Multiple Uplift and Exhumation of the Southeastern Tibetan Plateau:Evidence from Low-Temperature Thermochronology

Since the Cenozoic,the Tibetan Plateau has experienced large-scale uplift and outgrowth due to the India-Asia collision.However,the mechanism and timing of these tectonic processes still remain debated.Here,using apatite fission track dating and inverse thermal modeling,we explore the mechanism of different phases of rapid cooling for different batholiths and intrusions in the southeastern Tibetan Plateau.In contrast to previous views,we find that the coeval granitic batholith exposed in the same tectonic zone experienced differential fast uplift in different sites,indicating that the present Tibetan Plateau was the result of differential uplift rather than the entire lithosphere uplift related to lithospheric collapse during Cenozoic times.In addition,we also suggest that the 5-2 Ma mantle-related magmatism should be regarded as the critical trigger for the widely coeval cooling event in the southeastern Tibetan Plateau,because it led to the increase in atmospheric CO_(2)level and a hotter upper crust than before,which are efficient for suddenly fast rock weathering and erosion.Finally,we propose that the current landform of the southeastern Tibetan Plateau was the combined influences of tectonic and climate.

Deep tectonics and seismogenic mechanisms of the seismic source zone of the Jishishan M_(s)6.2 earthquake on December 18,2023,at the northeast margin of the Tibetan Plateau

On December 18,2023,an M_(s)6.2 earthquake occurred in Jishishan,Gansu Province,China.This earthquake happened in the eastern region of the Qilian Orogenic Belt,which is situated at the forefront of the NE margin of the Tibetan Plateau(i.e.,Qinghai-Tibet Plateau),encompassing a rhombic-shaped area that intersects the Qilian-Qaidam Basin,Alxa Block,Ordos Block,and South China Block.In this study,we analyzed the deep tectonic pattern of the Jishishan earthquake by incorporating data on the crustal thickness,velocity structure,global navigation satellite system(GNSS)strain field,and anisotropy.We discovered that the location of the earthquake was related to changes in the crustal structure.The results showed that the Jishishan M_(s)6.2 earthquake occurred in a unique position,with rapid changes in the crustal thickness,Vp/Vs,phase velocity,and S-wave velocity.The epicenter of the earthquake was situated at the transition zone between high and low velocities and was in proximity to a low-velocity region.Additionally,the source area is flanked by two high-velocity anomalies from the east and west.The principal compressive strain orientation near the Lajishan Fault is primarily in the NNE and NE directions,which align with the principal compressive stress direction in this region.In some areas of the Lajishan Fault,the principal compressive strain orientations show the NNW direction,consistent with the direction of the upper crustal fast-wave polarization from local earthquakes and the phase velocity azimuthal anisotropy.These features underscore the relationship between the occurrence of the Jishishan M_(s)6.2 earthquake and the deep inhomogeneous structure and deep tectonic characteristics.The NE margin of the Tibetan Plateau was thickened by crustal extension in the process of northeastward expansion,and the middle and lower crustal materials underwent structural deformation and may have been filled with salt-containing fluids during the extension process.The presence of this weak layer makes it easier for strong earthquakes to occur through the release of overlying rigid crustal stresses.However,it is unlikely that an earthquake of comparable or larger magnitude would occur in the short term(e.g.,in one year)at the Jishishan east margin fault.

3D v_P and v_S models of southeastern margin of the Tibetan plateau from joint inversion of body-wave arrival times and surface-wave dispersion data

A new 3D velocity model of the crust and upper mantle in the southeastern （SE） margin of the Tibetan plateau was obtained by joint inversion of body- and sur- face-wave data. For the body-wave data, we used 7190 events recorded by 102 stations in the SE margin of the Tibetan plateau. The surface-wave data consist of Rayleigh wave phase velocity dispersion curves obtained from ambient noise cross-correlation analysis recorded by a dense array in the SE margin of the Tibetan plateau. The joint inversion clearly improves the Vs model because it is constrained by both data types. The results show that at around 10 km depth there are two low-velocity anomalies embedded within three high-velocity bodies along the Longmenshan fault system. These high-velocity bodies correspond well with the Precambrian massifs, and the two located to the northeast of 2013 Ms 7.0 Lushan earthquake are associated with high fault slip areas during the 2008 Wenchuan earthquake. The aftershock gap between 2013 Lushan earthquake and 2008 Wenchuan earthquake is associated with low-velocity anomalies, which also acts as a barrier zone for ruptures of two earthquakes. Generally large earthquakes （M 〉 5） in the region occurring from 2008 to 2015 are located around the high-velocity zones, indicating that they may act as asperities for these large earthquakes. Joint inversion results also clearly show that there exist low-velocity or weak zones in the mid-lower crust, which are not evenly distributed beneath the SE margin of Tibetan plateau.

Quantifying Contribution of Recycled Moisture to Precipitation in Temperate Glacier Region,Southeastern Tibetan Plateau,China

Recycled moisture is an important indicator of the renewal capacity of regional water resources.Due to the existence of Yulong Snow Mountain,Lijiang in Yunnan Province,southeast of the Qinghai-Tibet Plateau,China,is the closest ocean glacier area to the equator in Eurasia.Daily precipitation samples were collected from 2017 to 2018 in Lijiang to quantify the effect of sub-cloud evaporation and recycled moisture on precipitation combined with the d-excess model during monsoon and non-monsoon periods.The results indicated that the d-excess values of precipitation fluctuated between–35.6‰and 16.0‰,with an arithmetic mean of 3.5‰.The local meteoric water line(LMWL)wasδD=7.91δ^(18)O+2.50,with a slope slightly lower than the global meteoric water line(GMWL).Subcloud evaporation was higher during the non-monsoon season than during the monsoon season.It tended to peak in March and was primarily influenced by the relative humidity.The source of the water vapour affected the proportion of recycled moisture.According to the results of the Hybrid Single-Particle Lagrangian Integrated Trajectory(HYSPLIT)model,the main sources of water vapour in Lijiang area during the monsoon period were the southwest and southeast monsoons.During the non-monsoon period,water vapour was transported by a southwesterly flow.The recycled moisture in Lijiang area between March and October 2017 was 10.62%.Large variations were observed between the monsoon and non-monsoon seasons,with values of 5.48%and 25.65%,respectively.These differences were primarily attributed to variations in the advection of water vapour.The recycled moisture has played a supplementary role in the precipitation of Lijiang area.

Joint Inversion of the 3D P Wave Velocity Structure of the Crust and Upper Mantle under the Southeastern Margin of the Tibetan Plateau Using Regional Earthquake and Teleseismic Data

The special seismic tectonic environment and frequent seismicity in the southeastern margin of the Qinghai-Tibet Plateau show that this area is an ideal location to study the present tectonic movement and background of strong earthquakes in China's Mainland and to predict future strong earthquake risk zones. Studies of the structural environment and physical characteristics of the deep structure in this area are helpful to explore deep dynamic effects and deformation field characteristics, to strengthen our understanding of the roles of anisotropy and tectonic deformation and to study the deep tectonic background of the seismic origin of the block＇s interior. In this paper, the three-dimensional （3D） P-wave velocity structure of the crust and upper mantle under the southeastern margin of the Qinghai-Tibet Plateau is obtained via observational data from 224 permanent seismic stations in the regional digital seismic network of Yunnan and Sichuan Provinces and from 356 mobile China seismic arrays in the southern section of the north-south seismic belt using a joint inversion method of the regional earthquake and teleseismic data. The results indicate that the spatial distribution of the P-wave velocity anomalies in the shallow upper crust is closely related to the surface geological structure, terrain and lithology. Baoxing and Kangding, with their basic volcanic rocks and volcanic clastic rocks, present obvious high-velocity anomalies. The Chengdu Basin shows low-velocity anomalies associated with the Quaternary sediments. The Xichang Mesozoic Basin and the Butuo Basin are characterised by low- velocity anomalies related to very thick sedimentary layers. The upper and middle crust beneath the Chuan-Dian and Songpan-Ganzi Blocks has apparent lateral heterogeneities, including low-velocity zones of different sizes. There is a large range of low-velocity layers in the Songpan-Ganzi Block and the sub-block northwest of Sichuan Province, showing that the middle and lower crust is relatively weak. The Sichuan Basin, which is located in the western margin of the Yangtze platform, shows high-velocity characteristics. The results also reveal that there are continuous low-velocity layer distributions in the middle and lower crust of the Daliangshan Block and that the distribution direction of the low-velocity anomaly is nearly SN, which is consistent with the trend of the Daliangshan fault. The existence of the low-velocity layer in the crust also provides a deep source for the deep dynamic deformation and seismic activity of the Daliangshan Block and its boundary faults. The results of the 3D P-wave velocity structure show that an anomalous distribution of high-density, strong-magnetic and high-wave velocity exists inside the crust in the Panxi region. This is likely related to late Paleozoic mantle plume activity that led to a large number of mafic and ultra-mafic intrusions into the crust. In the crustal doming process, the massive intrusion of mantle-derived material enhanced the mechanical strength of the crustal medium. The P-wave velocity structure also revealed that the upper mantle contains a low-velocity layer at a depth of 80-120 km in the Panxi region. The existence of deep faults in the Panxi region, which provide conditions for transporting mantle thermal material into the crust, is the deep tectonic background for the area＇s strong earthquake activity.

New Discovery of Holocene Activity along the Weixi-Qiaohou Fault in Southeastern Margin of the Tibetan Plateau and its Neotectonic Significance

Objective The lateral extrusion eastward of the Tibetan Plateau leads to the formation of the Sichuan–Yunnan block, which is the most representative active block in the southeastern margin of the Tibetan Plateau, characterized by strong and frequent seismicity(Li Ping et al., 1975; Zhang Peizhen et al., 2003; Li Yong et al., 2017). Its eastern boundary is composed of sinistral faults including the Xianshuihe, Xiaojiang faults, etc., and the western

Late Cretaceous Adakitic Granites of the Southeastern Tibetan Plateau: Garnet Fractional Crystallization of Arc-Like Magmas at the Thickened Neo-Tethyan Continental Margin

The tectonic setting of Cretaceous granitoids in the southeastern Tibet Plateau,east of the Eastern Himalaya Syntax,is debated.Exploration and mining of the Laba Mo–Cu porphyry-type deposit in the area has revealed Late Cretaceous granites.New and previously published zircon U–Pb dating indicate that the Laba granite crystallized at 89–85 Ma.Bulk-rock geochemistry,Sr–Nd isotopic data and in situ zircon Hf isotopic data indicate that the granite is adakitic and was formed by partial melting of thickened lower crust.The Ca,Fe,and Al contents decrease with increasing SiO2 content.These and other geochemical characteristics indicate that fractional crystallization of garnet under high-pressure conditions resulted in the adakitic nature of the Laba granite.Cretaceous granitoids are widespread throughout the Tibetan Plateau including its southeastern area,forming an intact curved belt along the southern margin of Eurasia.This belt is curved due to indenting by the Indian continent during Cenozoic,but strikes parallel to both the Indus–Yarlung suture zone and the Main Frontal Thrust belt.It is therefore likely that Cretaceous granitoids in both the Gangdese and southeastern Tibetan Plateau areas resulted from subduction of Neo-Tethyan lithosphere.

New insights of the Cenozoic Rotational Deformation of Crustal Blocks on the Southeastern Margin of the Tibetan Plateau and its Tectonic Implications

Objective The lateral extrusion of southeastern edge of the crustal materials around the Tibetan Plateau since the Oligocene is believed to be one of the main inducements of-1300 km latitudinal crustal convergence in the Tibetan Plateau, since the collision of India and Eurasia in the Paleogene. Two end-member models were used to describe the process of lateral extrusion of crustal material on the southeastern edge of the Tibetan Plateau. The ＂tectonic escape＂ model suggests the Indochina Block, Chuandian Fragment and Shan-Thai Block have experienced lateral extrusion along strike-slip fault systems, and the ＂crustal flow＂ model suggests that the upper crust has undergone southeastward escape in the form of ductile deformation, driven by viscous lower crustal flow channels. In addition, the GPS observations surrounding the Tibetan Plateau indicate that crustal materials currently experience clockwise rotation around the Eastern Himalaya syntaxis. This work conducted paleomagnetic studies in the Cretaceous and Paleogene red-beds along the southeastern margin of Tibetan Plateau,

Seismic Strain Energy Release of Active Faults in the Southeastern Margin of the Qinghai-Tibetan Plateau

Using the methods of the Gutenberg magnitude energy empirical formula and the Benioff seismic strain energy release curve,we make a systematic study on seismic strain energy release of historical earthquakes in the southeastern margin of the Qinghai-Tibetan Plateau since 1500.This paper provides a periodic table of the earthquake strain energy release in the fault zones and the fault block areas.The study shows that seismic strain energy release is strong in the east and south,and weak in the west and north.The overall seismic strain energy release of the Yushu-Xianshuihe-Xiaojiang fault system is consistent with the quasi-periodic pattern.The seismic cycle of some fault zones and fault block areas shows synchronization to a certain extent.The risk cannot be ignored in the current large release period of seismic strain energy in the southeastern margin of the Qinghai-Tibetan plateau.Local seismic risk analysis shows that seismic risk is very high on the Anninghe-Zemuhe and Xiaojiang fault zones.These dangerous zones need follow-up research.In future,it is necessary to combine different research methods to improve the reliability of seismic risk assessment.

Crustal thicknesses and Poisson's ratios beneath the Chuxiong-Simao Basin in the Southeast Margin of the Tibetan Plateau

In the Southeast Margin of the Tibetan Plateau, low-velocity sedimentary layers that would significantly affect the accuracy of the H-κ stacking of receiver functions are widely distributed.In this study, we use teleseismic waveform data of 475 events from 97 temporary broadband seismometers deployed by ChinArray Phase I to obtain crustal thicknesses and Poisson's ratios within the Chuxiong-Simao Basin and adjacent area, employing an improved method in which the receiver functions are processed through a resonance-removal filter, and the H-κ stacking is time-corrected.Results show that the crustal thickness ranges from 30 to 55 km in the study area, reaching its thickest value in the northwest and thinning toward southwest, southeast and northeast.The apparent variation of crustal thickness around the Red River Fault supports the view of southeastern escape of the Tibetan Plateau.Relatively thin crustal thickness in the zone between Chuxiong City and the Red River Fault indicates possible uplift of mantle in this area.The positive correlation between crustal thickness and Poisson's ratio is likely to be related to lower crust thickening.Comparison of results obtained from different methods shows that the improved method used in our study can effectively remove the reverberation effect of sedimentary layers.

Gravity pattern in southeast margin of Tibetan Plateau and its implications to tectonics and large earthquakes

There are many active faults in the southeast margin of Tibetan Plateau,where three large active faults zones,the Longmenshan,Xianshuihe and Anninghe,merge to form a"Y"shape.Strong crustal deformation and a complicated fault distribution accompany strong earthquake activity in this zone.In this paper,we investigate a multi-scale gravity anomaly in the southeastern margin of the Tibetan Plateau using the wavelet transform;we find that the pattern of the gravity field is closely related to the fault system in the study area.Analyzing the characteristics of this Bouguer gravity anomaly at different orders indicates that the eastern Himalayan syntaxis has produced a strong eastward push during its northward movement,resulting in a shortening of the crust from west to east and a rapid uplift of the Tibetan Plateau.The Songpan–Garzêand Sichuan–Yunnan blocks have been forced to slip and extrude southward and eastward laterally.The distributions of seven large earthquakes from 1970 to 2018 reflects the relationship between large earthquakes and characteristics of the gravity anomaly.Comparing the tectonic backgrounds of several earthquakes reveals that the large earthquakes occur usually in the high gravity anomaly gradient zone,which corresponds in general to the boundary zones of the blocks.We infer that large earthquakes occur primarily in high Bouguer gravity anomaly zones in the upper crust,while low Bouguer gravity anomalies encompass the lower crust and the uppermost mantle.

Crustal strain rates of southeastern Tibetan Plateau derived from GPS measurements and implications to lithospheric deformation of the Shan-Thai terrane

The link between the crustal deformation and mantle kinematics in the Tibetan Plateau has been well known thanks to dense GPS measurements and the relatively detailed anisotropy structure of the lithospheric mantle.However, whether the crust deforms coherently with the upper mantle in the Shan-Thai terrane(also known as the Shan-Thai block) remains unclear.In this study, we investigate the deformation patterns through strain rate tensors in the southeastern Tibetan Plateau derived from the latest GPS measurements and find that in the Shan-Thai terrane the upper crust may be coupled with the lower crust and the upper mantle.The GPS-derived strain rate tensors are in agreement with the slipping patterns and rates of major strike-slip faults in the region.The most prominent shear zone, whose shear strain rates are larger than 100×10^(–9) a^(–1), is about 1000-km-long in the west, trending northward along Sagaing fault to the Eastern Himalayan Syntaxis in the north, with maximum rate of compressive strain up to –240×10^(–9) a^(–1).A secondary shear zone along the Anninghe-Xiaojiang Fault in the east shows segmented shear zones near several conjunctions.While the strain rate along RRF is relatively low due to the low slip rate and low seismicity there, in Lijiang and Tengchong several local shear zones are present under an extensional dominated stress regime that is related to normal faulting earthquakes and volcanism, respectively.Furthermore, by comparing GPS-derived strain rate tensors with earthquake focal mechanisms, we find that 75.8%(100 out of 132) of the earthquake T-axes are consistent with the GPS-derived strain rates.Moreover, we find that the Fast Velocity Direction(FVDs) at three depths beneath the Shan-Thai terrane are consistent with extensional strain rate with gradually increasing angular differences, which are likely resulting from the basal shear forces induced by asthenospheric flow associated with the oblique subduction of the India plate beneath the Shan-Thai terrane.Therefore, in this region the upper crust deformation may be coherent with that of the lower crust and the lithospheric mantle.

Neotectonics of the Eastern Margin of the Tibetan Plateau: New Geological Evidence for the Change from Early Pleistocene Transpression to Late Pleistocene-Holocene Strike-slip Faulting

We present in this paper some new evidence for the change during the Quaternary in kinematics of faults cutting the eastern margin of the Tibetan Plateau. It shows that significant shortening deformation occurred during the Early Pleistocene, evidenced by eastward thrusting of Mesozoic carbonates on the Pliocene lacustrine deposits along the Minjiang upstream fault zone and by development of the transpressional ridges of basement rocks along the Anninghe river valley. The Middle Pleistocene seems to be a relaxant stage with local development of the intra-mountain basins particularly prominent along the Minjiang Upstream and along the southern segment of the Anninghe River Valley. This relaxation may have been duo to a local collapse of the thickened crust attained during the late Neogene to early Pleistocene across this marginal zone. Fault kinematics has been changed since the late Pleistocene, and was predominated by reverse sinistral strike-slip along the Minshan Uplift, reverse dextral strike-slip on the Longmenshan fault zone and pure sinistral strike-slip on the Anninghe fault. This change in fault kinematics during the Quaternary allows a better understanding of the mechanism by which the marginal ranges of the plateau has been built through episodic activities.

Crustal flow beneath the eastern margin of the Tibetan plateau

In large continental orogens, an important research topic is the behavior of deep crustal and upper mantle deformation, and the flow styles of ductile material. The morphology of the eastern margin of the Tibetan plateau, adjacent to the Sichuan basin, is characterized by very steep relief with high mountain ranges. The crust beneath this region slows the velocities in the middle and lower crust. We have adopted a relatively dense network to inverse the detailed structure of the crust and upper mantle along the eastern margin of the Tibetan plateau and Sichuan basin, using teleseismic data via receiver function analysis. The results are in-line with the hypothesis that viscous crustal material is flowing beneath the eastern margin of the Tibetan plateau and that this process drives overlying crustal material around the strong and rigid Sichuan basin. When the viscous material hits this obstruction, flows are divided into two or more branches with different directions. The upper part of the upwelling viscous flow produces the pressure to intrude the upper crust, thereby driving uplift of mountain ranges and high peaks. In contrast, the lower part of the downwelling viscous flow produces the pressure to intrude the lower crust and upper mantle to deepen the Moho discontinuity, causing observed crustal thickening.

Crustal Motion Characteristics in the Eastern Margin of the Tibetan Plateau and Adjacent Regions after the Wenchuan Earthquake

The Wenchuan earthquake has altered the crustal motion characteristics in the eastern margin of the Tibetan Plateau and adjacent regions.Using discontinuous GPS survey data for 2008–2012, the velocity field for the Eurasia reference framework has been obtained, and the general trend of contemporary crustal motion after the occurrence of the Wenchuan earthquake has been studied.In addition, using the velocity field, the block movement velocity has been estimated by least-squares fitting.Furthermore, the properties and displacement rates of main faults have been obtained from the differences in velocity vectors of the blocks on both sides of the faults.The results reveal that there are no obvious changes in the general characteristics of crustal motion in this area after the Wenchuan earthquake.The earthquake mainly changed the rate of the movement of the Chuan-Qing block and caused variation in the movement direction of the South China block.The effect of the earthquake on faults is mainly reflected in variations in fault displacement velocity; there is no fundamental change in the properties of fault activity.The displacement rates of the Xianshuihe fault decreased by 3–4 mm/a, the Longmenshan fault increased by 9–10 mm/a, and the northern segment of the Anninghe fault increased by approximately 9 mm/a.Furthermore, the displacement rates of the Minjiang, Xueshan, Huya, Longquanshan, and Xinjin faults increased by 2–3 mm/a.This implies that the effects of the Wenchuan earthquake on crustal movement can mainly be observed in the Chuan-Qing, South China, and N-Chuan-Dian blocks and their internal faults, as well as the Xianshuihe and Longmenshan faults and the northern section of the Anninghe fault.The reason for this is that the Wenchuan earthquake disturbed the kinematic and dynamic balance in the region.

Crustal Uplift in the Longmen Shan Mountains Revealed by Isostatic Gravity Anomalies along the Eastern Margin of the Tibetan Plateau

This study examines the relationship between high positive isostatic gravity anomalies （IGA）, steep topography and lower crustal extrusion at the eastern margin of the Tibetan Plateau. IGA data has revealed uplift and extrusion of lower crustal flow in the Longmen Shan Mountains （the LMS）. Firstly, The high positive IGA zone corresponds to the LMS orogenic belt. It is shown that abrupt changes in IGA correspond to zones of abrupt change of topography, crustal thickness and rock density along the LMS. Secondly, on the basis of the Airy isostasy theory, simulations and inversions of the positive IGA were conducted using three-dimensional bodies. The results indicated that the LMS lacks a mountain root, and that the top surface of the lower crust has been elevated by 11 km, leading to positive IGA, tectonic load and density load. Thirdly, according to Watts＇s flexural isostasy model, elastic deflection occurs, suggesting that the limited （i.e. narrow） tectonic and density load driven by lower crustal flow in the LMS have led to asymmetric flexural subsidence in the foreland basin and lifting of the forebulge. Finally, based on the correspondence between zones of extremely high positive IGA and the presence of the Precambrian Pengguan-Baoxing complexes in the LMS, the first appearance of erosion gravels from the complexes in the Dayi Conglomerate layer of the Chengdu Basin suggest that positive IGA and lower crustal flow in the LMS took place at 3.6 Ma or slightly earlier.

Application of the Material Balance Method in Paleoelevation Recovery: A Case Study of the Longmen Mountains Foreland Basin on the Eastern Margin of the Tibetan Plateau

We applied the material balance principle of the denudation volume and sedimentary flux to study the denudation-accumulation system between the Longmen Mountains （Mts.） and the foreland basin. The amount of sediment in each sedimentation stage of the basin was estimated to obtain the denudation volume, erosion thickness and deposit thickness since the Late Triassic Epoch, to enable us to recover the paleoelevation of the provenance and the sedimentary area. The results show the following： （1） Since the Late Triassic Epoch, the elevation of the surface of the Longmen Mts. has uplifted from 0 m to 2751 m, and the crust of the Longmen Mts. has uplifted by 9.8 km. Approximately 72% of the materials introduced have been denuded from the mountains. （2） It is difficult to recover the paleoelevation of each stage of the Longmen Mts. foreland basin quantitatively by the present-day techniques and data. （3） The formation of the Longmen Mts. foreland basin consisted of three stages of thrust belt tectonic load and three stages of thrust belt erosional unload. During tectonic loading stages （Late Triassic Epoch, Late Jurassic-Early Cretaceous, Late Cretaceous-Miocene）, the average elevation of Longmen Mts. was lower （approximately 700-1700 m）. During erosional unloading stages （Early and Middle Jurassic, Middle Cretaceous and Jiaguan, Late Cenozoic）, the average elevation of Longmen Mts. was high at approximately 2000-2800m.

Lithospheric Electrical Structure across the Eastern Segment of the Altyn Tagh Fault on the Northern Margin of the Tibetan Plateau

Project INDEPTH （InterNational DEep Profiling of Tibet and the Himalaya） is an interdisciplinary program designed to develop a better understanding of deep structures and mechanics of the Tibetan Plateau. As a component of magnetoteUuric （MT） work in the 4th phase of the project, MT data were collected along a profile that crosses the eastern segment of the Altyn Tagh fault on the northern margin of the plateau. Time series data processing used robust algorithms to give high quality responses. Dimensionality analysis showed that 2D approach is only valid for the northern section of the profile. Consequently, 2D inversions were only conducted for the northern section, and 3D inversions were conducted on MT data from the whole profile. From the 2D inversion model, the eastern segment of the Altyn Tagh fault only appears as a crustal structure, which suggests accommodation of strike slip motion along the Altyn Tagh fault by thrusting within the Qilian block. A large-scale off-proffie conductor within the mid-lower crust of the Qilian block was revealed from the 3D inversion model, which is probably correlated with the North Qaidam thrust belt. Furthermore, the unconnected conductors from the 3D inversion model indicate that deformations in the study area are generally localized.

Provenance and Paleogeography of the Late Cretaceous Mengyejing Formation,Simao Basin,Southeastern Tibetan Plateau

The Mengyejing potash salt deposit(MPSD)is the only pre-Quaternary potash salt deposit in China.The MPSD is located in the southern Simao Basin,southeastern Tibetan Plateau.The MPSD,along with rock salts and clastic rocks,

Investigation of plateau basin crustal structures and thickening mechanisms in the northeastern margin of the Tibetan plateau

This paper uses deep seismic sounding （DSS） data to contrast and analyze the crustal structures of three plateau basins （Songpan-Garze, Qaidam, Longzhong） in the northeastern margin of the Qinghai-Xizang （Tibetan） plateau, as well as two stable cratonic basins （Ordos, Sichuan） in its peripheral areas. Plateau basin crustal structures, lithological variations and crustal thickening mechanisms were investigated. The results show that, compared to the peripheral stable cratonic basins, the crystalline crusts of plateau basins in the northeastern margin are up to 10 15 km thicker, and the relative medium velocity difference is about 5% less. The medium velocity change in crustal layers of plateau basin indicates that the upper crust undergoes brittle deformation, whereas the lower crust deforms plastically with low velocity. The middle crust shows a brittle-to-plastic transition zone in this region. Thickening in the lower crust （about 5 10 km）, and rheological characteristics that show low- medium velocity （relatively reduced by 7%）, suggest that crustal thickening mainly takes place in lower crust in the northeastern margin of the Tibetan plateau. The crust along the northeastern margin shows evidence of wholesale block movement, and crustal shortening and thickening seem to be the main deformation features of this region. The GPS data show that the block motion modes and crustal thickening in the Tibetan plateau is closely related to the peripheral tectonic stress field and motion direction of the Indian plate. The Mani-Yushu- Xianshuihe fold belt along the boundary between the Qiangtang block and the Bayan Har block divides the different plateau thickening tectonic environments into the middle-western plateau, the northeastern margin and the southeastern plateau.