real engineering project showcasing the application of span-bridge construction technology for building a highway that goes over a solutional cave.An overview of the project and the details of applying this technology in highway construction are provided.Besides,strategies for enhancing its construction quality are also proposed.The objective of this analysis is to improve the safety and quality of similar projects.

Effects of caving–mining ratio on the coal and waste rocks gangue flows and the amount of cyclically caved coal in fully mechanized mining of super-thick coal seams

Aimed at determining the appropriate caving–mining ratio for fully mechanized mining of 20 m thick coal seam, this research investigated the effects of caving–mining ratio on the flow fields of coal and waste rocks, amount of cyclically caved coal and top coal loss by means of numerical modeling. The research was based on the geological conditions of panel 8102 in Tashan coal mine. The results indicated the loose coal and waste rocks formed an elliptical zone around the drawpoint. The ellipse enlarged with decreasing caving–mining ratio. And its long axis inclined to the gob gradually became vertical and facilitating the caving and recovery of top coal. The top coal loss showed a cyclical variation; and the loss cycle was shortened with the decreasing in caving–mining ratio. Moreover, the mean squared error(MSE) of the amount of cyclically caved coal went up with increasing caving–mining ratio, indicating a growing imbalance of amount of cyclically caved coal, which could impede the coordinated mining and caving operations. Finally it was found that a caving–mining ratio of 1:2.51 should be reasonable for the conditions.

Application of Fuzzy-PID Control System in Full-Mechanized Coal Face

The control system, which includes structure, the composition of software and hardware, the form of PID control system and its systematic closed-loop, was used in No.4236 full-mechanized coal face of Xinlongzhuang mine. The typical fuzzy PID control system structure was investigated, and a simplified fuzzy PID control system was taken the place of the complex three-dimension fuzzy controller. Based on the parameter relation between fuzzy controller and normal PID controller, a common method of parameter adjustment of PID controller was summed up and the computer simulation was realized. This system can overcome the problems of large delay, nonlinear, poor running en- vironment and great load change in the full-mechanized coal face. The simulating investigation indicates that the de- signing method of fuzzy controller is simple and feasible.

A Darcy-Law Based Model for Heat and Moisture Transfer in a Hill Cave

A hill can be regarded as an environmental carrier of heat.Water,rocks and the internal moisture naturally pre-sent in such environment constitute a natural heat accumulator.In the present study,the heat and moisture trans-fer characteristics in a representative hill cave have been simulated via a method relying on the Darcy’s law.The simulations have been conducted for both steady and unsteady conditions to discern the influence of permeability and geometric parameters on the thermal and moisture transfer processes.The reliability of the simulation has been verified through comparison of the numerical results with the annual observation data.As revealed by the numericalfindings,the internal temperature of the hill accumulator is proportional to the permeability,outside surface temperature,overground height,underground constant temperature layer depth,and underground tem-perature of the hill,and it is inversely proportional to the horizontal size of the hill.Moreover,in the considered case,the order of magnitude of the permeability of the hill is contained in the range 10-15–10-13,and displays a certain sensitivity to the rainwater seepage.

The first cavefish in the Dinaric Karst?Cave colonization made possible by phenotypic plasticity in Telestes karsticus

Cave animals are an excellent model system for studying adaptive evolution.At present,however,little is known about the mechanisms that enable surface colonizers to survive in the challenging environment of caves.One possibility is that these species have the necessary genetic background to respond with plastic changes to the pressures of underground habitats.To gain insight into this process,we conducted a comparative study with the fish species Telestes karsticus,which occurs in a hydrological system consisting of an interconnected stream and a cave.Results showed that T.karsticus resided year-round and spawned in Sušik cave,making it the first known cavefish in the Dinaric Karst.Cave and surface populations differed in morphological and physiological characteristics,as well as in patterns of gene expression without any evidence of genetic divergence.To test whether observed trait differences were plastic or genetic,we placed adult fish from both populations under light/dark or constant dark conditions.Common laboratory conditions erased all morphometric differences between the two morphs,suggesting phenotypic plasticity is driving the divergence of shape and size in wild fish.Lighter pigmentation and increased fat deposition exhibited by cave individuals were also observed in surface fish kept in the dark in the laboratory.Our study also revealed that specialized cave traits were not solely attributed to developmental plasticity,but also arose from adult responses,including acclimatization.Thus,we conclude that T.karsticus can adapt to cave conditions,with phenotypic plasticity playing an important role in the process of cave colonization.

Reproductive seasonality of Astyanax mexicanus cavefish

DEAR EDITOR,The characiform fish Astyanax is a well-studied model system for understanding evolutionary development and genomics in cave biology.Nonetheless,considerable gaps remain in our understanding of its field ecology.Here,we conducted a fouryear field study and found that while cavefish spawned yearround,reproductive peaks occurred in January to February.

基于CAVE系统设计的绍兴历史文化街区活化研究

在数字化发展大背景下,传统历史文化街区的保护有了新思路,以绍兴鲁迅故里历史街区的活化项目为依托,对CAVE系统体感游戏设计进行研究探索。分析其整体系统组成和特点优势并且探讨该系统对传统历史文化街区保护改造的影响。通过个案研究,利用虚拟现实技术实现对历史遗存建筑和内部空间的创新发展,最终提出解决文化遗产保护和公众参观服务之间矛盾的有效方案,从而实现提升绍兴世界级古城IP、增加文化和旅游业态体验深度的目的。

Experimental study on the interrelation of multiple mechanical parameters in overburden rock caving process during coal mining in longwall panel

In order to comprehend the dynamic disaster mechanism induced by overburden rock caving during the advancement of a coal mining face, a physical simulation model is constructed basing on the geological condition of the 21221 mining face at Qianqiu coal mine in Henan Province, China. This study established, a comprehensive monitoring system to investigate the interrelations and evolutionary characteristics among multiple mechanical parameters, including mining-induced stress, displacement, temperature, and acoustic emission events during overburden rock caving. It is suggested that, despite the uniformity of the overburden rock caving interval, the main characteristic of overburden rock lies in its uneven caving strength. The mining-induced stress exhibits a reasonable interrelation with the displacement, temperature, and acoustic emission events of the rock strata. With the advancement of the coal seam, the mining-induced stress undergoes four successive stages: gentle stability, gradual accumulation, high-level mutation, and a return to stability. The variations in other mechanical parameters does not synchronize with the signifcant changes in mining-induced stress. Before the collapse of overburden rock occurs, rock strata temperature increment decreases and the acoustic emission ringing counts surges with the increase of rock strata displacement and mining-induced stress. Therefore, the collaborative characteristics of mining-induced stress, displacement, temperature, and acoustic emission ringing counts can be identifed as the precursor information or overburden rock caving. These results are in good consistent with on-site situation in the coal mine.

莫高窟壁画文创产品转喻设计方法研究

立足当下国内各区域文旅发展需求,构建文创产品转喻设计创新方法,促进多样化设计方案生成,并满足消费者对文创产品的深度文化体验和情感共鸣需求。通过内涵外延传承说的类层级结构的建立,挖掘、构建文化目的域内涵项与外延项两者间的传承关系;通过转喻映射三层级的建立,得出产品源域的多个映射结果,最终产生多样化的设计方案,并应用于莫高窟文创产品设计实践中。在转喻认知相邻逻辑视角下建立的“用户”“文化”“文创产品”多路径认知关联,为用户深度认知莫高窟文化提供了新的思路与方法。

绿色设计理念下皮革材料在现代窑洞民居室内设计中的创新应用

窑洞是我国西北部地区极具地域性特征的建筑。以绿色设计理念为核心,对皮革材料在现代窑洞民居设计中的创新性应用进行分析,着重强调了皮革材料在建筑装饰领域的应用优势,对窑洞这种中国传统民居与皮革材料的融合思路进行总结,认为皮革材料与现代窑洞民居室内设计需要着重强调发挥皮革材料的视觉与材质特征,将皮革材料与窑洞造型、民居需求等进行充分结合。

贵州绥阳麻黄洞壶穴形态特征及其成因分析

对贵州绥阳双河洞洞穴系统中的麻黄洞内发育于白云岩地下河床上的103处壶穴形态特征进行详细测量与统计分析,从统计学角度定量描述壶穴的形态特征及其形成因素。结果显示:麻黄洞壶穴以口大、肚小、底圆的“锅型”壶穴为主,壶穴在平面形态上主要以椭圆形壶穴为主,垂直剖面形态上以浅型和深型壶穴为主,其中A区和C区浅型壶穴占比最高,而B区则以深型壶穴最多;壶穴长、短轴在A区和B区相关性较高,而在C区相关性则较低,说明壶穴长、短轴变化在不同的区域所受的因素并不一样;麻黄洞壶穴主要由季节性水流、节理和裂隙、可溶性基岩、洞道形态、具有侵蚀力的推移质、洞穴的微气候要素及洞穴水的溶蚀作用等多种因素相互耦合而形成。研究结果可为洞穴的发育、演化提供相应的水文证据。

灵东煤矿上分层综放开采型煤相似材料模拟试验研究

以灵东煤矿为研究对象,采用室内试验、物理相似模拟、现场监测方法,选取了石膏+石子+水作为型煤相似材料,优化了材料配比,验证了相似材料的合理性。研究结果表明,石膏∶石子=1∶5,石膏∶水=0.6∶1,石子粒径为3~5 mm时,材料强度与原煤强度基本一致;选用该配比制作型煤时,模拟试验与现场监测的基本顶平均周期来压步距分别为11.3、12.2 m,误差仅为7.38%,表明该配比制作型煤进行物理相似模拟试验时可以反映现场覆岩真实变化规律。

我所经历的敦煌石窟文物修复

1956年,李云鹤途经敦煌,从此就留在这里学习修复壁画和塑像,再没有离开。通过不断学习、试验和探索,改进了实用的石窟壁画和塑像修复工具,创制了成熟有效的石窟文物修复工艺、修复方法。李云鹤对待工作的原则是:“对文物工作要有感情,把文物保护工作当作终身事业,并用一生去保护她。”

辽宁大连骆驼山早更新世巨副驼头骨化石

起源于中始新世的骆驼科(Camelidae)是一支在北美的新生代期间演化非常成功的类群,具有很大的多样性。其中的一类约在中中新世期间经白令陆桥迁徙到亚洲,随后扩散到欧洲和非洲。虽然骆驼科在北美新生代期间演化辐射出很多种类,但从北美扩散到旧大陆的骆驼只有一个族(Camelini)的两个属:副驼(Paracamelus)和骆驼(Camelus)。巨副驼(Paracamelus gigas)是我国境内最早发现的化石骆驼,一直被认为是起源于北美的Megatylopus之类的大型骆驼,然后扩散到旧大陆其他地区,最后演化成诺氏驼(Camelus knoblochi)及双峰驼(C.bactrianus)。但也有学者认为骆驼属起源于非洲。最近在大连复州湾骆驼山金远洞第四纪堆积剖面的第4层中出土了一些骆驼化石,其中1件破损的头骨和带有两枚下臼齿的残破下颌骨经研究被归入巨副驼。根据对巨副驼及其他副驼种的地理及年代分布的研究,巨副驼的直接祖先应该类似于晚上新世分布在欧亚大陆的体型稍小的阿氏副驼(P.alexejevi)或相似类型。大连出产的巨副驼在形态及大小上与诺氏驼接近,但其齿列长度略大于诺氏驼且明显大于野生双峰驼(C.ferus)及单峰驼(C.dromedarius)。而巨副驼与诺氏驼在地理分布上的重叠范围较大,时代分布上呈先后关系,因此可以认为巨副驼是诺氏驼的直接祖先,巨副驼在中更新世晚期通过P3收缩或简化及p3消失而演化成诺氏驼。综合化石层位的古地磁测年及花粉分析结果判断,巨副驼在早更新世的1.1~1.52 Ma期间栖息在大连半岛的森林草原环境中。