Spatial electron-spin splitting in single-layered semiconductor microstructure modulated by Dresselhaus spin-orbit coupling

Combining theory and computation,we explore the Goos–H¨anchen(GH)effect for electrons in a single-layered semiconductor microstructure(SLSM)modulated by Dresselhaus spin–orbit coupling(SOC).GH displacement depends on electron spins thanks to Dresselhaus SOC,therefore electron spins can be separated from the space domain and spinpolarized electrons in semiconductors can be realized.Both the magnitude and sign of the spin polarization ratio change with the electron energy,in-plane wave vector,strain engineering and semiconductor layer thickness.The spin polarization ratio approaches a maximum at resonance;however,no electron-spin polarization occurs in the SLSM for a zero in-plane wave vector.More importantly,the spin polarization ratio can be manipulated by strain engineering or semiconductor layer thickness,giving rise to a controllable spatial electron-spin splitter in the field of semiconductor spintronics.

Imbibition Front and Phase Distribution in Shale Based on Lattice Boltzmann Method

To study the development of imbibition such as the imbibition front and phase distribution in shale,the Lattice Boltzmann Method(LBM)is used to study the imbibition processes in the pore-throat network of shale.Through dimensional analysis,four dimensionless parameters affecting the imbibition process were determined.A color gradient model of LBM was used in computation based on a real core pore size distribution.The numerical results show that the four factors have great effects on imbibition.The impact of each factor is not monotonous.The imbibition process is the comprehensive effect of all aspects.The imbibition front becomes more and more non-uniform with time in a heterogeneous pore-throat network.Some non-wetting phases(oil here)cannot be displaced out.The displacement efficiency and velocity do not change monotonously with any factor.The development of the average imbibition length with time is not smooth and not linear in a heterogeneous pore-throat network.Two fitting relations between the four dimensionless parameters and the imbibition velocity and efficiency are obtained,respectively.

Failure behaviors of anisotropic shale with a circular cavity subjected to uniaxial compression

Layered rock formations are frequently encountered during the excavation of underground structures. The stability of such structures is influenced not only by the stress concentration caused by the cavities in the strata but also by the anisotropy of the layered rock mass. The interaction between them can lead to critical structural failure, such as rupture, collapse, or significant deformation within the adjacent rock mass, thereby jeopardizing operational safety. However, the coupling law and mechanism between the stress concentration resulting from the cavities and the anisotropy of a layered rock mass remain unclear. In this study, a uniaxial compression test was performed on shale specimens containing a circular hole to investigate the effects of layer inclination and circular holes on the mechanical properties, elastic energy storage, and failure behaviors of these specimens. The failure mechanism of the rock surrounding the hole was analyzed on the basis of the single plane of weakness theory and the Kirsch solution. The test results indicated pronounced anisotropy in the compressive strength, elastic modulus, and elastic strain energy of the specimens, with distinct “V”, “M” and “U”-shaped patterns correlated with varying layer inclination angles. In addition, the combined effect of stress concentration and layer inclination resulted in different failure types, which were classified into four groups according to their failure behavior. Theoretical analysis revealed that failure around circular holes in layered rock is affected by a range of variables, such as layer inclination, layer strength, lateral pressure coefficient, azimuth, and loading stress.

Estimated Ultimate Recovery and Productivity of Deep Shale Gas Horizontal Wells

Pressure control in deep shale gas horizontal wells can reduce the stress sensitivity of hydraulic fractures and improve the estimated ultimate recovery(EUR).In this study,a hydraulic fracture stress sensitivity model is proposed to characterize the effect of pressure drop rate on fracture permeability.Furthermore,a production prediction model is introduced accounting for a non-uniform hydraulic fracture conductivity distribution.The results reveal that increasing the fracture conductivity leads to a rapid daily production increase in the early stages.However,above 0.50 D·cm,a further increase in the fracture conductivity has a limited effect on shale gas production growth.The initial production is lower under pressure-controlled conditions than that under pressure-release.For extended pressure control durations,the cumulative production initially increases and then decreases.For a fracture conductivity of 0.10 D·cm,the increase in production output under controlled-pressure conditions is~35%.For representative deep shale gas wells(Southern Sichuan,China),if the pressure drop rate under controlled-pressure conditions is reduced from 0.19 to 0.04 MPa/d,the EUR increase for 5 years of pressure-controlled production is 41.0 million,with an increase percentage of~29%.

RESEARCH ON IMPERFECTION SENSITIVE REGION OF SINGLE-LAYER LATTICED DOMES

The concept of the imperfection sensitive region is given. The advanced stochastic imperfection method is used to research the imperfection sensitive region of single-layer latticed domes. Taking a K6 single-layer latticed dome with a diameter of 50 m as an example, its imperfection sensitive region is made up of the first 12 kinds of joints. The influence of the imperfections of support joints on the stability of the K6 single-layer latticed dome is negligible. Influences of the joint imperfections of the main rib and the secondary rib on the structural stability are similar. The initial deviations of these joints all greatly lower the critical load of the dome. Results show that the method can analyze the structural imperfection sensitive region quantitatively and accurately.

Superconducting Single-Layer T-Graphene and Novel Synthesis Routes

Single-layer superconductors are ideal materials for fabricating superconducting nano devices.However,up to date,very few single-layer elemental superconductors have been predicted and especially no one has been successfully synthesized yet.Here,using crystal structure search techniques and ab initio calculations,we predict that a single-layer planar carbon sheet with 4-and 8-membered rings called T-graphene is a new intrinsic elemental superconductor with superconducting critical temperature(Tc)up to around 20.8 K.More importantly,we propose a synthesis route to obtain such a single-layer T-graphene,that is,a T-graphene potassium intercalation compound(C4 K with P4/mmm symmetry)is firstly synthesized at high pressure(>11.5 GPa)and then quenched to ambient condition;and finally,the single-layer T-graphene can be either exfoliated using the electrochemical method from the bulk C4 K,or peeled off from bulk T-graphite C4,where C4 can be obtained from C4 K by evaporating the K atoms.Interestingly,we find that the calculated Tc of C4 K is about 30.4 K at 0 GPa,which sets a new record for layered carbon-based superconductors.The present findings add a new class of carbon-based superconductors.In particular,once the single-layer T-graphene is synthesized,it can pave the way for fabricating superconducting devices together with other 2 D materials using the layer-by-layer growth techniques.

Dynamic behavior of single-layer latticed cylindrical shells subjected to seismic loading

The single-layer latticed cylindrical shell is one of the most widely adopted space-fl'amed structures.In this paper,free vibration properties and dynamic response to horizontal and vertical seismic waves of single-layer latticed cylindrical shells are analyzed by the finite element method using ANSYS software.In the numerical study,where hundreds of cases were analyzed,the parameters considered included rise-span ratio,length-span ratio,surface load and member section size.Moreover,to better define the actual behavior of single-layer latticed shells,the study is focused on the dynamic stress response to both axial forces and bending moments.Based on the numerical results,the effects of the parameters considered on the stresses are discussed and a modified seismic force coefficient method is suggested.In addition,some advice based on these research results is presented to help in the future design of such structures.

Ultra-thin circularly polarized lens antenna based on single-layered transparent metasurface

Circularly polarized （CP） lens antenna has been applied to numerous wireless communication systems based on its unique advantages such as high antenna gain, low manufacturing cost, especially stable data transmission between the transmitter and the receiver. Unfortunately, current available CP lens antennas mostly suffer from high profile, low aperture efficiency as well as complex design. In this paper, we propose an ultra-thin CP lens antenna based on the designed single- layered Pancharatnam-Berry （PB） transparent metasurface with focusing property. The PB metasurface exhibits a high transmissivity, which ensures a high efficiency of the focusing property. Launched the metasurface with a CP patch antenna at its focal point, a low-profile lens antenna is simulated and measured. The experimental results show that our lens antenna exhibits a series of advantages including high radiation gain of 20.7 dB, aperture efficiency better than 41.3%, and also narrow half power beam width （HPBW） of 13°at about 14GHz. Our finding opens a door to realize ultra-thin transparent metasurface with other functionalities or at other working frequencies.

Single-layer graphene as a highly selective barrier for vanadium crossover with high proton selectivity

We report near-zero crossover for vanadium cross-permeation through single-layer graphene immobilized at the interface of two Nafion?polymer electrolyte membranes.Vanadium ion diffusion and migration,including proton mobility through membrane composites,were studied with and without graphene under diffusion and migration conditions.Single-layer graphene was found to effectively inhibit vanadium ion diffusion and migration under specific conditions.The single-layer graphene composites also enabled remarkable ion transmission selectivity improvements over pure Nafion membranes,with proton transport being four orders of magnitude faster than vanadium ion transport.Resistivity values of 0.02±0.005Ωcm^(2) for proton and 223±4Ωcm^(2) for vanadium ion through single atomic layer graphene are reported.This high selectivity may have significant impact on flow battery applications or for other electrochemical devices where proton conductivity is required,and transport of other species is detrimental.Our results emphasize that crossover may be essentially completely eliminated in some cases,enabling for greatly improved operational viability.

Damage mechanism of single-layer reticulated domes under severe earthquakes

To study the damage mechanism of single-layer reticulated domes subject to severe earthquakes, three limit states of single-layer reticulated domes under earthquakes are defined firstly in this paper. Then, two failure modes are presented by analyzing damage behaviors, and their characteristics are pointed out respectively. Furthermore, the damage process is analyzed and the causes of structural damage in different levels are studied. Finally, by comparing deformation and vibration status of domes with different failure modes, the principles of different failures are revealed and an integrated frame of damage mechanism is set up.

Gap opening and tuning in single-layer graphene with combined electric and magnetic field modulation

The energy band structure of single-layer graphene under one-dimensional electric and magnetic field modulation is theoretically investigated. The criterion for bandgap opening at the Dirac point is analytically derived with a two-fold degeneracy second-order perturbation method. It is shown that a direct or an indirect bandgap semiconductor could be realized in a single-layer graphene under some specific configurations of the electric and magnetic field arrangement. Due to the bandgap generated in the single-layer graphene, the Klein tunneling observed in pristine graphene is completely suppressed.

Preliminary analysis of mode truncation of single-layered reticulated domes under earthquakes

In anti-seismic calculation, the mode truncation is a significant problem to engineers if the mode-superposition response spectrum method is used, which has not been completely solved yet in some large and complex structures such as reticulated domes. In this case, some useful advices, concentrating on the problem above, are expected through a careful and comprehensive investigation of this paper. During the investigation, the authors first point out shortcomings of former researches. Then frequency-spectrum characteristics of single-layered reticulated domes were studied from the perspective of structural responses. During this process, some important results such as the existence of the main resonant section, and the fact that the relative sensitivity of these domes under horizontal and vertical impulse varies with the different R/S ratios were achieved. Furthermore, based on the study of frequency-spectrum characteristics, as well as that of earthquake input, reasonable numbers of mode truncation in single layered reticulated domes with different R/S ratio were presented. Results of case studies prove the mode truncation number proposed is valid.

Nanoscale mass sensing based on vibration of single-layered graphene sheet in thermal environments

Based on vibration analysis, single-layered graphene sheet （SLGS） with multiple attached nanoparticles is developed as nanoscale mass sensor in thermal environments. Graphene sensors are assumed to be in simplysupported configuration. Based on the nonlocal plate the- ory which incorporates size effects into the classical theory, closed-form expressions lot the frequencies and relative fre- quency shills of SLGS-based mass sensor are derived using the Galerkin method. The suggested model is justified by a good agreement between the results given by the present model and available data in literature. The effects of tem- perature difference, nonlocal parameter, the location of the nanoparticle and the number of nanoparticles on the relative frequency shift of the mass sensor are also elucidated. The obtained results show that the sensitivity of the SLGS- based mass sensor increases with increasing temperature difference.

Theoretical Proposal for a Planar Single-Layer Carbon That Shows a Potential in Superconductivity

Single-layer superconductors[1]have been the subject of considerable interests as they are ideal systems for the fundamental understanding of two-dimensional(2D)physics and for device applications.A few singlelayer superconductors are experimentally achieved(e.g.,FeSe,MoS2,and NbSe2[2-4]in the field where either charge doping or tensile strain is often required to promote the superconductivity.

A semi-analytical model for coupled flow in stress-sensitive multi-scale shale reservoirs with fractal characteristics

A large number of nanopores and complex fracture structures in shale reservoirs results in multi-scale flow of oil. With the development of shale oil reservoirs, the permeability of multi-scale media undergoes changes due to stress sensitivity, which plays a crucial role in controlling pressure propagation and oil flow. This paper proposes a multi-scale coupled flow mathematical model of matrix nanopores, induced fractures, and hydraulic fractures. In this model, the micro-scale effects of shale oil flow in fractal nanopores, fractal induced fracture network, and stress sensitivity of multi-scale media are considered. We solved the model iteratively using Pedrosa transform, semi-analytic Segmented Bessel function, Laplace transform. The results of this model exhibit good agreement with the numerical solution and field production data, confirming the high accuracy of the model. As well, the influence of stress sensitivity on permeability, pressure and production is analyzed. It is shown that the permeability and production decrease significantly when induced fractures are weakly supported. Closed induced fractures can inhibit interporosity flow in the stimulated reservoir volume (SRV). It has been shown in sensitivity analysis that hydraulic fractures are beneficial to early production, and induced fractures in SRV are beneficial to middle production. The model can characterize multi-scale flow characteristics of shale oil, providing theoretical guidance for rapid productivity evaluation.

Effect of fracture fluid flowback on shale microfractures using CT scanning

The field data of shale fracturing demonstrate that the flowback performance of fracturing fluid is different from that of conventional reservoirs,where the flowback rate of shale fracturing fluid is lower than that of conventional reservoirs.At the early stage of flowback,there is no single-phase flow of the liquid phase in shale,but rather a gas-water two-phase flow,such that the single-phase flow model for tight oil and gas reservoirs is not applicable.In this study,pores and microfractures are extracted based on the experimental results of computed tomography(CT)scanning,and a spatial model of microfractures is established.Then,the influence of rough microfracture surfaces on the flow is corrected using the modified cubic law,which was modified by introducing the average deviation of the microfracture height as a roughness factor to consider the influence of microfracture surface roughness.The flow in the fracture network is simulated using the modified cubic law and the lattice Boltzmann method(LBM).The results obtained demonstrate that most of the fracturing fluid is retained in the shale microfractures,which explains the low fracturing fluid flowback rate in shale hydraulic fracturing.

Electronic Structures and Optical Properties of Ga Doped Single-Layer Indium Nitride

Electronic structures and optical properties of single-layer In1-xGaxN are studied by employing Heyd-Scuseria-Ernzerh（HSE） method based on the first-principles. The band structure and density of states（DOS） of single-layer In1-xGaxN are calculated, and the band gap ranges from 1.8 eV to 3.8 eV as the ratio x changes, illustrating the potential for the tunability of band gap values via Ga doped. We also have investigated optical properties of single-layer In1-xGaxN such as dielectric function, refractive index and absorption coefficient, the main peak of dielectric function spectrum and the absorption edge are found to have a remarkable blue-shift as the concentration of Ga increases. Furthermore, the optical properties of single-layer In1-xGaxN are analyzed based on the band structures and DOS analysis. Such unique optical properties have profound application in nanoelectronics and optical devices.

Experimental and numerical simulation study on the erosion behavior of the elbow of gathering pipeline in shale gas field

During the production period of shale gas, proppant particles and rock debris are produced together,which will seriously erode the elbows of gathering pipelines. In response to this problem, this paper takes the elbow of the gathering pipeline in the Changning Shale Gas Field as an example to test the erosion rate and material removal mechanism of the test piece at different angles of the elbow through experiments and compares the four erosion models with the experimental results. Through analysis, it is found that the best prediction model for quartz sand-carbon steel erosion is the Oka model. Based on the Oka model, FLUENT software was used to simulate and analyze the law of erosion of the elbow of the gas gathering pipeline under different gas flow velocities, gas gathering pressure, particle size, length of L1,and bending directions of the elbow. And a spiral pipeline structure is proposed to reduce the erosion rate of the elbow under the same working conditions. The results show that this structure can reduce erosion by 34%.

Deposition mechanism of nano-structured single-layered C_(36) film on a diamond (100) crystal plane

The Brenner-LJ potential is adopted to describe the interaction between C36 clusters and diamond surface, and the deposition mechanism of multi-C36 clusters on the diamond surface is also studied by using the method of molecular dynamics simulation. The simulation results show that the competition effects of two interactions, i.e. the interaction between cluster and cluster and the interaction between cluster and crystal plane, are studied, and then the influence of these competition effects on C36 cluster deposition is analysed. The finding is that when an incident energy is appropriately chosen, C36 clusters can be chemically adsorbed and deposited steadily on the diamond surface in the form of single-layer, and in the deposition process the multi-C36 clusters present a phenomenon of energy transmission. The experimental result shows that at a temperature of 300K, in order to deposit C36 clusters into a steady nanostructured single-layered film, the optimal incident energy is between 10 and 18 eV, if the incident energy is larger than 18 eV, the C36 clusters will be deposited into an island nano-structured film.

On hydraulic falls of single-layer flow

Hydraulic falls of single-layer now are determined theoretically in terms of a time-dependent averaged fKdV equation(AfKdV equation)in phase coordinate. From the theory of the present paper it was known that difference of the asymptotic mean levels upstream and downsream at the subcritical cutoff points is just equal to a subcritical value of the AfKdV equation An experiment is carried out to examine the theoretical results. From comparison between theoreticaland experimental results, it was shown that they are in good agreement.At the same time, it should be pointed out that the theory of the present paper is agreement with the experimental and numerical results of Forbes and can be employed to find the generating properties of the precursor solitons at near-resonance.