A spatiotemporal evolution model of a short-circuit arc to a secondary arc based on the improved charge simulation method

The initial shape of the secondary arc considerably influences its subsequent shape.To establish the model for the arcing time of the secondary arc and modify the single-phase reclosing sequence,theoretical and experimental analysis of the evolution process of the short-circuit arc to the secondary arc is critical.In this study,an improved charge simulation method was used to develop the internal-space electric-field model of the short-circuit arc.The intensity of the electric field was used as an independent variable to describe the initial shape of the secondary arc.A secondary arc evolution model was developed based on this model.Moreover,the accuracy of the model was evaluated by comparison with physical experimental results.When the secondary arc current increased,the arcing time and dispersion increased.There is an overall trend of increasing arc length with increasing arcing time.Nevertheless,there is a reduction in arc length during arc ignition due to short circuits between the arc columns.Furthermore,the arcing time decreased in the range of 0°-90°as the angle between the wind direction and the x-axis increased.This work investigated the method by which short-circuit arcs evolve into secondary arcs.The results can be used to develop the secondary arc evolution model and to provide both a technical and theoretical basis for secondary arc suppression.

Improvement Detecting Method of Optical Axes Parallelism of Shipboard Photoelectrical Theodolite Based on Image Processing

An improvement detecting method was proposed according to the disadvantages of testing method of optical axes parallelism of shipboard photoelectrical theodolite (short for theodolite) based on image processing. Pointolite replaced 0.2'' collimator to reduce the errors of crosshair images processing and improve the quality of image. What’s more, the high quality images could help to optimize the image processing method and the testing accuracy. The errors between the trial results interpreted by software and the results tested in dock were less than 10'', which indicated the improve method had some actual application values.

Isolation of the Flanking Sequences Adjacent to Transgenic T-DNA in Brassica napus Genome by an Improved Inverse PCR Method

[Objective] The research aimed to isolate flanking sequences adjacent to the transgenic T-DNA in Brassica napus by an improved inverse PCR method.[Method] Using single clone of transgenic FS4 in Brassica napus as the research materials,total DNA was extracted from transgenic Brassica napus by using modified CTAB method.After enzyme digestion and purification,self-joining was made.Two circles of nested PCR and the sequence alignment were carried out.[Result] A fragement with the size of 4.0 kb was amplified ...

GENERALIZED TRANSFER FUNCTION OF CONTROL SYSTEM AND AN IMPROVEMENT ON THE DECISION METHOD OF MOVEMENT STABILITY

In this paper the definitions of generalized transfer functios of control system and itscontinuity are presented.Using generalized transfer function as a tool,a set of theorems fordeciding movement stability have been constructed.Thus basing understanding of thecharacteristics of a control dynamics system on its measured procedure will simplify thedecision method of movement stability problems.

Fenlong Cultivation-the Fourth Set of Farming Methods Invented in China

The basic theory and effect of the new farming method of ＂Fenlong＂ cultivation which has been included in the main extension technology of Ministry of Agriculture of the People＇s Republic of China is fully illustrated for the first time, and it is the fourth set （generation） of farming modes and methods following manpower, animal and mechanical （tractor） farming. It follows the natural law to achieve soil activation, water saving, oxygen increase, warming and desalination through the active use of natural resources like soil, rainfall and solar energy, thereby promoting a new round of natural agricultural production and quality improvement and water con- servation, which has crop yield increase by 10%-30%, quality improvement of 5%, natural precipitation retaining increase by100%. The characteristics and mechanism are the use of spiral drill for one-time completion of the land preparation by drilling vertically to 30-50 cm of soil layer through high speed peeling. After instant high temperature and many fierce impacts, mechanical frictions, it could achieve the multiplication of the number of loose soil, soil physical modification and expansion of the soil nutrients, reservoirs, oxygen, microorganisms （＂Four pools＂）. Fenlong cultivation can give birth to new farming culture and civilization, and it can achieve the physical ＂desalinized＂ transformation and utilization of saline soil. The formation of Fenlong green farming technology system makes it possible to invent the farming tools of ＂serf-propelled Fenlong machinery＂ that has got the patent, and it is the method for farmland （dry land, paddy field） Fenlong cultivation, saline-alkali soil smash-ridging cultivation and for the abundance of grass ecology on degraded grassland. The application of Fenlong ＂4＋1＂ （arable, saline-alkali soil, grasslands, Sponge City＋rivers） green development in China can achieve the ＂double safety＂ of food and living space.

An Improved Method for DNA Extraction from the Faeces of Red Deer

[Objective] To introduce an improved method for DNA extraction from the faeces of red deer. [Method] Based on the traditional method of CTAB lysis, we proposed an improved DNA extraction method according to the characteristics of red deer faeces. [Result] This improved method extracted high-quality fecal DNA from Tianshan red deer and amplified the mitochondrial cytochrome b gene. With the muscle and fur DNA of red deer as the control, the sequencing results further con- firmed the reliability of the method. [Conclusion] The method requires no proteinase K in the process of extraction, and the extracted DNA can be used for PCR ampli- fication directly without the purification of DNA purification kit, thus, it is cost-saving.

A flexible multiscale algorithm based on an improved smoothed particle hydrodynamics method for complex viscoelastic flows

Viscoelastic flows play an important role in numerous engineering fields,and the multiscale algorithms for simulating viscoelastic flows have received significant attention in order to deepen our understanding of the nonlinear dynamic behaviors of viscoelastic fluids.However,traditional grid-based multiscale methods are confined to simple viscoelastic flows with short relaxation time,and there is a lack of uniform multiscale scheme available for coupling different solvers in the simulations of viscoelastic fluids.In this paper,a universal multiscale method coupling an improved smoothed particle hydrodynamics(SPH)and multiscale universal interface(MUI)library is presented for viscoelastic flows.The proposed multiscale method builds on an improved SPH method and leverages the MUI library to facilitate the exchange of information among different solvers in the overlapping domain.We test the capability and flexibility of the presented multiscale method to deal with complex viscoelastic flows by solving different multiscale problems of viscoelastic flows.In the first example,the simulation of a viscoelastic Poiseuille flow is carried out by two coupled improved SPH methods with different spatial resolutions.The effects of exchanging different physical quantities on the numerical results in both the upper and lower domains are also investigated as well as the absolute errors in the overlapping domain.In the second example,the complex Wannier flow with different Weissenberg numbers is further simulated by two improved SPH methods and coupling the improved SPH method and the dissipative particle dynamics(DPD)method.The numerical results show that the physical quantities for viscoelastic flows obtained by the presented multiscale method are in consistence with those obtained by a single solver in the overlapping domain.Moreover,transferring different physical quantities has an important effect on the numerical results.

Meshless Method for Analysis of Permeable Breakwaters in the Proximity of A Vertical Wall

In the present work, the improved version of the meshless singular boundary method(ISBM) is developed for analyzing the performance of bottom standing submerged permeable breakwaters in regular normally incident waves and in the proximity of a vertical wall. Both single and dual prismatic breakwaters of rectangular and trapezoidal forms are examined. The physical problem is cast in terms of the Laplace equation governing an irrotational flow and incompressible fluid motion with appropriate mixed type boundary conditions, and solved numerically using the ISBM. To model the permeability of the breakwaters fully absorbing boundary conditions are assumed. Numerical results are presented in terms of hydrodynamic quantities of the reflection coefficients. These are firstly validated against the results of a multi-domain boundary element method(BEM) developed independently for a previous study. The agreement between the results of the two methods is excellent. The coefficients of reflection are then computed and discussed for a variety of structural conditions including the breakwaters height, width, spacing, and absorbing permeability. Effects of the proximity of the vertical plane wall are also investigated. The breakwater's width is found to have only marginal effects compared with its height. Permeability tends to decrease the minimum reflections. These coefficients show periodic variations with the spacing relative to the wavelength. Trapezoidal breakwaters are found to be more cost-effective than the rectangular breakwaters. Dual breakwater systems are confirmed to perform much better than single structures.

A measurement method for distinguishing the real contact area of rough surfaces of transparent solids using improved Otsu technique

An experimental method of measuring the real contact area of transparent blocks based on the principle of total internal reflection is presented, intending to support the investigation of friction characteristics, heat conduction, and energy dissipation at the contact interface. A laser sheet illuminates the contact interface, and the transmitted laser sheet is projected onto a screen. Then the contact information is acquired from the screen by a camera. An improved Otsu method is proposed to process the data of experimental images. It can compute the threshold of the overall image and filter out all the pixels one by one. Through analyzing the experimental results, we describe the relationship between the real contact area and the positive pressure during a continuous loading process, at different loading rates, with the polymethyl methacrylate（PMMA）material. A hysteresis phenomenon in the relationship between the real contact area and the positive pressure is found and explained.

Analysis of the generalized Camassa and Holm equation with the improved element-free Galerkin method

In this paper, we analyze the generalized Camassa and Holm （CH） equation by the improved element-free Galerkin （IEFG） method. By employing the improved moving least-square （IMLS） approximation, we derive the formulas for the generalized CH equation with the IEFG method. A variational method is used to obtain the discrete equations, and the essential boundary conditions are enforced by the penalty method. Because there are fewer coefficients in the IMLS approximation than in the MLS approximation, and in the IEFG method, fewer nodes are selected in the entire domain than in the conventional EFG method, the IEFG method should result in a higher computing speed. The effectiveness of the IEFG method for the generalized CH equation is investigated by numerical examples in this paper.

Study of Mutual Improvement of Completed Weathered Phyllite and Red Clay Based on Neutralization Effects of Swelling and Shrinkage Deformation

Completely weathered phyllite(CWP)soil is a kind of special soil with high swell potential,while red clay is a special soil with high shrinkage.This means that these two kinds of special soils are usually not suitable for direct use as subgrade fill.To reduce the swell index of the CWP soil and the shrinkage of red clay at the same time,it was proposed to blend the CWP soil with red clay to improve their basic characteristics.A series of swell index tests and dry-wet cycle tests of the blended soils have been carried out at varying blending ratios,compaction coefficients and moisture contents.The test results show that the free swell index of the blended soil decreases with the increase of red clay,moisture content and compaction coefficient,respectively.The fissure density of the blended soil first decreases and then increases with the blending ratio,with the lowest being zero when the blending ratio is ranging from 20%to 40%.Through particle microscopic analysis and elemental composition analysis,it is found that the neutralization effect,the dilution effect of swell minerals,and the partition effect of coarse particles play an important role in restraining expansion and shrinkage deformation of the blended soil.Based on the liquid limit requirement of Chinese Railway Design Code(TB 10001-2016),the optimal blending ratio of red clay has been proposed to be 50%.Compared with the CWP soil,the free load swell index of the blended soil is reduced by 45.0%and the fissure density is reduced by 99.3%compared with that of red clay.Therefore,it is feasible to improve the CWP soil by blending it with red clay at an optimal ratio of 50%by using the neutralization effect of the expansion of CWP and shrinkage of red clay.

Performance Evaluation of Bottom-Standing Submerged Breakwaters in Regular Waves Using the Meshless Singular Boundary Method

In this paper, the improved version of the meshless singular boundary method (ISBM) is developed for analyzing the hydrodynamic performance of bottom-standing submerged breakwaters in regular normally incident waves. Both the single and dual prismatic breakwaters of rectangular and trapezoidal forms are examined. Only the impermeable breakwaters are considered in this study. The physical problem is cast in terms of the Laplace equation governing an irrotational flow and incompressible fluid motion with the appropriate mixed-type boundary conditions, and it is solved numerically using the ISBM. The numerical results are presented in terms of the hydrodynamic quantities of reflection and transmission coefficients. The values are first validated against the data of previous studies, computed, and discussed for a variety of structural conditions, including the height, width, and spacing of breakwater submergence. An excellent agreement is observed between the ISBM results and those of other methods. The breakwater width is found to feature marginal effects compared with the height. The present method is shown to accurately predict the resonant conditions at which the maximum reflection and transmission occur. The trapezoidal breakwaters are found to generally present a wide spectrum of reflections, suggesting that they would function better than the rectangular breakwaters. The dual breakwater systems are confirmed to perform much better than single structures.

An improved global-direction stencil based on the face-area-weighted centroid for the gradient reconstruction of unstructured finite volume methods

The accuracy of unstructured finite volume methods is greatly influenced by the gradient reconstruction, for which the stencil selection plays a critical role. Compared with the commonly used face-neighbor and vertex-neighbor stencils, the global-direction stencil is independent of the mesh topology, and characteristics of the flow field can be well reflected by this novel stencil. However, for a high-aspect-ratio triangular grid, the grid skewness is evident, which is one of the most important grid-quality measures known to affect the accuracy and stability of finite volume solvers. On this basis and inspired by an approach of using face-area-weighted centroid to reduce the grid skewness, we explore a method by combining the global-direction stencil and face-area-weighted centroid on high-aspect-ratio triangular grids, so as to improve the computational accuracy. Four representative numerical cases are simulated on high-aspect-ratio triangular grids to examine the validity of the improved global-direction stencil. Results illustrate that errors of this improved methods are the lowest among all methods we tested, and in high-mach-number flow, with the increase of cell aspect ratio, the improved global-direction stencil always has a better stability than commonly used face-neighbor and vertex-neighbor stencils. Therefore, the computational accuracy as well as stability is greatly improved, and superiorities of this novel method are verified.

Application of the Improved Kudryashov Method to Solve the Fractional Nonlinear Partial Differential Equations

Our purpose of this paper is to apply the improved Kudryashov method for solving various types of nonlinear fractional partial differential equations. As an application, the time-space fractional Korteweg-de Vries-Burger (KdV-Burger) equation is solved using this method and we get some new travelling wave solutions. To acquire our purpose a complex transformation has been also used to reduce nonlinear fractional partial differential equations to nonlinear ordinary differential equations of integer order, in the sense of the Jumarie’s modified Riemann-Liouville derivative. Afterwards, the improved Kudryashov method is implemented and we get our required reliable solutions where the results are justified by mathematical software Maple-13.

Motor relearning program and Bobath method improve motor function of the upper extremities in patients with stroke

BACKGROUND: In the natural evolution of cerebrovascular disease, unconscious use of affected extremity during drug treatment and daily life can improve the function of affected upper extremity partially, but it is very slow and also accompanied by the formation of abnormal mode. Therefore, functional training should be emphasized in recovering the motor function of extremity. OBJECTIVE: To observe the effects of combination of motor relearning program and Bobath method on motor function of upper extremity of patients with stroke. DESIGN: Comparison of therapeutic effects taking stroke patients as observation subjects. SETTING: Department of Neurology, General Hospital of Beijing Jingmei Group. PARTICIPANTS: Totally 120 stroke patients, including 60 males and 60 females, averaged (59±3) years, who hospitalized in the Department of Neurology, General Hospital of Beijing Jingmei Group between January 2005 and June 2006 were recruited. The involved patients met the following criteria: Stroke attack within 2 weeks; diagnosis criteria of cerebral hemorrhage or infarction made in the 4th National Cerebrovascular Disease Conference; confirmed by skull CT or MRI; Informed consents of therapeutic regimen were obtained. The patients were assigned into 2 groups according to their wills: rehabilitation group and control group, with 30 males and 30 females in each group. Patients in rehabilitation group averaged (59±2)years old, and those in the control group averaged (58±2)years old. METHODS: ① Patients in two groups received routine treatment in the Department of Neurology. When the vital signs of patients in the rehabilitation group were stable, individualized treatment was conducted by combined application of motor relearning program and Bobath method. Meanwhile, training of activity of daily living was performed according to the disease condition changes of patients at different phases, including the nursing and instruction of body posture, the maintenance of good extremity position, bed exercise, bedside sit up and sitting position balance, sit up exercise, dynamic and static balance exercise, walking exercise, active training and passive training. The strength, time and speed of training were increased gradually according to their physical abilities. Patients were trained 45 to 60 minutes once, 5 times a week, within 2 weeks. ② Evaluation criteria of therapeutic effect: The motor function of upper extremity was evaluated by Fugl-Meyer method on the day of beginning and end of treatment. Higher points indicated better function of upper extremity. ③ t test and paired t test were used for comparing the difference of intergroup and intragroup measurement data, respectively. MAIN OUTCOME MEASURES: Changes in Fugl-Meyer scoring of two groups before and after treatment. RESULTS: Totally 120 stroke patients participated in the final analysis. Before treatment, Fugl-Meyer scoring was close between rehabilitation group and control group [(14.47±2.38),(14.16±2.39) points, P > 0.05]; Fugl-Meyer scoring of rehabilitation group after treatment was significantly higher than that before treatment and that of control group[(37.93±2.67),(18.36±2.43) points, t =11.053, 5.408, P < 0.01]; There were no significant differences in Fugl-Meyer scoring between before treatment in the control group and control group (P > 0.05). CONCLUSION: Combined application of motor relearning program and Bobath method can significantly improve the motor function of upper extremity of patients with stroke.

Optimization of construction machinery scheme of cast-in-situ concrete based on the improved scatter degree method

The basic requirement of mechanical construction of cast-in-situ concrete is that it could not only conduct quality qualification and safety production, but also achieve most economic benefits with less investment under the condition to meet the needs of project duration. Therefore, the selection of construction machinery scheme plays an important role. However, in the actual construction, it is usually that operators rely on their own experience and field conditions to determine the mechanics. Such a method is subjective and arbitrary, and it is not conducive to make the construction rationally. Considering the above reasons, an improved weight coefficient method was used to establish an estimation model to estimate the construction machinery scheme of cast-in-situ concrete, so as to make the procedure much rational.

Correction of cosine oscillation to the improved correlation method of estimating the amplitude of gravitational background signal

In the measurement of G with the angular acceleration method,the improved correlation method developed by Wu et al.（Wu W H,Tian Y,Luo J,Shao C G,Xu J H and Wang DH 2016 Rev.Sci.Instrum.87 094501） is used to accurately estimate the amplitudes of the prominent harmonic components of the gravitational background signal with time-varying frequency.Except the quadratic slow drift,the angular frequency of the gravitational background signal also includes a cosine oscillation coming from the useful angular acceleration signal,which leads to a deviation from the estimated amplitude.We calculate the correction of the cosine oscillation to the amplitude estimation.The result shows that the corrections of the cosine oscillation to the amplitudes of the fundamental frequency and second harmonic components obtained by the improved correlation method are within respective errors.

Seasonal variability of the mixed layer depth determined using an improved maximum angle method in the Arctic basins

To investigate the spatiotemporal variations in the mixed layer depth(MLD)in the Arctic basins,a new criterion to determine the MLD,called the improved maximum angle method(IMAM),was developed.A total of 45123 potential density profiles collected using Ice-Tethered Profilers(ITPs)in the Arctic basins during 2005-2021 were used to demonstrate the method’s effectiveness.By comparing the results obtained by the fixed threshold method(FTM),percentage threshold method(PTM),and maximum gradient method(MGM)for profiles in the Canada Basin,Makarov Basin,and Eurasian Basin,we determined that the quality index(1.0 for perfect identification of the MLD)of the IMAM regarding the assessment of the MLD determination method reached 0.94,which is much greater than those of other criteria.Moreover,two types of the density profiles were identified based on the mixed layer development stage.The MLDs of the typical profiles determined using the IMAM were found to have better consistency with the original definition.By utilizing the new mixed layer criterion,the seasonal variations and regional differences in the MLD in the Arctic basins were analyzed.Spatially,the summer and winter MLDs in the Canada Basin were the shallowest(13.55 m in summer,26.76 m in winter)than those in the Makarov(29.51 m in summer,49.08 m in winter)and Eurasian(20.36 m in summer,46.81 m in winter)basins due to the stable stratification in the upper ocean and the subsequent small effects of dynamic and thermodynamic processes(wind-driven stirring and brine rejection)in the Canada Basin.Seasonally,in the three Arctic basins,the average MLD was shallowest(22.77 m)in summer;it deepened through autumn and reached a winter maximum(41.12 m).

A new method to identify and improve the purity of hybrid rice with herbicide resistant gene

There is a close relationship between the hy—brid rice production and seed purity.Two-linehybrid rice with higher heterosis is producedthrough the hybridization between a photo-thermo sensitive genetic male sterile(GMS) rice line and a paternal variety.But the fertili-

A STUDY OF THE XBS^+CATIONS(X=H,F,Cl)BY IMPROVED MS-X_α METHOD

By means of improved overlapping Muffin-Tin X_a method recently developed the ground state ~2and the first excited state ~2Σ^+ of the XBS^+(X=H,F,Cl)cations are studied.The calculated energies are in good agreement with experiment.The ionization potentials of sulphi- doborons,XBS(X=H,F,Cl,Br)are also computed and compared with photoelectron spectra re- sults.