Effects of electron beam welding parameters on the microstructure of titanium to aluminum alloy joints

Electron beam welding of titanium alloy to aluminum alloy was carried out by melting and melt-brazing to investigate the effects of welding parameters on microstructure of the joint. The results indicated that the joint of the specimen welded by melting was well-formed but contained a large amount of intermetallic compounds. These intermetallic compounds were mainly composed of brittle phases such as TiAl and TiAl3 that decreased the ductility of the joints and resulted in a tensile strength 50 % lower than that of the base metal. In the melt-brazing experiment, direct heat was applied to the aluminum alloy to melt the aluminum rather than the titanium alloy, creating a well-formed joint. The weld was mainly composed of Al element and only a 3 ~m thickness of intermetallic compounds formed near the fusion line at the Ti side. The ductility and the performauce of the joint were significantly improved compared with those of the melting-only joint. In addition, the tensile strength of the joint reached 80 % of that of the aluminum base metal.

Key Points of the Initial Actions for the Implementation of the Joint Statement

I. The parties held serious and productive discussions onthe actions each party will take in the initial phase for theimplementation of the Joint Statement of September 19,2005. The parties reaffirmed their common goal and will

Survey on the Loss Function of Deep Learning in Face Recognition

With the continuous development of face recognition network,the selection of loss function plays an increasingly important role in improving accuracy.The loss function of face recognition network needs to minimize the intra-class distance while expanding the inter-class distance.So far,one of our mainstream loss function optimization methods is to add penalty terms,such as orthogonal loss,to further constrain the original loss function.The other is to optimize using the loss based on angular/cosine margin.The last is Triplet loss and a new type of joint optimization based on HST Loss and ACT Loss.In this paper,based on the three methods with good practical performance and the joint optimization method,various loss functions are thoroughly reviewed.

Analysis of the concept of the negligence abettor

In Germany, Japan and in the Taiwan Region of our country, there is the long-standing debate about the joint negligence crime, and in the mainland of China, there are many scholars having discussed, but because the provisions on the joint crimes in the criminal law of our country exclude the joint negligence, the relevant discussions are not very sufficient. This paper talks about the views on the relevant issues of the joint negligence crimes, with the provisions on the traffic accident accomplice in the ＂Explanation of several issues concerning the specific application of law in the trial of criminal cases of traffic accidents＂ by the Supreme People＇s Court in 2000 as the starting point, in recognition of the negligent offender, the author further analyzes the constitution of the concept, in order to more clearly define the instigator of the negligent offender.

Coordination Model Research Based on Command Decision Joint Intension

Command Decision Simulation （CDS） is not only an important and difficult issue in the field of simulation, but also a technique issue to be tackled in the course of collective Modeling and Simulation in Joint Operations Experiment Center. CDS can give support to all kinds of simulation. Using computer to realize the Blue side＇s command deci- sion automatic execution in the operation training simulation system can improve training effect. Using computer to realize the lower level command unit＇s automatic command deci- sion can help to reduce the number of controllers and release them from heavy work. It can also enlarge simulation scale and increase the freedom of the simulation entity especially the command entity, thus enhance the authenticity and credibility of the simulation. Ac- cording to the command decision structure and the Joint Intention Theory, the thesis puts forward the method of making use of Coordination Matrix （CM） to realizing cooperation among the entities in CDS and constructs the calculation sketch of Task Execution, Task Monitoring and Task Replanning. At the same time, the thesis brings forward the CDS structure vision based on Partial Global Planning（PGP）. As CM is an indispensable part of combat simulation, the theory and the method of CDS will become an important part for the theory of Combat Simulation.