The dynamic viscoelastic properties of asphalt AC-20 and its composites with Organic-Montmorillonite clay (OMMt) and SBS were modeled using the empirical Havriliak-Negami (HN) model, based on linear viscoelastic theor...The dynamic viscoelastic properties of asphalt AC-20 and its composites with Organic-Montmorillonite clay (OMMt) and SBS were modeled using the empirical Havriliak-Negami (HN) model, based on linear viscoelastic theory (LVE). The HN parameters, α, β, G0, G∞and τHN were determined by solving the HN equation across various temperatures and frequencies. The HN model successfully predicted the rheological behavior of the asphalt and its blends within the temperature range of 25˚C - 40˚C. However, deviations occurred between 40˚C - 75˚C, where the glass transition temperature Tg of the asphalt components and the SBS polymer are located, rendering the HN model ineffective for predicting the dynamic viscoelastic properties of composites containing OMMt under these conditions. Yet, the prediction error of the HN model dropped to 2.28% - 2.81% for asphalt and its mixtures at 100˚C, a temperature exceeding the Tg values of both polymer and asphalt, where the mixtures exhibited a liquid-like behavior. The exponent α and the relaxation time increased with temperature across all systems. Incorporating OMMt clay into the asphalt blends significantly enhanced the relaxation dynamics of the resulting composites.展开更多
An S-N curve fitting approach is proposed based on the weighted least square method, and the weights are inversely proportional to the length of mean confidence intervals of experimental data sets. The assumption coin...An S-N curve fitting approach is proposed based on the weighted least square method, and the weights are inversely proportional to the length of mean confidence intervals of experimental data sets. The assumption coincides with the physical characteristics of the fatigue life scatter. Two examples demonstrate the method. It is shown that the method has better accuracy and reasonableness compared with the usual least square method.展开更多
Based on probabilistic fracture mechanics approach, a new concept of material initial fatigue quality （MIFQ） is developed. Then, the relation between S-N curve and crack propagation curve is studied. From the study,...Based on probabilistic fracture mechanics approach, a new concept of material initial fatigue quality （MIFQ） is developed. Then, the relation between S-N curve and crack propagation curve is studied. From the study, a new durability analysis method is presented. In this method, S-N curve is used to determine crack growth rate under constant amplitude loading and evaluate the effects of different factors on durability and then the structural durability is analyzed. The tests and analyses indicate that this method has lower dependence on testing, and higher accuracy, reliability and generality and is convenient for application.展开更多
Based on the evolution of fatigue cracks in welded structures,the fatigue life of welded structures was defined as the sum of the crack initiation life Ni and the crack propagation life Np.Correspondingly,a fatigue-li...Based on the evolution of fatigue cracks in welded structures,the fatigue life of welded structures was defined as the sum of the crack initiation life Ni and the crack propagation life Np.Correspondingly,a fatigue-life analysis method combining S-N curves and fracture mechanics theory was proposed.The equivalent structural stress method and the lower 99%boundary of the master S-N curve were used to evaluate Ni,and cracks at the end of the initiation stage were considered as semi-elliptical surface cracks.Moreover,Paris equation and the stress intensity factor range of the cracks were used to evaluate Np.Furthermore,the fatigue test results obtained from the running girder of cranes were used as a reference for comparison and verification of the results.The results revealed that the equivalent structural stress is a good indicator for the crack initiation behavior of complex welded structures.In addition,the predicted fatigue life corresponded closely to the testing life.展开更多
When the historic probabilistic S-N curves are given under special survival probability and confidence levels and there is no possible to re-test, fatigue reliability analysis at other levels can not be done except fo...When the historic probabilistic S-N curves are given under special survival probability and confidence levels and there is no possible to re-test, fatigue reliability analysis at other levels can not be done except for the special levels. Therefore, the wide applied curves are expected. Monte Carlo reconstruction methods of the test data and the curves are investigated under fatigue life following lognormal distribution. To overcome the non-conservative assessment of existent man-made enlarging the sample size up to thousands, a simulation policy is employed to address the true production where the sample size is controlled less than 20 for material specimens, 10 for structural component specimens and the errors matching the statistical parameters are less than 5 percent. Availability and feasibility of the present methods have been indicated by the reconstruction practice of the test data and curves for 60Si2Mn high strength spring steel of railway industry.展开更多
ΔF-N curves are usually used to predict the fatigue life of spot welding in engineering,but they are time-consuming and laborious and not universal.For the purpose of predicting the fatigue life of spot welding accur...ΔF-N curves are usually used to predict the fatigue life of spot welding in engineering,but they are time-consuming and laborious and not universal.For the purpose of predicting the fatigue life of spot welding accurately and efficiently,tensile-shear fatigue tests were conducted to obtain the fatigue life of spot-welded specimens with different sheet thicknesses combinations.These specimens were simulated by using the finite element method,and the structural stress was theoretically calculated.In the double logarithmic coordinate system,the structural stress-fatigue life(S-N)curve of spot welding was fitted by the least-squares method,based on the quasi-Newton method.The square of the correlation coefficient of the S-N curve was taken as the optimization objective,with the correction coefficients of force,bending moment,spot welding diameter,and sheet thickness as the variables.During the optimization process,three different ways were utilized to get three optimized spot welding S-N curves,which are suitable for different situations.The results show that the fitting effect of the S-N curve is improved,the data points are more compact,and the optimization effect is significant.These S-N curves can be used to predict the fatigue life,which provide the basis for practical engineering application.展开更多
The knowledge of space and time distribution of short duration rainfall depths is of primary interest in hydrotechnical studies and in extreme floods modelling. This work is carried out to establish a ＂DDF （Depth-Du...The knowledge of space and time distribution of short duration rainfall depths is of primary interest in hydrotechnical studies and in extreme floods modelling. This work is carried out to establish a ＂DDF （Depth-Duration-Frequency）＂ relationship for the region of Annaba （Northeast of Algeria） through the examples of Pont Bouchet （El Hadjar）, Ain Berda and Chafia-Dam rainfall gauges. The results of the frequency study of stochastically generated annual series （Pearson＇s distribution type III model） and the regression analysis （least square method） permitted to develop a master curve that well describes heavy rainfalls distribution in the Annaba region. This 2-parameter model is used to predict, with sufficient accuracy, the amount of rain that could be recorded over a shorter duration from daily rainfall data in basins that lack recording rain gauges.展开更多
文摘The dynamic viscoelastic properties of asphalt AC-20 and its composites with Organic-Montmorillonite clay (OMMt) and SBS were modeled using the empirical Havriliak-Negami (HN) model, based on linear viscoelastic theory (LVE). The HN parameters, α, β, G0, G∞and τHN were determined by solving the HN equation across various temperatures and frequencies. The HN model successfully predicted the rheological behavior of the asphalt and its blends within the temperature range of 25˚C - 40˚C. However, deviations occurred between 40˚C - 75˚C, where the glass transition temperature Tg of the asphalt components and the SBS polymer are located, rendering the HN model ineffective for predicting the dynamic viscoelastic properties of composites containing OMMt under these conditions. Yet, the prediction error of the HN model dropped to 2.28% - 2.81% for asphalt and its mixtures at 100˚C, a temperature exceeding the Tg values of both polymer and asphalt, where the mixtures exhibited a liquid-like behavior. The exponent α and the relaxation time increased with temperature across all systems. Incorporating OMMt clay into the asphalt blends significantly enhanced the relaxation dynamics of the resulting composites.
文摘An S-N curve fitting approach is proposed based on the weighted least square method, and the weights are inversely proportional to the length of mean confidence intervals of experimental data sets. The assumption coincides with the physical characteristics of the fatigue life scatter. Two examples demonstrate the method. It is shown that the method has better accuracy and reasonableness compared with the usual least square method.
基金National Natural Science Foundation of China (60472118) High-tech Research Project of Jiangsu Province (BG2004008)
文摘Based on probabilistic fracture mechanics approach, a new concept of material initial fatigue quality （MIFQ） is developed. Then, the relation between S-N curve and crack propagation curve is studied. From the study, a new durability analysis method is presented. In this method, S-N curve is used to determine crack growth rate under constant amplitude loading and evaluate the effects of different factors on durability and then the structural durability is analyzed. The tests and analyses indicate that this method has lower dependence on testing, and higher accuracy, reliability and generality and is convenient for application.
基金Project was supported by the National Nature Science Foundation of China(51575408).
文摘Based on the evolution of fatigue cracks in welded structures,the fatigue life of welded structures was defined as the sum of the crack initiation life Ni and the crack propagation life Np.Correspondingly,a fatigue-life analysis method combining S-N curves and fracture mechanics theory was proposed.The equivalent structural stress method and the lower 99%boundary of the master S-N curve were used to evaluate Ni,and cracks at the end of the initiation stage were considered as semi-elliptical surface cracks.Moreover,Paris equation and the stress intensity factor range of the cracks were used to evaluate Np.Furthermore,the fatigue test results obtained from the running girder of cranes were used as a reference for comparison and verification of the results.The results revealed that the equivalent structural stress is a good indicator for the crack initiation behavior of complex welded structures.In addition,the predicted fatigue life corresponded closely to the testing life.
基金Project supported by the National High Technology Research and Development Program of China(863 Program) (No.2006AA04Z406)the National Natural Science Foundation of China (Nos.50375130, 50323003 and 50575189)+1 种基金the Special Foundation for the Authors of National Excellent Doctoral Dissertations (No.200234)the Program for New Century Excellent Talents in University(No.NCET040890)
文摘When the historic probabilistic S-N curves are given under special survival probability and confidence levels and there is no possible to re-test, fatigue reliability analysis at other levels can not be done except for the special levels. Therefore, the wide applied curves are expected. Monte Carlo reconstruction methods of the test data and the curves are investigated under fatigue life following lognormal distribution. To overcome the non-conservative assessment of existent man-made enlarging the sample size up to thousands, a simulation policy is employed to address the true production where the sample size is controlled less than 20 for material specimens, 10 for structural component specimens and the errors matching the statistical parameters are less than 5 percent. Availability and feasibility of the present methods have been indicated by the reconstruction practice of the test data and curves for 60Si2Mn high strength spring steel of railway industry.
基金Supported by National Natural Science Foundation of China(Grant Nos.U1534209,51675446)Independent Subject of State Key Laboratory of Traction Power(Grant No.2019TPL-T13).
文摘ΔF-N curves are usually used to predict the fatigue life of spot welding in engineering,but they are time-consuming and laborious and not universal.For the purpose of predicting the fatigue life of spot welding accurately and efficiently,tensile-shear fatigue tests were conducted to obtain the fatigue life of spot-welded specimens with different sheet thicknesses combinations.These specimens were simulated by using the finite element method,and the structural stress was theoretically calculated.In the double logarithmic coordinate system,the structural stress-fatigue life(S-N)curve of spot welding was fitted by the least-squares method,based on the quasi-Newton method.The square of the correlation coefficient of the S-N curve was taken as the optimization objective,with the correction coefficients of force,bending moment,spot welding diameter,and sheet thickness as the variables.During the optimization process,three different ways were utilized to get three optimized spot welding S-N curves,which are suitable for different situations.The results show that the fitting effect of the S-N curve is improved,the data points are more compact,and the optimization effect is significant.These S-N curves can be used to predict the fatigue life,which provide the basis for practical engineering application.
文摘The knowledge of space and time distribution of short duration rainfall depths is of primary interest in hydrotechnical studies and in extreme floods modelling. This work is carried out to establish a ＂DDF （Depth-Duration-Frequency）＂ relationship for the region of Annaba （Northeast of Algeria） through the examples of Pont Bouchet （El Hadjar）, Ain Berda and Chafia-Dam rainfall gauges. The results of the frequency study of stochastically generated annual series （Pearson＇s distribution type III model） and the regression analysis （least square method） permitted to develop a master curve that well describes heavy rainfalls distribution in the Annaba region. This 2-parameter model is used to predict, with sufficient accuracy, the amount of rain that could be recorded over a shorter duration from daily rainfall data in basins that lack recording rain gauges.
