Genetic Variation Assessed with Microsatellites in Mass Selection Lines of the Pacific Oyster (Crassostrea gigas) in China

Abstract Four successive mass selection lines of the Pacific oyster, Crassostrea gigas, selected for faster growth in breeding pro- grams in China were examined at ten polymorphic microsatellite loci to assess the level of allelic diversity and estimate the effective population size. These data were compared with those of their base population. The results showed that the genetic variation of the four generations were maintained at high levels with an average allelic richness of 18.8-20.6, and a mean expected heterozygosity of 0.902-0.921. They were not reduced compared with those of their base population. Estimated effective population sizes based on temporal variances in microsatellite frequencies were smaller to that of sex ratio-corrected broodstock count estimates. Using a rela- tively large number ofbroodstock and keeping an equal sex ratio in the broodstock each generation may have contributed to retaining the original genetic diversity and maintaining relatively large effective population size. The results obtained in this study showed that the genetic variation was not affected greatly by mass selection progress and high genetic variation still existed in the mass selection lines, suggesting that there is still potential for increasing the gains in future generations of C. gigas. The present study provided im- portant information for future genetic improvement by selective breeding, and for the design of suitable management guidelines for genetic breeding of C. gigas.

Reconstructed annual glacier surface mass balance in theányêmaqên Mountains,Yellow River source,based on snow line altitude

Annual mass balance is an important factor that reflects glacier change and glacier meltwater resources.In this study,we analyzed the changes in glacier area,snow line altitude(SLA)and surface elevation in theányêmaqên Mountain region using multisource remote sensing data.Then,the annual mass balance of two glaciers was reconstructed by using SLA-mass-balance gradient method.The results showed that the glacier area in theányêmaqên Mountains decreased by 29.4 km2from 1985 to 2017.The average SLAs of the Halong Glacier and Yehelong Glacier were approximately 5290 m and 5188 m,respectively.The glacier mass balance for the two glaciers from 1990 to 2020 was-0.71 m w.e.a^(-1) and-0.63 m w.e.a^(-1),respectively.Our results indicate that SLA is an important indicator of glacier changes,and a long sequence of SLAs can more accurately reconstruct the glacier mass balance of the glacier.The mean annual glacial meltwater-fed streamflow is 1.45×10^(7)m^(3) and 1.12×10^(7)m^(3),respectively.Sensitivity analysis indicates that summer air temperature plays a leading role in regard to the influential climatic factors of glacial retreat in theányêmaqên Mountains.This highlights the potential of the methodology for application on reconstructing annual glacier surface mass balance at larger scales without direct measurements.

Chemical Selectivity of Laser Ion Source for on-Line Mass Separator

Thulium(Tm)atoms are resonantly ionized in a hot tube by stepwise excitations us-ing three dye lasers pumped by a series of copper vapor pulsed at a 10 kHz rate.The chemicalselectivity of the laser ion source is measured as a function of temperature of the tubes made ofTa,Nb-Zr and TaC.The chemical selectivity rises from 50 to 10000 with decreasing tube temp-erature and strongly depends on the tube material.A chemical selectivity of about 10000 withhigh efficiencies is obtained with the Nb-Zr and TaC tubes.Such a laser ion source can be usedin on-line mass separator to obtain isobarically pure ion beams.

Use of a TG-Bridge/Mass Spectrometry Method for On-line Monitoring the Emissions of Pine Needles Combustion

森林火灾排放物主要包含气体、挥发性有机化合物(VOCs)、和半挥发性有机化合物(SVOCs),这些物质会严重威胁消防队员和居民的健康。森林火灾烟气是一种包含固体颗粒、液体和气体化合物的复杂混合物。在火前锋附近(靠近消防队员)或者离火前锋很远(但靠近居民)的地方,当苯、甲苯、烯烃等有机化合物的浓度超过各健康安全组织规定的极限值,就可能对健康产生影响。本文给出了一种使用室内热重桥 质谱联用对炉内松针燃烧实验进行火前锋排放物在线监测的新方法。该燃烧实验被认为含氧量较低,这是真实森林火灾中通常的情形。使用这种方法测量得到的苯和甲苯的最大浓度分别是1050和2050ppm。CO2的最大浓度超过10.000ppm。

Mass Selection for Growth Improvement in Black Shell Line of Pacific Oyster Crassostrea gigas

The Pacific oyster,Crassostrea gigas,naturally distributing along the coast of northwest Pacific,is one of the most important bivalve species due to its high economic value and fecundity.In China,we have initiated a selective breeding program on both shell color and growth rate of C.gigas since 2010.A black shell line was obtained through four-generation family selection.In this study,mass selection for growth improvement was conducted in the sixth generation and seventh generation of black shell lines.To assess the progress of potential genetic improvement,the progeny of two generations of black shell lines were selected to evaluate their shell heights via a 450-day farming experiment.As the results,after growing for 450 days,the sixth generation and seventh generation of selected lines were 9.03% and 11.42% larger than the control lines,respectively.During the grow-out stage,the genetic gain of two generations was 8.82%±0.18% and 11.54%±0.43%,respectively;and the corresponding realized heritability was 0.45±0.04 and 0.41±0.04,respectively.These results indicated that the mass selection for shell height achieved steady progress in the two generations of C.gigas.

The processes and characteristics of mass balance on the Urumqi Glacier No. 1 during 1958-2009

As a solid reservoir, a glacier can regulate regional water resources. The annual net mass balance directly reflects the fluctuation of the glacier and climate variability. Based on 51 years of mass balance observation data, the mass balance of Tianshan Mountains Urumqi Glacier No. 1 experienced a nine times positive balance fluctuation and nine times negative balance fluctuation. There were 35 and 16 negative and positive balance years, respectively. From 1996/97 to 2008/09, 12 consecutive negative balance years were observed at Tianshan Mountains Urumqi Glacier No. 1. These results demon- strate that the Urumqi Glacier No. 1 is experiencing a strong negative balance, and the strongest negative balance, -931 mm w.e. （mm water equivalent）, during the observation period occurred in 2008. In addition, the cumulative mass balance reached 13,709 mm w.e. in 2008. However, in 2009, the mass balance was positive at 63 mm w.e. The equilibrium-line al- titude changes with the fluctuation in the mass balance, and the effective mass balance gradient is 7.4 mrn/m. In this paper, the headwaters of the Urumqi River were analyzed using meteorological data from 1958 to 2009, including the average seasonal temperature and precipitation. The results showed that the main factor associated with the mass balance variation of Glacier No. 1 is the fluctuation in the summer air temperature, followed by changes in the precipitation.

Identification of proteins of human colorectal carcinoma cell line SW480 by two-dimensional electrophoresis and MALDI-TOF mass spectrometry

AIM： To conduct bhe proteomic analysis of human colorectal carcinoma cell line, SW480 by using two-dimensional electrophoresis （2-DE） and matrix-assisted laser desorption /ionization-time of flight mass spectrometry （MALDITOFMS）. METHODS： The total proteins of human colorectal carcinoma cell line, SW480 were separated with 2-DE by using immobilized pH gradient strips and visualized by staining with silver nitrate. The gel images were acquired by scanner and 2-DE analysis software, Image Master 2D Elite. Nineteen distinct protein spots were excised from gel randomly and digested in gel by TPCK-trypsin. Mass analysis of the byptic digest peptides mixture was performed by using MALDI-TOF MS. Peptide mass fingerprints （PMFs） obtained by the MALDI-TOF analysis were used to search NCBI, SWISS-PROT and MSDB databases by using Mascot software. RESULTS： PMF maps of all spots were obtained by MALDI-TOF MS and thirteen proteins were preliminarily identified. CONCLUSION： The methods of analysis and identification of protein spots of tumor cells in 2-DE gel with silver staining by MALDI-TOF MS derived PMF have been established. Protein expression profile of SW480 has been obtained. It is demonstrated that a combination of proteomics and cell culture is a useful approach to comprehend the process of colon carcinogenesis.

Dynamic Promotional Resource Allocation for Segment Specific and Spectrum Effect of Promotion for a Product Line Incorporating Repeat Purchase Behavior

Promotion is an essential element in the marketing mix. It is used by businesses to inform, influence and persuade customers to adopt the products and services they offer. Without promotion, business would be stagnant and lack substantial growth because the brands would have low visibility in the market. Moreover, today’s vast and assorted markets comprise of customers with different needs and varied behavior. So it is rarely possible for companies to satisfy all customers by treating them alike. Thus there arises a need to divide the market into segments having customers with similar traits/characteristics. After identifying appropriate market segments, firms can design differentiated promotional campaigns for each segment. At the same time there can be a mass market promotional campaign that reaches different segments with a fixed spectrum. Also since promotional effort resources are limited, one must use them judiciously. In this paper, we formulate mathematical programming problem under repeat purchase scenario, which optimally allocates mass promotional effort resources and differentiated promotional effort resources across the segments dynamically in order to maximize the overall sales obtained from multiple products of a product line under budgetary and minimum sales aspiration level constraint on each product under consideration in each segment. The planning horizon is divided into multi periods, the adoption pattern of each product in each segment is observed in every subinterval and accordingly promotional effort allocations are determined for the next period till we reach the end of planning period. The optimization model has been further extended to incorporate minimum aspiration level constraints on total sales for each product under consideration from all the segments taken together. The non linear programming problem so formulated is solved using differential evolution approach. A numerical example has been discussed to illustrate applicability of the model.

Dynamic Response Analysis of the Equivalent Water Depth Truncated Point of the Catenary Mooring Line

The real-time computer-controlled actuators are used to connect the truncated parts of moorings and risers in the active hybrid model testing system. This must be able to work in model-scale real time, based on feedback input from the floater motions. Thus, mooring line dynamics and damping effects are artificially simulated in real time, based on a computer-based model of the problem. In consideration of the nonlinear characteristics of the sea platform catenary mooring line, the equations of the mooring line motion are formulated by using the lumped-mass method and the dynamic response of several points on the mooring line is investigated by the time and frequency domain analysis method. The dynamic response of the representative point on the mooring line is analyzed under the condition of two different corresponding upper endpoint movements namely sine wave excitation and random wave excitation. The corresponding laws of the dynamic response between the equivalent water depth truncated points at different locations and the upper endpoint are obtained, which can provide technical support for further study of the active hybrid model test.

Minimizing Makespan on Mixed Mass Production Lines of Two and Three Machines

The objective of the research discussed in this paper has been to find an optimal schedule on mixed mass production lines of two and three machines. Johnson's rule on flow shops is generalized to mixed mass production lines. Scheduling methods on three-machine lines are proposed for six special kinds of data of processing times of jobs. The scheduling method on two-machine lines is also proposed.

MODEL OF OPERATING AND BALANCING ASSEMBLY LINE IN A MASS CUSTOMIZATION ENVIRONMENT

The successful implementation of mass customization lies on reengineeringtechnology and management methods to organize the production. Especially in assembly phase, variousproduct configurations, due-time penalties and order-driven strategy challenge the traditionaloperation and management of assembly lines. The business features and the operation pattern ofassembly line based on mass customization are analyzed. And the research emphatically studiesvarious technologic factors to improve customer satisfaction and their corresponding implementmethods in operating assembly line. In addition, the models are proposed for operating assembly lineunder dynamic process environment in mass customization. A genetic approach is developed to providethe optimal solution to the models. The effectiveness of the proposed approach is evaluated with anindustrial application.

Axial Vibration Analysis of the Mud Recovery Line on Deepwater Riserless Mud Recovery Drilling System

The series connection of multistage pumping module is the common concept of deepwater riserless mud recovery drilling system. In this system, the influence of the mass of pumping module on the vibration of mud recovery line cannot be ignored, and the lumped mass method has been utilized to discretize the mud recovery line. Based on the analysis of different boundary conditions, the paper establishes the axial forced vibration model of the mud recovery line considering the seawater damping, and the vibration model analysis provides the universal solution to the vibration model. An example of the two-stage pumping system has been used to analyze the dynamic response of mud recovery line under different excited frequencies. This paper has the important directive significance for the application of riserless mud recovery drilling technology in deepwater surface drilling.

OFF－LINE TWO－DIMENSIONAL GAS CHROMATOGRAPHY－MASS SPECTROMETRY FOR ANALYSIS OF ASSENTAL OIL OF MEDICINAL HERB：USE OF ABSORPTION TRAP AS INTERFACE

The use of an absorption trap off-line 2-DGC in conjunction with a mass spectrometer greatly improved the separation and identification of minor constituents of a complex mixtures such as a natural essential oil. The absorption trap device used as an interface of 2-DGC offered the advantage of convenient manipulation.

Methods for the Determination of Stable Isotopes of Carbon and Nitrogen Directly in Valine, Proline, Glutamine, and Glutamic Acid

Amino acids are very important compounds for the body and are involved in important functions that keep us healthy. Amino acids are essential components such as valine, proline, glutamine and glutamic acid. They can be synthesized either naturally or artificially. To examine the metabolism and regulate the synthesis process, compounds labeled with nitrogen or carbon isotopes need to be used. These isotopic compounds allow for more extensive research and enable studies that would otherwise be impossible. However, their use is dependent on the availability of simple, efficient methods for isotopic analysis. Currently, the determination of the atomic fraction of carbon and nitrogen isotopes is only possible through their conversion into molecular nitrogen or carbon monoxide or carbon dioxide. This leads to the loss of information about isotopic enrichment in specific centers of the molecule. This article explores a new direct approach to determining the atomic fraction of carbon and nitrogen isotopes in the isotope-modified or identical centers of these compounds. This method eliminates the transfer process and dilution due to nitrogen and carbon impurities. It is now possible to simultaneously determine the atomic fraction of nitrogen and carbon isotopes in the research substance. This method can be applied to amino acids, making it an effective tool for proposing new research methods. Several articles [1] [2] [3] have proposed similar methods for organic compounds and amino acids.

Model of an Atom by Analogy with the Transmission Line

Model of an atom by analogy with the transmission line is derived using Maxwell’s equations and Lorentz’ theory of electrons. To be realistic such a model requires that the product of the structural coefficient of Lecher’s transmission lines σ and atomic number Z is constant. It was calculated that this electromechanical constant is 8.27756, and we call it structural constant. This constant builds the fine-structure constant 1/α = 137.036, and with permeability μ, permittivity ε and elementary charge e builds Plank’s constant h. This suggests the electromagnetic character of Planck’s constant. The relations of energy, frequency, wavelength and momentum of electromagnetic wave in an atom are also derived. Finally, an equation, similar to Schrodinger’s equation, was derived, with a clear meaning of the wave function, which represents the electric or magnetic field strength of the observed electromagnetic wave.

The Structure of A Turbulent Jet in A Crossflow-Effect of Jet-Crossflow Velocity

A comprehensive numerical study on the three-dimensional structure of a turbulent jet in crossflow is performed. The jet-to-crossflow velocity ratio (R) varies in the range of 2 - 16; both vertical jets and inclined jets without excess streamwise momentum are considered. The numerical results of the Standard two-equation k-ε model show that the turbulent structure can be broadly categorised according to the jet-to-crossflow velocity ratio. For strong to moderate jet discharges, i.e. R> 4, the jet is characterized by a longitudinal transition through a bent-over phase during which the jet becomes almost parallel with the main freestream, to a sectional vortex-pair flow with double concentration maxima; the computed flow details and scalar mixing characteristics can be described by self-similar relations beyond a dimensionless distance of around 20-60. The similarity coefficients are only weakly dependent on R. The cross-section scalar field is kidney-shaped and bifurcated, vvith distinct double concentration maxima; the aspect ratio is found to be around 1.2. A loss in vertical momentum is ob-served and the added mass coefficient of the jet motion is found to be approximately 1. On the other hand, for weak jets in strong crossflow, i. e. R ≥ 2, the lee of the jet is characterized by a negative pressure region. Although the double vortex flow can stili be noted, the scalar field becomes more symmetrical and no longer bifurcated. The similarity coeffcients are al-so noticeably different. The predicted jet flovv characteristics and mixing rates are well supported by experimental and field dala

MASS BALANCE SENSITIVITY TO CLIMATE CHANGE: A CASE STUDY OF GLACIER NO. 1 AT URUMQI RIVERHEAD, TIANSHAN MOUNTAINS, CHINA

In this paper the degree day mass balance model is applied to the sensitivity test of mass balance/ELA(equilibrium line altitude) to climate change of Glacier No.1 at Urumqi Riverhead, the Tianshan Mountains, China. The results demonstrate that the mass balance of Glacier No.1, which is of continental type and accumulates in warm seasons, is less sensitive than that of a maritime glacier. On Glacier No.1, air temperature rise of 1℃ or precipitation increase by 20% can cause the ELA shift 81 m up or 31 m down respectively. Air temperature and precipitation play the different roles in the mass balance formation, in which the mass balance hypsometry follows the temperature variations by the means of rotation against the elevation axis and it shifts in parallel with precipitation change. Assuming a future temperature rise of 2 ℃ the mass losing trend on Glacier No.1 can not be radically alleviated even if there is a precipitation increase by 30%.

Dynamic mass variation and multiphase interaction among steel, slag, lining refractory and nonmetallic inclusions: Laboratory experiments and mathematical prediction

The mass transfer among the multiphase interactions among the steel, slag, lining refractory, and nonmetallic inclusions during the refining process of a bearing steel was studied using laboratory experiments and numerical kinetic prediction. Experiments on the system with and without the slag phase were carried out to evaluate the influence of the refractory and the slag on the mass transfer. A mathematical model coupled the ion and molecule coexistence theory, coupled-reaction model, and the surface renewal theory was established to predict the dynamic mass transfer and composition transformation of the steel, the slag, and nonmetallic inclusions in the steel. During the refining process,Al_(2)O_(3) inclusions transformed into Mg O inclusions owing to the mass transfer of [Mg] at the steel/refractory interface and(Mg O) at the slag/refractory interface. Most of the aluminum involved in the transport entered the slag and a small part of the aluminum transferred to lining refractory, forming the Al_(2)O_(3) or Mg O·Al_(2)O_(3). The slag had a significant acceleration effect on the mass transfer. The mass transfer rate(or the reaction rate) of the system with the slag was approximately 5 times larger than that of the system without the slag. In the first 20 min of the refining, rates of magnesium mass transfer at the steel/inclusion interface, steel/refractory interface, and steel/slag interface were x, 1.1 x, and 2.2 x,respectively. The composition transformation of inclusions and the mass transfer of magnesium and aluminum in the steel were predicted with an acceptable accuracy using the established kinetic model.

Spatio-temporal changes in the six major glaciers of the Chitral River basin(Hindukush Region of Pakistan)between 2001 and 2018

Glaciers in the northern Pakistan are a distinctive source of freshwater for the irrigation,drinking and industrial water supplies of the people living in those regions and downstream. These glaciers are under a direct global warming impact as indicated in many previous studies. In this study, we estimated the glacier dynamics in terms of Equilibrium Line Altitude(ELA), mass balance and the snout position variation using remote sensing data between 2001 and 2018. Six glaciers, having area≥ 20 km2 each, situated in the Chitral region(Hindukush Mountains) were investigated in this study. Digital Elevation Model(DEM) and available cloud-free continuous series of Landsat and Sentinel satellite images from minimum snow cover season were used to monitor the variability in the studied glaciers by keeping the status of glaciers in year 2001 as a reference. The annual climatic trends of mean temperature and total precipitation from Chitral weather station were detected using the nonparametric Mann-Kendall’s test. Results revealed a general increase in the ELA, decrease in the glacier mass balance and the retreat of snout position.Average upward shift in the ELA for the entire study area and data period was ~345 ± 93 m at a rate of^13 m.a-1 from the reference year’s position i.e.~4803 m asl. Estimated mean mass balance for the entire study area indicated a decline of-0.106 ± 0.295 m w.e. a-1. Periods of snout retreat and advance in different glaciers were found but the mean value over the entire study area was a retreat of-231 ± 140 m.No obvious relationship was found between the glacier variation trends and the available gauged climatic data possibly due to the presence of debris cover in ablation zones of all the studied glaciers which provides insulation and reduces the immediate climatic effects.

Rock mass response for lined rock caverns subjected to high internal gas pressure

The storage of hydrogen gas in underground lined rock caverns(LRCs)enables the implementation of the first fossil-free steelmaking process to meet the large demand for crude steel.Predicting the response of rock mass is important to ensure that gas leakage due to rupture of the steel lining does not occur.Analytical and numerical models can be used to estimate the rock mass response to high internal pressure;however,the fitness of these models under different in situ stress conditions and cavern shapes has not been studied.In this paper,the suitability of analytical and numerical models to estimate the maximum cavern wall tangential strain under high internal pressure is studied.The analytical model is derived in detail and finite element(FE)models considering both two-dimensional(2D)and three-dimensional(3D)geometries are presented.These models are verified with field measurements from the LRC in Skallen,southwestern Sweden.The analytical model is inexpensive to implement and gives good results for isotropic in situ stress conditions and large cavern heights.For the case of anisotropic horizontal in situ stresses,as the conditions in Skallen,the 3D FE model is the best approach.